mmc: core: add support for eMMC Dual Data Rate

eMMC voltage change not required for 1.8V.  3.3V and 1.8V vcc
are capable of doing DDR. vccq of 1.8v is not required.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 94c8d5a9ecae50f68e643b8e31dce528a85a2349..7863eedf3d9a5a028193c8be7b5d5b9d00ce89c2 100644 (file)
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -717,23 +717,13 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
        mmc_set_ios(host);
 }
 
-/*
- * Change data bus width and DDR mode of a host.
- */
-void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width,
-                          unsigned int ddr)
-{
-       host->ios.bus_width = width;
-       host->ios.ddr = ddr;
-       mmc_set_ios(host);
-}
-
 /*
  * Change data bus width of a host.
  */
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
 {
-       mmc_set_bus_width_ddr(host, width, MMC_SDR_MODE);
+       host->ios.bus_width = width;
+       mmc_set_ios(host);
 }
 
 /**

diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 53d23c240324612e2ab970579a99ef45a365508f..d9411ed2a39bf6490a5a788629d45a628e14e6fe 100644 (file)
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -38,8 +38,6 @@ void mmc_ungate_clock(struct mmc_host *host);
 void mmc_set_ungated(struct mmc_host *host);
 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
-void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width,
-                          unsigned int ddr);
 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
 int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage,
                           bool cmd11);

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a2c795e8f9dd43489ffa7933199f020a22fc6a8f..0433fe66cbad59210c1254a28717a21a40a2d4f9 100644 (file)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -20,6 +20,7 @@
 #include "core.h"
 #include "bus.h"
 #include "mmc_ops.h"
+#include "sd_ops.h"
 
 static const unsigned int tran_exp[] = {
        10000,          100000,         1000000,        10000000,
@@ -633,10 +634,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
         */
        if (mmc_card_highspeed(card)) {
                if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
-                       && (host->caps & (MMC_CAP_1_8V_DDR)))
+                       && ((host->caps & (MMC_CAP_1_8V_DDR |
+                            MMC_CAP_UHS_DDR50))
+                               == (MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50)))
                                ddr = MMC_1_8V_DDR_MODE;
                else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
-                       && (host->caps & (MMC_CAP_1_2V_DDR)))
+                       && ((host->caps & (MMC_CAP_1_2V_DDR |
+                            MMC_CAP_UHS_DDR50))
+                               == (MMC_CAP_1_2V_DDR | MMC_CAP_UHS_DDR50)))
                                ddr = MMC_1_2V_DDR_MODE;
        }
 
@@ -670,8 +675,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
                                         ext_csd_bits[idx][0],
                                         0);
                        if (!err) {
-                               mmc_set_bus_width_ddr(card->host,
-                                                     bus_width, MMC_SDR_MODE);
+                               mmc_set_bus_width(card->host, bus_width);
                                /*
                                 * If controller can't handle bus width test,
                                 * use the highest bus width to maintain
@@ -697,8 +701,29 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
                                1 << bus_width, ddr);
                        goto free_card;
                } else if (ddr) {
+                       /*
+                        * eMMC cards can support 3.3V to 1.2V i/o (vccq)
+                        * signaling.
+                        *
+                        * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq.
+                        *
+                        * 1.8V vccq at 3.3V core voltage (vcc) is not required
+                        * in the JEDEC spec for DDR.
+                        *
+                        * Do not force change in vccq since we are obviously
+                        * working and no change to vccq is needed.
+                        *
+                        * WARNING: eMMC rules are NOT the same as SD DDR
+                        */
+                       if (ddr == EXT_CSD_CARD_TYPE_DDR_1_2V) {
+                               err = mmc_set_signal_voltage(host,
+                                       MMC_SIGNAL_VOLTAGE_120, 0);
+                               if (err)
+                                       goto err;
+                       }
                        mmc_card_set_ddr_mode(card);
-                       mmc_set_bus_width_ddr(card->host, bus_width, ddr);
+                       mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50);
+                       mmc_set_bus_width(card->host, bus_width);
                }
        }
 

diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 6716bd12eccd3e58a2e9773caea9a9a4d4ef536f..de32e6aa018a884d16e35ca6945de3b2540a2da7 100644 (file)
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -66,6 +66,7 @@ struct mmc_ios {
 
 #define MMC_SIGNAL_VOLTAGE_330 0
 #define MMC_SIGNAL_VOLTAGE_180 1
+#define MMC_SIGNAL_VOLTAGE_120 2
 
        unsigned char   drv_type;               /* driver type (A, B, C, D) */