drm/fsl-dcu: use mode flags for hsync/vsync polarity
authorStefan Agner <stefan@agner.ch>
Wed, 18 Nov 2015 03:10:29 +0000 (19:10 -0800)
committerStefan Agner <stefan@agner.ch>
Fri, 26 Feb 2016 00:13:16 +0000 (16:13 -0800)
The current default configuration is as follows:
- Invert VSYNC signal (active LOW)
- Invert HSYNC signal (active LOW)

The mode flags allow to specify the required polarity per
mode. Furthermore, none of the current driver settings is
actually a standard polarity.

This patch applies the current driver default polarities as
explicit flags to the display which has been introduced with
the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now
also parses the flags field and applies the configuration
accordingly, by using the following values as standard
polarities: (e.g. when no flags are specified):
- VSYNC signal not inverted (active HIGH)
- HSYNC signal not inverted (active HIGH)

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
drivers/gpu/drm/panel/panel-simple.c

index 62377e41745bf67191f016983773569b4e8e492a..b36f815bd1d8599b2f73c474b232e02281cfae0b 100644 (file)
@@ -74,7 +74,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
        struct drm_device *dev = crtc->dev;
        struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
        struct drm_display_mode *mode = &crtc->state->mode;
-       unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index;
+       unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index, pol = 0;
        unsigned long dcuclk;
 
        index = drm_crtc_index(crtc);
@@ -89,6 +89,12 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
        vfp = mode->vsync_start - mode->vdisplay;
        vsw = mode->vsync_end - mode->vsync_start;
 
+       if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+               pol |= DCU_SYN_POL_INV_HS_LOW;
+
+       if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+               pol |= DCU_SYN_POL_INV_VS_LOW;
+
        regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
                     DCU_HSYN_PARA_BP(hbp) |
                     DCU_HSYN_PARA_PW(hsw) |
@@ -101,8 +107,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
                     DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
                     DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
        regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
-       regmap_write(fsl_dev->regmap, DCU_SYN_POL,
-                    DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
+       regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
        regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
                     DCU_BGND_G(0) | DCU_BGND_B(0));
        regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
index f88a631c43ab0eb4a79f0fb8fc27741eb1c79319..2164c999052cd58f78c040c8aa79ca252c2d4083 100644 (file)
@@ -1016,6 +1016,7 @@ static const struct drm_display_mode nec_nl4827hc19_05b_mode = {
        .vsync_end = 272 + 2 + 4,
        .vtotal = 272 + 2 + 4 + 2,
        .vrefresh = 74,
+       .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
 };
 
 static const struct panel_desc nec_nl4827hc19_05b = {