mtd: m25p80: Add support for Macronix MX25L25635E

This is a 256Mbit (32MiB) part so minor changes were made to support
4-byte addressing.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 80404e1a4d5ec05009ecf1d3236e69ad5c99ddba..96ae54e9650ecdc422b3e59307f32f56549570a4 100644 (file)
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -51,6 +51,10 @@
 #define        OPCODE_WRDI             0x04    /* Write disable */
 #define        OPCODE_AAI_WP           0xad    /* Auto address increment word program */
 
+/* Used for Macronix flashes only. */
+#define        OPCODE_EN4B             0xb7    /* Enter 4-byte mode */
+#define        OPCODE_EX4B             0xe9    /* Exit 4-byte mode */
+
 /* Status Register bits. */
 #define        SR_WIP                  1       /* Write in progress */
 #define        SR_WEL                  2       /* Write enable latch */
@@ -62,7 +66,7 @@
 
 /* Define max times to check status register before we give up. */
 #define        MAX_READY_WAIT_JIFFIES  (40 * HZ)       /* M25P16 specs 40s max chip erase */
-#define        MAX_CMD_SIZE            4
+#define        MAX_CMD_SIZE            5
 
 #ifdef CONFIG_M25PXX_USE_FAST_READ
 #define OPCODE_READ    OPCODE_FAST_READ
@@ -151,6 +155,16 @@ static inline int write_disable(struct m25p *flash)
        return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
 }
 
+/*
+ * Enable/disable 4-byte addressing mode.
+ */
+static inline int set_4byte(struct m25p *flash, int enable)
+{
+       u8      code = enable ? OPCODE_EN4B : OPCODE_EX4B;
+
+       return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
+}
+
 /*
  * Service routine to read status register until ready, or timeout occurs.
  * Returns non-zero if error.
@@ -207,6 +221,7 @@ static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd)
        cmd[1] = addr >> (flash->addr_width * 8 -  8);
        cmd[2] = addr >> (flash->addr_width * 8 - 16);
        cmd[3] = addr >> (flash->addr_width * 8 - 24);
+       cmd[4] = addr >> (flash->addr_width * 8 - 32);
 }
 
 static int m25p_cmdsz(struct m25p *flash)
@@ -607,7 +622,6 @@ struct flash_info {
                .sector_size = (_sector_size),                          \
                .n_sectors = (_n_sectors),                              \
                .page_size = 256,                                       \
-               .addr_width = 3,                                        \
                .flags = (_flags),                                      \
        })
 
@@ -653,6 +667,7 @@ static const struct spi_device_id m25p_ids[] = {
        { "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
        { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
        { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+       { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
 
        /* Spansion -- single (large) sector size only, at least
         * for the chips listed here (without boot sectors).
@@ -884,7 +899,17 @@ static int __devinit m25p_probe(struct spi_device *spi)
 
        flash->mtd.dev.parent = &spi->dev;
        flash->page_size = info->page_size;
-       flash->addr_width = info->addr_width;
+
+       if (info->addr_width)
+               flash->addr_width = info->addr_width;
+       else {
+               /* enable 4-byte addressing if the device exceeds 16MiB */
+               if (flash->mtd.size > 0x1000000) {
+                       flash->addr_width = 4;
+                       set_4byte(flash, 1);
+               } else
+                       flash->addr_width = 3;
+       }
 
        dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
                        (long long)flash->mtd.size >> 10);