info->IER |= UART_IER_MSI;
}
/* TBD:
- * Does clearing IER_MSI imply that we should disbale the VBL interrupt ?
+ * Does clearing IER_MSI imply that we should disable the VBL interrupt ?
*/
/*
buff_list);
if (buf->status != BUFSTAT_AVAILABLE) {
v4l2_err(&dev->v4l2_dev,
- "buffer not marked as availbale\n");
+ "buffer not marked as available\n");
ret = -EFAULT;
goto err;
}
#define B44_DMARX_STAT 0x021CUL /* DMA RX Current Active Desc. + Status */
#define DMARX_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
#define DMARX_STAT_SMASK 0x0000f000 /* State Mask */
-#define DMARX_STAT_SDISABLED 0x00000000 /* State Disbaled */
+#define DMARX_STAT_SDISABLED 0x00000000 /* State Disabled */
#define DMARX_STAT_SACTIVE 0x00001000 /* State Active */
#define DMARX_STAT_SIDLE 0x00002000 /* State Idle Wait */
#define DMARX_STAT_SSTOPPED 0x00003000 /* State Stopped */
/* ack any pending wake events, disable PME */
pci_enable_wake(pdev, 0, 0);
- /* disbale reverse auto-negotiation */
+ /* disable reverse auto-negotiation */
if (nic->phy == phy_82552_v) {
u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
E100_82552_SMARTSPEED);
struct niu_parent *parent;
u32 flags;
-#define NIU_FLAGS_HOTPLUG_PHY_PRESENT 0x02000000 /* Removebale PHY detected*/
-#define NIU_FLAGS_HOTPLUG_PHY 0x01000000 /* Removebale PHY */
+#define NIU_FLAGS_HOTPLUG_PHY_PRESENT 0x02000000 /* Removeable PHY detected*/
+#define NIU_FLAGS_HOTPLUG_PHY 0x01000000 /* Removeable PHY */
#define NIU_FLAGS_VPD_VALID 0x00800000 /* VPD has valid version */
#define NIU_FLAGS_MSIX 0x00400000 /* MSI-X in use */
#define NIU_FLAGS_MCAST 0x00200000 /* multicast filter enabled */
u8 type; /* Type of the device */
u8 cur_status; /* current status of the device */
u8 tag_depth; /* Level of tagging */
- u8 sync_neg; /* sync negotiation - ENABLE or DISBALE */
+ u8 sync_neg; /* sync negotiation - ENABLE or DISABLE */
u32 size; /* configurable size in terms of 512 byte
blocks */
}__attribute__ ((packed)) phys_drv;
* @type : Type of the device
* @cur_status : current status of the device
* @tag_depth : Level of tagging
- * @sync_neg : sync negotiation - ENABLE or DISBALE
+ * @sync_neg : sync negotiation - ENABLE or DISABLE
* @size : configurable size in terms of 512 byte
*/
typedef struct {
#if 0
MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
#else
- // If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+ // If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
if ((
#ifdef DOT11_N_SUPPORT
(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
#if 0
MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
#else
- // If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+ // If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
if ((
#ifdef DOT11_N_SUPPORT
(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
MacReg &= 0xFF0000FF;
- // If the user want disable RtsThreshold and enbale Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
+ // If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
if ((
#ifdef DOT11_N_SUPPORT
(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
if (test_bit(WDT_ENABLED, &wdt_status))
state = wdt_disable();
- /* if the timer is not disbaled reload and notify that we are still
+ /* if the timer is not disabled reload and notify that we are still
* going down
*/
if (state != 0) {
#endif
/* WS0_CTRL, WS0_SYNC: input TSL1, I2S */
- /* At initialization WS1 and WS2 are disbaled (configured as input */
+ /* At initialization WS1 and WS2 are disabled (configured as input) */
acon1 |= 0 * WS1_CTRL;
acon1 |= 0 * WS2_CTRL;