+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:15:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_H720X is not set
-
-#
-# IMX Implementations
-#
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
--- /dev/null
+/*
+ * arch/arm/mach-imx/mach-mx1ads.c
+ *
+ * Initially based on:
+ * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
+ * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/irqs.h>
+
+#include "devices.h"
+
+static int mx1ads_pins[] = {
+ /* UART1 */
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+ /* UART2 */
+ PB28_PF_UART2_CTS,
+ PB29_PF_UART2_RTS,
+ PB30_PF_UART2_TXD,
+ PB31_PF_UART2_RXD,
+ /* I2C */
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+ /* SPI */
+ PC13_PF_SPI1_SPI_RDY,
+ PC14_PF_SPI1_SCLK,
+ PC15_PF_SPI1_SS,
+ PC16_PF_SPI1_MISO,
+ PC17_PF_SPI1_MOSI,
+};
+
+/*
+ * UARTs platform data
+ */
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+/*
+ * Physmap flash
+ */
+
+static struct physmap_flash_data mx1ads_flash_data = {
+ .width = 4, /* bankwidth in bytes */
+};
+
+static struct resource flash_resource = {
+ .start = IMX_CS0_PHYS,
+ .end = IMX_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * I2C
+ */
+static struct pcf857x_platform_data pcf857x_data[] = {
+ {
+ .gpio_base = 4 * 32,
+ }, {
+ .gpio_base = 4 * 32 + 16,
+ }
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf8575", 0x22),
+ .platform_data = &pcf857x_data[0],
+ }, {
+ I2C_BOARD_INFO("pcf8575", 0x24),
+ .platform_data = &pcf857x_data[1],
+ },
+};
+
+/*
+ * Board init
+ */
+static void __init mx1ads_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx1ads_pins,
+ ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
+ /* UART */
+ mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
+ mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+
+ /* Physmap flash */
+ mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+ /* I2C */
+ i2c_register_board_info(0, mx1ads_i2c_devices,
+ ARRAY_SIZE(mx1ads_i2c_devices));
+
+ mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+}
+
+static void __init mx1ads_timer_init(void)
+{
+ mx1_clocks_init(32000);
+}
+
+struct sys_timer mx1ads_timer = {
+ .init = mx1ads_timer_init,
+};
+
+MACHINE_START(MX1ADS, "Freescale MX1ADS")
+ /* Maintainer: Sascha Hauer, Pengutronix */
+ .phys_io = IMX_IO_PHYS,
+ .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx1_map_io,
+ .init_irq = mx1_init_irq,
+ .timer = &mx1ads_timer,
+ .init_machine = mx1ads_init,
+MACHINE_END
+
+MACHINE_START(MXLADS, "Freescale MXLADS")
+ .phys_io = IMX_IO_PHYS,
+ .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx1_map_io,
+ .init_irq = mx1_init_irq,
+ .timer = &mx1ads_timer,
+ .init_machine = mx1ads_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+ .start = IMX_CS0_PHYS,
+ .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+ .width = 2,
+};
+
+static struct platform_device scb_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &scb_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+ {
+ .name = "address area",
+ .start = IMX_CS5_PHYS,
+ .end = IMX_CS5_PHYS + 1,
+ .flags = IORESOURCE_MEM, /* address access */
+ }, {
+ .name = "data area",
+ .start = IMX_CS5_PHYS + 4,
+ .end = IMX_CS5_PHYS + 5,
+ .flags = IORESOURCE_MEM, /* data access */
+ }, {
+ .start = IRQ_GPIOC(3),
+ .end = IRQ_GPIOC(3),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct platform_device dm9000x_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000x_resources),
+ .resource = dm9000x_resources,
+ .dev = {
+ .platform_data = &dm9000_platdata,
+ }
+};
+
+static int mxc_uart1_pins[] = {
+ PC9_PF_UART1_CTS,
+ PC10_PF_UART1_RTS,
+ PC11_PF_UART1_TXD,
+ PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+ return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+ mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+ ARRAY_SIZE(mxc_uart1_pins));
+ return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+ .init = uart1_mxc_init,
+ .exit = uart1_mxc_exit,
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &scb_flash_device,
+ &dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+ mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+ printk(KERN_INFO"Scb9328: Adding devices\n");
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+ mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+ .init = scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+ /* Sascha Hauer */
+ .phys_io = 0x00200000,
+ .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
+ .boot_params = 0x08000100,
+ .map_io = mx1_map_io,
+ .init_irq = mx1_init_irq,
+ .timer = &scb9328_timer,
+ .init_machine = scb9328_init,
+MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/irqs.h>
-
-#include "devices.h"
-
-static int mx1ads_pins[] = {
- /* UART1 */
- PC9_PF_UART1_CTS,
- PC10_PF_UART1_RTS,
- PC11_PF_UART1_TXD,
- PC12_PF_UART1_RXD,
- /* UART2 */
- PB28_PF_UART2_CTS,
- PB29_PF_UART2_RTS,
- PB30_PF_UART2_TXD,
- PB31_PF_UART2_RXD,
- /* I2C */
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
- /* SPI */
- PC13_PF_SPI1_SPI_RDY,
- PC14_PF_SPI1_SCLK,
- PC15_PF_SPI1_SS,
- PC16_PF_SPI1_MISO,
- PC17_PF_SPI1_MOSI,
-};
-
-/*
- * UARTs platform data
- */
-
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
-};
-
-/*
- * Physmap flash
- */
-
-static struct physmap_flash_data mx1ads_flash_data = {
- .width = 4, /* bankwidth in bytes */
-};
-
-static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
-/*
- * I2C
- */
-static struct pcf857x_platform_data pcf857x_data[] = {
- {
- .gpio_base = 4 * 32,
- }, {
- .gpio_base = 4 * 32 + 16,
- }
-};
-
-static struct imxi2c_platform_data mx1ads_i2c_data = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mx1ads_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8575", 0x22),
- .platform_data = &pcf857x_data[0],
- }, {
- I2C_BOARD_INFO("pcf8575", 0x24),
- .platform_data = &pcf857x_data[1],
- },
-};
-
-/*
- * Board init
- */
-static void __init mx1ads_init(void)
-{
- mxc_gpio_setup_multiple_pins(mx1ads_pins,
- ARRAY_SIZE(mx1ads_pins), "mx1ads");
-
- /* UART */
- mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
- mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
-
- /* Physmap flash */
- mxc_register_device(&flash_device, &mx1ads_flash_data);
-
- /* I2C */
- i2c_register_board_info(0, mx1ads_i2c_devices,
- ARRAY_SIZE(mx1ads_i2c_devices));
-
- mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-}
-
-static void __init mx1ads_timer_init(void)
-{
- mx1_clocks_init(32000);
-}
-
-struct sys_timer mx1ads_timer = {
- .init = mx1ads_timer_init,
-};
-
-MACHINE_START(MX1ADS, "Freescale MX1ADS")
- /* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx1_map_io,
- .init_irq = mx1_init_irq,
- .timer = &mx1ads_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
-
-MACHINE_START(MXLADS, "Freescale MXLADS")
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx1_map_io,
- .init_irq = mx1_init_irq,
- .timer = &mx1ads_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-mx1/scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-
-#include "devices.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
- .width = 2,
-};
-
-static struct platform_device scb_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &scb_flash_data,
- },
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
- {
- .name = "address area",
- .start = IMX_CS5_PHYS,
- .end = IMX_CS5_PHYS + 1,
- .flags = IORESOURCE_MEM, /* address access */
- }, {
- .name = "data area",
- .start = IMX_CS5_PHYS + 4,
- .end = IMX_CS5_PHYS + 5,
- .flags = IORESOURCE_MEM, /* data access */
- }, {
- .start = IRQ_GPIOC(3),
- .end = IRQ_GPIOC(3),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device dm9000x_device = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm9000x_resources),
- .resource = dm9000x_resources,
- .dev = {
- .platform_data = &dm9000_platdata,
- }
-};
-
-static int mxc_uart1_pins[] = {
- PC9_PF_UART1_CTS,
- PC10_PF_UART1_RTS,
- PC11_PF_UART1_TXD,
- PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static struct imxuart_platform_data uart_pdata = {
- .init = uart1_mxc_init,
- .exit = uart1_mxc_exit,
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
- &scb_flash_device,
- &dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
- mxc_register_device(&imx_uart1_device, &uart_pdata);
-
- printk(KERN_INFO"Scb9328: Adding devices\n");
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
- mx1_clocks_init(32000);
-}
-
-static struct sys_timer scb9328_timer = {
- .init = scb9328_timer_init,
-};
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
- /* Sascha Hauer */
- .phys_io = 0x00200000,
- .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
- .boot_params = 0x08000100,
- .map_io = mx1_map_io,
- .init_irq = mx1_init_irq,
- .timer = &scb9328_timer,
- .init_machine = scb9328_init,
-MACHINE_END
endchoice
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
depends on MACH_MX27
help
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
- depends on MACH_EUKREA_CPUIMX27
+ depends on MACH_CPUIMX27
help
This adds support for the internal SDHC2 used on CPUIMX27 used
for wifi or eMMC.
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX27
+ depends on MACH_CPUIMX27
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
-config MACH_MX27LITE
+config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
depends on MACH_MX27
help
# Object file lists.
obj-y := generic.o devices.o serial.o
+CFLAGS_generic.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_serial.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX21) += clock_imx21.o
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
#include <linux/module.h>
#include <mach/clock.h>
+#include <mach/hardware.h>
#include <mach/common.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET 29
+#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET 26
+#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET 24
+#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES (1 << 22)
+#define CCM_CSCR_MPLLRES (1 << 21)
+#define CCM_CSCR_SSI2_OFFSET 20
+#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET 19
+#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET 18
+#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP (1 << 17)
+#define CCM_CSCR_MCU (1 << 16)
+#define CCM_CSCR_BCLK_OFFSET 10
+#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET 9
+#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV (1 << 4)
+#define CCM_CSCR_OSC26M (1 << 3)
+#define CCM_CSCR_FPM (1 << 2)
+#define CCM_CSCR_SPEN (1 << 1)
+#define CCM_CSCR_MPEN 1
+
+#define CCM_MPCTL0_CPLM (1 << 31)
+#define CCM_MPCTL0_PD_OFFSET 26
+#define CCM_MPCTL0_PD_MASK (0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET 16
+#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET 10
+#define CCM_MPCTL0_MFI_MASK (0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET 0
+#define CCM_MPCTL0_MFN_MASK 0x3ff
+
+#define CCM_MPCTL1_LF (1 << 15)
+#define CCM_MPCTL1_BRMO (1 << 6)
+
+#define CCM_SPCTL0_CPLM (1 << 31)
+#define CCM_SPCTL0_PD_OFFSET 26
+#define CCM_SPCTL0_PD_MASK (0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET 16
+#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET 10
+#define CCM_SPCTL0_MFI_MASK (0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET 0
+#define CCM_SPCTL0_MFN_MASK 0x3ff
+
+#define CCM_SPCTL1_LF (1 << 15)
+#define CCM_SPCTL1_BRMO (1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET 16
+#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET 8
+#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET 0
+#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET 12
+#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET 5
+#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET 0
+#define CCM_PCDR0_FIRIDIV_MASK 0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET 24
+#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET 16
+#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET 8
+#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET 0
+#define CCM_PCDR1_PERDIV1_MASK 0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET 31
+#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET 30
+#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET 28
+#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET 27
+#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET 26
+#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
+#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
+#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET 23
+#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET 22
+#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET 21
+#define CCM_PCCR_SLCDC_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET 20
+#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET 19
+#define CCM_PCCR_NFC_REG CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET 18
+#define CCM_PCCR_LCDC_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET 17
+#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET 16
+#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET 15
+#define CCM_PCCR_EMMA_REG CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET 14
+#define CCM_PCCR_USBOTG_REG CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET 13
+#define CCM_PCCR_DMA_REG CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET 12
+#define CCM_PCCR_I2C1_REG CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET 11
+#define CCM_PCCR_GPIO_REG CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET 10
+#define CCM_PCCR_SDHC2_REG CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET 9
+#define CCM_PCCR_SDHC1_REG CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET 8
+#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET 7
+#define CCM_PCCR_SSI2_REG CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET 6
+#define CCM_PCCR_SSI1_REG CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET 5
+#define CCM_PCCR_CSPI2_REG CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET 4
+#define CCM_PCCR_CSPI1_REG CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET 3
+#define CCM_PCCR_UART4_REG CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET 2
+#define CCM_PCCR_UART3_REG CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET 1
+#define CCM_PCCR_UART2_REG CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET 0
+#define CCM_PCCR_UART1_REG CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET 31
+#define CCM_PCCR_OWIRE_REG CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET 30
+#define CCM_PCCR_KPP_REG CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET 29
+#define CCM_PCCR_RTC_REG CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET 28
+#define CCM_PCCR_PWM_REG CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET 27
+#define CCM_PCCR_GPT3_REG CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET 26
+#define CCM_PCCR_GPT2_REG CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET 25
+#define CCM_PCCR_GPT1_REG CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET 24
+#define CCM_PCCR_WDT_REG CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET 23
+#define CCM_PCCR_CSPI3_REG CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR (1 << 15)
+
+#define CCM_CCSR_CLKMODE1 (1 << 9)
+#define CCM_CCSR_CLKMODE0 (1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK 0x1f
+
+#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
+#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
static int _clk_enable(struct clk *clk)
{
clk_enable(&uart_clk[0]);
#endif
- mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+ mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+ MX21_INT_GPT1);
return 0;
}
#include <mach/common.h>
#include <mach/hardware.h>
+#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
/* Register offsets */
-#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
#define CCM_CSCR_UPDATE_DIS (1 << 31)
#define CCM_CSCR_SSI2 (1 << 23)
clk_enable(&uart1_clk);
#endif
- mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+ mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+ MX27_INT_GPT1);
return 0;
}
* the silicon revision very early we read it here to
* avoid any further hooks
*/
- val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+ val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ + SYS_CHIP_ID));
cpu_silicon_rev = (int)(val >> 28);
cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_PRESC_OFFSET 29
-#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET 26
-#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET 24
-#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES (1 << 22)
-#define CCM_CSCR_MPLLRES (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET 20
-#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET 19
-#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET 18
-#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET 10
-#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET 9
-#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN 1
-
-
-
-#define CCM_MPCTL0_CPLM (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET 26
-#define CCM_MPCTL0_PD_MASK (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET 16
-#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET 10
-#define CCM_MPCTL0_MFI_MASK (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET 0
-#define CCM_MPCTL0_MFN_MASK 0x3ff
-
-#define CCM_MPCTL1_LF (1 << 15)
-#define CCM_MPCTL1_BRMO (1 << 6)
-
-#define CCM_SPCTL0_CPLM (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET 26
-#define CCM_SPCTL0_PD_MASK (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET 16
-#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET 10
-#define CCM_SPCTL0_MFI_MASK (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET 0
-#define CCM_SPCTL0_MFN_MASK 0x3ff
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET 16
-#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET 8
-#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET 0
-#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET 12
-#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET 5
-#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET 0
-#define CCM_PCDR0_FIRIDIV_MASK 0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET 24
-#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET 16
-#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET 8
-#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET 0
-#define CCM_PCDR1_PERDIV1_MASK 0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET 31
-#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET 30
-#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET 28
-#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET 27
-#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET 26
-#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
-#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
-#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET 23
-#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET 22
-#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET 21
-#define CCM_PCCR_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET 20
-#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET 19
-#define CCM_PCCR_NFC_REG CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET 18
-#define CCM_PCCR_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET 17
-#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET 16
-#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET 15
-#define CCM_PCCR_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET 14
-#define CCM_PCCR_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET 13
-#define CCM_PCCR_DMA_REG CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET 12
-#define CCM_PCCR_I2C1_REG CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET 11
-#define CCM_PCCR_GPIO_REG CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET 10
-#define CCM_PCCR_SDHC2_REG CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET 9
-#define CCM_PCCR_SDHC1_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET 8
-#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET 7
-#define CCM_PCCR_SSI2_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET 6
-#define CCM_PCCR_SSI1_REG CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET 5
-#define CCM_PCCR_CSPI2_REG CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET 4
-#define CCM_PCCR_CSPI1_REG CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET 3
-#define CCM_PCCR_UART4_REG CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET 2
-#define CCM_PCCR_UART3_REG CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET 1
-#define CCM_PCCR_UART2_REG CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET 0
-#define CCM_PCCR_UART1_REG CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET 31
-#define CCM_PCCR_OWIRE_REG CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET 30
-#define CCM_PCCR_KPP_REG CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET 29
-#define CCM_PCCR_RTC_REG CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET 28
-#define CCM_PCCR_PWM_REG CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET 27
-#define CCM_PCCR_GPT3_REG CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET 26
-#define CCM_PCCR_GPT2_REG CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET 25
-#define CCM_PCCR_GPT1_REG CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET 24
-#define CCM_PCCR_WDT_REG CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET 23
-#define CCM_PCCR_CSPI3_REG CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
-
-
-#define CCM_CCSR_32KSR (1 << 15)
-
-#define CCM_CCSR_CLKMODE1 (1 << 9)
-#define CCM_CCSR_CLKMODE0 (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK 0x1f
-
-#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
-#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-eukrea_cpuimx27.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/iomux.h>
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-
-static int eukrea_cpuimx27_pins[] = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART4 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C1 */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* SDHC2 */
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
- /* Quad UART's IRQ */
- GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
- GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
- GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
- GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
- .width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc3ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &eukrea_cpuimx27_flash_data,
- },
- .num_resources = 1,
- .resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
-};
-
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &eukrea_cpuimx27_nor_mtd_device,
- &mxc_fec_device,
-};
-
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
- .irq = IRQ_GPIOB(23),
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
- .irq = IRQ_GPIOB(22),
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
- .irq = IRQ_GPIOB(27),
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
- .irq = IRQ_GPIOB(30),
- .uartclk = 14745600,
- .regshift = 1,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
- }, {
- }
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-#endif
-
-static void __init eukrea_cpuimx27_init(void)
-{
- mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
- ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-
- mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
-
- i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
- mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
- /* SDHC2 can be used for Wifi */
- mxc_register_device(&mxc_sdhc_device1, NULL);
- /* in which case UART4 is also used for Bluetooth */
- mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
- platform_device_register(&serial_device);
-#endif
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
- eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-static struct sys_timer eukrea_cpuimx27_timer = {
- .init = eukrea_cpuimx27_timer_init,
-};
-
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = eukrea_cpuimx27_init,
- .timer = &eukrea_cpuimx27_timer,
-MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C1 */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* SDHC2 */
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ /* Quad UART's IRQ */
+ GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+ GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+ .width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc3ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &eukrea_cpuimx27_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &eukrea_cpuimx27_nor_mtd_device,
+ &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
+ .irq = IRQ_GPIOB(23),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
+ .irq = IRQ_GPIOB(22),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
+ .irq = IRQ_GPIOB(27),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
+ .irq = IRQ_GPIOB(30),
+ .uartclk = 14745600,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+ }, {
+ }
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+ mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+ ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+ mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+ i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+ ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+ /* SDHC2 can be used for Wifi */
+ mxc_register_device(&mxc_sdhc_device1, NULL);
+ /* in which case UART4 is also used for Bluetooth */
+ mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+ platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+ eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+ .init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = eukrea_cpuimx27_init,
+ .timer = &eukrea_cpuimx27_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+ "imx27lite");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+ .init = mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = mx27lite_init,
+ .timer = &mx27lite_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+ /* CS8900A */
+ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+
+ /* UART3 (IrDA) - only TXD and RXD */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+
+ /* LCDC */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA24_PF_REV, /* Sharp panel dedicated signal */
+ PA25_PF_CLS, /* Sharp panel dedicated signal */
+ PA26_PF_PS, /* Sharp panel dedicated signal */
+ PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+
+ /* MMC/SDHC */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+
+ /* NFC */
+ PF0_PF_NRFB,
+ PF1_PF_NFCE,
+ PF2_PF_NFWP,
+ PF3_PF_NFCLE,
+ PF4_PF_NFALE,
+ PF5_PF_NFRE,
+ PF6_PF_NFWE,
+ PF7_PF_NFIO0,
+ PF8_PF_NFIO1,
+ PF9_PF_NFIO2,
+ PF10_PF_NFIO3,
+ PF11_PF_NFIO4,
+ PF12_PF_NFIO5,
+ PF13_PF_NFIO6,
+ PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+ .width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+ .start = MX21_CS0_BASE_ADDR,
+ .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx21ads_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp |= MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+ return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp &= ~MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_videomode mx21ads_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ },
+ .pcr = 0xfb108bc7,
+ .bpp = 16,
+ },
+};
+
+static struct imx_fb_platform_data mx21ads_fb_data = {
+ .mode = mx21ads_modes,
+ .num_modes = ARRAY_SIZE(mx21ads_modes),
+
+ .pwmr = 0x00a903ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
+
+ .init = mx21ads_fb_init,
+ .exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+ return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOD(25), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
+ if (ret)
+ goto out;
+ return 0;
+out:
+ return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+ .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+ .get_ro = mx21ads_sdhc_get_ro,
+ .init = mx21ads_sdhc_init,
+ .exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+ /*
+ * Memory-mapped I/O on MX21ADS Base board:
+ * - CS8900A Ethernet controller
+ * - ST16C2552CJ UART
+ * - CPU and Base board version
+ * - Base board I/O register
+ */
+ {
+ .virtual = MX21ADS_MMIO_BASE_ADDR,
+ .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
+ .length = MX21ADS_MMIO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init mx21ads_map_io(void)
+{
+ mx21_map_io();
+ iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+ "mx21ads");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata);
+ mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+ mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+ mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+ .init = mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX21_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx21ads_map_io,
+ .init_irq = mx21_init_irq,
+ .init_machine = mx21ads_board_init,
+ .timer = &mx21ads_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+ "mx27pdk");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+ .init = mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = mx27pdk_init,
+ .timer = &mx27pdk_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mx27ads_pins[] = {
+ /* UART0 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART1 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART2 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART3 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* UART4 */
+ PB18_AF_UART5_TXD,
+ PB19_AF_UART5_RXD,
+ PB20_AF_UART5_CTS,
+ PB21_AF_UART5_RTS,
+ /* UART5 */
+ PB10_AF_UART6_TXD,
+ PB12_AF_UART6_CTS,
+ PB11_AF_UART6_RXD,
+ PB13_AF_UART6_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* FB */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* OWIRE */
+ PE16_AF_OWIRE,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* SDHC2*/
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+ .width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc0000000 + 0x02000000 - 1,
+ .flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx27ads_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mx27ads_flash_resource,
+};
+
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info mx27ads_i2c_devices[] = {
+};
+
+void lcd_power(int on)
+{
+ if (on)
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+ else
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+}
+
+static struct imx_fb_videomode mx27ads_modes[] = {
+ {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679, /* in ps (5.3MHz) */
+ .hsync_len = 1,
+ .left_margin = 9,
+ .right_margin = 16,
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ },
+ .bpp = 16,
+ .pcr = 0xFB008BC0,
+ },
+};
+
+static struct imx_fb_platform_data mx27ads_fb_data = {
+ .mode = mx27ads_modes,
+ .num_modes = ARRAY_SIZE(mx27ads_modes),
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+
+ .lcd_power = lcd_power,
+};
+
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc1-card-detect", data);
+}
+
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc2-card-detect", data);
+}
+
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOE(21), data);
+}
+
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOB(7), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx27ads_sdhc1_init,
+ .exit = mx27ads_sdhc1_exit,
+};
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .init = mx27ads_sdhc2_init,
+ .exit = mx27ads_sdhc2_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mx27ads_nor_mtd_device,
+ &mxc_fec_device,
+ &mxc_w1_master_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static void __init mx27ads_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+ "mx27ads");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+ mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+ mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+ mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, mx27ads_i2c_devices,
+ ARRAY_SIZE(mx27ads_i2c_devices));
+ mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+ mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+ unsigned long fref = 26000000;
+
+ if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+ fref = 27000000;
+
+ mx27_clocks_init(fref);
+}
+
+static struct sys_timer mx27ads_timer = {
+ .init = mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+ {
+ .virtual = PBC_BASE_ADDRESS,
+ .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init mx27ads_map_io(void)
+{
+ mx27_map_io();
+ iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27ads_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = mx27ads_board_init,
+ .timer = &mx27ads_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+ /* UART0 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART1 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART2 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C1 */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* FB */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA25_PF_CLS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* OWIRE */
+ PE16_AF_OWIRE,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ PF8_AF_ATA_IORDY,
+ /* SDHC2*/
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c_data = {
+ .bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+ unsigned gpio_base, unsigned ngpio,
+ void *context)
+{
+ static int mxt_td60_gpio_value[] = {
+ -1, -1, -1, -1, -1, -1, -1, 1
+ };
+ int n;
+
+ for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+ gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+ if (mxt_td60_gpio_value[n] < 0)
+ gpio_direction_input(gpio_base + n);
+ else
+ gpio_direction_output(gpio_base + n,
+ mxt_td60_gpio_value[n]);
+ gpio_export(gpio_base + n, 0);
+ }
+
+ return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+ .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */
+ .invert = 0, /* Do not invert */
+ .setup = mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pca9557", 0x18),
+ .platform_data = &mxt_td60_pca9557_pdata,
+ },
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+ {
+ .mode = {
+ .name = "Chimei LW700AT9003",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30303,
+ .hsync_len = 64,
+ .left_margin = 0x67,
+ .right_margin = 0x68,
+ .vsync_len = 16,
+ .upper_margin = 0x0f,
+ .lower_margin = 0x0f,
+ },
+ .bpp = 16,
+ .pcr = 0xFA208B83,
+ },
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+ .mode = mxt_td60_modes,
+ .num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+ "sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mxt_td60_sdhc1_init,
+ .exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static void __init mxt_td60_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+ "MXT_TD60");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+
+ i2c_register_board_info(0, mxt_td60_i2c_devices,
+ ARRAY_SIZE(mxt_td60_i2c_devices));
+
+ i2c_register_board_info(1, mxt_td60_i2c2_devices,
+ ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+ mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+ mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+ .init = mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+ /* maintainer: Maxtrack Industrial */
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = mxt_td60_board_init,
+ .timer = &mxt_td60_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* SDHC */
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* onboard I2C */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* external I2C */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_w1_master_device,
+ &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563"
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4a),
+ .type = "lm75"
+ }
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+ .name = "at25320an",
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+ {
+ .modalias = "at25",
+ .max_speed_hz = 30000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = &at25320,
+ },
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+ .chipselect = pca100_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOC(29), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "imx-mmc-detect", data);
+ if (ret)
+ printk(KERN_ERR
+ "pca100: Failed to reuest irq for sd/mmc detection\n");
+
+ return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .init = pca100_sdhc2_init,
+ .exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+ int ret;
+
+ ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+ ARRAY_SIZE(pca100_pins), "PCA100");
+ if (ret)
+ printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+ mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, pca100_i2c_devices,
+ ARRAY_SIZE(pca100_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+ /* GPIO0_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+ /* GPIO1_IRQ */
+ mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+ /* GPIO2_IRQ */
+ mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+ spi_register_board_info(pca100_spi_board_info,
+ ARRAY_SIZE(pca100_spi_board_info));
+ mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+ .init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = pca100_init,
+ .timer = &pca100_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+static int pcm038_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART2 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART3 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* SSI4 */
+ PC16_PF_SSI4_FS,
+ PC17_PF_SSI4_RXD,
+ PC18_PF_SSI4_TXD,
+ PC19_PF_SSI4_CLK,
+};
+
+/*
+ * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
+ * 16 bit width
+ */
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+ .bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+ .start = MX27_CS1_BASE_ADDR,
+ .end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_sram_mtd_device = {
+ .name = "mtd-ram",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm038_sram_data,
+ },
+ .num_resources = 1,
+ .resource = &pcm038_sram_resource,
+};
+
+/*
+ * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
+ * 16 bit width
+ */
+static struct physmap_flash_data pcm038_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm038_flash_resource = {
+ .start = 0xc0000000,
+ .end = 0xc1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm038_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &pcm038_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static struct mxc_nand_platform_data pcm038_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &pcm038_nor_mtd_device,
+ &mxc_w1_master_device,
+ &mxc_fec_device,
+ &pcm038_sram_mtd_device,
+};
+
+/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
+ * setup other stuffs to access the sram. */
+static void __init pcm038_init_sram(void)
+{
+ mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+}
+
+static struct imxi2c_platform_data pcm038_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm038_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4a),
+ }
+};
+
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+ .chipselect = pcm038_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+ {
+ .dev = &mxc_sdhc_device1.dev,
+ .supply = "sdhc_vcc",
+ },
+};
+
+static struct regulator_init_data sdhc1_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+ .consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+ {
+ .dev = NULL,
+ .supply = "imx_cam_vcc",
+ },
+};
+
+static struct regulator_init_data cam_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+ .consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+ {
+ .id = MC13783_REGU_VCAM,
+ .init_data = &cam_data,
+ }, {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &sdhc1_data,
+ },
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+ .regulators = pcm038_regulators,
+ .num_regulators = ARRAY_SIZE(pcm038_regulators),
+ .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+ MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .irq = IRQ_GPIOB(23),
+ .max_speed_hz = 300000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &pcm038_pmic,
+ .mode = SPI_CS_HIGH,
+ }
+};
+
+static void __init pcm038_init(void)
+{
+ mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+ "PCM038");
+
+ pcm038_init_sram();
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+
+ mxc_gpio_mode(PE16_AF_OWIRE);
+ mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, pcm038_i2c_devices,
+ ARRAY_SIZE(pcm038_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+
+ /* PE18 for user-LED D40 */
+ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+ /* MC13783 IRQ */
+ mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+ mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+ spi_register_board_info(pcm038_spi_board_info,
+ ARRAY_SIZE(pcm038_spi_board_info));
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#ifdef CONFIG_MACH_PCM970_BASEBOARD
+ pcm970_baseboard_init();
+#endif
+}
+
+static void __init pcm038_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pcm038_timer = {
+ .init = pcm038_timer_init,
+};
+
+MACHINE_START(PCM038, "phyCORE-i.MX27")
+ .phys_io = MX27_AIPI_BASE_ADDR,
+ .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = pcm038_init,
+ .timer = &pcm038_timer,
+MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/imx-uart.h>
-#include <mach/imxfb.h>
-#include <mach/iomux.h>
-#include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
-
-#include "devices.h"
-
-static unsigned int mx21ads_pins[] = {
-
- /* CS8900A */
- (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
-
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
-
- /* UART3 (IrDA) - only TXD and RXD */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
-
- /* UART4 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
-
- /* LCDC */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA24_PF_REV, /* Sharp panel dedicated signal */
- PA25_PF_CLS, /* Sharp panel dedicated signal */
- PA26_PF_PS, /* Sharp panel dedicated signal */
- PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
-
- /* MMC/SDHC */
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
-
- /* NFC */
- PF0_PF_NRFB,
- PF1_PF_NFCE,
- PF2_PF_NFWP,
- PF3_PF_NFCLE,
- PF4_PF_NFALE,
- PF5_PF_NFRE,
- PF6_PF_NFWE,
- PF7_PF_NFIO0,
- PF8_PF_NFIO1,
- PF9_PF_NFIO2,
- PF10_PF_NFIO3,
- PF11_PF_NFIO4,
- PF12_PF_NFIO5,
- PF13_PF_NFIO6,
- PF14_PF_NFIO7,
-};
-
-/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
-static struct physmap_flash_data mx21ads_flash_data = {
- .width = 4,
-};
-
-static struct resource mx21ads_flash_resource = {
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + 0x02000000 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx21ads_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx21ads_flash_data,
- },
- .num_resources = 1,
- .resource = &mx21ads_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct imxuart_platform_data uart_norts_pdata = {
-};
-
-
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
- u16 tmp;
-
- tmp = __raw_readw(MX21ADS_IO_REG);
- tmp |= MX21ADS_IO_LCDON;
- __raw_writew(tmp, MX21ADS_IO_REG);
- return 0;
-}
-
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
- u16 tmp;
-
- tmp = __raw_readw(MX21ADS_IO_REG);
- tmp &= ~MX21ADS_IO_LCDON;
- __raw_writew(tmp, MX21ADS_IO_REG);
-}
-
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DB02
- */
-static struct imx_fb_videomode mx21ads_modes[] = {
- {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 2,
- .left_margin = 6,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 8,
- .lower_margin = 10,
- },
- .pcr = 0xfb108bc7,
- .bpp = 16,
- },
-};
-
-static struct imx_fb_platform_data mx21ads_fb_data = {
- .mode = mx21ads_modes,
- .num_modes = ARRAY_SIZE(mx21ads_modes),
-
- .pwmr = 0x00a903ff,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020008,
-
- .init = mx21ads_fb_init,
- .exit = mx21ads_fb_exit,
-};
-
-static int mx21ads_sdhc_get_ro(struct device *dev)
-{
- return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
-}
-
-static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = request_irq(IRQ_GPIOD(25), detect_irq,
- IRQF_TRIGGER_FALLING, "mmc-detect", data);
- if (ret)
- goto out;
- return 0;
-out:
- return ret;
-}
-
-static void mx21ads_sdhc_exit(struct device *dev, void *data)
-{
- free_irq(IRQ_GPIOD(25), data);
-}
-
-static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
- .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
- .get_ro = mx21ads_sdhc_get_ro,
- .init = mx21ads_sdhc_init,
- .exit = mx21ads_sdhc_exit,
-};
-
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct map_desc mx21ads_io_desc[] __initdata = {
- /*
- * Memory-mapped I/O on MX21ADS Base board:
- * - CS8900A Ethernet controller
- * - ST16C2552CJ UART
- * - CPU and Base board version
- * - Base board I/O register
- */
- {
- .virtual = MX21ADS_MMIO_BASE_ADDR,
- .pfn = __phys_to_pfn(CS1_BASE_ADDR),
- .length = MX21ADS_MMIO_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-static void __init mx21ads_map_io(void)
-{
- mx21_map_io();
- iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
-static struct platform_device *platform_devices[] __initdata = {
- &mx21ads_nor_mtd_device,
-};
-
-static void __init mx21ads_board_init(void)
-{
- mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
- "mx21ads");
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
- mxc_register_device(&mxc_uart_device3, &uart_pdata);
- mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
- mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
- mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx21ads_timer_init(void)
-{
- mx21_clocks_init(32768, 26000000);
-}
-
-static struct sys_timer mx21ads_timer = {
- .init = mx21ads_timer_init,
-};
-
-MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
- /* maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx21ads_map_io,
- .init_irq = mx21_init_irq,
- .init_machine = mx21ads_board_init,
- .timer = &mx21ads_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/gpio.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/board-mx27ads.h>
-#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static unsigned int mx27ads_pins[] = {
- /* UART0 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART1 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART2 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* UART3 */
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD,
- /* UART4 */
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS,
- /* UART5 */
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C2 */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* FB */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA24_PF_REV,
- PA25_PF_CLS,
- PA26_PF_PS,
- PA27_PF_SPL_SPR,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- /* OWIRE */
- PE16_AF_OWIRE,
- /* SDHC1*/
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- /* SDHC2*/
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
-};
-
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/* ADS's NOR flash */
-static struct physmap_flash_data mx27ads_flash_data = {
- .width = 2,
-};
-
-static struct resource mx27ads_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc0000000 + 0x02000000 - 1,
- .flags = IORESOURCE_MEM,
-
-};
-
-static struct platform_device mx27ads_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx27ads_flash_data,
- },
- .num_resources = 1,
- .resource = &mx27ads_flash_resource,
-};
-
-static struct imxi2c_platform_data mx27ads_i2c_data = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mx27ads_i2c_devices[] = {
-};
-
-void lcd_power(int on)
-{
- if (on)
- __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
- else
- __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
-}
-
-static struct imx_fb_videomode mx27ads_modes[] = {
- {
- .mode = {
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 188679, /* in ps (5.3MHz) */
- .hsync_len = 1,
- .left_margin = 9,
- .right_margin = 16,
- .vsync_len = 1,
- .upper_margin = 7,
- .lower_margin = 9,
- },
- .bpp = 16,
- .pcr = 0xFB008BC0,
- },
-};
-
-static struct imx_fb_platform_data mx27ads_fb_data = {
- .mode = mx27ads_modes,
- .num_modes = ARRAY_SIZE(mx27ads_modes),
-
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-
- .lcd_power = lcd_power,
-};
-
-static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc1-card-detect", data);
-}
-
-static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
- "sdhc2-card-detect", data);
-}
-
-static void mx27ads_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(IRQ_GPIOE(21), data);
-}
-
-static void mx27ads_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(IRQ_GPIOB(7), data);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
- .init = mx27ads_sdhc1_init,
- .exit = mx27ads_sdhc1_exit,
-};
-
-static struct imxmmc_platform_data sdhc2_pdata = {
- .init = mx27ads_sdhc2_init,
- .exit = mx27ads_sdhc2_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mx27ads_nor_mtd_device,
- &mxc_fec_device,
- &mxc_w1_master_device,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
-};
-
-static void __init mx27ads_board_init(void)
-{
- mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
- "mx27ads");
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
- mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
- mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
- mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, mx27ads_i2c_devices,
- ARRAY_SIZE(mx27ads_i2c_devices));
- mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
- mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
- mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
- mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27ads_timer_init(void)
-{
- unsigned long fref = 26000000;
-
- if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
- fref = 27000000;
-
- mx27_clocks_init(fref);
-}
-
-static struct sys_timer mx27ads_timer = {
- .init = mx27ads_timer_init,
-};
-
-static struct map_desc mx27ads_io_desc[] __initdata = {
- {
- .virtual = PBC_BASE_ADDRESS,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = SZ_1M,
- .type = MT_DEVICE,
- },
-};
-
-static void __init mx27ads_map_io(void)
-{
- mx27_map_io();
- iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
-}
-
-MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
- /* maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27ads_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = mx27ads_board_init,
- .timer = &mx27ads_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/board-mx27lite.h>
-
-#include "devices.h"
-
-static unsigned int mx27lite_pins[] = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_fec_device,
-};
-
-static void __init mx27lite_init(void)
-{
- mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
- "imx27lite");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27lite_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27lite_timer = {
- .init = mx27lite_timer_init,
-};
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = mx27lite_init,
- .timer = &mx27lite_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/board-mx27pdk.h>
-
-#include "devices.h"
-
-static unsigned int mx27pdk_pins[] = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_fec_device,
-};
-
-static void __init mx27pdk_init(void)
-{
- mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
- "mx27pdk");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27pdk_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27pdk_timer = {
- .init = mx27pdk_timer_init,
-};
-
-MACHINE_START(MX27_3DS, "Freescale MX27PDK")
- /* maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = mx27pdk_init,
- .timer = &mx27pdk_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <linux/gpio.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux.h>
-#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static unsigned int mxt_td60_pins[] __initdata = {
- /* UART0 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART1 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART2 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C1 */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* I2C2 */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* FB */
- PA5_PF_LSCLK,
- PA6_PF_LD0,
- PA7_PF_LD1,
- PA8_PF_LD2,
- PA9_PF_LD3,
- PA10_PF_LD4,
- PA11_PF_LD5,
- PA12_PF_LD6,
- PA13_PF_LD7,
- PA14_PF_LD8,
- PA15_PF_LD9,
- PA16_PF_LD10,
- PA17_PF_LD11,
- PA18_PF_LD12,
- PA19_PF_LD13,
- PA20_PF_LD14,
- PA21_PF_LD15,
- PA22_PF_LD16,
- PA23_PF_LD17,
- PA25_PF_CLS,
- PA27_PF_SPL_SPR,
- PA28_PF_HSYNC,
- PA29_PF_VSYNC,
- PA30_PF_CONTRAST,
- PA31_PF_OE_ACD,
- /* OWIRE */
- PE16_AF_OWIRE,
- /* SDHC1*/
- PE18_PF_SD1_D0,
- PE19_PF_SD1_D1,
- PE20_PF_SD1_D2,
- PE21_PF_SD1_D3,
- PE22_PF_SD1_CMD,
- PE23_PF_SD1_CLK,
- PF8_AF_ATA_IORDY,
- /* SDHC2*/
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
-};
-
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
- .bitrate = 100000,
-};
-
-/* PCA9557 */
-static int mxt_td60_pca9557_setup(struct i2c_client *client,
- unsigned gpio_base, unsigned ngpio,
- void *context)
-{
- static int mxt_td60_gpio_value[] = {
- -1, -1, -1, -1, -1, -1, -1, 1
- };
- int n;
-
- for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
- gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
- if (mxt_td60_gpio_value[n] < 0)
- gpio_direction_input(gpio_base + n);
- else
- gpio_direction_output(gpio_base + n,
- mxt_td60_gpio_value[n]);
- gpio_export(gpio_base + n, 0);
- }
-
- return 0;
-}
-
-static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
- .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */
- .invert = 0, /* Do not invert */
- .setup = mxt_td60_pca9557_setup,
-};
-
-static struct i2c_board_info mxt_td60_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pca9557", 0x18),
- .platform_data = &mxt_td60_pca9557_pdata,
- },
-};
-
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info mxt_td60_i2c2_devices[] = {
-};
-
-static struct imx_fb_videomode mxt_td60_modes[] = {
- {
- .mode = {
- .name = "Chimei LW700AT9003",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 30303,
- .hsync_len = 64,
- .left_margin = 0x67,
- .right_margin = 0x68,
- .vsync_len = 16,
- .upper_margin = 0x0f,
- .lower_margin = 0x0f,
- },
- .bpp = 16,
- .pcr = 0xFA208B83,
- },
-};
-
-static struct imx_fb_platform_data mxt_td60_fb_data = {
- .mode = mxt_td60_modes,
- .num_modes = ARRAY_SIZE(mxt_td60_modes),
-
- /*
- * - HSYNC active high
- * - VSYNC active high
- * - clk notenabled while idle
- * - clock inverted
- * - data not inverted
- * - data enable low active
- * - enable sharp mode
- */
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
- "sdhc1-card-detect", data);
-}
-
-static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(IRQ_GPIOF(8), data);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
- .init = mxt_td60_sdhc1_init,
- .exit = mxt_td60_sdhc1_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_fec_device,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
-};
-
-static void __init mxt_td60_board_init(void)
-{
- mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
- "MXT_TD60");
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
-
- i2c_register_board_info(0, mxt_td60_i2c_devices,
- ARRAY_SIZE(mxt_td60_i2c_devices));
-
- i2c_register_board_info(1, mxt_td60_i2c2_devices,
- ARRAY_SIZE(mxt_td60_i2c2_devices));
-
- mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
- mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
- mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
- mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mxt_td60_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mxt_td60_timer = {
- .init = mxt_td60_timer_init,
-};
-
-MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
- /* maintainer: Maxtrack Industrial */
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = mxt_td60_board_init,
- .timer = &mxt_td60_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux.h>
-#include <mach/i2c.h>
-#include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-#include <mach/irqs.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static int pca100_pins[] = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* SDHC */
- PB4_PF_SD2_D0,
- PB5_PF_SD2_D1,
- PB6_PF_SD2_D2,
- PB7_PF_SD2_D3,
- PB8_PF_SD2_CMD,
- PB9_PF_SD2_CLK,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* onboard I2C */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* external I2C */
- PD17_PF_I2C_DATA,
- PD18_PF_I2C_CLK,
- /* SPI1 */
- PD25_PF_CSPI1_RDY,
- PD29_PF_CSPI1_SCLK,
- PD30_PF_CSPI1_MISO,
- PD31_PF_CSPI1_MOSI,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct mxc_nand_platform_data pca100_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &mxc_w1_master_device,
- &mxc_fec_device,
-};
-
-static struct imxi2c_platform_data pca100_i2c_1_data = {
- .bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
- .byte_len = 4096,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
- {
- I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
- .platform_data = &board_eeprom,
- }, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
- }, {
- I2C_BOARD_INFO("lm75", 0x4a),
- .type = "lm75"
- }
-};
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-static struct spi_eeprom at25320 = {
- .name = "at25320an",
- .byte_len = 4096,
- .page_size = 32,
- .flags = EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
- {
- .modalias = "at25",
- .max_speed_hz = 30000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = &at25320,
- },
-};
-
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
-
-static struct spi_imx_master pca100_spi_0_data = {
- .chipselect = pca100_spi_cs,
- .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
-};
-#endif
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = request_irq(IRQ_GPIOC(29), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "imx-mmc-detect", data);
- if (ret)
- printk(KERN_ERR
- "pca100: Failed to reuest irq for sd/mmc detection\n");
-
- return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
- free_irq(IRQ_GPIOC(29), data);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
- .init = pca100_sdhc2_init,
- .exit = pca100_sdhc2_exit,
-};
-
-static void __init pca100_init(void)
-{
- int ret;
-
- ret = mxc_gpio_setup_multiple_pins(pca100_pins,
- ARRAY_SIZE(pca100_pins), "PCA100");
- if (ret)
- printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
- mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
-
- mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, pca100_i2c_devices,
- ARRAY_SIZE(pca100_i2c_devices));
-
- mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
- mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
- /* GPIO0_IRQ */
- mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
- /* GPIO1_IRQ */
- mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
- /* GPIO2_IRQ */
- mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
- spi_register_board_info(pca100_spi_board_info,
- ARRAY_SIZE(pca100_spi_board_info));
- mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
-#endif
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init pca100_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pca100_timer = {
- .init = pca100_timer_init,
-};
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = pca100_init,
- .timer = &pca100_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-pcm038.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/iomux.h>
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
-
-#include "devices.h"
-
-static int pcm038_pins[] = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* UART2 */
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD,
- /* UART3 */
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
- /* I2C2 */
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL,
- /* SPI1 */
- PD25_PF_CSPI1_RDY,
- PD29_PF_CSPI1_SCLK,
- PD30_PF_CSPI1_MISO,
- PD31_PF_CSPI1_MOSI,
- /* SSI1 */
- PC20_PF_SSI1_FS,
- PC21_PF_SSI1_RXD,
- PC22_PF_SSI1_TXD,
- PC23_PF_SSI1_CLK,
- /* SSI4 */
- PC16_PF_SSI4_FS,
- PC17_PF_SSI4_RXD,
- PC18_PF_SSI4_TXD,
- PC19_PF_SSI4_CLK,
-};
-
-/*
- * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
- * 16 bit width
- */
-
-static struct platdata_mtd_ram pcm038_sram_data = {
- .bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
- .start = CS1_BASE_ADDR,
- .end = CS1_BASE_ADDR + 512 * 1024 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_sram_mtd_device = {
- .name = "mtd-ram",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_sram_data,
- },
- .num_resources = 1,
- .resource = &pcm038_sram_resource,
-};
-
-/*
- * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
- * 16 bit width
- */
-static struct physmap_flash_data pcm038_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm038_flash_resource = {
- .start = 0xc0000000,
- .end = 0xc1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_flash_data,
- },
- .num_resources = 1,
- .resource = &pcm038_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
-};
-
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &pcm038_nor_mtd_device,
- &mxc_w1_master_device,
- &mxc_fec_device,
- &pcm038_sram_mtd_device,
-};
-
-/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
- * setup other stuffs to access the sram. */
-static void __init pcm038_init_sram(void)
-{
- __raw_writel(0x0000d843, CSCR_U(1));
- __raw_writel(0x22252521, CSCR_L(1));
- __raw_writel(0x22220a00, CSCR_A(1));
-}
-
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
- .bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
- .byte_len = 4096,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm038_i2c_devices[] = {
- {
- I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
- .platform_data = &board_eeprom,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }, {
- I2C_BOARD_INFO("lm75", 0x4a),
- }
-};
-
-static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-
-static struct spi_imx_master pcm038_spi_0_data = {
- .chipselect = pcm038_spi_cs,
- .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
-};
-
-static struct regulator_consumer_supply sdhc1_consumers[] = {
- {
- .dev = &mxc_sdhc_device1.dev,
- .supply = "sdhc_vcc",
- },
-};
-
-static struct regulator_init_data sdhc1_data = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3400000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 0,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
- .consumer_supplies = sdhc1_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
- {
- .dev = NULL,
- .supply = "imx_cam_vcc",
- },
-};
-
-static struct regulator_init_data cam_data = {
- .constraints = {
- .min_uV = 3000000,
- .max_uV = 3400000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 0,
- },
- .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
- .consumer_supplies = cam_consumers,
-};
-
-struct mc13783_regulator_init_data pcm038_regulators[] = {
- {
- .id = MC13783_REGU_VCAM,
- .init_data = &cam_data,
- }, {
- .id = MC13783_REGU_VMMC1,
- .init_data = &sdhc1_data,
- },
-};
-
-static struct mc13783_platform_data pcm038_pmic = {
- .regulators = pcm038_regulators,
- .num_regulators = ARRAY_SIZE(pcm038_regulators),
- .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
- MC13783_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info pcm038_spi_board_info[] __initdata = {
- {
- .modalias = "mc13783",
- .irq = IRQ_GPIOB(23),
- .max_speed_hz = 300000,
- .bus_num = 0,
- .chip_select = 0,
- .platform_data = &pcm038_pmic,
- .mode = SPI_CS_HIGH,
- }
-};
-
-static void __init pcm038_init(void)
-{
- mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
- "PCM038");
-
- pcm038_init_sram();
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-
- mxc_gpio_mode(PE16_AF_OWIRE);
- mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
-
- /* only the i2c master 1 is used on this CPU card */
- i2c_register_board_info(1, pcm038_i2c_devices,
- ARRAY_SIZE(pcm038_i2c_devices));
-
- mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-
- /* PE18 for user-LED D40 */
- mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
-
- mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-
- /* MC13783 IRQ */
- mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-
- mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
- spi_register_board_info(pcm038_spi_board_info,
- ARRAY_SIZE(pcm038_spi_board_info));
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-#ifdef CONFIG_MACH_PCM970_BASEBOARD
- pcm970_baseboard_init();
-#endif
-}
-
-static void __init pcm038_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pcm038_timer = {
- .init = pcm038_timer_init,
-};
-
-MACHINE_START(PCM038, "phyCORE-i.MX27")
- .phys_io = AIPI_BASE_ADDR,
- .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = pcm038_init,
- .timer = &pcm038_timer,
-MACHINE_END
static struct resource pcm970_sja1000_resources[] = {
{
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0x100 - 1,
+ .start = MX27_CS4_BASE_ADDR,
+ .end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIOE(19),
.num_resources = ARRAY_SIZE(mx25_fec_resources),
.resource = mx25_fec_resources,
};
+
+static struct resource mxc_nand_resources[] = {
+ {
+ .start = MX25_NFC_BASE_ADDR,
+ .end = MX25_NFC_BASE_ADDR + 0x1fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MX25_INT_NANDFC,
+ .end = MX25_INT_NANDFC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mxc_nand_device = {
+ .name = "mxc_nand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mxc_nand_resources),
+ .resource = mxc_nand_resources,
+};
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx25_fec_device;
+extern struct platform_device mxc_nand_device;
gpio_set_value(FEC_RESET_B_GPIO, 1);
}
+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
+ mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
mx25pdk_fec_reset();
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
# Object file lists.
obj-y := mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG) += qong.o
-obj-$(CONFIG_MACH_PCM043) += pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
+++ /dev/null
-/*
- * armadillo5x0.c
- *
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * updates in http://alberdroid.blogspot.com/
- *
- * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
- * Based on mx31ads.c and pcm037.c Great Work!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
-#include <mach/mmc.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-#include "crm_regs.h"
-
-static int armadillo5x0_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- /* UART2 */
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- /* LAN9118_IRQ */
- IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
- /* I2C2 */
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
-};
-
-/* RTC over I2C*/
-#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
-
-static struct i2c_board_info armadillo5x0_i2c_rtc = {
- I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-/* GPIO BUTTONS */
-static struct gpio_keys_button armadillo5x0_buttons[] = {
- {
- .code = KEY_ENTER, /*28*/
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
- .active_low = 1,
- .desc = "menu",
- .wakeup = 1,
- }, {
- .code = KEY_BACK, /*158*/
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
- .active_low = 1,
- .desc = "back",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data armadillo5x0_button_data = {
- .buttons = armadillo5x0_buttons,
- .nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
-};
-
-static struct platform_device armadillo5x0_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &armadillo5x0_button_data,
- }
-};
-
-/*
- * NAND Flash
- */
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/*
- * MTD NOR Flash
- */
-static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
- {
- .name = "nor.bootloader",
- .offset = 0x00000000,
- .size = 4*32*1024,
- }, {
- .name = "nor.kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 16*128*1024,
- }, {
- .name = "nor.userland",
- .offset = MTDPART_OFS_APPEND,
- .size = 110*128*1024,
- }, {
- .name = "nor.config",
- .offset = MTDPART_OFS_APPEND,
- .size = 1*128*1024,
- },
-};
-
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
- .width = 2,
- .parts = armadillo5x0_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
-};
-
-static struct resource armadillo5x0_nor_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + SZ_64M - 1,
-};
-
-static struct platform_device armadillo5x0_nor_flash = {
- .name = "physmap-flash",
- .id = -1,
- .num_resources = 1,
- .resource = &armadillo5x0_nor_flash_resource,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
- { /* 640x480 @ 60 Hz */
- .name = "CRT-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39721,
- .left_margin = 35,
- .right_margin = 115,
- .upper_margin = 43,
- .lower_margin = 1,
- .hsync_len = 10,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {/* 800x600 @ 56 Hz */
- .name = "CRT-SVGA",
- .refresh = 56,
- .xres = 800,
- .yres = 600,
- .pixclock = 30000,
- .left_margin = 30,
- .right_margin = 108,
- .upper_margin = 13,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
- .name = "CRT-VGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-/*
- * SDHC 1
- * MMC support
- */
-static int armadillo5x0_sdhc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static int armadillo5x0_sdhc1_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
-{
- int ret;
- int gpio_det, gpio_wp;
-
- gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
- gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
-
- ret = gpio_request(gpio_det, "sdhc-card-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(gpio_det);
-
- ret = gpio_request(gpio_wp, "sdhc-write-protect");
- if (ret)
- goto err_gpio_free;
-
- gpio_direction_input(gpio_wp);
-
- /* When supported the trigger type have to be BOTH */
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "sdhc-detect", data);
-
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(gpio_wp);
-
-err_gpio_free:
- gpio_free(gpio_det);
-
- return ret;
-
-}
-
-static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
- gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
- .get_ro = armadillo5x0_sdhc1_get_ro,
- .init = armadillo5x0_sdhc1_init,
- .exit = armadillo5x0_sdhc1_exit,
-};
-
-/*
- * SMSC 9118
- * Network support
- */
-static struct resource armadillo5x0_smc911x_resources[] = {
- {
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_16BIT,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device armadillo5x0_smc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
- .resource = armadillo5x0_smc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-/* UART device data */
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
- &armadillo5x0_smc911x_device,
- &mxc_i2c_device1,
- &armadillo5x0_button_device,
-};
-
-/*
- * Perform board specific initializations
- */
-static void __init armadillo5x0_init(void)
-{
- mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
- ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- /* Register UART */
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
- /* SMSC9118 IRQ pin */
- gpio_direction_input(MX31_PIN_GPIO1_0);
-
- /* Register SDHC */
- mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
-
- /* Register FB */
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
-
- /* Register NOR Flash */
- mxc_register_device(&armadillo5x0_nor_flash,
- &armadillo5x0_nor_flash_pdata);
-
- /* Register NAND Flash */
- mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
-
- /* set NAND page size to 2k if not configured via boot mode pins */
- __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
-
- /* RTC */
- /* Get RTC IRQ and register the chip */
- if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
- if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
- armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
- else
- gpio_free(ARMADILLO5X0_RTC_GPIO);
- }
- if (armadillo5x0_i2c_rtc.irq == 0)
- pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
- i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
-}
-
-static void __init armadillo5x0_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static struct sys_timer armadillo5x0_timer = {
- .init = armadillo5x0_timer_init,
-};
-
-MACHINE_START(ARMADILLO5X0, "Armadillo-500")
- /* Maintainer: Alberto Panizzo */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x00000100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .timer = &armadillo5x0_timer,
- .init_machine = armadillo5x0_init,
-MACHINE_END
--- /dev/null
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "crm_regs.h"
+
+#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
+
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
+{
+ u32 min_pre, temp_pre, old_err, err;
+
+ if (div >= 512) {
+ *pre = 8;
+ *post = 64;
+ } else if (div >= 64) {
+ min_pre = (div - 1) / 64 + 1;
+ old_err = 8;
+ for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
+ err = div % temp_pre;
+ if (err == 0) {
+ *pre = temp_pre;
+ break;
+ }
+ err = temp_pre - err;
+ if (err < old_err) {
+ old_err = err;
+ *pre = temp_pre;
+ }
+ }
+ *post = (div + *pre - 1) / *pre;
+ } else if (div <= 8) {
+ *pre = div;
+ *post = 1;
+ } else {
+ *pre = 1;
+ *post = div;
+ }
+}
+
+static struct clk mcu_pll_clk;
+static struct clk serial_pll_clk;
+static struct clk ipg_clk;
+static struct clk ckih_clk;
+
+static int cgr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ if (!clk->enable_reg)
+ return 0;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 3 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void cgr_disable(struct clk *clk)
+{
+ u32 reg;
+
+ if (!clk->enable_reg)
+ return;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(3 << clk->enable_shift);
+
+ /* special case for EMI clock */
+ if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
+ reg |= (1 << clk->enable_shift);
+
+ __raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long pll_ref_get_rate(void)
+{
+ unsigned long ccmr;
+ unsigned int prcs;
+
+ ccmr = __raw_readl(MXC_CCM_CCMR);
+ prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
+ if (prcs == 0x1)
+ return CKIL_CLK_FREQ * 1024;
+ else
+ return clk_get_rate(&ckih_clk);
+}
+
+static unsigned long usb_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(MXC_CCM_UPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long serial_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg;
+
+ reg = __raw_readl(MXC_CCM_SRPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static unsigned long mcu_pll_get_rate(struct clk *clk)
+{
+ unsigned long reg, ccmr;
+
+ ccmr = __raw_readl(MXC_CCM_CCMR);
+
+ if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
+ return clk_get_rate(&ckih_clk);
+
+ reg = __raw_readl(MXC_CCM_MPCTL);
+
+ return mxc_decode_pll(reg, pll_ref_get_rate());
+}
+
+static int usb_pll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg |= MXC_CCM_CCMR_UPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+
+ /* No lock bit on MX31, so using max time from spec */
+ udelay(80);
+
+ return 0;
+}
+
+static void usb_pll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg &= ~MXC_CCM_CCMR_UPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+static int serial_pll_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg |= MXC_CCM_CCMR_SPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+
+ /* No lock bit on MX31, so using max time from spec */
+ udelay(80);
+
+ return 0;
+}
+
+static void serial_pll_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCMR);
+ reg &= ~MXC_CCM_CCMR_SPE;
+ __raw_writel(reg, MXC_CCM_CCMR);
+}
+
+#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
+#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
+#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
+
+static unsigned long mcu_main_get_rate(struct clk *clk)
+{
+ u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
+
+ if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
+ return clk_get_rate(&serial_pll_clk);
+ else
+ return clk_get_rate(&mcu_pll_clk);
+}
+
+static unsigned long ahb_get_rate(struct clk *clk)
+{
+ unsigned long max_pdf;
+
+ max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
+ MXC_CCM_PDR0_MAX_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (max_pdf + 1);
+}
+
+static unsigned long ipg_get_rate(struct clk *clk)
+{
+ unsigned long ipg_pdf;
+
+ ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
+ MXC_CCM_PDR0_IPG_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ipg_pdf + 1);
+}
+
+static unsigned long nfc_get_rate(struct clk *clk)
+{
+ unsigned long nfc_pdf;
+
+ nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
+ MXC_CCM_PDR0_NFC_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (nfc_pdf + 1);
+}
+
+static unsigned long hsp_get_rate(struct clk *clk)
+{
+ unsigned long hsp_pdf;
+
+ hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
+ MXC_CCM_PDR0_HSP_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (hsp_pdf + 1);
+}
+
+static unsigned long usb_get_rate(struct clk *clk)
+{
+ unsigned long usb_pdf, usb_prepdf;
+
+ usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
+ MXC_CCM_PDR1_USB_PODF_OFFSET);
+ usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
+ MXC_CCM_PDR1_USB_PRDF_OFFSET);
+ return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
+}
+
+static unsigned long csi_get_rate(struct clk *clk)
+{
+ u32 reg, pre, post;
+
+ reg = __raw_readl(MXC_CCM_PDR0);
+ pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
+ MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+ pre++;
+ post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
+ MXC_CCM_PDR0_CSI_PODF_OFFSET;
+ post++;
+ return clk_get_rate(clk->parent) / (pre * post);
+}
+
+static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 pre, post, parent = clk_get_rate(clk->parent);
+ u32 div = parent / rate;
+
+ if (parent % rate)
+ div++;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ return parent / (pre * post);
+}
+
+static int csi_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+
+ if ((parent / div) != rate)
+ return -EINVAL;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ /* Set CSI clock divider */
+ reg = __raw_readl(MXC_CCM_PDR0) &
+ ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
+ reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
+ reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
+ __raw_writel(reg, MXC_CCM_PDR0);
+
+ return 0;
+}
+
+static unsigned long ssi1_get_rate(struct clk *clk)
+{
+ unsigned long ssi1_pdf, ssi1_prepdf;
+
+ ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
+ MXC_CCM_PDR1_SSI1_PODF_OFFSET);
+ ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
+ MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
+}
+
+static unsigned long ssi2_get_rate(struct clk *clk)
+{
+ unsigned long ssi2_pdf, ssi2_prepdf;
+
+ ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
+ MXC_CCM_PDR1_SSI2_PODF_OFFSET);
+ ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
+ MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
+}
+
+static unsigned long firi_get_rate(struct clk *clk)
+{
+ unsigned long firi_pdf, firi_prepdf;
+
+ firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
+ MXC_CCM_PDR1_FIRI_PODF_OFFSET);
+ firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
+ MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
+ return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
+}
+
+static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 pre, post;
+ u32 parent = clk_get_rate(clk->parent);
+ u32 div = parent / rate;
+
+ if (parent % rate)
+ div++;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ return parent / (pre * post);
+
+}
+
+static int firi_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
+
+ div = parent / rate;
+
+ if ((parent / div) != rate)
+ return -EINVAL;
+
+ __calc_pre_post_dividers(div, &pre, &post);
+
+ /* Set FIRI clock divider */
+ reg = __raw_readl(MXC_CCM_PDR1) &
+ ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
+ reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
+ reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_PDR1);
+
+ return 0;
+}
+
+static unsigned long mbx_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static unsigned long mstick1_get_rate(struct clk *clk)
+{
+ unsigned long msti_pdf;
+
+ msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
+ MXC_CCM_PDR2_MST1_PDF_OFFSET);
+ return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long mstick2_get_rate(struct clk *clk)
+{
+ unsigned long msti_pdf;
+
+ msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
+ MXC_CCM_PDR2_MST2_PDF_OFFSET);
+ return clk_get_rate(clk->parent) / (msti_pdf + 1);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+ return ckih_rate;
+}
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+ return CKIL_CLK_FREQ;
+}
+
+static struct clk ckih_clk = {
+ .get_rate = clk_ckih_get_rate,
+};
+
+static struct clk mcu_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = mcu_pll_get_rate,
+};
+
+static struct clk mcu_main_clk = {
+ .parent = &mcu_pll_clk,
+ .get_rate = mcu_main_get_rate,
+};
+
+static struct clk serial_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = serial_pll_get_rate,
+ .enable = serial_pll_enable,
+ .disable = serial_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+ .parent = &ckih_clk,
+ .get_rate = usb_pll_get_rate,
+ .enable = usb_pll_enable,
+ .disable = usb_pll_disable,
+};
+
+static struct clk ahb_clk = {
+ .parent = &mcu_main_clk,
+ .get_rate = ahb_get_rate,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
+
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = getsetround##_get_rate, \
+ .set_rate = getsetround##_set_rate, \
+ .round_rate = getsetround##_round_rate, \
+ .enable = cgr_enable, \
+ .disable = cgr_disable, \
+ .secondary = s, \
+ .parent = p, \
+ }
+
+DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
+DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
+DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
+
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
+DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
+
+DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
+DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK(NULL, "emi", emi_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit1_clk)
+ _REGISTER_CLOCK(NULL, "epit", epit2_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
+ _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
+ _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
+ _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+ _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+ _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK(NULL, "firi", firi_clk)
+ _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+ _REGISTER_CLOCK(NULL, "rng", rng_clk)
+ _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+ _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
+ _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
+ _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
+ _REGISTER_CLOCK(NULL, "scc", scc_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
+ _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
+ _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+ _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
+};
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+ u32 reg;
+ int i;
+
+ ckih_rate = fref;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* change the csi_clk parent if necessary */
+ reg = __raw_readl(MXC_CCM_CCMR);
+ if (!(reg & MXC_CCM_CCMR_CSCS))
+ if (clk_set_parent(&csi_clk, &usb_pll_clk))
+ pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
+ /* Turn off all possible clocks */
+ __raw_writel((3 << 4), MXC_CCM_CGR0);
+ __raw_writel(0, MXC_CCM_CGR1);
+ __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
+ 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
+ MX32, but still required to be set */
+ MXC_CCM_CGR2);
+
+ /*
+ * Before turning off usb_pll make sure ipg_per_clk is generated
+ * by ipg_clk and not usb_pll.
+ */
+ __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
+ usb_pll_disable(&usb_pll_clk);
+
+ pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
+
+ clk_enable(&gpt_clk);
+ clk_enable(&emi_clk);
+ clk_enable(&iim_clk);
+
+ clk_enable(&serial_pll_clk);
+
+ mx31_read_cpu_rev();
+
+ if (mx31_revision() >= MX31_CHIP_REV_2_0) {
+ reg = __raw_readl(MXC_CCM_PMCR1);
+ /* No PLL restart on DVFS switch; enable auto EMI handshake */
+ reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
+ __raw_writel(reg, MXC_CCM_PMCR1);
+ }
+
+ mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+ MX31_INT_GPT);
+
+ return 0;
+}
+
#include <mach/hardware.h>
#include <mach/common.h>
-#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
#define CCM_CCMR 0x00
#define CCM_PDR0 0x04
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
- mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+ mxc_timer_init(&gpt_clk,
+ MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
return 0;
}
+++ /dev/null
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crm_regs.h"
-
-#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
- u32 min_pre, temp_pre, old_err, err;
-
- if (div >= 512) {
- *pre = 8;
- *post = 64;
- } else if (div >= 64) {
- min_pre = (div - 1) / 64 + 1;
- old_err = 8;
- for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
- err = div % temp_pre;
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
- err = temp_pre - err;
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
- *post = (div + *pre - 1) / *pre;
- } else if (div <= 8) {
- *pre = div;
- *post = 1;
- } else {
- *pre = 1;
- *post = div;
- }
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return 0;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 3 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
-
- /* special case for EMI clock */
- if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
- reg |= (1 << clk->enable_shift);
-
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
- unsigned long ccmr;
- unsigned int prcs;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
- prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
- if (prcs == 0x1)
- return CKIL_CLK_FREQ * 1024;
- else
- return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_UPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_SRPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
- unsigned long reg, ccmr;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
-
- if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
- return clk_get_rate(&ckih_clk);
-
- reg = __raw_readl(MXC_CCM_MPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
- u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
- if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
- return clk_get_rate(&serial_pll_clk);
- else
- return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
- unsigned long max_pdf;
-
- max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
- MXC_CCM_PDR0_MAX_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
- unsigned long ipg_pdf;
-
- ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
- MXC_CCM_PDR0_IPG_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
- unsigned long nfc_pdf;
-
- nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
- MXC_CCM_PDR0_NFC_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
- unsigned long hsp_pdf;
-
- hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
- MXC_CCM_PDR0_HSP_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
- unsigned long usb_pdf, usb_prepdf;
-
- usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
- MXC_CCM_PDR1_USB_PODF_OFFSET);
- usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
- MXC_CCM_PDR1_USB_PRDF_OFFSET);
- return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
- u32 reg, pre, post;
-
- reg = __raw_readl(MXC_CCM_PDR0);
- pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
- MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- pre++;
- post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
- MXC_CCM_PDR0_CSI_PODF_OFFSET;
- post++;
- return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post, parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set CSI clock divider */
- reg = __raw_readl(MXC_CCM_PDR0) &
- ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
- reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
- reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR0);
-
- return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
- unsigned long ssi1_pdf, ssi1_prepdf;
-
- ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PODF_OFFSET);
- ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
- unsigned long ssi2_pdf, ssi2_prepdf;
-
- ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PODF_OFFSET);
- ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
- unsigned long firi_pdf, firi_prepdf;
-
- firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PODF_OFFSET);
- firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post;
- u32 parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set FIRI clock divider */
- reg = __raw_readl(MXC_CCM_PDR1) &
- ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
- reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
- reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR1);
-
- return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
- MXC_CCM_PDR2_MST1_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
- MXC_CCM_PDR2_MST2_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
- return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
- .get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
- .parent = &mcu_pll_clk,
- .get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = serial_pll_get_rate,
- .enable = serial_pll_enable,
- .disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = usb_pll_get_rate,
- .enable = usb_pll_enable,
- .disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
- .parent = &mcu_main_clk,
- .get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = getsetround##_get_rate, \
- .set_rate = getsetround##_set_rate, \
- .round_rate = getsetround##_round_rate, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "epit", epit1_clk)
- _REGISTER_CLOCK(NULL, "epit", epit2_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
- _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
- _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK(NULL, "firi", firi_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "rng", rng_clk)
- _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
- _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
- _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
- _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
- _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
- _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
- u32 reg;
- int i;
-
- ckih_rate = fref;
-
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
-
- /* change the csi_clk parent if necessary */
- reg = __raw_readl(MXC_CCM_CCMR);
- if (!(reg & MXC_CCM_CCMR_CSCS))
- if (clk_set_parent(&csi_clk, &usb_pll_clk))
- pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
- /* Turn off all possible clocks */
- __raw_writel((3 << 4), MXC_CCM_CGR0);
- __raw_writel(0, MXC_CCM_CGR1);
- __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
- 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
- MX32, but still required to be set */
- MXC_CCM_CGR2);
-
- /*
- * Before turning off usb_pll make sure ipg_per_clk is generated
- * by ipg_clk and not usb_pll.
- */
- __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
- usb_pll_disable(&usb_pll_clk);
-
- pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
- clk_enable(&gpt_clk);
- clk_enable(&emi_clk);
- clk_enable(&iim_clk);
-
- clk_enable(&serial_pll_clk);
-
- mx31_read_cpu_rev();
-
- if (mx31_revision() >= CHIP_REV_2_0) {
- reg = __raw_readl(MXC_CCM_PMCR1);
- /* No PLL restart on DVFS switch; enable auto EMI handshake */
- reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
- __raw_writel(reg, MXC_CCM_PMCR1);
- }
-
- mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
-
- return 0;
-}
-
u32 i, srev;
/* read SREV register from IIM module */
- srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+ srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
-#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
/* Register addresses */
#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
--- /dev/null
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
+#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
+#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
+#define IOMUXGPR (IOMUX_BASE + 0x008)
+#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
+#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int pin_mode)
+{
+ u32 field, l, mode, ret = 0;
+ void __iomem *reg;
+
+ reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
+ field = pin_mode & 0x3;
+ mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0xff << (field * 8));
+ l |= mode << (field * 8);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+ u32 field, l;
+ void __iomem *reg;
+
+ pin &= IOMUX_PADNUM_MASK;
+ reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+ field = (pin + 2) % 3;
+
+ pr_debug("%s: reg offset = 0x%x, field = %d\n",
+ __func__, (pin + 2) / 3, field);
+
+ spin_lock(&gpio_mux_lock);
+
+ l = __raw_readl(reg);
+ l &= ~(0x1ff << (field * 10));
+ l |= config << (field * 10);
+ __raw_writel(l, reg);
+
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+ if (pad >= (PIN_MAX + 1)) {
+ printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+ pad, label ? label : "?");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+ printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+ pad, label ? label : "?");
+ return -EBUSY;
+ }
+ mxc_iomux_mode(pin);
+
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+ const char *label)
+{
+ unsigned int *p = pin_list;
+ int i;
+ int ret = -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_release_multiple_pins(pin_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin)
+{
+ unsigned pad = pin & IOMUX_PADNUM_MASK;
+
+ if (pad < (PIN_MAX + 1))
+ clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+ unsigned int *p = pin_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_release_pin(*p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
+{
+ u32 l;
+
+ spin_lock(&gpio_mux_lock);
+ l = __raw_readl(IOMUXGPR);
+ if (en)
+ l |= gp;
+ else
+ l &= ~gp;
+
+ __raw_writel(l, IOMUXGPR);
+ spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_gpr);
+++ /dev/null
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mx3.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
-#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
-#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
-#define IOMUXGPR (IOMUX_BASE + 0x008)
-#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C)
-#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
- u32 field, l, mode, ret = 0;
- void __iomem *reg;
-
- reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
- field = pin_mode & 0x3;
- mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0xff << (field * 8));
- l |= mode << (field * 8);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
- u32 field, l;
- void __iomem *reg;
-
- pin &= IOMUX_PADNUM_MASK;
- reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
- field = (pin + 2) % 3;
-
- pr_debug("%s: reg offset = 0x%x, field = %d\n",
- __func__, (pin + 2) / 3, field);
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0x1ff << (field * 10));
- l |= config << (field * 10);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad >= (PIN_MAX + 1)) {
- printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
- pad, label ? label : "?");
- return -EINVAL;
- }
-
- if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
- printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
- pad, label ? label : "?");
- return -EBUSY;
- }
- mxc_iomux_mode(pin);
-
- return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
- const char *label)
-{
- unsigned int *p = pin_list;
- int i;
- int ret = -EINVAL;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_alloc_pin(*p, label);
- if (ret)
- goto setup_error;
- p++;
- }
- return 0;
-
-setup_error:
- mxc_iomux_release_multiple_pins(pin_list, i);
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(const unsigned int pin)
-{
- unsigned pad = pin & IOMUX_PADNUM_MASK;
-
- if (pad < (PIN_MAX + 1))
- clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
-{
- unsigned int *p = pin_list;
- int i;
-
- for (i = 0; i < count; i++) {
- mxc_iomux_release_pin(*p);
- p++;
- }
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
-{
- u32 l;
-
- spin_lock(&gpio_mux_lock);
- l = __raw_readl(IOMUXGPR);
- if (en)
- l |= gp;
- else
- l &= ~gp;
-
- __raw_writel(l, IOMUXGPR);
- spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
+++ /dev/null
-/*
- * KZM-ARM11-01 support
- * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * based on code for MX31ADS,
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/types.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-kzmarm11.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/memory.h>
-
-#include "devices.h"
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*
- * KZM-ARM11-01 has an external UART on FPGA
- */
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = IO_ADDRESS(KZM_ARM11_16550),
- .mapbase = KZM_ARM11_16550,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
- .irqflags = IRQ_TYPE_EDGE_RISING,
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_BUGGY_UART,
- },
- {},
-};
-
-static struct resource serial8250_resources[] = {
- {
- .start = KZM_ARM11_16550,
- .end = KZM_ARM11_16550 + 0x10,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
- .num_resources = ARRAY_SIZE(serial8250_resources),
- .resource = serial8250_resources,
-};
-
-static int __init kzm_init_ext_uart(void)
-{
- u8 tmp;
-
- /*
- * GPIO 1-1: external UART interrupt line
- */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
- /*
- * Unmask UART interrupt
- */
- tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
- tmp |= 0x2;
- __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
-
- return platform_device_register(&serial_device);
-}
-#else
-static inline int kzm_init_ext_uart(void)
-{
- return 0;
-}
-#endif
-
-/*
- * SMSC LAN9118
- */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-static struct smsc911x_platform_config kzm_smsc9118_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct resource kzm_smsc9118_resources[] = {
- {
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + SZ_128K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device kzm_smsc9118_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(kzm_smsc9118_resources),
- .resource = kzm_smsc9118_resources,
- .dev = {
- .platform_data = &kzm_smsc9118_config,
- },
-};
-
-static int __init kzm_init_smsc9118(void)
-{
- /*
- * GPIO 1-2: SMSC9118 interrupt line
- */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
- return platform_device_register(&kzm_smsc9118_device);
-}
-#else
-static inline int kzm_init_smsc9118(void)
-{
- return 0;
-}
-#endif
-
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init kzm_init_imx_uart(void)
-{
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
-}
-#else
-static inline void kzm_init_imx_uart(void)
-{
-}
-#endif
-
-static int kzm_pins[] __initdata = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- MX31_PIN_DCD_DCE1__DCD_DCE1,
- MX31_PIN_RI_DCE1__RI_DCE1,
- MX31_PIN_DSR_DCE1__DSR_DCE1,
- MX31_PIN_DTR_DCE1__DTR_DCE1,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_DCD_DTE1__DCD_DTE2,
- MX31_PIN_RI_DTE1__RI_DTE2,
- MX31_PIN_DSR_DTE1__DSR_DTE2,
- MX31_PIN_DTR_DTE1__DTR_DTE2,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init kzm_board_init(void)
-{
- mxc_iomux_setup_multiple_pins(kzm_pins,
- ARRAY_SIZE(kzm_pins), "kzm");
- kzm_init_ext_uart();
- kzm_init_smsc9118();
- kzm_init_imx_uart();
-
- pr_info("Clock input source is 26MHz\n");
-}
-
-/*
- * This structure defines static mappings for the kzm-arm11-01 board.
- */
-static struct map_desc kzm_io_desc[] __initdata = {
- {
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
- .type = MT_DEVICE
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init kzm_map_io(void)
-{
- mx31_map_io();
- iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
-}
-
-static void __init kzm_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static struct sys_timer kzm_timer = {
- .init = kzm_timer_init,
-};
-
-/*
- * The following uses standard kernel macros define in arch.h in order to
- * initialize __mach_desc_KZM_ARM11_01 data structure.
- */
-MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = kzm_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = kzm_board_init,
- .timer = &kzm_timer,
-MACHINE_END
--- /dev/null
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+#include "crm_regs.h"
+
+static int armadillo5x0_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ /* LAN9118_IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+ /* I2C2 */
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+ {
+ .code = KEY_ENTER, /*28*/
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+ .active_low = 1,
+ .desc = "menu",
+ .wakeup = 1,
+ }, {
+ .code = KEY_BACK, /*158*/
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
+ .active_low = 1,
+ .desc = "back",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+ .buttons = armadillo5x0_buttons,
+ .nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &armadillo5x0_button_data,
+ }
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+ {
+ .name = "nor.bootloader",
+ .offset = 0x00000000,
+ .size = 4*32*1024,
+ }, {
+ .name = "nor.kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16*128*1024,
+ }, {
+ .name = "nor.userland",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 110*128*1024,
+ }, {
+ .name = "nor.config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1*128*1024,
+ },
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+ .width = 2,
+ .parts = armadillo5x0_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &armadillo5x0_nor_flash_resource,
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+ { /* 640x480 @ 60 Hz */
+ .name = "CRT-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 35,
+ .right_margin = 115,
+ .upper_margin = 43,
+ .lower_margin = 1,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {/* 800x600 @ 56 Hz */
+ .name = "CRT-SVGA",
+ .refresh = 56,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 30000,
+ .left_margin = 30,
+ .right_margin = 108,
+ .upper_margin = 13,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "CRT-VGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+ int gpio_det, gpio_wp;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+ ret = gpio_request(gpio_det, "sdhc-card-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(gpio_det);
+
+ ret = gpio_request(gpio_wp, "sdhc-write-protect");
+ if (ret)
+ goto err_gpio_free;
+
+ gpio_direction_input(gpio_wp);
+
+ /* When supported the trigger type have to be BOTH */
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(gpio_wp);
+
+err_gpio_free:
+ gpio_free(gpio_det);
+
+ return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .get_ro = armadillo5x0_sdhc1_get_ro,
+ .init = armadillo5x0_sdhc1_init,
+ .exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+ {
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+ .flags = SMSC911X_USE_16BIT,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+ .resource = armadillo5x0_smc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_info,
+ },
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &armadillo5x0_smc911x_device,
+ &mxc_i2c_device1,
+ &armadillo5x0_button_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+ mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+ ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* Register UART */
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ /* SMSC9118 IRQ pin */
+ gpio_direction_input(MX31_PIN_GPIO1_0);
+
+ /* Register SDHC */
+ mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+ /* Register FB */
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+ /* Register NOR Flash */
+ mxc_register_device(&armadillo5x0_nor_flash,
+ &armadillo5x0_nor_flash_pdata);
+
+ /* Register NAND Flash */
+ mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+ /* set NAND page size to 2k if not configured via boot mode pins */
+ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+ /* RTC */
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+ if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+ armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+ else
+ gpio_free(ARMADILLO5X0_RTC_GPIO);
+ }
+ if (armadillo5x0_i2c_rtc.irq == 0)
+ pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+ i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+ .init = armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+ /* Maintainer: Alberto Panizzo */
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = mx31_map_io,
+ .init_irq = mx31_init_irq,
+ .timer = &armadillo5x0_timer,
+ .init_machine = armadillo5x0_init,
+MACHINE_END
--- /dev/null
+/*
+ * KZM-ARM11-01 support
+ * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-kzmarm11.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/memory.h>
+
+#include "devices.h"
+
+#define KZM_ARM11_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX31_CS4) ?: \
+ IMX_IO_ADDRESS(x, MX31_CS5) ?: \
+ MX31_IO_ADDRESS(x))
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
+ .mapbase = KZM_ARM11_16550,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ .irqflags = IRQ_TYPE_EDGE_RISING,
+ .uartclk = 14745600,
+ .regshift = 0,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_BUGGY_UART,
+ },
+ {},
+};
+
+static struct resource serial8250_resources[] = {
+ {
+ .start = KZM_ARM11_16550,
+ .end = KZM_ARM11_16550 + 0x10,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(serial8250_resources),
+ .resource = serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+ u8 tmp;
+
+ /*
+ * GPIO 1-1: external UART interrupt line
+ */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+ /*
+ * Unmask UART interrupt
+ */
+ tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+ tmp |= 0x2;
+ __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
+
+ return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+ {
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device kzm_smsc9118_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kzm_smsc9118_resources),
+ .resource = kzm_smsc9118_resources,
+ .dev = {
+ .platform_data = &kzm_smsc9118_config,
+ },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+ /*
+ * GPIO 1-2: SMSC9118 interrupt line
+ */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+ return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ MX31_PIN_DCD_DCE1__DCD_DCE1,
+ MX31_PIN_RI_DCE1__RI_DCE1,
+ MX31_PIN_DSR_DCE1__DSR_DCE1,
+ MX31_PIN_DTR_DCE1__DTR_DCE1,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_DCD_DTE1__DCD_DTE2,
+ MX31_PIN_RI_DTE1__RI_DTE2,
+ MX31_PIN_DSR_DTE1__DSR_DTE2,
+ MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+ mxc_iomux_setup_multiple_pins(kzm_pins,
+ ARRAY_SIZE(kzm_pins), "kzm");
+ kzm_init_ext_uart();
+ kzm_init_smsc9118();
+ kzm_init_imx_uart();
+
+ pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+ {
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+ .init = kzm_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros define in arch.h in order to
+ * initialize __mach_desc_KZM_ARM11_01 data structure.
+ */
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = kzm_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = kzm_board_init,
+ .timer = &kzm_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31pdk.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/*!
+ * @file mx31pdk.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+static int mx31pdk_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+ {
+ .start = LAN9217_BASE_ADDR,
+ .end = LAN9217_BASE_ADDR + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = EXPIO_INT_ENET,
+ .end = EXPIO_INT_ENET,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+{
+ uint32_t imr_val;
+ uint32_t int_valid;
+ uint32_t expio_irq;
+
+ imr_val = __raw_readw(CPLD_INT_MASK_REG);
+ int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+ expio_irq = MXC_EXP_IO_BASE;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+ generic_handle_irq(expio_irq);
+ }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* mask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg |= 1 << expio;
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* clear the interrupt status */
+ __raw_writew(1 << expio, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ /* mask the interrupt */
+ expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* unmask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg &= ~(1 << expio);
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .ack = expio_ack_irq,
+ .mask = expio_mask_irq,
+ .unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+ int i;
+ int ret;
+
+ /* Check if there's a debug board connected */
+ if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+ /* No Debug board found */
+ return -ENODEV;
+ }
+
+ pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ __raw_readw(CPLD_CODE_VER_REG));
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+ /* Disable the interrupts and clear the status */
+ __raw_writew(0, CPLD_INT_MASK_REG);
+ __raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ __raw_writew(0x1F, CPLD_INT_MASK_REG);
+ for (i = MXC_EXP_IO_BASE;
+ i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+ i++) {
+ set_irq_chip(i, &expio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+ return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+ {
+ .virtual = MX31_CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+ .length = MX31_CS5_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+ "mx31pdk");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ if (!mx31pdk_init_expio())
+ platform_device_register(&smsc911x_device);
+}
+
+static void __init mx31pdk_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31pdk_timer = {
+ .init = mx31pdk_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31PDK data structure.
+ */
+MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31pdk_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx31pdk_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#include "devices.h"
+
+/*!
+ * @file mx31ads.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*!
+ * The serial port definition structure.
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+ .irq = EXPIO_INT_XUART_INTA,
+ .uartclk = 14745600,
+ .regshift = 0,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+ }, {
+ .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
+ .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+ .irq = EXPIO_INT_XUART_INTB,
+ .uartclk = 14745600,
+ .regshift = 0,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+ },
+ {},
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static int __init mxc_init_extuart(void)
+{
+ return platform_device_register(&serial_device);
+}
+#else
+static inline int mxc_init_extuart(void)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static unsigned int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* !SERIAL_IMX */
+
+static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 imr_val;
+ u32 int_valid;
+ u32 expio_irq;
+
+ imr_val = __raw_readw(PBC_INTMASK_SET_REG);
+ int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+
+ expio_irq = MXC_EXP_IO_BASE;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+
+ generic_handle_irq(expio_irq);
+ }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+ u32 expio = MXC_IRQ_TO_EXPIO(irq);
+ /* mask the interrupt */
+ __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+ __raw_readw(PBC_INTMASK_CLEAR_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq an expanded io virtual irq number
+ */
+static void expio_ack_irq(u32 irq)
+{
+ u32 expio = MXC_IRQ_TO_EXPIO(irq);
+ /* clear the interrupt status */
+ __raw_writew(1 << expio, PBC_INTSTATUS_REG);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq a expio virtual irq number
+ */
+static void expio_unmask_irq(u32 irq)
+{
+ u32 expio = MXC_IRQ_TO_EXPIO(irq);
+ /* unmask the interrupt */
+ __raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .name = "EXPIO(CPLD)",
+ .ack = expio_ack_irq,
+ .mask = expio_mask_irq,
+ .unmask = expio_unmask_irq,
+};
+
+static void __init mx31ads_init_expio(void)
+{
+ int i;
+
+ printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+
+ /* disable the interrupt and clear the status */
+ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+ __raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+ for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+ i++) {
+ set_irq_chip(i, &expio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+}
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board. When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+ {
+ .supply = "cpu_vcc",
+ }
+};
+
+static struct regulator_init_data sw1a_data = {
+ .constraints = {
+ .name = "SW1A",
+ .min_uV = 1275000,
+ .max_uV = 1600000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .state_mem = {
+ .uV = 1400000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+ .consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+ .constraints = {
+ .name = "VIOHO",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .state_mem = {
+ .uV = 2800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+ .constraints = {
+ .name = "VIOLO",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+ .constraints = {
+ .name = "SW2A",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .state_disk = {
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 0,
+ },
+ .always_on = 1,
+ .boot_on = 1,
+ .initial_state = PM_SUSPEND_MEM,
+ },
+};
+
+static struct regulator_init_data ldo1_data = {
+ .constraints = {
+ .name = "VCAM/VMMC1/VMMC2",
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+ { .supply = "AVDD", .dev_name = "1-001a" },
+ { .supply = "HPVDD", .dev_name = "1-001a" },
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+ .constraints = {
+ .name = "VESIM/VSIM/AVDD",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+ .consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+ .constraints = {
+ .name = "VDIG",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+ .constraints = {
+ .name = "VRF1/CVDD_2.775",
+ .min_uV = 2500000,
+ .max_uV = 2500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+ .name = "wm8350:white",
+ .default_trigger = "heartbeat",
+ .max_uA = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+ .vmid_discharge_msecs = 1000,
+ .drain_msecs = 30,
+ .cap_discharge_msecs = 700,
+ .vmid_charge_msecs = 700,
+ .vmid_s_curve = WM8350_S_CURVE_SLOW,
+ .dis_out4 = WM8350_DISCHARGE_SLOW,
+ .dis_out3 = WM8350_DISCHARGE_SLOW,
+ .dis_out2 = WM8350_DISCHARGE_SLOW,
+ .dis_out1 = WM8350_DISCHARGE_SLOW,
+ .vroi_out4 = WM8350_TIE_OFF_500R,
+ .vroi_out3 = WM8350_TIE_OFF_500R,
+ .vroi_out2 = WM8350_TIE_OFF_500R,
+ .vroi_out1 = WM8350_TIE_OFF_500R,
+ .vroi_enable = 0,
+ .codec_current_on = WM8350_CODEC_ISEL_1_0,
+ .codec_current_standby = WM8350_CODEC_ISEL_0_5,
+ .codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+ wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_ON);
+
+ wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_ON);
+
+ wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+ WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+ WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+ WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+ WM8350_GPIO_DEBOUNCE_OFF);
+
+ wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+ wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+ wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+ /* LEDs */
+ wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+ WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+ wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+ WM8350_ISINK_FLASH_DISABLE,
+ WM8350_ISINK_FLASH_TRIG_BIT,
+ WM8350_ISINK_FLASH_DUR_32MS,
+ WM8350_ISINK_FLASH_ON_INSTANT,
+ WM8350_ISINK_FLASH_OFF_INSTANT,
+ WM8350_ISINK_FLASH_MODE_EN);
+ wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+ WM8350_ISINK_MODE_BOOST,
+ WM8350_ISINK_ILIM_NORMAL,
+ WM8350_DC5_RMP_20V,
+ WM8350_DC5_FBSRC_ISINKA);
+ wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+ &wm8350_led_data);
+
+ wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+ regulator_has_full_constraints();
+
+ return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+ .init = mx31_wm8350_init,
+ .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
+};
+#endif
+
+#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+ {
+ I2C_BOARD_INFO("wm8350", 0x1a),
+ .platform_data = &mx31_wm8350_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ },
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+ i2c_register_board_info(1, mx31ads_i2c1_devices,
+ ARRAY_SIZE(mx31ads_i2c1_devices));
+
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+ mxc_register_device(&mxc_i2c_device1, NULL);
+}
+#else
+static void mxc_init_i2c(void)
+{
+}
+#endif
+
+/*!
+ * This structure defines static mappings for the i.MX31ADS board.
+ */
+static struct map_desc mx31ads_io_desc[] __initdata = {
+ {
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE / 2,
+ .type = MT_DEVICE
+ },
+};
+
+/*!
+ * Set up static virtual mappings.
+ */
+static void __init mx31ads_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
+}
+
+static void __init mx31ads_init_irq(void)
+{
+ mx31_init_irq();
+ mx31ads_init_expio();
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_init_extuart();
+ mxc_init_imx_uart();
+ mxc_init_i2c();
+}
+
+static void __init mx31ads_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31ads_timer = {
+ .init = mx31ads_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31ADS data structure.
+ */
+MACHINE_START(MX31ADS, "Freescale MX31ADS")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31ads_map_io,
+ .init_irq = mx31ads_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx31ads_timer,
+MACHINE_END
--- /dev/null
+/*
+ * LILLY-1131 module support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+ {
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT |
+ SMSC911X_SAVE_MAC_ADDRESS |
+ SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc91x_resources),
+ .resource = smsc91x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ }
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource nor_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = &nor_flash_resource,
+ .num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &smsc91x_device,
+ &physmap_flash_device,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+ .chipselect = spi_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+ .chipselect = spi_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &mc13783_pdata,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+ switch (mx31lilly_baseboard) {
+ case MX31LILLY_NOBOARD:
+ break;
+ case MX31LILLY_DB:
+ mx31lilly_db_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+ mx31lilly_baseboard);
+ }
+
+ mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+
+ /* SPI */
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+ mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+ mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ spi_register_board_info(&mc13783_dev, 1);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+ .init = mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = mx31lilly_board_init,
+ .timer = &mx31lilly_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains the module-specific initialization routines.
+ */
+
+static unsigned int mx31lite_pins[] = {
+ /* LAN9117 IRQ pin */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+ /* SPI 1 */
+ MX31_PIN_CSPI2_SCLK__SCLK,
+ MX31_PIN_CSPI2_MOSI__MOSI,
+ MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0,
+ MX31_PIN_CSPI2_SS1__SS1,
+ MX31_PIN_CSPI2_SS2__SS2,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+ {
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 0x100,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+/*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+ .chipselect = spi_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .flags = MC13783_USE_RTC |
+ MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &mc13783_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#if defined(CONFIG_USB_ULPI)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+ int pins[] = {
+ MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+ MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+ MX31_PIN_USBH2_CLK__USBH2_CLK,
+ MX31_PIN_USBH2_DIR__USBH2_DIR,
+ MX31_PIN_USBH2_NXT__USBH2_NXT,
+ MX31_PIN_USBH2_STP__USBH2_STP,
+ };
+
+ mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+ /* chip select */
+ mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+ "USBH2_CS");
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+ return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = usbh2_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+#endif
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource nor_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = &nor_flash_resource,
+ .num_resources = 1,
+};
+
+
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31lite_io_desc[] __initdata = {
+ {
+ .virtual = MX31_CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+ .length = MX31_CS4_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31lite_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
+}
+
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
+static void __init mxc_board_init(void)
+{
+ int ret;
+
+ switch (mx31lite_baseboard) {
+ case MX31LITE_NOBOARD:
+ break;
+ case MX31LITE_DB:
+ mx31lite_db_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+ mx31lite_baseboard);
+ }
+
+ mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+ "mx31lite");
+
+ /* NOR and NAND flash */
+ platform_device_register(&physmap_flash_device);
+ mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+ mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ spi_register_board_info(&mc13783_spi_dev, 1);
+
+#if defined(CONFIG_USB_ULPI)
+ /* USB */
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+
+ /* SMSC9117 IRQ pin */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ platform_device_register(&smsc911x_device);
+ }
+}
+
+static void __init mx31lite_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+struct sys_timer mx31lite_timer = {
+ .init = mx31lite_timer_init,
+};
+
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31lite_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx31lite_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
+
+#include "devices.h"
+
+static unsigned int moboard_pins[] = {
+ /* UART0 */
+ MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+ MX31_PIN_CTS1__GPIO2_7,
+ /* UART4 */
+ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+ MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+ /* I2C0 */
+ MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+ /* I2C1 */
+ MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+ /* USB reset */
+ MX31_PIN_GPIO1_0__GPIO1_0,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+ /* USB H2 */
+ MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+ MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+ MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+ MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+ MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+ MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+ MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+ MX31_PIN_SCK6__GPIO1_25,
+ /* LEDs */
+ MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+ MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+ /* SEL */
+ MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+ MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+ /* SPI1 */
+ MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+ /* Atlas IRQ */
+ MX31_PIN_GPIO1_3__GPIO1_3,
+ /* SPI2 */
+ MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+ MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS1__CSPI3_SS1,
+};
+
+static struct physmap_flash_data mx31moboard_flash_data = {
+ .width = 2,
+};
+
+static struct resource mx31moboard_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx31moboard_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx31moboard_flash_data,
+ },
+ .resource = &mx31moboard_flash_resource,
+ .num_resources = 1,
+};
+
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+ return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+ .init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+ .bitrate = 400000,
+};
+
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+ .bitrate = 100000,
+};
+
+static int moboard_spi1_cs[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+ .chipselect = moboard_spi1_cs,
+ .num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+ {
+ .dev = &mxcsdhc_device0.dev,
+ .supply = "sdhc0_vcc",
+ },
+ {
+ .dev = &mxcsdhc_device1.dev,
+ .supply = "sdhc1_vcc",
+ },
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+ .constraints = {
+ .min_uV = 2700000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+ .consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+ {
+ .dev = &mx3_camera.dev,
+ .supply = "cam_vcc",
+ },
+};
+
+static struct regulator_init_data cam_vreg_data = {
+ .constraints = {
+ .min_uV = 2700000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+ .consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+ {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &sdhc_vreg_data,
+ },
+ {
+ .id = MC13783_REGU_VCAM,
+ .init_data = &cam_vreg_data,
+ },
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+ .regulators = moboard_regulators,
+ .num_regulators = ARRAY_SIZE(moboard_regulators),
+ .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
+ MC13783_USE_ADC,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ .max_speed_hz = 300000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &moboard_pmic,
+ .mode = SPI_CS_HIGH,
+ },
+};
+
+static int moboard_spi2_cs[] = {
+ MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+ .chipselect = moboard_spi2_cs,
+ .num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
+};
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+ return !gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC1_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_CD);
+
+ ret = gpio_request(SDHC1_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc1-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC1_WP);
+err_gpio_free:
+ gpio_free(SDHC1_CD);
+
+ return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC1_CD), data);
+ gpio_free(SDHC1_WP);
+ gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .get_ro = moboard_sdhc1_get_ro,
+ .init = moboard_sdhc1_init,
+ .exit = moboard_sdhc1_exit,
+};
+
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+ gpio_request(USB_RESET_B, "usb-reset");
+ gpio_direction_output(USB_RESET_B, 0);
+ mdelay(1);
+ gpio_set_value(USB_RESET_B, 1);
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+#if defined(CONFIG_USB_ULPI)
+
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int moboard_usbh2_hw_init(struct platform_device *pdev)
+{
+ int ret = gpio_request(USBH2_EN_B, "usbh2-en");
+ if (ret)
+ return ret;
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+ gpio_direction_output(USBH2_EN_B, 0);
+
+ return 0;
+}
+
+static int moboard_usbh2_hw_exit(struct platform_device *pdev)
+{
+ gpio_free(USBH2_EN_B);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = moboard_usbh2_hw_init,
+ .exit = moboard_usbh2_hw_exit,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
+
+
+static struct gpio_led mx31moboard_leds[] = {
+ {
+ .name = "coreboard-led-0:red:running",
+ .default_trigger = "heartbeat",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+ }, {
+ .name = "coreboard-led-1:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
+ }, {
+ .name = "coreboard-led-2:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
+ }, {
+ .name = "coreboard-led-3:red",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+ },
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+ .num_leds = ARRAY_SIZE(mx31moboard_leds),
+ .leds = mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mx31moboard_led_pdata,
+ },
+};
+
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+ if (!gpio_request(SEL0, "sel0")) {
+ gpio_direction_input(SEL0);
+ gpio_export(SEL0, true);
+ }
+
+ if (!gpio_request(SEL1, "sel1")) {
+ gpio_direction_input(SEL1);
+ gpio_export(SEL1, true);
+ }
+
+ if (!gpio_request(SEL2, "sel2")) {
+ gpio_direction_input(SEL2);
+ gpio_export(SEL2, true);
+ }
+
+ if (!gpio_request(SEL3, "sel3")) {
+ gpio_direction_input(SEL3);
+ gpio_export(SEL3, true);
+ }
+}
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mx31moboard_flash,
+ &mx31moboard_leds_device,
+};
+
+static struct mx3_camera_pdata camera_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+ .mclk_10khz = 4800,
+};
+
+#define CAMERA_BUF_SIZE (4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+ dma_addr_t dma_handle;
+ void *buf;
+ int dma;
+
+ if (buf_size < 2 * 1024 * 1024)
+ return -EINVAL;
+
+ buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+ if (!buf) {
+ pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(buf, 0, buf_size);
+
+ dma = dma_declare_coherent_memory(&mx3_camera.dev,
+ dma_handle, dma_handle, buf_size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+ /* The way we call dma_declare_coherent_memory only a malloc can fail */
+ return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
+static int mx31moboard_baseboard;
+core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+ "moboard");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+
+ mxc_register_device(&mxc_uart_device4, &uart4_pdata);
+
+ mx31moboard_init_sel_gpios();
+
+ mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+ mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+ mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+ mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+ spi_register_board_info(moboard_spi_board_info,
+ ARRAY_SIZE(moboard_spi_board_info));
+
+ mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+ mxc_register_device(&mx3_camera, &camera_pdata);
+
+ usb_xcvr_reset();
+
+ moboard_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ moboard_usbh2_init();
+
+ switch (mx31moboard_baseboard) {
+ case MX31NOBOARD:
+ break;
+ case MX31DEVBOARD:
+ mx31moboard_devboard_init();
+ break;
+ case MX31MARXBOT:
+ mx31moboard_marxbot_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+ mx31moboard_baseboard);
+ }
+}
+
+static void __init mx31moboard_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+struct sys_timer mx31moboard_timer = {
+ .init = mx31moboard_timer_init,
+};
+
+MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
+ /* Maintainer: Valentin Longchamp, EPFL Mobots group */
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx31moboard_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* USBOTG */
+ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+ MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+ .init = mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+ /* Maintainer: Freescale Semiconductor, Inc */
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mx35_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx35pdk_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
+
+#include <media/soc_camera.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
+#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+ if (!strcmp("eet", str))
+ pcm037_instance = PCM037_EET;
+ else if (strcmp("pcm970", str))
+ pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+ return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+ return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+};
+
+static unsigned int pcm037_pins[] = {
+ /* I2C */
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+ MX31_PIN_CSPI2_SS2__I2C3_SDA,
+ MX31_PIN_CSPI2_SCLK__I2C3_SCL,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+ /* SPI1 */
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
+ /* UART2 */
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ /* UART3 */
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ /* LAN9217 irq pin */
+ IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ /* Onewire */
+ MX31_PIN_BATT_LINE__OWIRE,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_D3_REV__D3_REV,
+ MX31_PIN_CONTRAST__CONTRAST,
+ MX31_PIN_D3_SPL__D3_SPL,
+ MX31_PIN_D3_CLS__D3_CLS,
+ MX31_PIN_LCS0__GPI03_23,
+ /* CSI */
+ IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+ MX31_PIN_CSI_D6__CSI_D6,
+ MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8,
+ MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10,
+ MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12,
+ MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14,
+ MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+ MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+ MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ /* GPIO */
+ IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
+};
+
+static struct physmap_flash_data pcm037_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm037_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static int usbotg_pins[] = {
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+ int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+ ARRAY_SIZE(usbotg_pins), "usbotg");
+
+ if (ret < 0) {
+ printk(KERN_ERR "Cannot set up OTG pins\n");
+ return ret;
+ }
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+static struct platform_device pcm037_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm037_flash_data,
+ },
+ .resource = &pcm037_flash_resource,
+ .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource smsc911x_resources[] = {
+ {
+ .start = MX31_CS1_BASE_ADDR + 0x300,
+ .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+ .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
+ SMSC911X_SAVE_MAC_ADDRESS,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device pcm037_eth = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_info,
+ },
+};
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+ .bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+ .start = MX31_CS4_BASE_ADDR,
+ .end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_sram_device = {
+ .name = "mtd-ram",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm038_sram_data,
+ },
+ .num_resources = 1,
+ .resource = &pcm038_sram_resource,
+};
+
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data pcm037_i2c_1_data = {
+ .bitrate = 100000,
+};
+
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+ .bitrate = 20000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static int pcm037_camera_power(struct device *dev, int on)
+{
+ /* disable or enable the camera in X7 or X8 PCM970 connector */
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+ return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_camera[] = {
+ {
+ I2C_BOARD_INFO("mt9t031", 0x5d),
+ }, {
+ I2C_BOARD_INFO("mt9v022", 0x48),
+ },
+};
+
+static struct soc_camera_link iclink_mt9v022 = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm037_i2c_camera[1],
+ .i2c_adapter_id = 2,
+ .module_name = "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .power = pcm037_camera_power,
+ .board_info = &pcm037_i2c_camera[0],
+ .i2c_adapter_id = 2,
+ .module_name = "mt9t031",
+};
+
+static struct i2c_board_info pcm037_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ }
+};
+
+static struct platform_device pcm037_mt9t031 = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink_mt9t031,
+ },
+};
+
+static struct platform_device pcm037_mt9v022 = {
+ .name = "soc-camera-pdrv",
+ .id = 1,
+ .dev = {
+ .platform_data = &iclink_mt9v022,
+ },
+};
+
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+ ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+ gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+ gpio_free(SDHC1_GPIO_DET);
+
+ return ret;
+}
+
+static void pcm970_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ gpio_free(SDHC1_GPIO_DET);
+ gpio_free(SDHC1_GPIO_WP);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+ .get_ro = pcm970_sdhc1_get_ro,
+#endif
+ .init = pcm970_sdhc1_init,
+ .exit = pcm970_sdhc1_exit,
+};
+
+struct mx3_camera_pdata camera_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+ .mclk_10khz = 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+ dma_addr_t dma_handle;
+ void *buf;
+ int dma;
+
+ if (buf_size < 2 * 1024 * 1024)
+ return -EINVAL;
+
+ buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+ if (!buf) {
+ pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(buf, 0, buf_size);
+
+ dma = dma_declare_coherent_memory(&mx3_camera.dev,
+ dma_handle, dma_handle, buf_size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+ /* The way we call dma_declare_coherent_memory only a malloc can fail */
+ return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
+static struct platform_device *devices[] __initdata = {
+ &pcm037_flash,
+ &pcm037_sram_device,
+ &pcm037_mt9t031,
+ &pcm037_mt9v022,
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz Sharp */
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "CMEL-OLED",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct resource pcm970_sja1000_resources[] = {
+ {
+ .start = MX31_CS5_BASE_ADDR,
+ .end = MX31_CS5_BASE_ADDR + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+ .clock = 16000000 / 2,
+ .ocr = 0x40 | 0x18,
+ .cdr = 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+ .name = "sja1000_platform",
+ .dev = {
+ .platform_data = &pcm970_sja1000_platform_data,
+ },
+ .resource = pcm970_sja1000_resources,
+ .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+ "pcm037");
+
+ if (pcm037_variant() == PCM037_EET)
+ mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+ ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+ else
+ mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+ ARRAY_SIZE(pcm037_uart1_handshake_pins),
+ "pcm037_uart1");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata);
+
+ mxc_register_device(&mxc_w1_master_device, NULL);
+
+ /* LAN9217 IRQ pin */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ platform_device_register(&pcm037_eth);
+ }
+
+
+ /* I2C adapters and devices */
+ i2c_register_board_info(1, pcm037_i2c_devices,
+ ARRAY_SIZE(pcm037_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
+ mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
+ mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+ mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ if (!gpio_usbotg_hs_activate())
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+ /* CSI */
+ /* Camera power: default - off */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+ if (!ret)
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+ else
+ iclink_mt9t031.power = NULL;
+
+ if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+ mxc_register_device(&mx3_camera, &camera_pdata);
+
+ platform_device_register(&pcm970_sja1000);
+}
+
+static void __init pcm037_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+struct sys_timer pcm037_timer = {
+ .init = pcm037_timer_init,
+};
+
+MACHINE_START(PCM037, "Phytec Phycore pcm037")
+ /* Maintainer: Pengutronix */
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &pcm037_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+ /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+ IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+ /* GPIO keys */
+ IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
+ IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
+ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
+ IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
+ IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
+ IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
+ IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
+ IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
+ IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
+ IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
+
+ /* LEDs */
+ IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
+ IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
+ IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
+ IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+ {
+ .modalias = "dac124s085",
+ .max_speed_hz = 400000,
+ .bus_num = 0,
+ .chip_select = 0, /* Index in pcm037_spi1_cs[] */
+ .mode = SPI_CPHA,
+ },
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+ .chipselect = pcm037_spi1_cs,
+ .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+ {
+ .type = EV_KEY,
+ .code = KEY_L,
+ .gpio = 0,
+ .desc = "Wheel Manual",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_A,
+ .gpio = 1,
+ .desc = "Wheel AF",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_V,
+ .gpio = 2,
+ .desc = "Wheel View",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_M,
+ .gpio = 3,
+ .desc = "Wheel Menu",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_UP,
+ .gpio = 32,
+ .desc = "Nav Pad Up",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_RIGHT,
+ .gpio = 33,
+ .desc = "Nav Pad Right",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_DOWN,
+ .gpio = 34,
+ .desc = "Nav Pad Down",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_LEFT,
+ .gpio = 35,
+ .desc = "Nav Pad Left",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_ENTER,
+ .gpio = 38,
+ .desc = "Nav Pad Ok",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = KEY_O,
+ .gpio = 39,
+ .desc = "Wheel Off",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_FORWARD,
+ .gpio = 50,
+ .desc = "Focus Forward",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_BACK,
+ .gpio = 51,
+ .desc = "Focus Backward",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_MIDDLE,
+ .gpio = 52,
+ .desc = "Release Half",
+ .wakeup = 0,
+ }, {
+ .type = EV_KEY,
+ .code = BTN_EXTRA,
+ .gpio = 53,
+ .desc = "Release Full",
+ .wakeup = 0,
+ },
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+ .buttons = pcm037_gpio_keys,
+ .nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
+ .rep = 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &pcm037_gpio_keys_platform_data,
+ },
+};
+
+static int eet_init_devices(void)
+{
+ if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+ return 0;
+
+ mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+ ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+ /* SPI */
+ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+ mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+ platform_device_register(&pcm037_gpio_keys_device);
+
+ return 0;
+}
+
+late_initcall(eet_init_devices);
--- /dev/null
+/*
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm043_flash_data,
+ },
+ .resource = &pcm043_flash_resource,
+ .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+ .bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ }
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+ &pcm043_flash,
+ &mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* UART2 */
+ MX35_PAD_CTS2__UART2_CTS,
+ MX35_PAD_RTS2__UART2_RTS,
+ MX35_PAD_TXD2__UART2_TXD_MUX,
+ MX35_PAD_RXD2__UART2_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* I2C1 */
+ MX35_PAD_I2C1_CLK__I2C1_SCL,
+ MX35_PAD_I2C1_DAT__I2C1_SDA,
+ /* Display */
+ MX35_PAD_LD0__IPU_DISPB_DAT_0,
+ MX35_PAD_LD1__IPU_DISPB_DAT_1,
+ MX35_PAD_LD2__IPU_DISPB_DAT_2,
+ MX35_PAD_LD3__IPU_DISPB_DAT_3,
+ MX35_PAD_LD4__IPU_DISPB_DAT_4,
+ MX35_PAD_LD5__IPU_DISPB_DAT_5,
+ MX35_PAD_LD6__IPU_DISPB_DAT_6,
+ MX35_PAD_LD7__IPU_DISPB_DAT_7,
+ MX35_PAD_LD8__IPU_DISPB_DAT_8,
+ MX35_PAD_LD9__IPU_DISPB_DAT_9,
+ MX35_PAD_LD10__IPU_DISPB_DAT_10,
+ MX35_PAD_LD11__IPU_DISPB_DAT_11,
+ MX35_PAD_LD12__IPU_DISPB_DAT_12,
+ MX35_PAD_LD13__IPU_DISPB_DAT_13,
+ MX35_PAD_LD14__IPU_DISPB_DAT_14,
+ MX35_PAD_LD15__IPU_DISPB_DAT_15,
+ MX35_PAD_LD16__IPU_DISPB_DAT_16,
+ MX35_PAD_LD17__IPU_DISPB_DAT_17,
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+ MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+ MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+ /* gpio */
+ MX35_PAD_ATA_CS0__GPIO2_6,
+};
+
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+ i2c_register_board_info(0, pcm043_i2c_devices,
+ ARRAY_SIZE(pcm043_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+ .init = pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+ /* Maintainer: Pengutronix */
+ .phys_io = MX35_AIPS1_BASE_ADDR,
+ .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mx35_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &pcm043_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <mach/board-qong.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/* FPGA defines */
+#define QONG_FPGA_VERSION(major, minor, rev) \
+ (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
+
+#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE (1 << 24)
+
+#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
+#define QONG_FPGA_CTRL_SIZE 0x10
+/* FPGA control registers */
+#define QONG_FPGA_CTRL_VERSION 0x00
+
+#define QONG_DNET_ID 1
+#define QONG_DNET_BASEADDR \
+ (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
+#define QONG_DNET_SIZE 0x00001000
+
+#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
+
+/*
+ * This file contains the board-specific initialization routines.
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int uart_pins[] = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+ mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
+ "uart-0");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static struct resource dnet_resources[] = {
+ {
+ .name = "dnet-memory",
+ .start = QONG_DNET_BASEADDR,
+ .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = QONG_FPGA_IRQ,
+ .end = QONG_FPGA_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dnet_device = {
+ .name = "dnet",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dnet_resources),
+ .resource = dnet_resources,
+};
+
+static int __init qong_init_dnet(void)
+{
+ int ret;
+
+ ret = platform_device_register(&dnet_device);
+ return ret;
+}
+
+/* MTD NOR flash */
+
+static struct physmap_flash_data qong_flash_data = {
+ .width = 2,
+};
+
+static struct resource qong_flash_resource = {
+ .start = MX31_CS0_BASE_ADDR,
+ .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &qong_flash_data,
+ },
+ .resource = &qong_flash_resource,
+ .num_resources = 1,
+};
+
+static void qong_init_nor_mtd(void)
+{
+ (void)platform_device_register(&qong_nor_mtd_device);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
+ else
+ writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int qong_nand_device_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+}
+
+static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip >= 0)
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+ else
+ gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
+}
+
+static struct platform_nand_data qong_nand_data = {
+ .chip = {
+ .chip_delay = 20,
+ .options = 0,
+ },
+ .ctrl = {
+ .cmd_ctrl = qong_nand_cmd_ctrl,
+ .dev_ready = qong_nand_device_ready,
+ .select_chip = qong_nand_select_chip,
+ }
+};
+
+static struct resource qong_nand_resource = {
+ .start = MX31_CS3_BASE_ADDR,
+ .end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device qong_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &qong_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &qong_nand_resource,
+};
+
+static void __init qong_init_nand_mtd(void)
+{
+ /* init CS */
+ mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+ mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
+
+ /* enable pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
+
+ /* ready/busy pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
+
+ /* write protect pin */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
+ if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
+
+ platform_device_register(&qong_nand_device);
+}
+
+static void __init qong_init_fpga(void)
+{
+ void __iomem *regs;
+ u32 fpga_ver;
+
+ regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
+ if (!regs) {
+ printk(KERN_ERR "%s: failed to map registers, aborting.\n",
+ __func__);
+ return;
+ }
+
+ fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
+ iounmap(regs);
+ printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
+ (fpga_ver & 0xF000) >> 12,
+ (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
+ if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
+ printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
+ "devices won't be registered!\n");
+ return;
+ }
+
+ /* register FPGA-based devices */
+ qong_init_nand_mtd();
+ qong_init_dnet();
+}
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_init_imx_uart();
+ qong_init_nor_mtd();
+ qong_init_fpga();
+}
+
+static void __init qong_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer qong_timer = {
+ .init = qong_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_QONG data structure.
+ */
+
+MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
+ /* Maintainer: DENX Software Engineering GmbH */
+ .phys_io = MX31_AIPS1_BASE_ADDR,
+ .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &qong_timer,
+MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include "devices.h"
-
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
- */
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*!
- * The serial port definition structure.
- */
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
- .irq = EXPIO_INT_XUART_INTA,
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- }, {
- .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
- .mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
- .irq = EXPIO_INT_XUART_INTB,
- .uartclk = 14745600,
- .regshift = 0,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
- },
- {},
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static int __init mxc_init_extuart(void)
-{
- return platform_device_register(&serial_device);
-}
-#else
-static inline int mxc_init_extuart(void)
-{
- return 0;
-}
-#endif
-
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static unsigned int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-}
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* !SERIAL_IMX */
-
-static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
-{
- u32 imr_val;
- u32 int_valid;
- u32 expio_irq;
-
- imr_val = __raw_readw(PBC_INTMASK_SET_REG);
- int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
-
- expio_irq = MXC_EXP_IO_BASE;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
-
- generic_handle_irq(expio_irq);
- }
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq an expio virtual irq number
- */
-static void expio_mask_irq(u32 irq)
-{
- u32 expio = MXC_IRQ_TO_EXPIO(irq);
- /* mask the interrupt */
- __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
- __raw_readw(PBC_INTMASK_CLEAR_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq an expanded io virtual irq number
- */
-static void expio_ack_irq(u32 irq)
-{
- u32 expio = MXC_IRQ_TO_EXPIO(irq);
- /* clear the interrupt status */
- __raw_writew(1 << expio, PBC_INTSTATUS_REG);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq a expio virtual irq number
- */
-static void expio_unmask_irq(u32 irq)
-{
- u32 expio = MXC_IRQ_TO_EXPIO(irq);
- /* unmask the interrupt */
- __raw_writew(1 << expio, PBC_INTMASK_SET_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .name = "EXPIO(CPLD)",
- .ack = expio_ack_irq,
- .mask = expio_mask_irq,
- .unmask = expio_unmask_irq,
-};
-
-static void __init mx31ads_init_expio(void)
-{
- int i;
-
- printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
-
- /*
- * Configure INT line as GPIO input
- */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
-
- /* disable the interrupt and clear the status */
- __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
- __raw_writew(0xFFFF, PBC_INTSTATUS_REG);
- for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
- i++) {
- set_irq_chip(i, &expio_irq_chip);
- set_irq_handler(i, handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
- set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
- set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
-}
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-/* This section defines setup for the Wolfson Microelectronics
- * 1133-EV1 PMU/audio board. When other PMU boards are supported the
- * regulator definitions may be shared with them, but for now they can
- * only be used with this board so would generate warnings about
- * unused statics and some of the configuration is specific to this
- * module.
- */
-
-/* CPU */
-static struct regulator_consumer_supply sw1a_consumers[] = {
- {
- .supply = "cpu_vcc",
- }
-};
-
-static struct regulator_init_data sw1a_data = {
- .constraints = {
- .name = "SW1A",
- .min_uV = 1275000,
- .max_uV = 1600000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .state_mem = {
- .uV = 1400000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
- .consumer_supplies = sw1a_consumers,
-};
-
-/* System IO - High */
-static struct regulator_init_data viohi_data = {
- .constraints = {
- .name = "VIOHO",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .state_mem = {
- .uV = 2800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* System IO - Low */
-static struct regulator_init_data violo_data = {
- .constraints = {
- .name = "VIOLO",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .initial_state = PM_SUSPEND_MEM,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* DDR RAM */
-static struct regulator_init_data sw2a_data = {
- .constraints = {
- .name = "SW2A",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .state_mem = {
- .uV = 1800000,
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 1,
- },
- .state_disk = {
- .mode = REGULATOR_MODE_NORMAL,
- .enabled = 0,
- },
- .always_on = 1,
- .boot_on = 1,
- .initial_state = PM_SUSPEND_MEM,
- },
-};
-
-static struct regulator_init_data ldo1_data = {
- .constraints = {
- .name = "VCAM/VMMC1/VMMC2",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_consumer_supply ldo2_consumers[] = {
- {
- .supply = "AVDD",
- },
- {
- .supply = "HPVDD",
- },
-};
-
-/* CODEC and SIM */
-static struct regulator_init_data ldo2_data = {
- .constraints = {
- .name = "VESIM/VSIM/AVDD",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
- .consumer_supplies = ldo2_consumers,
-};
-
-/* General */
-static struct regulator_init_data vdig_data = {
- .constraints = {
- .name = "VDIG",
- .min_uV = 1500000,
- .max_uV = 1500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-/* Tranceivers */
-static struct regulator_init_data ldo4_data = {
- .constraints = {
- .name = "VRF1/CVDD_2.775",
- .min_uV = 2500000,
- .max_uV = 2500000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .apply_uV = 1,
- .always_on = 1,
- .boot_on = 1,
- },
-};
-
-static struct wm8350_led_platform_data wm8350_led_data = {
- .name = "wm8350:white",
- .default_trigger = "heartbeat",
- .max_uA = 27899,
-};
-
-static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
- .vmid_discharge_msecs = 1000,
- .drain_msecs = 30,
- .cap_discharge_msecs = 700,
- .vmid_charge_msecs = 700,
- .vmid_s_curve = WM8350_S_CURVE_SLOW,
- .dis_out4 = WM8350_DISCHARGE_SLOW,
- .dis_out3 = WM8350_DISCHARGE_SLOW,
- .dis_out2 = WM8350_DISCHARGE_SLOW,
- .dis_out1 = WM8350_DISCHARGE_SLOW,
- .vroi_out4 = WM8350_TIE_OFF_500R,
- .vroi_out3 = WM8350_TIE_OFF_500R,
- .vroi_out2 = WM8350_TIE_OFF_500R,
- .vroi_out1 = WM8350_TIE_OFF_500R,
- .vroi_enable = 0,
- .codec_current_on = WM8350_CODEC_ISEL_1_0,
- .codec_current_standby = WM8350_CODEC_ISEL_0_5,
- .codec_current_charge = WM8350_CODEC_ISEL_1_5,
-};
-
-static int mx31_wm8350_init(struct wm8350 *wm8350)
-{
- int i;
-
- wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
- WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
- WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_ON);
-
- wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
- WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
- WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
- WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
- WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
- WM8350_GPIO_DEBOUNCE_OFF);
-
- /* Fix up for our own supplies. */
- for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
- ldo2_consumers[i].dev = wm8350->dev;
-
- wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
- wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
- wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
-
- /* LEDs */
- wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
- WM8350_DC5_ERRACT_SHUTDOWN_CONV);
- wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
- WM8350_ISINK_FLASH_DISABLE,
- WM8350_ISINK_FLASH_TRIG_BIT,
- WM8350_ISINK_FLASH_DUR_32MS,
- WM8350_ISINK_FLASH_ON_INSTANT,
- WM8350_ISINK_FLASH_OFF_INSTANT,
- WM8350_ISINK_FLASH_MODE_EN);
- wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
- WM8350_ISINK_MODE_BOOST,
- WM8350_ISINK_ILIM_NORMAL,
- WM8350_DC5_RMP_20V,
- WM8350_DC5_FBSRC_ISINKA);
- wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
- &wm8350_led_data);
-
- wm8350->codec.platform_data = &imx32ads_wm8350_setup;
-
- regulator_has_full_constraints();
-
- return 0;
-}
-
-static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
- .init = mx31_wm8350_init,
- .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
-};
-#endif
-
-#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
-static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
- {
- I2C_BOARD_INFO("wm8350", 0x1a),
- .platform_data = &mx31_wm8350_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
- },
-#endif
-};
-
-static void mxc_init_i2c(void)
-{
- i2c_register_board_info(1, mx31ads_i2c1_devices,
- ARRAY_SIZE(mx31ads_i2c1_devices));
-
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-
- mxc_register_device(&mxc_i2c_device1, NULL);
-}
-#else
-static void mxc_init_i2c(void)
-{
-}
-#endif
-
-/*!
- * This structure defines static mappings for the i.MX31ADS board.
- */
-static struct map_desc mx31ads_io_desc[] __initdata = {
- {
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE / 2,
- .type = MT_DEVICE
- },
-};
-
-/*!
- * Set up static virtual mappings.
- */
-static void __init mx31ads_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
-}
-
-static void __init mx31ads_init_irq(void)
-{
- mx31_init_irq();
- mx31ads_init_expio();
-}
-
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
- mxc_init_extuart();
- mxc_init_imx_uart();
- mxc_init_i2c();
-}
-
-static void __init mx31ads_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31ads_timer = {
- .init = mx31ads_timer_init,
-};
-
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31ADS data structure.
- */
-MACHINE_START(MX31ADS, "Freescale MX31ADS")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31ads_map_io,
- .init_irq = mx31ads_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31ads_timer,
-MACHINE_END
+++ /dev/null
-/*
- * LILLY-1131 module support
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * based on code for other MX31 boards,
- *
- * Copyright 2005-2007 Freescale Semiconductor
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13783.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
-
-#include "devices.h"
-
-/*
- * This file contains module-specific initialization routines for LILLY-1131.
- * Initialization of peripherals found on the baseboard is implemented in the
- * appropriate baseboard support code.
- */
-
-/* SMSC ethernet support */
-
-static struct resource smsc91x_resources[] = {
- {
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0xffff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
- }
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT |
- SMSC911X_SAVE_MAC_ADDRESS |
- SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc91x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc91x_resources),
- .resource = smsc91x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- }
-};
-
-/* NOR flash */
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
-};
-
-static struct resource nor_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = &nor_flash_resource,
- .num_resources = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
- &smsc91x_device,
- &physmap_flash_device,
-};
-
-/* SPI */
-
-static int spi_internal_chipselect[] = {
- MXC_SPI_CS(0),
- MXC_SPI_CS(1),
- MXC_SPI_CS(2),
-};
-
-static struct spi_imx_master spi0_pdata = {
- .chipselect = spi_internal_chipselect,
- .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct spi_imx_master spi1_pdata = {
- .chipselect = spi_internal_chipselect,
- .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13783_platform_data mc13783_pdata __initdata = {
- .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info mc13783_dev __initdata = {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &mc13783_pdata,
-};
-
-static int mx31lilly_baseboard;
-core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
-
-static void __init mx31lilly_board_init(void)
-{
- switch (mx31lilly_baseboard) {
- case MX31LILLY_NOBOARD:
- break;
- case MX31LILLY_DB:
- mx31lilly_db_init();
- break;
- default:
- printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
- mx31lilly_baseboard);
- }
-
- mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-
- /* SPI */
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
-
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
-
- mxc_register_device(&mxc_spi_device0, &spi0_pdata);
- mxc_register_device(&mxc_spi_device1, &spi1_pdata);
- spi_register_board_info(&mc13783_dev, 1);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init mx31lilly_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31lilly_timer = {
- .init = mx31lilly_timer_init,
-};
-
-MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mx31lilly_board_init,
- .timer = &mx31lilly_timer,
-MACHINE_END
-
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
};
/* UART */
static int gpio_det, gpio_wp;
#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+ PAD_CTL_ODE_CMOS)
static int mxc_mmc1_get_ro(struct device *dev)
{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
}
static int mxc_mmc1_init(struct device *dev,
gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+ MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
gpio_direction_input(gpio_wp);
ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
- free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
}
static struct imxmmc_platform_data mmc_pdata = {
+++ /dev/null
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
-#include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
-
-#include "devices.h"
-
-/*
- * This file contains the module-specific initialization routines.
- */
-
-static unsigned int mx31lite_pins[] = {
- /* LAN9117 IRQ pin */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
- /* SPI 1 */
- MX31_PIN_CSPI2_SCLK__SCLK,
- MX31_PIN_CSPI2_MOSI__MOSI,
- MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0,
- MX31_PIN_CSPI2_SS1__SS1,
- MX31_PIN_CSPI2_SS2__SS2,
-};
-
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 0x100,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
- .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-/*
- * SPI
- *
- * The MC13783 is the only hard-wired SPI device on the module.
- */
-
-static int spi_internal_chipselect[] = {
- MXC_SPI_CS(0),
-};
-
-static struct spi_imx_master spi1_pdata = {
- .chipselect = spi_internal_chipselect,
- .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13783_platform_data mc13783_pdata __initdata = {
- .flags = MC13783_USE_RTC |
- MC13783_USE_REGULATOR,
-};
-
-static struct spi_board_info mc13783_spi_dev __initdata = {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &mc13783_pdata,
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-};
-
-/*
- * USB
- */
-
-#if defined(CONFIG_USB_ULPI)
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_USBH2_CLK__USBH2_CLK,
- MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT,
- MX31_PIN_USBH2_STP__USBH2_STP,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
- /* chip select */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
- "USBH2_CS");
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
- return 0;
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
-};
-#endif
-
-/*
- * NOR flash
- */
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
-};
-
-static struct resource nor_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = &nor_flash_resource,
- .num_resources = 1,
-};
-
-
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31lite_io_desc[] __initdata = {
- {
- .virtual = CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS4_BASE_ADDR),
- .length = CS4_SIZE,
- .type = MT_DEVICE
- }
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31lite_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
-}
-
-static int mx31lite_baseboard;
-core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-
-static void __init mxc_board_init(void)
-{
- int ret;
-
- switch (mx31lite_baseboard) {
- case MX31LITE_NOBOARD:
- break;
- case MX31LITE_DB:
- mx31lite_db_init();
- break;
- default:
- printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
- mx31lite_baseboard);
- }
-
- mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
- "mx31lite");
-
- /* NOR and NAND flash */
- platform_device_register(&physmap_flash_device);
- mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
-
- mxc_register_device(&mxc_spi_device1, &spi1_pdata);
- spi_register_board_info(&mc13783_spi_dev, 1);
-
-#if defined(CONFIG_USB_ULPI)
- /* USB */
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-#endif
-
- /* SMSC9117 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
- if (ret)
- pr_warning("could not get LAN irq gpio\n");
- else {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- platform_device_register(&smsc911x_device);
- }
-}
-
-static void __init mx31lite_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31lite_timer = {
- .init = mx31lite_timer_init,
-};
-
-MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31lite_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31lite_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/fsl_devices.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/i2c.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
-#include <mach/mx3_camera.h>
-#include <mach/spi.h>
-#include <mach/ulpi.h>
-
-#include "devices.h"
-
-static unsigned int moboard_pins[] = {
- /* UART0 */
- MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
- MX31_PIN_CTS1__GPIO2_7,
- /* UART4 */
- MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
- /* I2C0 */
- MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
- /* I2C1 */
- MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
- MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
- /* USB reset */
- MX31_PIN_GPIO1_0__GPIO1_0,
- /* USB OTG */
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
- MX31_PIN_USB_OC__GPIO1_30,
- /* USB H2 */
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
- MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
- MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
- MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
- MX31_PIN_SCK6__GPIO1_25,
- /* LEDs */
- MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
- MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
- /* SEL */
- MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
- MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
- /* SPI1 */
- MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
- /* Atlas IRQ */
- MX31_PIN_GPIO1_3__GPIO1_3,
- /* SPI2 */
- MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
- MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS1__CSPI3_SS1,
-};
-
-static struct physmap_flash_data mx31moboard_flash_data = {
- .width = 2,
-};
-
-static struct resource mx31moboard_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx31moboard_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &mx31moboard_flash_data,
- },
- .resource = &mx31moboard_flash_resource,
- .num_resources = 1,
-};
-
-static int moboard_uart0_init(struct platform_device *pdev)
-{
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
- return 0;
-}
-
-static struct imxuart_platform_data uart0_pdata = {
- .init = moboard_uart0_init,
-};
-
-static struct imxuart_platform_data uart4_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
- .bitrate = 400000,
-};
-
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
- .bitrate = 100000,
-};
-
-static int moboard_spi1_cs[] = {
- MXC_SPI_CS(0),
- MXC_SPI_CS(2),
-};
-
-static struct spi_imx_master moboard_spi1_master = {
- .chipselect = moboard_spi1_cs,
- .num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
-};
-
-static struct regulator_consumer_supply sdhc_consumers[] = {
- {
- .dev = &mxcsdhc_device0.dev,
- .supply = "sdhc0_vcc",
- },
- {
- .dev = &mxcsdhc_device1.dev,
- .supply = "sdhc1_vcc",
- },
-};
-
-static struct regulator_init_data sdhc_vreg_data = {
- .constraints = {
- .min_uV = 2700000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
- .consumer_supplies = sdhc_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
- {
- .dev = &mx3_camera.dev,
- .supply = "cam_vcc",
- },
-};
-
-static struct regulator_init_data cam_vreg_data = {
- .constraints = {
- .min_uV = 2700000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_FAST,
- .always_on = 0,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
- .consumer_supplies = cam_consumers,
-};
-
-static struct mc13783_regulator_init_data moboard_regulators[] = {
- {
- .id = MC13783_REGU_VMMC1,
- .init_data = &sdhc_vreg_data,
- },
- {
- .id = MC13783_REGU_VCAM,
- .init_data = &cam_vreg_data,
- },
-};
-
-static struct mc13783_platform_data moboard_pmic = {
- .regulators = moboard_regulators,
- .num_regulators = ARRAY_SIZE(moboard_regulators),
- .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
- MC13783_USE_ADC,
-};
-
-static struct spi_board_info moboard_spi_board_info[] __initdata = {
- {
- .modalias = "mc13783",
- .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
- .max_speed_hz = 300000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &moboard_pmic,
- .mode = SPI_CS_HIGH,
- },
-};
-
-static int moboard_spi2_cs[] = {
- MXC_SPI_CS(1),
-};
-
-static struct spi_imx_master moboard_spi2_master = {
- .chipselect = moboard_spi2_cs,
- .num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
-};
-
-#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
-#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
-
-static int moboard_sdhc1_get_ro(struct device *dev)
-{
- return !gpio_get_value(SDHC1_WP);
-}
-
-static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC1_CD, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC1_CD);
-
- ret = gpio_request(SDHC1_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC1_WP);
-
- ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "sdhc1-card-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
- gpio_free(SDHC1_WP);
-err_gpio_free:
- gpio_free(SDHC1_CD);
-
- return ret;
-}
-
-static void moboard_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(SDHC1_CD), data);
- gpio_free(SDHC1_WP);
- gpio_free(SDHC1_CD);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
- .get_ro = moboard_sdhc1_get_ro,
- .init = moboard_sdhc1_init,
- .exit = moboard_sdhc1_exit,
-};
-
-/*
- * this pin is dedicated for all mx31moboard systems, so we do it here
- */
-#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-
-static void usb_xcvr_reset(void)
-{
- gpio_request(USB_RESET_B, "usb-reset");
- gpio_direction_output(USB_RESET_B, 0);
- mdelay(1);
- gpio_set_value(USB_RESET_B, 1);
-}
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void moboard_usbotg_init(void)
-{
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
- gpio_request(OTG_EN_B, "usb-udc-en");
- gpio_direction_output(OTG_EN_B, 0);
-}
-
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
-#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int moboard_usbh2_hw_init(struct platform_device *pdev)
-{
- int ret = gpio_request(USBH2_EN_B, "usbh2-en");
- if (ret)
- return ret;
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- gpio_direction_output(USBH2_EN_B, 0);
-
- return 0;
-}
-
-static int moboard_usbh2_hw_exit(struct platform_device *pdev)
-{
- gpio_free(USBH2_EN_B);
- return 0;
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata = {
- .init = moboard_usbh2_hw_init,
- .exit = moboard_usbh2_hw_exit,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
-};
-
-static int __init moboard_usbh2_init(void)
-{
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
- return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-}
-#else
-static inline int moboard_usbh2_init(void) { return 0; }
-#endif
-
-
-static struct gpio_led mx31moboard_leds[] = {
- {
- .name = "coreboard-led-0:red:running",
- .default_trigger = "heartbeat",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
- }, {
- .name = "coreboard-led-1:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
- }, {
- .name = "coreboard-led-2:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
- }, {
- .name = "coreboard-led-3:red",
- .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
- },
-};
-
-static struct gpio_led_platform_data mx31moboard_led_pdata = {
- .num_leds = ARRAY_SIZE(mx31moboard_leds),
- .leds = mx31moboard_leds,
-};
-
-static struct platform_device mx31moboard_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &mx31moboard_led_pdata,
- },
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void mx31moboard_init_sel_gpios(void)
-{
- if (!gpio_request(SEL0, "sel0")) {
- gpio_direction_input(SEL0);
- gpio_export(SEL0, true);
- }
-
- if (!gpio_request(SEL1, "sel1")) {
- gpio_direction_input(SEL1);
- gpio_export(SEL1, true);
- }
-
- if (!gpio_request(SEL2, "sel2")) {
- gpio_direction_input(SEL2);
- gpio_export(SEL2, true);
- }
-
- if (!gpio_request(SEL3, "sel3")) {
- gpio_direction_input(SEL3);
- gpio_export(SEL3, true);
- }
-}
-
-static struct ipu_platform_data mx3_ipu_data = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct platform_device *devices[] __initdata = {
- &mx31moboard_flash,
- &mx31moboard_leds_device,
-};
-
-static struct mx3_camera_pdata camera_pdata = {
- .dma_dev = &mx3_ipu.dev,
- .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
- .mclk_10khz = 4800,
-};
-
-#define CAMERA_BUF_SIZE (4*1024*1024)
-
-static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
-{
- dma_addr_t dma_handle;
- void *buf;
- int dma;
-
- if (buf_size < 2 * 1024 * 1024)
- return -EINVAL;
-
- buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
- if (!buf) {
- pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
- return -ENOMEM;
- }
-
- memset(buf, 0, buf_size);
-
- dma = dma_declare_coherent_memory(&mx3_camera.dev,
- dma_handle, dma_handle, buf_size,
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
- /* The way we call dma_declare_coherent_memory only a malloc can fail */
- return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
-}
-
-static int mx31moboard_baseboard;
-core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
- mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
- "moboard");
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- mxc_register_device(&mxc_uart_device0, &uart0_pdata);
-
- mxc_register_device(&mxc_uart_device4, &uart4_pdata);
-
- mx31moboard_init_sel_gpios();
-
- mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
- mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
-
- mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
- mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
-
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(moboard_spi_board_info,
- ARRAY_SIZE(moboard_spi_board_info));
-
- mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
-
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
- mxc_register_device(&mx3_camera, &camera_pdata);
-
- usb_xcvr_reset();
-
- moboard_usbotg_init();
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
- moboard_usbh2_init();
-
- switch (mx31moboard_baseboard) {
- case MX31NOBOARD:
- break;
- case MX31DEVBOARD:
- mx31moboard_devboard_init();
- break;
- case MX31MARXBOT:
- mx31moboard_marxbot_init();
- break;
- default:
- printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
- mx31moboard_baseboard);
- }
-}
-
-static void __init mx31moboard_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31moboard_timer = {
- .init = mx31moboard_timer_init,
-};
-
-MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
- /* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31moboard_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/board-mx31pdk.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include "devices.h"
-
-/*!
- * @file mx31pdk.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
- */
-
-static int mx31pdk_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Support for the SMSC9217 on the Debug board.
- */
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = LAN9217_BASE_ADDR,
- .end = LAN9217_BASE_ADDR + 0xff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = EXPIO_INT_ENET,
- .end = EXPIO_INT_ENET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-/*
- * Routines for the CPLD on the debug board. It contains a CPLD handling
- * LEDs, switches, interrupts for Ethernet.
- */
-
-static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
-{
- uint32_t imr_val;
- uint32_t int_valid;
- uint32_t expio_irq;
-
- imr_val = __raw_readw(CPLD_INT_MASK_REG);
- int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
-
- expio_irq = MXC_EXP_IO_BASE;
- for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
- if ((int_valid & 1) == 0)
- continue;
- generic_handle_irq(expio_irq);
- }
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq an expio virtual irq number
- */
-static void expio_mask_irq(uint32_t irq)
-{
- uint16_t reg;
- uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
- /* mask the interrupt */
- reg = __raw_readw(CPLD_INT_MASK_REG);
- reg |= 1 << expio;
- __raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq an expanded io virtual irq number
- */
-static void expio_ack_irq(uint32_t irq)
-{
- uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
- /* clear the interrupt status */
- __raw_writew(1 << expio, CPLD_INT_RESET_REG);
- __raw_writew(0, CPLD_INT_RESET_REG);
- /* mask the interrupt */
- expio_mask_irq(irq);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq a expio virtual irq number
- */
-static void expio_unmask_irq(uint32_t irq)
-{
- uint16_t reg;
- uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
- /* unmask the interrupt */
- reg = __raw_readw(CPLD_INT_MASK_REG);
- reg &= ~(1 << expio);
- __raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
- .ack = expio_ack_irq,
- .mask = expio_mask_irq,
- .unmask = expio_unmask_irq,
-};
-
-static int __init mx31pdk_init_expio(void)
-{
- int i;
- int ret;
-
- /* Check if there's a debug board connected */
- if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
- (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
- (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
- /* No Debug board found */
- return -ENODEV;
- }
-
- pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
- __raw_readw(CPLD_CODE_VER_REG));
-
- /*
- * Configure INT line as GPIO input
- */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
- if (ret)
- pr_warning("could not get LAN irq gpio\n");
- else
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
- /* Disable the interrupts and clear the status */
- __raw_writew(0, CPLD_INT_MASK_REG);
- __raw_writew(0xFFFF, CPLD_INT_RESET_REG);
- __raw_writew(0, CPLD_INT_RESET_REG);
- __raw_writew(0x1F, CPLD_INT_MASK_REG);
- for (i = MXC_EXP_IO_BASE;
- i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
- i++) {
- set_irq_chip(i, &expio_irq_chip);
- set_irq_handler(i, handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
- set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
- set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
-
- return 0;
-}
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
- {
- .virtual = CS5_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(CS5_BASE_ADDR),
- .length = CS5_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init mx31pdk_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
-}
-
-/*!
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
- mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
- "mx31pdk");
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- if (!mx31pdk_init_expio())
- platform_device_register(&smsc911x_device);
-}
-
-static void __init mx31pdk_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31pdk_timer = {
- .init = mx31pdk_timer_init,
-};
-
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31PDK data structure.
- */
-MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31pdk_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31pdk_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx35.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
- &mxc_fec_device,
-};
-
-static struct pad_desc mx35pdk_pads[] = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* USBOTG */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-};
-
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
-}
-
-static void __init mx35pdk_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-struct sys_timer mx35pdk_timer = {
- .init = mx35pdk_timer_init,
-};
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
- /* Maintainer: Freescale Semiconductor, Inc */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx35_map_io,
- .init_irq = mx35_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx35pdk_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/fsl_devices.h>
-#include <linux/can/platform/sja1000.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mmc.h>
-#include <mach/mx3_camera.h>
-#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-#include "pcm037.h"
-
-static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
-
-static int __init pcm037_variant_setup(char *str)
-{
- if (!strcmp("eet", str))
- pcm037_instance = PCM037_EET;
- else if (strcmp("pcm970", str))
- pr_warning("Unknown pcm037 baseboard variant %s\n", str);
-
- return 1;
-}
-
-/* Supported values: "pcm970" (default) and "eet" */
-__setup("pcm037_variant=", pcm037_variant_setup);
-
-enum pcm037_board_variant pcm037_variant(void)
-{
- return pcm037_instance;
-}
-
-/* UART1 with RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_handshake_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
-};
-
-/* UART1 without RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_pins[] = {
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
-};
-
-static unsigned int pcm037_pins[] = {
- /* I2C */
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
- MX31_PIN_CSPI2_SS2__I2C3_SDA,
- MX31_PIN_CSPI2_SCLK__I2C3_SCL,
- /* SDHC1 */
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
- IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
- /* SPI1 */
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
- /* UART2 */
- MX31_PIN_TXD2__TXD2,
- MX31_PIN_RXD2__RXD2,
- MX31_PIN_CTS2__CTS2,
- MX31_PIN_RTS2__RTS2,
- /* UART3 */
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3,
- MX31_PIN_CSPI3_SCLK__RTS3,
- MX31_PIN_CSPI3_SPI_RDY__CTS3,
- /* LAN9217 irq pin */
- IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- /* Onewire */
- MX31_PIN_BATT_LINE__OWIRE,
- /* Framebuffer */
- MX31_PIN_LD0__LD0,
- MX31_PIN_LD1__LD1,
- MX31_PIN_LD2__LD2,
- MX31_PIN_LD3__LD3,
- MX31_PIN_LD4__LD4,
- MX31_PIN_LD5__LD5,
- MX31_PIN_LD6__LD6,
- MX31_PIN_LD7__LD7,
- MX31_PIN_LD8__LD8,
- MX31_PIN_LD9__LD9,
- MX31_PIN_LD10__LD10,
- MX31_PIN_LD11__LD11,
- MX31_PIN_LD12__LD12,
- MX31_PIN_LD13__LD13,
- MX31_PIN_LD14__LD14,
- MX31_PIN_LD15__LD15,
- MX31_PIN_LD16__LD16,
- MX31_PIN_LD17__LD17,
- MX31_PIN_VSYNC3__VSYNC3,
- MX31_PIN_HSYNC__HSYNC,
- MX31_PIN_FPSHIFT__FPSHIFT,
- MX31_PIN_DRDY0__DRDY0,
- MX31_PIN_D3_REV__D3_REV,
- MX31_PIN_CONTRAST__CONTRAST,
- MX31_PIN_D3_SPL__D3_SPL,
- MX31_PIN_D3_CLS__D3_CLS,
- MX31_PIN_LCS0__GPI03_23,
- /* CSI */
- IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
- MX31_PIN_CSI_D6__CSI_D6,
- MX31_PIN_CSI_D7__CSI_D7,
- MX31_PIN_CSI_D8__CSI_D8,
- MX31_PIN_CSI_D9__CSI_D9,
- MX31_PIN_CSI_D10__CSI_D10,
- MX31_PIN_CSI_D11__CSI_D11,
- MX31_PIN_CSI_D12__CSI_D12,
- MX31_PIN_CSI_D13__CSI_D13,
- MX31_PIN_CSI_D14__CSI_D14,
- MX31_PIN_CSI_D15__CSI_D15,
- MX31_PIN_CSI_HSYNC__CSI_HSYNC,
- MX31_PIN_CSI_MCLK__CSI_MCLK,
- MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
- MX31_PIN_CSI_VSYNC__CSI_VSYNC,
- /* GPIO */
- IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm037_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
- MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
- MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
- MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
- MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
- MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
- MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
- MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
- MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
- MX31_PIN_USBOTG_CLK__USBOTG_CLK,
- MX31_PIN_USBOTG_DIR__USBOTG_DIR,
- MX31_PIN_USBOTG_NXT__USBOTG_NXT,
- MX31_PIN_USBOTG_STP__USBOTG_STP,
-};
-
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
- int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
- ARRAY_SIZE(usbotg_pins), "usbotg");
-
- if (ret < 0) {
- printk(KERN_ERR "Cannot set up OTG pins\n");
- return ret;
- }
-
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
- mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
- return 0;
-}
-
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_ULPI,
-};
-
-static struct platform_device pcm037_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm037_flash_data,
- },
- .resource = &pcm037_flash_resource,
- .num_resources = 1,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = CS1_BASE_ADDR + 0x300,
- .end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
- .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
- SMSC911X_SAVE_MAC_ADDRESS,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device pcm037_eth = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-static struct platdata_mtd_ram pcm038_sram_data = {
- .bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
- .start = CS4_BASE_ADDR,
- .end = CS4_BASE_ADDR + 512 * 1024 - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_sram_device = {
- .name = "mtd-ram",
- .id = 0,
- .dev = {
- .platform_data = &pcm038_sram_data,
- },
- .num_resources = 1,
- .resource = &pcm038_sram_resource,
-};
-
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
- .bitrate = 100000,
-};
-
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
- .bitrate = 20000,
-};
-
-static struct at24_platform_data board_eeprom = {
- .byte_len = 4096,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static int pcm037_camera_power(struct device *dev, int on)
-{
- /* disable or enable the camera in X7 or X8 PCM970 connector */
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
- return 0;
-}
-
-static struct i2c_board_info pcm037_i2c_camera[] = {
- {
- I2C_BOARD_INFO("mt9t031", 0x5d),
- }, {
- I2C_BOARD_INFO("mt9v022", 0x48),
- },
-};
-
-static struct soc_camera_link iclink_mt9v022 = {
- .bus_id = 0, /* Must match with the camera ID */
- .board_info = &pcm037_i2c_camera[1],
- .i2c_adapter_id = 2,
- .module_name = "mt9v022",
-};
-
-static struct soc_camera_link iclink_mt9t031 = {
- .bus_id = 0, /* Must match with the camera ID */
- .power = pcm037_camera_power,
- .board_info = &pcm037_i2c_camera[0],
- .i2c_adapter_id = 2,
- .module_name = "mt9t031",
-};
-
-static struct i2c_board_info pcm037_i2c_devices[] = {
- {
- I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
- .platform_data = &board_eeprom,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }
-};
-
-static struct platform_device pcm037_mt9t031 = {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .platform_data = &iclink_mt9t031,
- },
-};
-
-static struct platform_device pcm037_mt9v022 = {
- .name = "soc-camera-pdrv",
- .id = 1,
- .dev = {
- .platform_data = &iclink_mt9v022,
- },
-};
-
-/* Not connected by default */
-#ifdef PCM970_SDHC_RW_SWITCH
-static int pcm970_sdhc1_get_ro(struct device *dev)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-}
-#endif
-
-#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
-#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
- void *data)
-{
- int ret;
-
- ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
- if (ret)
- return ret;
-
- gpio_direction_input(SDHC1_GPIO_DET);
-
-#ifdef PCM970_SDHC_RW_SWITCH
- ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
- if (ret)
- goto err_gpio_free;
- gpio_direction_input(SDHC1_GPIO_WP);
-#endif
-
- ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "sdhc-detect", data);
- if (ret)
- goto err_gpio_free_2;
-
- return 0;
-
-err_gpio_free_2:
-#ifdef PCM970_SDHC_RW_SWITCH
- gpio_free(SDHC1_GPIO_WP);
-err_gpio_free:
-#endif
- gpio_free(SDHC1_GPIO_DET);
-
- return ret;
-}
-
-static void pcm970_sdhc1_exit(struct device *dev, void *data)
-{
- free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
- gpio_free(SDHC1_GPIO_DET);
- gpio_free(SDHC1_GPIO_WP);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
-#ifdef PCM970_SDHC_RW_SWITCH
- .get_ro = pcm970_sdhc1_get_ro,
-#endif
- .init = pcm970_sdhc1_init,
- .exit = pcm970_sdhc1_exit,
-};
-
-struct mx3_camera_pdata camera_pdata = {
- .dma_dev = &mx3_ipu.dev,
- .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
- .mclk_10khz = 2000,
-};
-
-static int __init pcm037_camera_alloc_dma(const size_t buf_size)
-{
- dma_addr_t dma_handle;
- void *buf;
- int dma;
-
- if (buf_size < 2 * 1024 * 1024)
- return -EINVAL;
-
- buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
- if (!buf) {
- pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
- return -ENOMEM;
- }
-
- memset(buf, 0, buf_size);
-
- dma = dma_declare_coherent_memory(&mx3_camera.dev,
- dma_handle, dma_handle, buf_size,
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
- /* The way we call dma_declare_coherent_memory only a malloc can fail */
- return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
-}
-
-static struct platform_device *devices[] __initdata = {
- &pcm037_flash,
- &pcm037_sram_device,
- &pcm037_mt9t031,
- &pcm037_mt9v022,
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz Sharp */
- .name = "Sharp-LQ035Q7DH06-QVGA",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
- FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "CMEL-OLED",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
- .name = "Sharp-LQ035Q7DH06-QVGA",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct resource pcm970_sja1000_resources[] = {
- {
- .start = CS5_BASE_ADDR,
- .end = CS5_BASE_ADDR + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
- .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
- },
-};
-
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
- .clock = 16000000 / 2,
- .ocr = 0x40 | 0x18,
- .cdr = 0x40,
-};
-
-static struct platform_device pcm970_sja1000 = {
- .name = "sja1000_platform",
- .dev = {
- .platform_data = &pcm970_sja1000_platform_data,
- },
- .resource = pcm970_sja1000_resources,
- .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
- int ret;
-
- mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
- "pcm037");
-
- if (pcm037_variant() == PCM037_EET)
- mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
- ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
- else
- mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
- ARRAY_SIZE(pcm037_uart1_handshake_pins),
- "pcm037_uart1");
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
-
- mxc_register_device(&mxc_w1_master_device, NULL);
-
- /* LAN9217 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
- if (ret)
- pr_warning("could not get LAN irq gpio\n");
- else {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
- platform_device_register(&pcm037_eth);
- }
-
-
- /* I2C adapters and devices */
- i2c_register_board_info(1, pcm037_i2c_devices,
- ARRAY_SIZE(pcm037_i2c_devices));
-
- mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
- mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
-
- mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
- mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
- if (!gpio_usbotg_hs_activate())
- mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
-
- /* CSI */
- /* Camera power: default - off */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
- if (!ret)
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
- else
- iclink_mt9t031.power = NULL;
-
- if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
- mxc_register_device(&mx3_camera, &camera_pdata);
-
- platform_device_register(&pcm970_sja1000);
-}
-
-static void __init pcm037_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-struct sys_timer pcm037_timer = {
- .init = pcm037_timer_init,
-};
-
-MACHINE_START(PCM037, "Phytec Phycore pcm037")
- /* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &pcm037_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <mach/common.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/iomux-mx3.h>
-
-#include <asm/mach-types.h>
-
-#include "pcm037.h"
-#include "devices.h"
-
-static unsigned int pcm037_eet_pins[] = {
- /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
- IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
- /* GPIO keys */
- IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
- IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
- IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
- IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
- IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
- IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
- IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
- IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
- IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
- IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
- IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
- IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
- IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
- IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
-
- /* LEDs */
- IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
- IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
- IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
- IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
-};
-
-/* SPI */
-static struct spi_board_info pcm037_spi_dev[] = {
- {
- .modalias = "dac124s085",
- .max_speed_hz = 400000,
- .bus_num = 0,
- .chip_select = 0, /* Index in pcm037_spi1_cs[] */
- .mode = SPI_CPHA,
- },
-};
-
-/* Platform Data for MXC CSPI */
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
-
-struct spi_imx_master pcm037_spi1_master = {
- .chipselect = pcm037_spi1_cs,
- .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
-};
-#endif
-
-/* GPIO-keys input device */
-static struct gpio_keys_button pcm037_gpio_keys[] = {
- {
- .type = EV_KEY,
- .code = KEY_L,
- .gpio = 0,
- .desc = "Wheel Manual",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_A,
- .gpio = 1,
- .desc = "Wheel AF",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_V,
- .gpio = 2,
- .desc = "Wheel View",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_M,
- .gpio = 3,
- .desc = "Wheel Menu",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_UP,
- .gpio = 32,
- .desc = "Nav Pad Up",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_RIGHT,
- .gpio = 33,
- .desc = "Nav Pad Right",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_DOWN,
- .gpio = 34,
- .desc = "Nav Pad Down",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_LEFT,
- .gpio = 35,
- .desc = "Nav Pad Left",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_ENTER,
- .gpio = 38,
- .desc = "Nav Pad Ok",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = KEY_O,
- .gpio = 39,
- .desc = "Wheel Off",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_FORWARD,
- .gpio = 50,
- .desc = "Focus Forward",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_BACK,
- .gpio = 51,
- .desc = "Focus Backward",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_MIDDLE,
- .gpio = 52,
- .desc = "Release Half",
- .wakeup = 0,
- }, {
- .type = EV_KEY,
- .code = BTN_EXTRA,
- .gpio = 53,
- .desc = "Release Full",
- .wakeup = 0,
- },
-};
-
-static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
- .buttons = pcm037_gpio_keys,
- .nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
- .rep = 0, /* No auto-repeat */
-};
-
-static struct platform_device pcm037_gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &pcm037_gpio_keys_platform_data,
- },
-};
-
-static int eet_init_devices(void)
-{
- if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
- return 0;
-
- mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
- ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
-
- /* SPI */
- spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
- mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
-#endif
-
- platform_device_register(&pcm037_gpio_keys_device);
-
- return 0;
-}
-
-late_initcall(eet_init_devices);
+++ /dev/null
-/*
- * Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
-#include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 240x320 @ 60 Hz */
- .name = "Sharp-LQ035Q7",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 185925,
- .left_margin = 9,
- .right_margin = 16,
- .upper_margin = 7,
- .lower_margin = 9,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 240x320 @ 60 Hz */
- .name = "TX090",
- .refresh = 60,
- .xres = 240,
- .yres = 320,
- .pixclock = 38255,
- .left_margin = 144,
- .right_margin = 0,
- .upper_margin = 7,
- .lower_margin = 40,
- .hsync_len = 96,
- .vsync_len = 1,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- },
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
- .irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
- .dma_dev = &mx3_ipu.dev,
- .name = "Sharp-LQ035Q7",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
- .width = 2,
-};
-
-static struct resource pcm043_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pcm043_flash_data,
- },
- .resource = &pcm043_flash_resource,
- .num_resources = 1,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
- .bitrate = 50000,
-};
-
-static struct at24_platform_data board_eeprom = {
- .byte_len = 4096,
- .page_size = 32,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
- {
- I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
- .platform_data = &board_eeprom,
- }, {
- I2C_BOARD_INFO("pcf8563", 0x51),
- }
-};
-#endif
-
-static struct platform_device *devices[] __initdata = {
- &pcm043_flash,
- &mxc_fec_device,
-};
-
-static struct pad_desc pcm043_pads[] = {
- /* UART1 */
- MX35_PAD_CTS1__UART1_CTS,
- MX35_PAD_RTS1__UART1_RTS,
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* UART2 */
- MX35_PAD_CTS2__UART2_CTS,
- MX35_PAD_RTS2__UART2_RTS,
- MX35_PAD_TXD2__UART2_TXD_MUX,
- MX35_PAD_RXD2__UART2_RXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* I2C1 */
- MX35_PAD_I2C1_CLK__I2C1_SCL,
- MX35_PAD_I2C1_DAT__I2C1_SDA,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
- MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
- MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
- /* gpio */
- MX35_PAD_ATA_CS0__GPIO2_6,
-};
-
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
- i2c_register_board_info(0, pcm043_i2c_devices,
- ARRAY_SIZE(pcm043_i2c_devices));
-
- mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
-#endif
-
- mxc_register_device(&mx3_ipu, &mx3_ipu_data);
- mxc_register_device(&mx3_fb, &mx3fb_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-struct sys_timer pcm043_timer = {
- .init = pcm043_timer_init,
-};
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
- /* Maintainer: Pengutronix */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx35_map_io,
- .init_irq = mx35_init_irq,
- .init_machine = mxc_board_init,
- .timer = &pcm043_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx3.h>
-#include "devices.h"
-
-/* FPGA defines */
-#define QONG_FPGA_VERSION(major, minor, rev) \
- (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-
-#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE (1 << 24)
-
-#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 0x10
-/* FPGA control registers */
-#define QONG_FPGA_CTRL_VERSION 0x00
-
-#define QONG_DNET_ID 1
-#define QONG_DNET_BASEADDR \
- (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 0x00001000
-
-#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
-
-/*
- * This file contains the board-specific initialization routines.
- */
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
- "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-}
-
-static struct resource dnet_resources[] = {
- {
- .name = "dnet-memory",
- .start = QONG_DNET_BASEADDR,
- .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = QONG_FPGA_IRQ,
- .end = QONG_FPGA_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device dnet_device = {
- .name = "dnet",
- .id = -1,
- .num_resources = ARRAY_SIZE(dnet_resources),
- .resource = dnet_resources,
-};
-
-static int __init qong_init_dnet(void)
-{
- int ret;
-
- ret = platform_device_register(&dnet_device);
- return ret;
-}
-
-/* MTD NOR flash */
-
-static struct physmap_flash_data qong_flash_data = {
- .width = 2,
-};
-
-static struct resource qong_flash_resource = {
- .start = CS0_BASE_ADDR,
- .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nor_mtd_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &qong_flash_data,
- },
- .resource = &qong_flash_resource,
- .num_resources = 1,
-};
-
-static void qong_init_nor_mtd(void)
-{
- (void)platform_device_register(&qong_nor_mtd_device);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *nand_chip = mtd->priv;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- if (ctrl & NAND_CLE)
- writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
- else
- writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int qong_nand_device_ready(struct mtd_info *mtd)
-{
- return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-}
-
-static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
-{
- if (chip >= 0)
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
- else
- gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
-}
-
-static struct platform_nand_data qong_nand_data = {
- .chip = {
- .chip_delay = 20,
- .options = 0,
- },
- .ctrl = {
- .cmd_ctrl = qong_nand_cmd_ctrl,
- .dev_ready = qong_nand_device_ready,
- .select_chip = qong_nand_select_chip,
- }
-};
-
-static struct resource qong_nand_resource = {
- .start = CS3_BASE_ADDR,
- .end = CS3_BASE_ADDR + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nand_device = {
- .name = "gen_nand",
- .id = -1,
- .dev = {
- .platform_data = &qong_nand_data,
- },
- .num_resources = 1,
- .resource = &qong_nand_resource,
-};
-
-static void __init qong_init_nand_mtd(void)
-{
- /* init CS */
- __raw_writel(0x00004f00, CSCR_U(3));
- __raw_writel(0x20013b31, CSCR_L(3));
- __raw_writel(0x00020800, CSCR_A(3));
- mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
-
- /* enable pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-
- /* ready/busy pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-
- /* write protect pin */
- mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
- if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
-
- platform_device_register(&qong_nand_device);
-}
-
-static void __init qong_init_fpga(void)
-{
- void __iomem *regs;
- u32 fpga_ver;
-
- regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
- if (!regs) {
- printk(KERN_ERR "%s: failed to map registers, aborting.\n",
- __func__);
- return;
- }
-
- fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
- iounmap(regs);
- printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
- (fpga_ver & 0xF000) >> 12,
- (fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
- if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
- printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
- "devices won't be registered!\n");
- return;
- }
-
- /* register FPGA-based devices */
- qong_init_nand_mtd();
- qong_init_dnet();
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
- mxc_init_imx_uart();
- qong_init_nor_mtd();
- qong_init_fpga();
-}
-
-static void __init qong_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-static struct sys_timer qong_timer = {
- .init = qong_timer_init,
-};
-
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_QONG data structure.
- */
-
-MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
- /* Maintainer: DENX Software Engineering GmbH */
- .phys_io = AIPS1_BASE_ADDR,
- .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
- .boot_params = PHYS_OFFSET + 0x100,
- .map_io = mx31_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &qong_timer,
-MACHINE_END
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+CFLAGS_iomux-mx1-mx2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_dma-mx1-mx2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+CFLAGS_audmux-v1.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+CFLAGS_audmux-v2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
unsigned int v;
if (cpu_is_mx31()) {
- v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+ v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
break;
}
- writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+ writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
/*
* KZM-ARM11-01 Board Control Registers on FPGA
*/
-#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003)
+#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
/*
* External UART for touch panel on FPGA
*/
-#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050)
+#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
#include <mach/hardware.h>
/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR)
+#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
/* Offsets for the PBC Controller register */
/* PBC Board status register offset */
* published by the Free Software Foundation.
*
*/
+#define IMX_NEEDS_DEPRECATED_SYMBOLS
#ifdef CONFIG_ARCH_MX1
#include <mach/mx1.h>
#include <asm/sizes.h>
+#define IMX_IO_ADDRESS(addr, module) \
+ ((void __force __iomem *) \
+ (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
+ (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+
#ifdef CONFIG_ARCH_MX3
#include <mach/mx3x.h>
#include <mach/mx31.h>
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_MXC_MX1_H__
-#define __ASM_ARCH_MXC_MX1_H__
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
#include <mach/vmalloc.h>
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
-#endif /* __ASM_ARCH_MXC_MX1_H__ */
+#endif /* ifndef __MACH_MX1_H__ */
* MA 02110-1301, USA.
*/
-#ifndef __ASM_ARCH_MXC_MX21_H__
-#define __ASM_ARCH_MXC_MX21_H__
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
#define MX21_AIPI_BASE_ADDR 0x10000000
#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000
#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
+#define MX21_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX21_AIPI) ?: \
+ IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \
+ IMX_IO_ADDRESS(x, MX21_X_MEMC))
+
/* fixed interrupt numbers */
#define MX21_INT_CSPI3 6
#define MX21_INT_GPIO 8
#define MX21_DMA_REQ_CSI_STAT 30
#define MX21_DMA_REQ_CSI_RX 31
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
+#endif
-#endif /* __ASM_ARCH_MXC_MX21_H__ */
+#endif /* ifndef __MACH_MX21_H__ */
#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
-#define MX25_AIPS1_IO_ADDRESS(x) \
- (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-#define MX25_AIPS2_IO_ADDRESS(x) \
- (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
-#define MX25_AVIC_IO_ADDRESS(x) \
- (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
-
-#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
-
-#define MX25_IO_ADDRESS(x) \
- (void __force __iomem *) \
- (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \
- __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \
- __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \
- 0xDEADBEEF)
+#define MX25_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \
+ IMX_IO_ADDRESS(x, MX25_AVIC))
#define UART1_BASE_ADDR 0x43f90000
#define UART2_BASE_ADDR 0x43f94000
#define MX25_FEC_BASE_ADDR 0x50038000
+#define MX25_NFC_BASE_ADDR 0xbb000000
#define MX25_INT_FEC 57
+#define MX25_INT_NANDFC 33
-#endif /* __MACH_MX25_H__ */
+#endif /* ifndef __MACH_MX25_H__ */
* MA 02110-1301, USA.
*/
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000
#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
/* IRAM */
#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
+#define MX27_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX27_AIPI) ?: \
+ IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \
+ IMX_IO_ADDRESS(x, MX27_X_MEMC))
+
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+ unsigned upper, unsigned lower, unsigned addional)
+{
+ __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+ __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+ __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
/* fixed interrupt numbers */
#define MX27_INT_I2C2 1
#define MX27_INT_GPT6 2
extern int mx27_revision(void);
#endif
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
#define DMA_REQ_NFC MX27_DMA_REQ_NFC
+#endif
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
+#endif /* ifndef __MACH_MX27_H__ */
* MA 02110-1301, USA.
*/
-#ifndef __ASM_ARCH_MXC_MX2x_H__
-#define __ASM_ARCH_MXC_MX2x_H__
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
/* The following addresses are common between i.MX21 and i.MX27 */
#define MX2x_DMA_REQ_CSI_STAT 30
#define MX2x_DMA_REQ_CSI_RX 31
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
+#endif
-#endif /* __ASM_ARCH_MXC_MX2x_H__ */
+#endif /* ifndef __MACH_MX2x_H__ */
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
/*
* IRAM
*/
#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
+#define MX31_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \
+ IMX_IO_ADDRESS(x, MX31_AVIC) ?: \
+ IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \
+ IMX_IO_ADDRESS(x, MX31_SPBA0))
+
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+ unsigned upper, unsigned lower, unsigned addional)
+{
+ __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+ __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+ __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
#define MX31_INT_I2C3 3
#define MX31_INT_I2C2 4
#define MX31_INT_MPEG4_ENCODER 5
#define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0
#define MX31_SYSTEM_REV_NUM 3
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
#define MXC_INT_UART5 MX31_INT_UART5
#define MXC_INT_CCM MX31_INT_CCM
#define MXC_INT_PCMCIA MX31_INT_PCMCIA
+#endif
+
+#endif /* ifndef __MACH_MX31_H__ */
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
/*
* IRAM
*/
#define MX35_NFC_BASE_ADDR 0xbb000000
#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
+#define MX35_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \
+ IMX_IO_ADDRESS(x, MX35_AVIC) ?: \
+ IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \
+ IMX_IO_ADDRESS(x, MX35_SPBA0))
+
/*
* Interrupt numbers
*/
#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0
#define MX35_SYSTEM_REV_NUM 3
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
#define MXC_INT_OWIRE MX35_INT_OWIRE
#define MXC_INT_MLB MX35_INT_MLB
#define MXC_INT_SPDIF MX35_INT_SPDIF
#define MXC_INT_FEC MX35_INT_FEC
+#endif
+
+#endif /* ifndef __MACH_MX35_H__ */
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
/*
* MX31 memory map:
}
#endif
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
#define L2CC_SIZE MX3x_L2CC_SIZE
#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif
-#endif /* __ASM_ARCH_MXC_MX31_H__ */
+#endif /* ifndef __MACH_MX3x_H__ */
#endif
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
#endif
#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
/*
* arch/arm/plat-mxc/include/mach/uncompress.h
*
- *
- *
* Copyright (C) 1999 ARM Limited
* Copyright (C) Shane Nay (shane@minirl.com)
*
#define __MXC_BOOT_UNCOMPRESS
-#include <mach/hardware.h>
#include <asm/mach-types.h>
static unsigned long uart_base;
config MTD_NAND_MXC
tristate "MXC NAND support"
- depends on ARCH_MX2 || ARCH_MX3
+ depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
help
This enables the driver for the NAND flash controller on the
MXC processors.
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff