This updates mpi headers in fusion drivers to version 1.5.12.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.08
+ * mpi.h Version: 01.05.10
*
* Version History
* ---------------
* 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
+ * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* --------------------------------------------------------------------------
*/
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x0A)
+#define MPI_HEADER_VERSION_UNIT (0x0C)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
#define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
#define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
+#define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
+#define MPI_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
/****************************************************************************/
/* Additional FCP target values (obsolete) */
#define MPI_IOCSTATUS_LAN_CANCELED (0x0087)
/****************************************************************************/
-/* Serial Attached SCSI values */
+/* Serial Attached SCSI values */
/****************************************************************************/
#define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.09
+ * mpi_cnfg.h Version: 01.05.11
*
* Version History
* ---------------
* Added OwnerDevHandle and Flags field to SAS PHY Page 0.
* Added IOC GPIO Flags define to SAS Enclosure Page 0.
* Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
+ * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from
+ * Manufacturing Page 4.
+ * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
+ * Added NumDevsPerEnclosure field to SAS IO Unit page 2.
+ * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
+ * define.
+ * Added EnclosureHandle field to SAS Expander page 0.
+ * Removed redundant NumTableEntriesProg field from SAS
+ * Expander Page 1.
+ * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
+ * SAS1078.
+ * Added more defines for Manufacturing Page 4 Flags field.
+ * Added more defines for IOCSettings and added
+ * ExpanderSpinup field to Bios Page 1.
+ * Added postpone SATA Init bit to SAS IO Unit Page 1
+ * ControlFlags.
+ * Changed LogEntry format for Log Page 0.
* --------------------------------------------------------------------------
*/
#define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626)
#define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642)
#define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640)
-#define MPI_MANUFACTPAGE_DEVICEID_FC949ES (0x0646)
+#define MPI_MANUFACTPAGE_DEVICEID_FC949E (0x0646)
/* SCSI */
#define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030)
#define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031)
#define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A)
#define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054)
#define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058)
-#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0060)
+#define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0062)
typedef struct _CONFIG_PAGE_MANUFACTURING_0
U32 IMVolumeSettings; /* 50h */
U32 Reserved3; /* 54h */
U32 Reserved4; /* 58h */
- U8 ISDataScrubRate; /* 5Ch */
- U8 ISResyncRate; /* 5Dh */
- U16 Reserved5; /* 5Eh */
+ U32 Reserved5; /* 5Ch */
U8 IMEDataScrubRate; /* 60h */
U8 IMEResyncRate; /* 61h */
U16 Reserved6; /* 62h */
} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
-#define MPI_MANUFACTURING4_PAGEVERSION (0x02)
+#define MPI_MANUFACTURING4_PAGEVERSION (0x03)
/* defines for the Flags field */
+#define MPI_MANPAGE4_IME_DISABLE (0x20)
+#define MPI_MANPAGE4_IM_DISABLE (0x10)
+#define MPI_MANPAGE4_IS_DISABLE (0x08)
+#define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE (0x04)
+#define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x02)
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
} CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
-#define MPI_IOUNITPAGE1_PAGEVERSION (0x01)
+#define MPI_IOUNITPAGE1_PAGEVERSION (0x02)
/* IO Unit Page 1 Flags defines */
#define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000)
#define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040)
#define MPI_IOUNITPAGE1_FORCE_32 (0x00000080)
#define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
-
+#define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE (0x00000200)
typedef struct _MPI_ADAPTER_INFO
{
U32 Reserved1; /* 0Ch */
U32 DeviceSettings; /* 10h */
U16 NumberOfDevices; /* 14h */
- U16 Reserved2; /* 16h */
+ U8 ExpanderSpinup; /* 16h */
+ U8 Reserved2; /* 17h */
U16 IOTimeoutBlockDevicesNonRM; /* 18h */
U16 IOTimeoutSequential; /* 1Ah */
U16 IOTimeoutOther; /* 1Ch */
} CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
-#define MPI_BIOSPAGE1_PAGEVERSION (0x02)
+#define MPI_BIOSPAGE1_PAGEVERSION (0x03)
/* values for the BiosOptions field */
#define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400)
#define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
/* values for the IOCSettings field */
+#define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY (0x0F000000)
+#define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
+
#define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000)
#define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20)
+
+#define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE (0x00080000)
+#define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE (0x00040000)
+
#define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
#define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
#define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
#define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
#define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
+/* defines for the ExpanderSpinup field */
+#define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET (0xF0)
+#define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET (4)
+#define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY (0x0F)
+
typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER
{
U32 Reserved1; /* 00h */
#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8)
#define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \
- ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MIN_SYNC_PERIOD) \
+ ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \
>> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \
)
#define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000)
#define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16)
#define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \
- ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MASK_MAX_SYNC_OFFSET) \
+ ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \
>> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \
)
#define MPI_SCSIPORTPAGE0_CAP_IDP (0x08000000)
} CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
-#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x04)
+#define MPI_SASIOUNITPAGE1_PAGEVERSION (0x05)
/* values for SAS IO Unit Page 1 ControlFlags */
-#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
-#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800)
-
-#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
-#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02)
-
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
-#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
-#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008)
-#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
-#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
-#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
+#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
+#define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800)
+
+#define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
+#define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02)
+
+#define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT (0x0100)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
+#define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
+#define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008)
+#define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
+#define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
+#define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
/* values for SAS IO Unit Page 1 PortFlags */
-#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00)
-#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04)
-#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04)
+#define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
/* values for SAS IO Unit Page 0 PhyFlags */
-#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04)
-#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02)
-#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02)
+#define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01)
/* values for SAS IO Unit Page 0 MaxMinLinkRate */
-#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0)
-#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80)
-#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90)
-#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F)
-#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08)
-#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09)
+#define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0)
+#define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80)
+#define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90)
+#define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F)
+#define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08)
+#define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09)
/* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
{
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
- U32 Reserved1; /* 08h */
+ U8 NumDevsPerEnclosure; /* 08h */
+ U8 Reserved1; /* 09h */
+ U16 Reserved2; /* 0Ah */
U16 MaxPersistentIDs; /* 0Ch */
U16 NumPersistentIDsUsed; /* 0Eh */
U8 Status; /* 10h */
U8 Flags; /* 11h */
- U16 MaxNumPhysicalMappedIDs;/* 12h */ /* 12h */
+ U16 MaxNumPhysicalMappedIDs;/* 12h */
} CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
-#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x04)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION (0x05)
/* values for SAS IO Unit Page 2 Status field */
#define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
#define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP (0x00)
#define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP (0x01)
#define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02)
+#define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP (0x07)
#define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10)
#define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT (0x20)
CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */
U8 PhysicalPort; /* 08h */
U8 Reserved1; /* 09h */
- U16 Reserved2; /* 0Ah */
+ U16 EnclosureHandle; /* 0Ah */
U64 SASAddress; /* 0Ch */
U32 DiscoveryStatus; /* 14h */
U16 DevHandle; /* 18h */
} CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0,
SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t;
-#define MPI_SASEXPANDER0_PAGEVERSION (0x02)
+#define MPI_SASEXPANDER0_PAGEVERSION (0x03)
/* values for SAS Expander Page 0 DiscoveryStatus field */
#define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
U8 NegotiatedLinkRate; /* 1Fh */
U8 PhyIdentifier; /* 20h */
U8 AttachedPhyIdentifier; /* 21h */
- U8 NumTableEntriesProg; /* 22h */
+ U8 Reserved3; /* 22h */
U8 DiscoveryInfo; /* 23h */
- U32 Reserved3; /* 24h */
+ U32 Reserved4; /* 24h */
} CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1,
SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t;
#define MPI_LOG_0_NUM_LOG_ENTRIES (1)
#endif
-#define MPI_LOG_0_LOG_DATA_LENGTH (20)
+#define MPI_LOG_0_LOG_DATA_LENGTH (0x1C)
typedef struct _MPI_LOG_0_ENTRY
{
- U64 WWID; /* 00h */
- U32 TimeStamp; /* 08h */
- U32 Reserved1; /* 0Ch */
- U16 LogSequence; /* 10h */
- U16 LogEntryQualifier; /* 12h */
- U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 14h */
+ U32 TimeStamp; /* 00h */
+ U32 Reserved1; /* 04h */
+ U16 LogSequence; /* 08h */
+ U16 LogEntryQualifier; /* 0Ah */
+ U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */
} MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY,
MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t;
} CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0,
LogPage0_t, MPI_POINTER pLogPage0_t;
-#define MPI_LOG_0_PAGEVERSION (0x00)
+#define MPI_LOG_0_PAGEVERSION (0x01)
#endif
Copyright (c) 2000-2005 LSI Logic Corporation.
---------------------------------------
- Header Set Release Version: 01.05.10
- Header Set Release Date: 03-11-05
+ Header Set Release Version: 01.05.12
+ Header Set Release Date: 08-30-05
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi.h 01.05.08 01.05.07
- mpi_ioc.h 01.05.09 01.05.08
- mpi_cnfg.h 01.05.09 01.05.08
- mpi_init.h 01.05.05 01.05.04
- mpi_targ.h 01.05.05 01.05.04
+ mpi.h 01.05.10 01.05.09
+ mpi_ioc.h 01.05.10 01.05.09
+ mpi_cnfg.h 01.05.11 01.05.10
+ mpi_init.h 01.05.06 01.05.06
+ mpi_targ.h 01.05.05 01.05.05
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
- mpi_sas.h 01.05.01 01.05.01
- mpi_type.h 01.05.01 01.05.01
- mpi_history.txt 01.05.09 01.05.09
+ mpi_sas.h 01.05.02 01.05.01
+ mpi_type.h 01.05.02 01.05.01
+ mpi_history.txt 01.05.12 01.05.11
* Date Version Description
* 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
+ * 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* --------------------------------------------------------------------------
mpi_ioc.h
* Removed IOCFacts Reply EEDP Capability bit.
* 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
* Added Max SATA Targets to SAS Discovery Error event.
+ * 08-30-05 01.05.10 Added 4 new events and their event data structures.
+ * Added new ReasonCode value for SAS Device Status Change
+ * event.
+ * Added new family code for FC949E.
* --------------------------------------------------------------------------
mpi_cnfg.h
* Added OwnerDevHandle and Flags field to SAS PHY Page 0.
* Added IOC GPIO Flags define to SAS Enclosure Page 0.
* Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
+ * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from
+ * Manufacturing Page 4.
+ * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
+ * Added NumDevsPerEnclosure field to SAS IO Unit page 2.
+ * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
+ * define.
+ * Added EnclosureHandle field to SAS Expander page 0.
+ * Removed redundant NumTableEntriesProg field from SAS
+ * Expander Page 1.
+ * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
+ * SAS1078.
+ * Added more defines for Manufacturing Page 4 Flags field.
+ * Added more defines for IOCSettings and added
+ * ExpanderSpinup field to Bios Page 1.
+ * Added postpone SATA Init bit to SAS IO Unit Page 1
+ * ControlFlags.
+ * Changed LogEntry format for Log Page 0.
* --------------------------------------------------------------------------
mpi_init.h
* addressing.
* 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
* Added four new defines for SEP SlotStatus.
+ * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
+ * unique in the first 32 characters.
* --------------------------------------------------------------------------
mpi_targ.h
mpi_sas.h
* 08-19-04 01.05.01 Original release.
+ * 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
+ * Added PrimFlags and Primitive field to SAS IO Unit
+ * Control request, and added a new operation code.
* --------------------------------------------------------------------------
mpi_type.h
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
+ * 08-30-05 01.05.02 Added PowerPC option to #ifdef's.
* --------------------------------------------------------------------------
mpi_history.txt Parts list history
-Filename 01.05.10 01.05.09
----------- -------- --------
-mpi.h 01.05.08 01.05.07
-mpi_ioc.h 01.05.09 01.05.08
-mpi_cnfg.h 01.05.09 01.05.08
-mpi_init.h 01.05.05 01.05.04
-mpi_targ.h 01.05.05 01.05.04
-mpi_fc.h 01.05.01 01.05.01
-mpi_lan.h 01.05.01 01.05.01
-mpi_raid.h 01.05.02 01.05.02
-mpi_tool.h 01.05.03 01.05.03
-mpi_inb.h 01.05.01 01.05.01
-mpi_sas.h 01.05.01 01.05.01
-mpi_type.h 01.05.01 01.05.01
+Filename 01.05.12 01.05.11 01.05.10 01.05.09
+---------- -------- -------- -------- --------
+mpi.h 01.05.10 01.05.09 01.05.08 01.05.07
+mpi_ioc.h 01.05.10 01.05.09 01.05.09 01.05.08
+mpi_cnfg.h 01.05.11 01.05.10 01.05.09 01.05.08
+mpi_init.h 01.05.06 01.05.06 01.05.05 01.05.04
+mpi_targ.h 01.05.05 01.05.05 01.05.05 01.05.04
+mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02
+mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_sas.h 01.05.02 01.05.01 01.05.01 01.05.01
+mpi_type.h 01.05.02 01.05.01 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
- * mpi_init.h Version: 01.05.05
+ * mpi_init.h Version: 01.05.06
*
* Version History
* ---------------
* addressing.
* 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
* Added four new defines for SEP SlotStatus.
+ * 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
+ * unique in the first 32 characters.
* --------------------------------------------------------------------------
*/
/* SCSI IO 32 MsgFlags bits */
#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH (0x01)
-#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_32 (0x00)
-#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_64 (0x01)
+#define MPI_SCSIIO32_MSGFLGS_32_SENSE_WIDTH (0x00)
+#define MPI_SCSIIO32_MSGFLGS_64_SENSE_WIDTH (0x01)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION (0x02)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST (0x00)
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.09
+ * mpi_ioc.h Version: 01.05.10
*
* Version History
* ---------------
* Removed IOCFacts Reply EEDP Capability bit.
* 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
* Added Max SATA Targets to SAS Discovery Error event.
+ * 08-30-05 01.05.10 Added 4 new events and their event data structures.
+ * Added new ReasonCode value for SAS Device Status Change
+ * event.
+ * Added new family code for FC949E.
* --------------------------------------------------------------------------
*/
#define MPI_EVENT_PERSISTENT_TABLE_FULL (0x00000011)
#define MPI_EVENT_SAS_PHY_LINK_STATUS (0x00000012)
#define MPI_EVENT_SAS_DISCOVERY_ERROR (0x00000013)
+#define MPI_EVENT_IR_RESYNC_UPDATE (0x00000014)
+#define MPI_EVENT_IR2 (0x00000015)
+#define MPI_EVENT_SAS_DISCOVERY (0x00000016)
+#define MPI_EVENT_LOG_ENTRY_ADDED (0x00000021)
/* AckRequired field values */
} EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE,
EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t;
+/* LogEntryAdded Event data */
+
+/* this structure matches MPI_LOG_0_ENTRY in mpi_cnfg.h */
+#define MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH (0x1C)
+typedef struct _EVENT_DATA_LOG_ENTRY
+{
+ U32 TimeStamp; /* 00h */
+ U32 Reserved1; /* 04h */
+ U16 LogSequence; /* 08h */
+ U16 LogEntryQualifier; /* 0Ah */
+ U8 LogData[MPI_EVENT_DATA_LOG_ENTRY_DATA_LENGTH]; /* 0Ch */
+} EVENT_DATA_LOG_ENTRY, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY,
+ MpiEventDataLogEntry_t, MPI_POINTER pMpiEventDataLogEntry_t;
+
+typedef struct _EVENT_DATA_LOG_ENTRY_ADDED
+{
+ U16 LogSequence; /* 00h */
+ U16 Reserved1; /* 02h */
+ U32 Reserved2; /* 04h */
+ EVENT_DATA_LOG_ENTRY LogEntry; /* 08h */
+} EVENT_DATA_LOG_ENTRY_ADDED, MPI_POINTER PTR_EVENT_DATA_LOG_ENTRY_ADDED,
+ MpiEventDataLogEntryAdded_t, MPI_POINTER pMpiEventDataLogEntryAdded_t;
+
/* SCSI Event data for Port, Bus and Device forms */
typedef struct _EVENT_DATA_SCSI
#define MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
#define MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED (0x06)
#define MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
/* SCSI Event data for Queue Full event */
#define MPI_EVENT_RAID_RC_SMART_DATA (0x0A)
#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED (0x0B)
+
+/* MPI Integrated RAID Resync Update Event data */
+
+typedef struct _MPI_EVENT_DATA_IR_RESYNC_UPDATE
+{
+ U8 VolumeID; /* 00h */
+ U8 VolumeBus; /* 01h */
+ U8 ResyncComplete; /* 02h */
+ U8 Reserved1; /* 03h */
+ U32 Reserved2; /* 04h */
+} MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+ MPI_POINTER PTR_MPI_EVENT_DATA_IR_RESYNC_UPDATE,
+ MpiEventDataIrResyncUpdate_t, MPI_POINTER pMpiEventDataIrResyncUpdate_t;
+
+/* MPI IR2 Event data */
+
+/* MPI_LD_STATE or MPI_PD_STATE */
+typedef struct _IR2_STATE_CHANGED
+{
+ U16 PreviousState; /* 00h */
+ U16 NewState; /* 02h */
+} IR2_STATE_CHANGED, MPI_POINTER PTR_IR2_STATE_CHANGED;
+
+typedef struct _IR2_PD_INFO
+{
+ U16 DeviceHandle; /* 00h */
+ U8 TruncEnclosureHandle; /* 02h */
+ U8 TruncatedSlot; /* 03h */
+} IR2_PD_INFO, MPI_POINTER PTR_IR2_PD_INFO;
+
+typedef union _MPI_IR2_RC_EVENT_DATA
+{
+ IR2_STATE_CHANGED StateChanged;
+ U32 Lba;
+ IR2_PD_INFO PdInfo;
+} MPI_IR2_RC_EVENT_DATA, MPI_POINTER PTR_MPI_IR2_RC_EVENT_DATA;
+
+typedef struct _MPI_EVENT_DATA_IR2
+{
+ U8 TargetID; /* 00h */
+ U8 Bus; /* 01h */
+ U8 ReasonCode; /* 02h */
+ U8 PhysDiskNum; /* 03h */
+ MPI_IR2_RC_EVENT_DATA IR2EventData; /* 04h */
+} MPI_EVENT_DATA_IR2, MPI_POINTER PTR_MPI_EVENT_DATA_IR2,
+ MpiEventDataIR2_t, MPI_POINTER pMpiEventDataIR2_t;
+
+/* MPI IR2 Event data ReasonCode values */
+#define MPI_EVENT_IR2_RC_LD_STATE_CHANGED (0x01)
+#define MPI_EVENT_IR2_RC_PD_STATE_CHANGED (0x02)
+#define MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL (0x03)
+#define MPI_EVENT_IR2_RC_PD_INSERTED (0x04)
+#define MPI_EVENT_IR2_RC_PD_REMOVED (0x05)
+#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED (0x06)
+#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR (0x07)
+
+/* defines for logical disk states */
+#define MPI_LD_STATE_OPTIMAL (0x00)
+#define MPI_LD_STATE_DEGRADED (0x01)
+#define MPI_LD_STATE_FAILED (0x02)
+#define MPI_LD_STATE_MISSING (0x03)
+#define MPI_LD_STATE_OFFLINE (0x04)
+
+/* defines for physical disk states */
+#define MPI_PD_STATE_ONLINE (0x00)
+#define MPI_PD_STATE_MISSING (0x01)
+#define MPI_PD_STATE_NOT_COMPATIBLE (0x02)
+#define MPI_PD_STATE_FAILED (0x03)
+#define MPI_PD_STATE_INITIALIZING (0x04)
+#define MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST (0x05)
+#define MPI_PD_STATE_FAILED_AT_HOST_REQUEST (0x06)
+#define MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON (0xFF)
+
/* MPI Link Status Change Event data */
typedef struct _EVENT_DATA_LINK_STATUS
#define MPI_EVENT_SAS_PLS_LR_RATE_1_5 (0x08)
#define MPI_EVENT_SAS_PLS_LR_RATE_3_0 (0x09)
+/* SAS Discovery Event data */
+
+typedef struct _EVENT_DATA_SAS_DISCOVERY
+{
+ U32 DiscoveryStatus; /* 00h */
+ U32 Reserved1; /* 04h */
+} EVENT_DATA_SAS_DISCOVERY, MPI_POINTER PTR_EVENT_DATA_SAS_DISCOVERY,
+ EventDataSasDiscovery_t, MPI_POINTER pEventDataSasDiscovery_t;
+
+#define MPI_EVENT_SAS_DSCVRY_COMPLETE (0x00000000)
+#define MPI_EVENT_SAS_DSCVRY_IN_PROGRESS (0x00000001)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000)
+#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16)
+
/* SAS Discovery Errror Event data */
typedef struct _EVENT_DATA_DISCOVERY_ERROR
#define MPI_FW_HEADER_PID_FAMILY_919XL_FC (0x0003) /* 919XL and 929XL */
#define MPI_FW_HEADER_PID_FAMILY_939X_FC (0x0004) /* 939X and 949X */
#define MPI_FW_HEADER_PID_FAMILY_959_FC (0x0005)
+#define MPI_FW_HEADER_PID_FAMILY_949E_FC (0x0006)
/* SAS */
#define MPI_FW_HEADER_PID_FAMILY_1064_SAS (0x0001)
#define MPI_FW_HEADER_PID_FAMILY_1068_SAS (0x0002)
--- /dev/null
+/*
+ * Copyright (c) 2000-2001 LSI Logic Corporation. All rights reserved.
+ *
+ * NAME: fc_log.h
+ * SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
+ * DESCRIPTION: Contains the enumerated list of values that may be returned
+ * in the IOCLogInfo field of a MPI Default Reply Message.
+ *
+ * CREATION DATE: 6/02/2000
+ * ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
+ */
+
+
+/*
+ * MpiIocLogInfo_t enum
+ *
+ * These 32 bit values are used in the IOCLogInfo field of the MPI reply
+ * messages.
+ * The value is 0xabcccccc where
+ * a = The type of log info as per the MPI spec. Since these codes are
+ * all for Fibre Channel this value will always be 2.
+ * b = Specifies a subclass of the firmware where
+ * 0 = FCP Initiator
+ * 1 = FCP Target
+ * 2 = LAN
+ * 3 = MPI Message Layer
+ * 4 = FC Link
+ * 5 = Context Manager
+ * 6 = Invalid Field Offset
+ * 7 = State Change Info
+ * all others are reserved for future use
+ * c = A specific value within the subclass.
+ *
+ * NOTE: Any new values should be added to the end of each subclass so that the
+ * codes remain consistent across firmware releases.
+ */
+typedef enum _MpiIocLogInfoFc
+{
+ MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000,
+ MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */
+ MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */
+
+ MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000,
+ MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
+ MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */
+ MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */
+ MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */
+ MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */
+ MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */
+ MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */
+ MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */
+ MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */
+
+ MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000,
+ MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */
+ MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */
+ MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */
+ MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */
+
+ MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000,
+
+ MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000,
+ MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */
+ MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */
+ MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
+ MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */
+
+ MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000,
+
+ MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
+ MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff,
+
+ MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */
+
+} MpiIocLogInfoFc_t;
--- /dev/null
+
+/***************************************************************************
+ * *
+ * Copyright 2003 LSI Logic Corporation. All rights reserved. *
+ * *
+ * This file is confidential and a trade secret of LSI Logic. The *
+ * receipt of or possession of this file does not convey any rights to *
+ * reproduce or disclose its contents or to manufacture, use, or sell *
+ * anything it may describe, in whole, or in part, without the specific *
+ * written consent of LSI Logic Corporation. *
+ * *
+ ***************************************************************************
+ *
+ * Name: iopiIocLogInfo.h
+ * Title: SAS Firmware IOP Interface IOC Log Info Definitions
+ * Programmer: Guy Kendall
+ * Creation Date: September 24, 2003
+ *
+ * Version History
+ * ---------------
+ *
+ * Last Updated
+ * -------------
+ * Version %version: 22 %
+ * Date Updated %date_modified: %
+ * Programmer %created_by: nperucca %
+ *
+ * Date Who Description
+ * -------- --- -------------------------------------------------------
+ * 09/24/03 GWK Initial version
+ *
+ *
+ * Description
+ * ------------
+ * This include file contains SAS firmware interface IOC Log Info codes
+ *
+ *-------------------------------------------------------------------------
+ */
+
+#ifndef IOPI_IOCLOGINFO_H_INCLUDED
+#define IOPI_IOCLOGINFO_H_INCLUDED
+
+
+/****************************************************************************/
+/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */
+/* Format: */
+/* Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3) */
+/* Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR */
+/* Bits 23-16: LOGINFO_CODE */
+/* Bits 15-0: LOGINFO_CODE Specific */
+/****************************************************************************/
+
+/****************************************************************************/
+/* IOC_LOGINFO_ORIGINATOR defines */
+/****************************************************************************/
+#define IOC_LOGINFO_ORIGINATOR_IOP (0x00000000)
+#define IOC_LOGINFO_ORIGINATOR_PL (0x01000000)
+#define IOC_LOGINFO_ORIGINATOR_IR (0x02000000)
+
+/****************************************************************************/
+/* LOGINFO_CODE defines */
+/****************************************************************************/
+#define IOC_LOGINFO_CODE_MASK (0x00FF0000)
+#define IOC_LOGINFO_CODE_SHIFT (16)
+
+/****************************************************************************/
+/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */
+/****************************************************************************/
+#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
+#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
+#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
+
+
+/****************************************************************************/
+/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
+/****************************************************************************/
+#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000)
+#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
+#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
+#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
+#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
+#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
+#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
+#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
+#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
+#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
+#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
+#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
+#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
+#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
+#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
+#define PL_LOGINFO_CODE_RESET (0x00110000)
+#define PL_LOGINFO_CODE_ABORT (0x00120000)
+#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
+#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
+#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
+#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
+#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
+#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
+#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
+#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
+#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
+#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
+#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
+#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
+#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
+
+
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */
+
+#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
+#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
+#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
+#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/
+
+
+/****************************************************************************/
+/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */
+/****************************************************************************/
+#define IR_LOGINFO_CODE_UNUSED1 (0x00010000)
+#define IR_LOGINFO_CODE_UNUSED2 (0x00020000)
+
+/****************************************************************************/
+/* Defines for convienence */
+/****************************************************************************/
+#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP)
+#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)
+#define IOC_LOGINFO_PREFIX_IR ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR)
+
+#endif /* end of file */
+
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
- * mpi_sas.h Version: 01.05.01
+ * mpi_sas.h Version: 01.05.02
*
* Version History
* ---------------
* Date Version Description
* -------- -------- ------------------------------------------------------
* 08-19-04 01.05.01 Original release.
+ * 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
+ * Added PrimFlags and Primitive field to SAS IO Unit
+ * Control request, and added a new operation code.
* --------------------------------------------------------------------------
*/
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
+#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
U8 TargetID; /* 0Ch */
U8 Bus; /* 0Dh */
U8 PhyNum; /* 0Eh */
- U8 Reserved4; /* 0Fh */
- U32 Reserved5; /* 10h */
+ U8 PrimFlags; /* 0Fh */
+ U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
- U32 Reserved6; /* 1Ch */
+ U32 Reserved4; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
/* values for the Operation field */
-#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
-#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
-#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
-#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
-#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
-#define MPI_SAS_OP_MAP_CURRENT (0x09)
+#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
+#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
+#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
+#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
+#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
+#define MPI_SAS_OP_MAP_CURRENT (0x09)
+#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
+
+/* values for the PrimFlags field */
+#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
+#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02)
+#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01)
/* SAS IO Unit Control Reply */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff