#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/sort.h>
#include "gianfar.h"
return 0;
}
+static int gfar_check_filer_hardware(struct gfar_private *priv)
+{
+ struct gfar __iomem *regs = NULL;
+ u32 i;
+
+ regs = priv->gfargrp[0].regs;
+
+ /* Check if we are in FIFO mode */
+ i = gfar_read(®s->ecntrl);
+ i &= ECNTRL_FIFM;
+ if (i == ECNTRL_FIFM) {
+ netdev_notice(priv->ndev, "Interface in FIFO mode\n");
+ i = gfar_read(®s->rctrl);
+ i &= RCTRL_PRSDEP_MASK | RCTRL_PRSFM;
+ if (i == (RCTRL_PRSDEP_MASK | RCTRL_PRSFM)) {
+ netdev_info(priv->ndev,
+ "Receive Queue Filtering enabled\n");
+ } else {
+ netdev_warn(priv->ndev,
+ "Receive Queue Filtering disabled\n");
+ return -EOPNOTSUPP;
+ }
+ }
+ /* Or in standard mode */
+ else {
+ i = gfar_read(®s->rctrl);
+ i &= RCTRL_PRSDEP_MASK;
+ if (i == RCTRL_PRSDEP_MASK) {
+ netdev_info(priv->ndev,
+ "Receive Queue Filtering enabled\n");
+ } else {
+ netdev_warn(priv->ndev,
+ "Receive Queue Filtering disabled\n");
+ return -EOPNOTSUPP;
+ }
+ }
+
+ /* Sets the properties for arbitrary filer rule
+ * to the first 4 Layer 4 Bytes */
+ regs->rbifx = 0xC0C1C2C3;
+ return 0;
+}
+
+static int gfar_comp_asc(const void *a, const void *b)
+{
+ return memcmp(a, b, 4);
+}
+
+static int gfar_comp_desc(const void *a, const void *b)
+{
+ return -memcmp(a, b, 4);
+}
+
+static void gfar_swap(void *a, void *b, int size)
+{
+ u32 *_a = a;
+ u32 *_b = b;
+
+ swap(_a[0], _b[0]);
+ swap(_a[1], _b[1]);
+ swap(_a[2], _b[2]);
+ swap(_a[3], _b[3]);
+}
+
+/* Write a mask to filer cache */
+static void gfar_set_mask(u32 mask, struct filer_table *tab)
+{
+ tab->fe[tab->index].ctrl = RQFCR_AND | RQFCR_PID_MASK | RQFCR_CMP_EXACT;
+ tab->fe[tab->index].prop = mask;
+ tab->index++;
+}
+
+/* Sets parse bits (e.g. IP or TCP) */
+static void gfar_set_parse_bits(u32 value, u32 mask, struct filer_table *tab)
+{
+ gfar_set_mask(mask, tab);
+ tab->fe[tab->index].ctrl = RQFCR_CMP_EXACT | RQFCR_PID_PARSE
+ | RQFCR_AND;
+ tab->fe[tab->index].prop = value;
+ tab->index++;
+}
+
+static void gfar_set_general_attribute(u32 value, u32 mask, u32 flag,
+ struct filer_table *tab)
+{
+ gfar_set_mask(mask, tab);
+ tab->fe[tab->index].ctrl = RQFCR_CMP_EXACT | RQFCR_AND | flag;
+ tab->fe[tab->index].prop = value;
+ tab->index++;
+}
+
+/*
+ * For setting a tuple of value and mask of type flag
+ * Example:
+ * IP-Src = 10.0.0.0/255.0.0.0
+ * value: 0x0A000000 mask: FF000000 flag: RQFPR_IPV4
+ *
+ * Ethtool gives us a value=0 and mask=~0 for don't care a tuple
+ * For a don't care mask it gives us a 0
+ *
+ * The check if don't care and the mask adjustment if mask=0 is done for VLAN
+ * and MAC stuff on an upper level (due to missing information on this level).
+ * For these guys we can discard them if they are value=0 and mask=0.
+ *
+ * Further the all masks are one-padded for better hardware efficiency.
+ */
+static void gfar_set_attribute(u32 value, u32 mask, u32 flag,
+ struct filer_table *tab)
+{
+ switch (flag) {
+ /* 3bit */
+ case RQFCR_PID_PRI:
+ if (!(value | mask))
+ return;
+ mask |= RQFCR_PID_PRI_MASK;
+ break;
+ /* 8bit */
+ case RQFCR_PID_L4P:
+ case RQFCR_PID_TOS:
+ if (!~(mask | RQFCR_PID_L4P_MASK))
+ return;
+ if (!mask)
+ mask = ~0;
+ else
+ mask |= RQFCR_PID_L4P_MASK;
+ break;
+ /* 12bit */
+ case RQFCR_PID_VID:
+ if (!(value | mask))
+ return;
+ mask |= RQFCR_PID_VID_MASK;
+ break;
+ /* 16bit */
+ case RQFCR_PID_DPT:
+ case RQFCR_PID_SPT:
+ case RQFCR_PID_ETY:
+ if (!~(mask | RQFCR_PID_PORT_MASK))
+ return;
+ if (!mask)
+ mask = ~0;
+ else
+ mask |= RQFCR_PID_PORT_MASK;
+ break;
+ /* 24bit */
+ case RQFCR_PID_DAH:
+ case RQFCR_PID_DAL:
+ case RQFCR_PID_SAH:
+ case RQFCR_PID_SAL:
+ if (!(value | mask))
+ return;
+ mask |= RQFCR_PID_MAC_MASK;
+ break;
+ /* for all real 32bit masks */
+ default:
+ if (!~mask)
+ return;
+ if (!mask)
+ mask = ~0;
+ break;
+ }
+ gfar_set_general_attribute(value, mask, flag, tab);
+}
+
+/* Translates value and mask for UDP, TCP or SCTP */
+static void gfar_set_basic_ip(struct ethtool_tcpip4_spec *value,
+ struct ethtool_tcpip4_spec *mask, struct filer_table *tab)
+{
+ gfar_set_attribute(value->ip4src, mask->ip4src, RQFCR_PID_SIA, tab);
+ gfar_set_attribute(value->ip4dst, mask->ip4dst, RQFCR_PID_DIA, tab);
+ gfar_set_attribute(value->pdst, mask->pdst, RQFCR_PID_DPT, tab);
+ gfar_set_attribute(value->psrc, mask->psrc, RQFCR_PID_SPT, tab);
+ gfar_set_attribute(value->tos, mask->tos, RQFCR_PID_TOS, tab);
+}
+
+/* Translates value and mask for RAW-IP4 */
+static void gfar_set_user_ip(struct ethtool_usrip4_spec *value,
+ struct ethtool_usrip4_spec *mask, struct filer_table *tab)
+{
+ gfar_set_attribute(value->ip4src, mask->ip4src, RQFCR_PID_SIA, tab);
+ gfar_set_attribute(value->ip4dst, mask->ip4dst, RQFCR_PID_DIA, tab);
+ gfar_set_attribute(value->tos, mask->tos, RQFCR_PID_TOS, tab);
+ gfar_set_attribute(value->proto, mask->proto, RQFCR_PID_L4P, tab);
+ gfar_set_attribute(value->l4_4_bytes, mask->l4_4_bytes, RQFCR_PID_ARB,
+ tab);
+
+}
+
+/* Translates value and mask for ETHER spec */
+static void gfar_set_ether(struct ethhdr *value, struct ethhdr *mask,
+ struct filer_table *tab)
+{
+ u32 upper_temp_mask = 0;
+ u32 lower_temp_mask = 0;
+ /* Source address */
+ if (!is_broadcast_ether_addr(mask->h_source)) {
+
+ if (is_zero_ether_addr(mask->h_source)) {
+ upper_temp_mask = 0xFFFFFFFF;
+ lower_temp_mask = 0xFFFFFFFF;
+ } else {
+ upper_temp_mask = mask->h_source[0] << 16
+ | mask->h_source[1] << 8
+ | mask->h_source[2];
+ lower_temp_mask = mask->h_source[3] << 16
+ | mask->h_source[4] << 8
+ | mask->h_source[5];
+ }
+ /* Upper 24bit */
+ gfar_set_attribute(
+ value->h_source[0] << 16 | value->h_source[1]
+ << 8 | value->h_source[2],
+ upper_temp_mask, RQFCR_PID_SAH, tab);
+ /* And the same for the lower part */
+ gfar_set_attribute(
+ value->h_source[3] << 16 | value->h_source[4]
+ << 8 | value->h_source[5],
+ lower_temp_mask, RQFCR_PID_SAL, tab);
+ }
+ /* Destination address */
+ if (!is_broadcast_ether_addr(mask->h_dest)) {
+
+ /* Special for destination is limited broadcast */
+ if ((is_broadcast_ether_addr(value->h_dest)
+ && is_zero_ether_addr(mask->h_dest))) {
+ gfar_set_parse_bits(RQFPR_EBC, RQFPR_EBC, tab);
+ } else {
+
+ if (is_zero_ether_addr(mask->h_dest)) {
+ upper_temp_mask = 0xFFFFFFFF;
+ lower_temp_mask = 0xFFFFFFFF;
+ } else {
+ upper_temp_mask = mask->h_dest[0] << 16
+ | mask->h_dest[1] << 8
+ | mask->h_dest[2];
+ lower_temp_mask = mask->h_dest[3] << 16
+ | mask->h_dest[4] << 8
+ | mask->h_dest[5];
+ }
+
+ /* Upper 24bit */
+ gfar_set_attribute(
+ value->h_dest[0] << 16
+ | value->h_dest[1] << 8
+ | value->h_dest[2],
+ upper_temp_mask, RQFCR_PID_DAH, tab);
+ /* And the same for the lower part */
+ gfar_set_attribute(
+ value->h_dest[3] << 16
+ | value->h_dest[4] << 8
+ | value->h_dest[5],
+ lower_temp_mask, RQFCR_PID_DAL, tab);
+ }
+ }
+
+ gfar_set_attribute(value->h_proto, mask->h_proto, RQFCR_PID_ETY, tab);
+
+}
+
+/* Convert a rule to binary filter format of gianfar */
+static int gfar_convert_to_filer(struct ethtool_rx_flow_spec *rule,
+ struct filer_table *tab)
+{
+ u32 vlan = 0, vlan_mask = 0;
+ u32 id = 0, id_mask = 0;
+ u32 cfi = 0, cfi_mask = 0;
+ u32 prio = 0, prio_mask = 0;
+
+ u32 old_index = tab->index;
+
+ /* Check if vlan is wanted */
+ if ((rule->flow_type & FLOW_EXT) && (rule->m_ext.vlan_tci != 0xFFFF)) {
+ if (!rule->m_ext.vlan_tci)
+ rule->m_ext.vlan_tci = 0xFFFF;
+
+ vlan = RQFPR_VLN;
+ vlan_mask = RQFPR_VLN;
+
+ /* Separate the fields */
+ id = rule->h_ext.vlan_tci & 0xFFF;
+ id_mask = rule->m_ext.vlan_tci & 0xFFF;
+ cfi = (rule->h_ext.vlan_tci >> 12) & 1;
+ cfi_mask = (rule->m_ext.vlan_tci >> 12) & 1;
+ prio = (rule->h_ext.vlan_tci >> 13) & 0x7;
+ prio_mask = (rule->m_ext.vlan_tci >> 13) & 0x7;
+
+ if (cfi == 1 && cfi_mask == 1) {
+ vlan |= RQFPR_CFI;
+ vlan_mask |= RQFPR_CFI;
+ } else if (cfi == 0 && cfi_mask == 1) {
+ vlan_mask |= RQFPR_CFI;
+ }
+ }
+
+ switch (rule->flow_type & ~FLOW_EXT) {
+ case TCP_V4_FLOW:
+ gfar_set_parse_bits(RQFPR_IPV4 | RQFPR_TCP | vlan,
+ RQFPR_IPV4 | RQFPR_TCP | vlan_mask, tab);
+ gfar_set_basic_ip(&rule->h_u.tcp_ip4_spec,
+ &rule->m_u.tcp_ip4_spec, tab);
+ break;
+ case UDP_V4_FLOW:
+ gfar_set_parse_bits(RQFPR_IPV4 | RQFPR_UDP | vlan,
+ RQFPR_IPV4 | RQFPR_UDP | vlan_mask, tab);
+ gfar_set_basic_ip(&rule->h_u.udp_ip4_spec,
+ &rule->m_u.udp_ip4_spec, tab);
+ break;
+ case SCTP_V4_FLOW:
+ gfar_set_parse_bits(RQFPR_IPV4 | vlan, RQFPR_IPV4 | vlan_mask,
+ tab);
+ gfar_set_attribute(132, 0, RQFCR_PID_L4P, tab);
+ gfar_set_basic_ip((struct ethtool_tcpip4_spec *) &rule->h_u,
+ (struct ethtool_tcpip4_spec *) &rule->m_u, tab);
+ break;
+ case IP_USER_FLOW:
+ gfar_set_parse_bits(RQFPR_IPV4 | vlan, RQFPR_IPV4 | vlan_mask,
+ tab);
+ gfar_set_user_ip((struct ethtool_usrip4_spec *) &rule->h_u,
+ (struct ethtool_usrip4_spec *) &rule->m_u, tab);
+ break;
+ case ETHER_FLOW:
+ if (vlan)
+ gfar_set_parse_bits(vlan, vlan_mask, tab);
+ gfar_set_ether((struct ethhdr *) &rule->h_u,
+ (struct ethhdr *) &rule->m_u, tab);
+ break;
+ default:
+ return -1;
+ }
+
+ /* Set the vlan attributes in the end */
+ if (vlan) {
+ gfar_set_attribute(id, id_mask, RQFCR_PID_VID, tab);
+ gfar_set_attribute(prio, prio_mask, RQFCR_PID_PRI, tab);
+ }
+
+ /* If there has been nothing written till now, it must be a default */
+ if (tab->index == old_index) {
+ gfar_set_mask(0xFFFFFFFF, tab);
+ tab->fe[tab->index].ctrl = 0x20;
+ tab->fe[tab->index].prop = 0x0;
+ tab->index++;
+ }
+
+ /* Remove last AND */
+ tab->fe[tab->index - 1].ctrl &= (~RQFCR_AND);
+
+ /* Specify which queue to use or to drop */
+ if (rule->ring_cookie == RX_CLS_FLOW_DISC)
+ tab->fe[tab->index - 1].ctrl |= RQFCR_RJE;
+ else
+ tab->fe[tab->index - 1].ctrl |= (rule->ring_cookie << 10);
+
+ /* Only big enough entries can be clustered */
+ if (tab->index > (old_index + 2)) {
+ tab->fe[old_index + 1].ctrl |= RQFCR_CLE;
+ tab->fe[tab->index - 1].ctrl |= RQFCR_CLE;
+ }
+
+ /* In rare cases the cache can be full while there is free space in hw */
+ if (tab->index > MAX_FILER_CACHE_IDX - 1)
+ return -EBUSY;
+
+ return 0;
+}
+
+/* Copy size filer entries */
+static void gfar_copy_filer_entries(struct gfar_filer_entry dst[0],
+ struct gfar_filer_entry src[0], s32 size)
+{
+ while (size > 0) {
+ size--;
+ dst[size].ctrl = src[size].ctrl;
+ dst[size].prop = src[size].prop;
+ }
+}
+
+/* Delete the contents of the filer-table between start and end
+ * and collapse them */
+static int gfar_trim_filer_entries(u32 begin, u32 end, struct filer_table *tab)
+{
+ int length;
+ if (end > MAX_FILER_CACHE_IDX || end < begin)
+ return -EINVAL;
+
+ end++;
+ length = end - begin;
+
+ /* Copy */
+ while (end < tab->index) {
+ tab->fe[begin].ctrl = tab->fe[end].ctrl;
+ tab->fe[begin++].prop = tab->fe[end++].prop;
+
+ }
+ /* Fill up with don't cares */
+ while (begin < tab->index) {
+ tab->fe[begin].ctrl = 0x60;
+ tab->fe[begin].prop = 0xFFFFFFFF;
+ begin++;
+ }
+
+ tab->index -= length;
+ return 0;
+}
+
+/* Make space on the wanted location */
+static int gfar_expand_filer_entries(u32 begin, u32 length,
+ struct filer_table *tab)
+{
+ if (length == 0 || length + tab->index > MAX_FILER_CACHE_IDX || begin
+ > MAX_FILER_CACHE_IDX)
+ return -EINVAL;
+
+ gfar_copy_filer_entries(&(tab->fe[begin + length]), &(tab->fe[begin]),
+ tab->index - length + 1);
+
+ tab->index += length;
+ return 0;
+}
+
+static int gfar_get_next_cluster_start(int start, struct filer_table *tab)
+{
+ for (; (start < tab->index) && (start < MAX_FILER_CACHE_IDX - 1); start++) {
+ if ((tab->fe[start].ctrl & (RQFCR_AND | RQFCR_CLE))
+ == (RQFCR_AND | RQFCR_CLE))
+ return start;
+ }
+ return -1;
+}
+
+static int gfar_get_next_cluster_end(int start, struct filer_table *tab)
+{
+ for (; (start < tab->index) && (start < MAX_FILER_CACHE_IDX - 1); start++) {
+ if ((tab->fe[start].ctrl & (RQFCR_AND | RQFCR_CLE))
+ == (RQFCR_CLE))
+ return start;
+ }
+ return -1;
+}
+
+/*
+ * Uses hardwares clustering option to reduce
+ * the number of filer table entries
+ */
+static void gfar_cluster_filer(struct filer_table *tab)
+{
+ s32 i = -1, j, iend, jend;
+
+ while ((i = gfar_get_next_cluster_start(++i, tab)) != -1) {
+ j = i;
+ while ((j = gfar_get_next_cluster_start(++j, tab)) != -1) {
+ /*
+ * The cluster entries self and the previous one
+ * (a mask) must be identical!
+ */
+ if (tab->fe[i].ctrl != tab->fe[j].ctrl)
+ break;
+ if (tab->fe[i].prop != tab->fe[j].prop)
+ break;
+ if (tab->fe[i - 1].ctrl != tab->fe[j - 1].ctrl)
+ break;
+ if (tab->fe[i - 1].prop != tab->fe[j - 1].prop)
+ break;
+ iend = gfar_get_next_cluster_end(i, tab);
+ jend = gfar_get_next_cluster_end(j, tab);
+ if (jend == -1 || iend == -1)
+ break;
+ /*
+ * First we make some free space, where our cluster
+ * element should be. Then we copy it there and finally
+ * delete in from its old location.
+ */
+
+ if (gfar_expand_filer_entries(iend, (jend - j), tab)
+ == -EINVAL)
+ break;
+
+ gfar_copy_filer_entries(&(tab->fe[iend + 1]),
+ &(tab->fe[jend + 1]), jend - j);
+
+ if (gfar_trim_filer_entries(jend - 1,
+ jend + (jend - j), tab) == -EINVAL)
+ return;
+
+ /* Mask out cluster bit */
+ tab->fe[iend].ctrl &= ~(RQFCR_CLE);
+ }
+ }
+}
+
+/* Swaps the 0xFF80 masked bits of a1<>a2 and b1<>b2 */
+static void gfar_swap_ff80_bits(struct gfar_filer_entry *a1,
+ struct gfar_filer_entry *a2, struct gfar_filer_entry *b1,
+ struct gfar_filer_entry *b2)
+{
+ u32 temp[4];
+ temp[0] = a1->ctrl & 0xFF80;
+ temp[1] = a2->ctrl & 0xFF80;
+ temp[2] = b1->ctrl & 0xFF80;
+ temp[3] = b2->ctrl & 0xFF80;
+
+ a1->ctrl &= ~0xFF80;
+ a2->ctrl &= ~0xFF80;
+ b1->ctrl &= ~0xFF80;
+ b2->ctrl &= ~0xFF80;
+
+ a1->ctrl |= temp[1];
+ a2->ctrl |= temp[0];
+ b1->ctrl |= temp[3];
+ b2->ctrl |= temp[2];
+}
+
+/*
+ * Generate a list consisting of masks values with their start and
+ * end of validity and block as indicator for parts belonging
+ * together (glued by ANDs) in mask_table
+ */
+static u32 gfar_generate_mask_table(struct gfar_mask_entry *mask_table,
+ struct filer_table *tab)
+{
+ u32 i, and_index = 0, block_index = 1;
+
+ for (i = 0; i < tab->index; i++) {
+
+ /* LSByte of control = 0 sets a mask */
+ if (!(tab->fe[i].ctrl & 0xF)) {
+ mask_table[and_index].mask = tab->fe[i].prop;
+ mask_table[and_index].start = i;
+ mask_table[and_index].block = block_index;
+ if (and_index >= 1)
+ mask_table[and_index - 1].end = i - 1;
+ and_index++;
+ }
+ /* cluster starts will be separated because they should
+ * hold their position */
+ if (tab->fe[i].ctrl & RQFCR_CLE)
+ block_index++;
+ /* A not set AND indicates the end of a depended block */
+ if (!(tab->fe[i].ctrl & RQFCR_AND))
+ block_index++;
+
+ }
+
+ mask_table[and_index - 1].end = i - 1;
+
+ return and_index;
+}
+
+/*
+ * Sorts the entries of mask_table by the values of the masks.
+ * Important: The 0xFF80 flags of the first and last entry of a
+ * block must hold their position (which queue, CLusterEnable, ReJEct,
+ * AND)
+ */
+static void gfar_sort_mask_table(struct gfar_mask_entry *mask_table,
+ struct filer_table *temp_table, u32 and_index)
+{
+ /* Pointer to compare function (_asc or _desc) */
+ int (*gfar_comp)(const void *, const void *);
+
+ u32 i, size = 0, start = 0, prev = 1;
+ u32 old_first, old_last, new_first, new_last;
+
+ gfar_comp = &gfar_comp_desc;
+
+ for (i = 0; i < and_index; i++) {
+
+ if (prev != mask_table[i].block) {
+ old_first = mask_table[start].start + 1;
+ old_last = mask_table[i - 1].end;
+ sort(mask_table + start, size,
+ sizeof(struct gfar_mask_entry),
+ gfar_comp, &gfar_swap);
+
+ /* Toggle order for every block. This makes the
+ * thing more efficient! */
+ if (gfar_comp == gfar_comp_desc)
+ gfar_comp = &gfar_comp_asc;
+ else
+ gfar_comp = &gfar_comp_desc;
+
+ new_first = mask_table[start].start + 1;
+ new_last = mask_table[i - 1].end;
+
+ gfar_swap_ff80_bits(&temp_table->fe[new_first],
+ &temp_table->fe[old_first],
+ &temp_table->fe[new_last],
+ &temp_table->fe[old_last]);
+
+ start = i;
+ size = 0;
+ }
+ size++;
+ prev = mask_table[i].block;
+ }
+
+}
+
+/*
+ * Reduces the number of masks needed in the filer table to save entries
+ * This is done by sorting the masks of a depended block. A depended block is
+ * identified by gluing ANDs or CLE. The sorting order toggles after every
+ * block. Of course entries in scope of a mask must change their location with
+ * it.
+ */
+static int gfar_optimize_filer_masks(struct filer_table *tab)
+{
+ struct filer_table *temp_table;
+ struct gfar_mask_entry *mask_table;
+
+ u32 and_index = 0, previous_mask = 0, i = 0, j = 0, size = 0;
+ s32 ret = 0;
+
+ /* We need a copy of the filer table because
+ * we want to change its order */
+ temp_table = kmalloc(sizeof(*temp_table), GFP_KERNEL);
+ if (temp_table == NULL)
+ return -ENOMEM;
+ memcpy(temp_table, tab, sizeof(*temp_table));
+
+ mask_table = kcalloc(MAX_FILER_CACHE_IDX / 2 + 1,
+ sizeof(struct gfar_mask_entry), GFP_KERNEL);
+
+ if (mask_table == NULL) {
+ ret = -ENOMEM;
+ goto end;
+ }
+
+ and_index = gfar_generate_mask_table(mask_table, tab);
+
+ gfar_sort_mask_table(mask_table, temp_table, and_index);
+
+ /* Now we can copy the data from our duplicated filer table to
+ * the real one in the order the mask table says */
+ for (i = 0; i < and_index; i++) {
+ size = mask_table[i].end - mask_table[i].start + 1;
+ gfar_copy_filer_entries(&(tab->fe[j]),
+ &(temp_table->fe[mask_table[i].start]), size);
+ j += size;
+ }
+
+ /* And finally we just have to check for duplicated masks and drop the
+ * second ones */
+ for (i = 0; i < tab->index && i < MAX_FILER_CACHE_IDX; i++) {
+ if (tab->fe[i].ctrl == 0x80) {
+ previous_mask = i++;
+ break;
+ }
+ }
+ for (; i < tab->index && i < MAX_FILER_CACHE_IDX; i++) {
+ if (tab->fe[i].ctrl == 0x80) {
+ if (tab->fe[i].prop == tab->fe[previous_mask].prop) {
+ /* Two identical ones found!
+ * So drop the second one! */
+ gfar_trim_filer_entries(i, i, tab);
+ } else
+ /* Not identical! */
+ previous_mask = i;
+ }
+ }
+
+ kfree(mask_table);
+end: kfree(temp_table);
+ return ret;
+}
+
+/* Write the bit-pattern from software's buffer to hardware registers */
+static int gfar_write_filer_table(struct gfar_private *priv,
+ struct filer_table *tab)
+{
+ u32 i = 0;
+ if (tab->index > MAX_FILER_IDX - 1)
+ return -EBUSY;
+
+ /* Avoid inconsistent filer table to be processed */
+ lock_rx_qs(priv);
+
+ /* Fill regular entries */
+ for (; i < MAX_FILER_IDX - 1 && (tab->fe[i].ctrl | tab->fe[i].ctrl); i++)
+ gfar_write_filer(priv, i, tab->fe[i].ctrl, tab->fe[i].prop);
+ /* Fill the rest with fall-troughs */
+ for (; i < MAX_FILER_IDX - 1; i++)
+ gfar_write_filer(priv, i, 0x60, 0xFFFFFFFF);
+ /* Last entry must be default accept
+ * because that's what people expect */
+ gfar_write_filer(priv, i, 0x20, 0x0);
+
+ unlock_rx_qs(priv);
+
+ return 0;
+}
+
+static int gfar_check_capability(struct ethtool_rx_flow_spec *flow,
+ struct gfar_private *priv)
+{
+
+ if (flow->flow_type & FLOW_EXT) {
+ if (~flow->m_ext.data[0] || ~flow->m_ext.data[1])
+ netdev_warn(priv->ndev,
+ "User-specific data not supported!\n");
+ if (~flow->m_ext.vlan_etype)
+ netdev_warn(priv->ndev,
+ "VLAN-etype not supported!\n");
+ }
+ if (flow->flow_type == IP_USER_FLOW)
+ if (flow->h_u.usr_ip4_spec.ip_ver != ETH_RX_NFC_IP4)
+ netdev_warn(priv->ndev,
+ "IP-Version differing from IPv4 not supported!\n");
+
+ return 0;
+}
+
+static int gfar_process_filer_changes(struct gfar_private *priv)
+{
+ struct ethtool_flow_spec_container *j;
+ struct filer_table *tab;
+ s32 i = 0;
+ s32 ret = 0;
+
+ /* So index is set to zero, too! */
+ tab = kzalloc(sizeof(*tab), GFP_KERNEL);
+ if (tab == NULL)
+ return -ENOMEM;
+
+ /* Now convert the existing filer data from flow_spec into
+ * filer tables binary format */
+ list_for_each_entry(j, &priv->rx_list.list, list) {
+ ret = gfar_convert_to_filer(&j->fs, tab);
+ if (ret == -EBUSY) {
+ netdev_err(priv->ndev, "Rule not added: No free space!\n");
+ goto end;
+ }
+ if (ret == -1) {
+ netdev_err(priv->ndev, "Rule not added: Unsupported Flow-type!\n");
+ goto end;
+ }
+ }
+
+ i = tab->index;
+
+ /* Optimizations to save entries */
+ gfar_cluster_filer(tab);
+ gfar_optimize_filer_masks(tab);
+
+ pr_debug("\n\tSummary:\n"
+ "\tData on hardware: %d\n"
+ "\tCompression rate: %d%%\n",
+ tab->index, 100 - (100 * tab->index) / i);
+
+ /* Write everything to hardware */
+ ret = gfar_write_filer_table(priv, tab);
+ if (ret == -EBUSY) {
+ netdev_err(priv->ndev, "Rule not added: No free space!\n");
+ goto end;
+ }
+
+end: kfree(tab);
+ return ret;
+}
+
+static void gfar_invert_masks(struct ethtool_rx_flow_spec *flow)
+{
+ u32 i = 0;
+
+ for (i = 0; i < sizeof(flow->m_u); i++)
+ flow->m_u.hdata[i] ^= 0xFF;
+
+ flow->m_ext.vlan_etype ^= 0xFFFF;
+ flow->m_ext.vlan_tci ^= 0xFFFF;
+ flow->m_ext.data[0] ^= ~0;
+ flow->m_ext.data[1] ^= ~0;
+}
+
+static int gfar_add_cls(struct gfar_private *priv,
+ struct ethtool_rx_flow_spec *flow)
+{
+ struct ethtool_flow_spec_container *temp, *comp;
+ int ret = 0;
+
+ temp = kmalloc(sizeof(*temp), GFP_KERNEL);
+ if (temp == NULL)
+ return -ENOMEM;
+ memcpy(&temp->fs, flow, sizeof(temp->fs));
+
+ gfar_invert_masks(&temp->fs);
+ ret = gfar_check_capability(&temp->fs, priv);
+ if (ret)
+ goto clean_mem;
+ /* Link in the new element at the right @location */
+ if (list_empty(&priv->rx_list.list)) {
+ ret = gfar_check_filer_hardware(priv);
+ if (ret != 0)
+ goto clean_mem;
+ list_add(&temp->list, &priv->rx_list.list);
+ goto process;
+ } else {
+
+ list_for_each_entry(comp, &priv->rx_list.list, list) {
+ if (comp->fs.location > flow->location) {
+ list_add_tail(&temp->list, &comp->list);
+ goto process;
+ }
+ if (comp->fs.location == flow->location) {
+ netdev_err(priv->ndev,
+ "Rule not added: ID %d not free!\n",
+ flow->location);
+ ret = -EBUSY;
+ goto clean_mem;
+ }
+ }
+ list_add_tail(&temp->list, &priv->rx_list.list);
+ }
+
+process:
+ ret = gfar_process_filer_changes(priv);
+ if (ret)
+ goto clean_list;
+ priv->rx_list.count++;
+ return ret;
+
+clean_list:
+ list_del(&temp->list);
+clean_mem:
+ kfree(temp);
+ return ret;
+}
+
+static int gfar_del_cls(struct gfar_private *priv, u32 loc)
+{
+ struct ethtool_flow_spec_container *comp;
+ u32 ret = -EINVAL;
+
+ if (list_empty(&priv->rx_list.list))
+ return ret;
+
+ list_for_each_entry(comp, &priv->rx_list.list, list) {
+ if (comp->fs.location == loc) {
+ list_del(&comp->list);
+ kfree(comp);
+ priv->rx_list.count--;
+ gfar_process_filer_changes(priv);
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+
+}
+
+static int gfar_get_cls(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
+{
+ struct ethtool_flow_spec_container *comp;
+ u32 ret = -EINVAL;
+
+ list_for_each_entry(comp, &priv->rx_list.list, list) {
+ if (comp->fs.location == cmd->fs.location) {
+ memcpy(&cmd->fs, &comp->fs, sizeof(cmd->fs));
+ gfar_invert_masks(&cmd->fs);
+ ret = 0;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int gfar_get_cls_all(struct gfar_private *priv,
+ struct ethtool_rxnfc *cmd, u32 *rule_locs)
+{
+ struct ethtool_flow_spec_container *comp;
+ u32 i = 0;
+
+ list_for_each_entry(comp, &priv->rx_list.list, list) {
+ if (i <= cmd->rule_cnt) {
+ rule_locs[i] = comp->fs.location;
+ i++;
+ }
+ }
+
+ cmd->data = MAX_FILER_IDX;
+
+ return 0;
+}
+
static int gfar_set_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
{
struct gfar_private *priv = netdev_priv(dev);
int ret = 0;
- switch(cmd->cmd) {
+ mutex_lock(&priv->rx_queue_access);
+
+ switch (cmd->cmd) {
case ETHTOOL_SRXFH:
ret = gfar_set_hash_opts(priv, cmd);
break;
+ case ETHTOOL_SRXCLSRLINS:
+ if (cmd->fs.ring_cookie != RX_CLS_FLOW_DISC &&
+ cmd->fs.ring_cookie >= priv->num_rx_queues) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = gfar_add_cls(priv, &cmd->fs);
+ break;
+ case ETHTOOL_SRXCLSRLDEL:
+ ret = gfar_del_cls(priv, cmd->fs.location);
+ break;
default:
ret = -EINVAL;
}
+ mutex_unlock(&priv->rx_queue_access);
+
+ return ret;
+}
+
+static int gfar_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+ void *rule_locs)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ int ret = 0;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_GRXRINGS:
+ cmd->data = priv->num_rx_queues;
+ break;
+ case ETHTOOL_GRXCLSRLCNT:
+ cmd->rule_cnt = priv->rx_list.count;
+ break;
+ case ETHTOOL_GRXCLSRULE:
+ ret = gfar_get_cls(priv, cmd);
+ break;
+ case ETHTOOL_GRXCLSRLALL:
+ ret = gfar_get_cls_all(priv, cmd, (u32 *) rule_locs);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
return ret;
}
.set_wol = gfar_set_wol,
#endif
.set_rxnfc = gfar_set_nfc,
+ .get_rxnfc = gfar_get_nfc,
};
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff