Limitations
-----------
-VRF device currently only works for IPv4. Support for IPv6 is under development.
-
Index of original ingress interface is not available via cmsg. Will address
soon.
+
+################################################################################
+
+Using iproute2 for VRFs
+=======================
+VRF devices do *not* have to start with 'vrf-'. That is a convention used here
+for emphasis of the device type, similar to use of 'br' in bridge names.
+
+1. Create a VRF
+
+ To instantiate a VRF device and associate it with a table:
+ $ ip link add dev NAME type vrf table ID
+
+ Remember to add the ip rules as well:
+ $ ip ru add oif NAME table 10
+ $ ip ru add iif NAME table 10
+ $ ip -6 ru add oif NAME table 10
+ $ ip -6 ru add iif NAME table 10
+
+ Without the rules route lookups are not directed to the table.
+
+ For example:
+ $ ip link add dev vrf-blue type vrf table 10
+ $ ip ru add pref 200 oif vrf-blue table 10
+ $ ip ru add pref 200 iif vrf-blue table 10
+ $ ip -6 ru add pref 200 oif vrf-blue table 10
+ $ ip -6 ru add pref 200 iif vrf-blue table 10
+
+
+2. List VRFs
+
+ To list VRFs that have been created:
+ $ ip [-d] link show type vrf
+ NOTE: The -d option is needed to show the table id
+
+ For example:
+ $ ip -d link show type vrf
+ 11: vrf-mgmt: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
+ link/ether 72:b3:ba:91:e2:24 brd ff:ff:ff:ff:ff:ff promiscuity 0
+ vrf table 1 addrgenmode eui64
+ 12: vrf-red: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
+ link/ether b6:6f:6e:f6:da:73 brd ff:ff:ff:ff:ff:ff promiscuity 0
+ vrf table 10 addrgenmode eui64
+ 13: vrf-blue: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
+ link/ether 36:62:e8:7d:bb:8c brd ff:ff:ff:ff:ff:ff promiscuity 0
+ vrf table 66 addrgenmode eui64
+ 14: vrf-green: <NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
+ link/ether e6:28:b8:63:70:bb brd ff:ff:ff:ff:ff:ff promiscuity 0
+ vrf table 81 addrgenmode eui64
+
+
+ Or in brief output:
+
+ $ ip -br link show type vrf
+ vrf-mgmt UP 72:b3:ba:91:e2:24 <NOARP,MASTER,UP,LOWER_UP>
+ vrf-red UP b6:6f:6e:f6:da:73 <NOARP,MASTER,UP,LOWER_UP>
+ vrf-blue UP 36:62:e8:7d:bb:8c <NOARP,MASTER,UP,LOWER_UP>
+ vrf-green UP e6:28:b8:63:70:bb <NOARP,MASTER,UP,LOWER_UP>
+
+
+3. Assign a Network Interface to a VRF
+
+ Network interfaces are assigned to a VRF by enslaving the netdevice to a
+ VRF device:
+ $ ip link set dev NAME master VRF-NAME
+
+ On enslavement connected and local routes are automatically moved to the
+ table associated with the VRF device.
+
+ For example:
+ $ ip link set dev eth0 master vrf-mgmt
+
+
+4. Show Devices Assigned to a VRF
+
+ To show devices that have been assigned to a specific VRF add the master
+ option to the ip command:
+ $ ip link show master VRF-NAME
+
+ For example:
+ $ ip link show master vrf-red
+ 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP mode DEFAULT group default qlen 1000
+ link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff
+ 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP mode DEFAULT group default qlen 1000
+ link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff
+ 7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master vrf-red state DOWN mode DEFAULT group default qlen 1000
+ link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff
+
+
+ Or using the brief output:
+ $ ip -br link show master vrf-red
+ eth1 UP 02:00:00:00:02:02 <BROADCAST,MULTICAST,UP,LOWER_UP>
+ eth2 UP 02:00:00:00:02:03 <BROADCAST,MULTICAST,UP,LOWER_UP>
+ eth5 DOWN 02:00:00:00:02:06 <BROADCAST,MULTICAST>
+
+
+5. Show Neighbor Entries for a VRF
+
+ To list neighbor entries associated with devices enslaved to a VRF device
+ add the master option to the ip command:
+ $ ip [-6] neigh show master VRF-NAME
+
+ For example:
+ $ ip neigh show master vrf-red
+ 10.2.1.254 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE
+ 10.2.2.254 dev eth2 lladdr 5e:54:01:6a:ee:80 REACHABLE
+
+ $ ip -6 neigh show master vrf-red
+ 2002:1::64 dev eth1 lladdr a6:d9:c7:4f:06:23 REACHABLE
+
+
+6. Show Addresses for a VRF
+
+ To show addresses for interfaces associated with a VRF add the master
+ option to the ip command:
+ $ ip addr show master VRF-NAME
+
+ For example:
+ $ ip addr show master vrf-red
+ 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP group default qlen 1000
+ link/ether 02:00:00:00:02:02 brd ff:ff:ff:ff:ff:ff
+ inet 10.2.1.2/24 brd 10.2.1.255 scope global eth1
+ valid_lft forever preferred_lft forever
+ inet6 2002:1::2/120 scope global
+ valid_lft forever preferred_lft forever
+ inet6 fe80::ff:fe00:202/64 scope link
+ valid_lft forever preferred_lft forever
+ 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vrf-red state UP group default qlen 1000
+ link/ether 02:00:00:00:02:03 brd ff:ff:ff:ff:ff:ff
+ inet 10.2.2.2/24 brd 10.2.2.255 scope global eth2
+ valid_lft forever preferred_lft forever
+ inet6 2002:2::2/120 scope global
+ valid_lft forever preferred_lft forever
+ inet6 fe80::ff:fe00:203/64 scope link
+ valid_lft forever preferred_lft forever
+ 7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master vrf-red state DOWN group default qlen 1000
+ link/ether 02:00:00:00:02:06 brd ff:ff:ff:ff:ff:ff
+
+ Or in brief format:
+ $ ip -br addr show master vrf-red
+ eth1 UP 10.2.1.2/24 2002:1::2/120 fe80::ff:fe00:202/64
+ eth2 UP 10.2.2.2/24 2002:2::2/120 fe80::ff:fe00:203/64
+ eth5 DOWN
+
+
+7. Show Routes for a VRF
+
+ To show routes for a VRF use the ip command to display the table associated
+ with the VRF device:
+ $ ip [-6] route show table ID
+
+ For example:
+ $ ip route show table vrf-red
+ prohibit default
+ broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2
+ 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2
+ local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2
+ broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2
+ broadcast 10.2.2.0 dev eth2 proto kernel scope link src 10.2.2.2
+ 10.2.2.0/24 dev eth2 proto kernel scope link src 10.2.2.2
+ local 10.2.2.2 dev eth2 proto kernel scope host src 10.2.2.2
+ broadcast 10.2.2.255 dev eth2 proto kernel scope link src 10.2.2.2
+
+ $ ip -6 route show table vrf-red
+ local 2002:1:: dev lo proto none metric 0 pref medium
+ local 2002:1::2 dev lo proto none metric 0 pref medium
+ 2002:1::/120 dev eth1 proto kernel metric 256 pref medium
+ local 2002:2:: dev lo proto none metric 0 pref medium
+ local 2002:2::2 dev lo proto none metric 0 pref medium
+ 2002:2::/120 dev eth2 proto kernel metric 256 pref medium
+ local fe80:: dev lo proto none metric 0 pref medium
+ local fe80:: dev lo proto none metric 0 pref medium
+ local fe80::ff:fe00:202 dev lo proto none metric 0 pref medium
+ local fe80::ff:fe00:203 dev lo proto none metric 0 pref medium
+ fe80::/64 dev eth1 proto kernel metric 256 pref medium
+ fe80::/64 dev eth2 proto kernel metric 256 pref medium
+ ff00::/8 dev vrf-red metric 256 pref medium
+ ff00::/8 dev eth1 metric 256 pref medium
+ ff00::/8 dev eth2 metric 256 pref medium
+
+
+8. Route Lookup for a VRF
+
+ A test route lookup can be done for a VRF by adding the oif option to ip:
+ $ ip [-6] route get oif VRF-NAME ADDRESS
+
+ For example:
+ $ ip route get 10.2.1.40 oif vrf-red
+ 10.2.1.40 dev eth1 table vrf-red src 10.2.1.2
+ cache
+
+ $ ip -6 route get 2002:1::32 oif vrf-red
+ 2002:1::32 from :: dev eth1 table vrf-red proto kernel src 2002:1::2 metric 256 pref medium
+
+
+9. Removing Network Interface from a VRF
+
+ Network interfaces are removed from a VRF by breaking the enslavement to
+ the VRF device:
+ $ ip link set dev NAME nomaster
+
+ Connected routes are moved back to the default table and local entries are
+ moved to the local table.
+
+ For example:
+ $ ip link set dev eth0 nomaster
+
+--------------------------------------------------------------------------------
+
+Commands used in this example:
+
+cat >> /etc/iproute2/rt_tables <<EOF
+1 vrf-mgmt
+10 vrf-red
+66 vrf-blue
+81 vrf-green
+EOF
+
+function vrf_create
+{
+ VRF=$1
+ TBID=$2
+ # create VRF device
+ ip link add vrf-${VRF} type vrf table ${TBID}
+
+ # add rules that direct lookups to vrf table
+ ip ru add pref 200 oif vrf-${VRF} table ${TBID}
+ ip ru add pref 200 iif vrf-${VRF} table ${TBID}
+ ip -6 ru add pref 200 oif vrf-${VRF} table ${TBID}
+ ip -6 ru add pref 200 iif vrf-${VRF} table ${TBID}
+
+ if [ "${VRF}" != "mgmt" ]; then
+ ip route add table ${TBID} prohibit default
+ fi
+ ip link set dev vrf-${VRF} up
+ ip link set dev vrf-${VRF} state up
+}
+
+vrf_create mgmt 1
+ip link set dev eth0 master vrf-mgmt
+
+vrf_create red 10
+ip link set dev eth1 master vrf-red
+ip link set dev eth2 master vrf-red
+ip link set dev eth5 master vrf-red
+
+vrf_create blue 66
+ip link set dev eth3 master vrf-blue
+
+vrf_create green 81
+ip link set dev eth4 master vrf-green
+
+
+Interface addresses from /etc/network/interfaces:
+auto eth0
+iface eth0 inet static
+ address 10.0.0.2
+ netmask 255.255.255.0
+ gateway 10.0.0.254
+
+iface eth0 inet6 static
+ address 2000:1::2
+ netmask 120
+
+auto eth1
+iface eth1 inet static
+ address 10.2.1.2
+ netmask 255.255.255.0
+
+iface eth1 inet6 static
+ address 2002:1::2
+ netmask 120
+
+auto eth2
+iface eth2 inet static
+ address 10.2.2.2
+ netmask 255.255.255.0
+
+iface eth2 inet6 static
+ address 2002:2::2
+ netmask 120
+
+auto eth3
+iface eth3 inet static
+ address 10.2.3.2
+ netmask 255.255.255.0
+
+iface eth3 inet6 static
+ address 2002:3::2
+ netmask 120
+
+auto eth4
+iface eth4 inet static
+ address 10.2.4.2
+ netmask 255.255.255.0
+
+iface eth4 inet6 static
+ address 2002:4::2
+ netmask 120
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff