"device driver"
#define DRIVER_NAME "mceusb"
-#define USB_BUFLEN 32 /* USB reception buffer length */
-#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
-#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
+#define USB_BUFLEN 32 /* USB reception buffer length */
+#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
+#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
/* MCE constants */
-#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
-#define MCE_TIME_UNIT 50 /* Approx 50us resolution */
-#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */
-#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */
-#define MCE_PACKET_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
-#define MCE_CONTROL_HEADER 0x9f /* MCE status header */
-#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
-#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
-#define MCE_DEFAULT_TX_MASK 0x03 /* Val opts: TX1=0x01, TX2=0x02, ALL=0x03 */
-#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */
-#define MCE_PULSE_MASK 0x7f /* Pulse mask */
-#define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */
-#define MCE_COMMAND_MASK 0xe0 /* Mask out command bits */
-#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
-#define MCE_COMMAND_IRDATA 0x80 /* buf & MCE_COMMAND_MASK == 0x80 -> IR data */
+#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
+#define MCE_TIME_UNIT 50 /* Approx 50us resolution */
+#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */
+#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */
+#define MCE_IRDATA_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
+#define MCE_IRDATA_TRAILER 0x80 /* End of IR data */
+#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
+#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
+#define MCE_DEFAULT_TX_MASK 0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */
+#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */
+#define MCE_PULSE_MASK 0x7f /* Pulse mask */
+#define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */
+
+#define MCE_HW_CMD_HEADER 0xff /* MCE hardware command header */
+#define MCE_COMMAND_HEADER 0x9f /* MCE command header */
+#define MCE_COMMAND_MASK 0xe0 /* Mask out command bits */
+#define MCE_COMMAND_NULL 0x00 /* These show up various places... */
+/* if buf[i] & MCE_COMMAND_MASK == 0x80 and buf[i] != MCE_COMMAND_HEADER,
+ * then we're looking at a raw IR data sample */
+#define MCE_COMMAND_IRDATA 0x80
+#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
+
+/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
+#define MCE_CMD_PING 0x03 /* Ping device */
+#define MCE_CMD_UNKNOWN 0x04 /* Unknown */
+#define MCE_CMD_UNKNOWN2 0x05 /* Unknown */
+#define MCE_CMD_S_CARRIER 0x06 /* Set TX carrier frequency */
+#define MCE_CMD_G_CARRIER 0x07 /* Get TX carrier frequency */
+#define MCE_CMD_S_TXMASK 0x08 /* Set TX port bitmask */
+#define MCE_CMD_UNKNOWN3 0x09 /* Unknown */
+#define MCE_CMD_UNKNOWN4 0x0a /* Unknown */
+#define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */
+#define MCE_CMD_S_TIMEOUT 0x0c /* Set RX timeout value */
+#define MCE_CMD_G_TIMEOUT 0x0d /* Get RX timeout value */
+#define MCE_CMD_UNKNOWN5 0x0e /* Unknown */
+#define MCE_CMD_UNKNOWN6 0x0f /* Unknown */
+#define MCE_CMD_G_RXPORTSTS 0x11 /* Get RX port status */
+#define MCE_CMD_G_TXMASK 0x13 /* Set TX port bitmask */
+#define MCE_CMD_S_RXSENSOR 0x14 /* Set RX sensor (std/learning) */
+#define MCE_CMD_G_RXSENSOR 0x15 /* Get RX sensor (std/learning) */
+#define MCE_CMD_TX_PORTS 0x16 /* Get number of TX ports */
+#define MCE_CMD_G_WAKESRC 0x17 /* Get wake source */
+#define MCE_CMD_UNKNOWN7 0x18 /* Unknown */
+#define MCE_CMD_UNKNOWN8 0x19 /* Unknown */
+#define MCE_CMD_UNKNOWN9 0x1b /* Unknown */
+#define MCE_CMD_DEVICE_RESET 0xaa /* Reset the hardware */
+#define MCE_RSP_CMD_INVALID 0xfe /* Invalid command issued */
/* module parameters */
* - SET_RX_TIMEOUT sets the receiver timeout
* - SET_RX_SENSOR sets which receiver sensor to use
*/
-static char DEVICE_RESET[] = {0x00, 0xff, 0xaa};
-static char GET_REVISION[] = {0xff, 0x0b};
-static char GET_UNKNOWN[] = {0xff, 0x18};
-static char GET_UNKNOWN2[] = {MCE_CONTROL_HEADER, 0x05};
-static char GET_CARRIER_FREQ[] = {MCE_CONTROL_HEADER, 0x07};
-static char GET_RX_TIMEOUT[] = {MCE_CONTROL_HEADER, 0x0d};
-static char GET_TX_BITMASK[] = {MCE_CONTROL_HEADER, 0x13};
-static char GET_RX_SENSOR[] = {MCE_CONTROL_HEADER, 0x15};
+static char DEVICE_RESET[] = {MCE_COMMAND_NULL, MCE_HW_CMD_HEADER,
+ MCE_CMD_DEVICE_RESET};
+static char GET_REVISION[] = {MCE_HW_CMD_HEADER, MCE_CMD_G_REVISION};
+static char GET_UNKNOWN[] = {MCE_HW_CMD_HEADER, MCE_CMD_UNKNOWN7};
+static char GET_UNKNOWN2[] = {MCE_COMMAND_HEADER, MCE_CMD_UNKNOWN2};
+static char GET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER, MCE_CMD_G_CARRIER};
+static char GET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TIMEOUT};
+static char GET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TXMASK};
+static char GET_RX_SENSOR[] = {MCE_COMMAND_HEADER, MCE_CMD_G_RXSENSOR};
/* sub in desired values in lower byte or bytes for full command */
/* FIXME: make use of these for transmit.
-static char SET_CARRIER_FREQ[] = {MCE_CONTROL_HEADER, 0x06, 0x00, 0x00};
-static char SET_TX_BITMASK[] = {MCE_CONTROL_HEADER, 0x08, 0x00};
-static char SET_RX_TIMEOUT[] = {MCE_CONTROL_HEADER, 0x0c, 0x00, 0x00};
-static char SET_RX_SENSOR[] = {MCE_CONTROL_HEADER, 0x14, 0x00};
+static char SET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER,
+ MCE_CMD_S_CARRIER, 0x00, 0x00};
+static char SET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_S_TXMASK, 0x00};
+static char SET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER,
+ MCE_CMD_S_TIMEOUT, 0x00, 0x00};
+static char SET_RX_SENSOR[] = {MCE_COMMAND_HEADER,
+ MCE_CMD_S_RXSENSOR, 0x00};
*/
static int mceusb_cmdsize(u8 cmd, u8 subcmd)
int datasize = 0;
switch (cmd) {
- case 0x00:
- if (subcmd == 0xff)
+ case MCE_COMMAND_NULL:
+ if (subcmd == MCE_HW_CMD_HEADER)
datasize = 1;
break;
- case 0xff:
+ case MCE_HW_CMD_HEADER:
switch (subcmd) {
- case 0x0b:
+ case MCE_CMD_G_REVISION:
datasize = 2;
break;
}
- case MCE_CONTROL_HEADER:
+ case MCE_COMMAND_HEADER:
switch (subcmd) {
- case 0x04:
- case 0x06:
- case 0x0c:
- case 0x15:
+ case MCE_CMD_UNKNOWN:
+ case MCE_CMD_S_CARRIER:
+ case MCE_CMD_S_TIMEOUT:
+ case MCE_CMD_G_RXSENSOR:
datasize = 2;
break;
- case 0x08:
- case 0x14:
+ case MCE_CMD_S_TXMASK:
+ case MCE_CMD_S_RXSENSOR:
datasize = 1;
break;
}
return;
for (i = 0; i < len && i < USB_BUFLEN; i++)
- snprintf(codes + i * 3, 4, "%02x ", buf[i] & 0xFF);
+ snprintf(codes + i * 3, 4, "%02x ", buf[i] & 0xff);
dev_info(dev, "%sx data: %s (length=%d)\n",
(out ? "t" : "r"), codes, len);
data2 = buf[idx + 3] & 0xff;
switch (cmd) {
- case 0x00:
- if (subcmd == 0xff && data1 == 0xaa)
+ case MCE_COMMAND_NULL:
+ if ((subcmd == MCE_HW_CMD_HEADER) &&
+ (data1 == MCE_CMD_DEVICE_RESET))
dev_info(dev, "Device reset requested\n");
else
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
break;
- case 0xff:
+ case MCE_HW_CMD_HEADER:
switch (subcmd) {
- case 0x0b:
+ case MCE_CMD_G_REVISION:
if (len == 2)
dev_info(dev, "Get hw/sw rev?\n");
else
"0x%02x 0x%02x\n", data1, data2,
buf[idx + 4], buf[idx + 5]);
break;
- case 0xaa:
+ case MCE_CMD_DEVICE_RESET:
dev_info(dev, "Device reset requested\n");
break;
- case 0xfe:
+ case MCE_RSP_CMD_INVALID:
dev_info(dev, "Previous command not supported\n");
break;
- case 0x18:
- case 0x1b:
+ case MCE_CMD_UNKNOWN7:
+ case MCE_CMD_UNKNOWN9:
default:
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
break;
}
break;
- case MCE_CONTROL_HEADER:
+ case MCE_COMMAND_HEADER:
switch (subcmd) {
- case 0x03:
+ case MCE_CMD_PING:
dev_info(dev, "Ping\n");
break;
- case 0x04:
+ case MCE_CMD_UNKNOWN:
dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
data1, data2);
break;
- case 0x06:
+ case MCE_CMD_S_CARRIER:
dev_info(dev, "%s carrier mode and freq of "
"0x%02x 0x%02x\n", inout, data1, data2);
break;
- case 0x07:
+ case MCE_CMD_G_CARRIER:
dev_info(dev, "Get carrier mode and freq\n");
break;
- case 0x08:
+ case MCE_CMD_S_TXMASK:
dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
inout, data1);
break;
- case 0x0c:
+ case MCE_CMD_S_TIMEOUT:
/* value is in units of 50us, so x*50/100 or x/2 ms */
dev_info(dev, "%s receive timeout of %d ms\n",
inout, ((data1 << 8) | data2) / 2);
break;
- case 0x0d:
+ case MCE_CMD_G_TIMEOUT:
dev_info(dev, "Get receive timeout\n");
break;
- case 0x13:
+ case MCE_CMD_G_TXMASK:
dev_info(dev, "Get transmit blaster mask\n");
break;
- case 0x14:
+ case MCE_CMD_S_RXSENSOR:
dev_info(dev, "%s %s-range receive sensor in use\n",
inout, data1 == 0x02 ? "short" : "long");
break;
- case 0x15:
+ case MCE_CMD_G_RXSENSOR:
if (len == 2)
dev_info(dev, "Get receive sensor\n");
else
dev_info(dev, "Received pulse count is %d\n",
((data1 << 8) | data2));
break;
- case 0xfe:
+ case MCE_RSP_CMD_INVALID:
dev_info(dev, "Error! Hardware is likely wedged...\n");
break;
- case 0x05:
- case 0x09:
- case 0x0f:
+ case MCE_CMD_UNKNOWN2:
+ case MCE_CMD_UNKNOWN3:
+ case MCE_CMD_UNKNOWN5:
default:
dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
cmd, subcmd);
return -ENOMEM;
/* MCE tx init header */
- cmdbuf[cmdcount++] = MCE_CONTROL_HEADER;
- cmdbuf[cmdcount++] = 0x08;
+ cmdbuf[cmdcount++] = MCE_COMMAND_HEADER;
+ cmdbuf[cmdcount++] = MCE_CMD_S_TXMASK;
cmdbuf[cmdcount++] = ir->tx_mask;
/* Generate mce packet data */
if ((cmdcount < MCE_CMDBUF_SIZE) &&
(cmdcount - MCE_TX_HEADER_LENGTH) %
MCE_CODE_LENGTH == 0)
- cmdbuf[cmdcount++] = MCE_PACKET_HEADER;
+ cmdbuf[cmdcount++] = MCE_IRDATA_HEADER;
/* Insert mce packet data */
if (cmdcount < MCE_CMDBUF_SIZE)
/* Fix packet length in last header */
cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
- 0x80 + (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH - 1;
+ MCE_COMMAND_IRDATA + (cmdcount - MCE_TX_HEADER_LENGTH) %
+ MCE_CODE_LENGTH - 1;
/* Check if we have room for the empty packet at the end */
if (cmdcount >= MCE_CMDBUF_SIZE) {
}
/* All mce commands end with an empty packet (0x80) */
- cmdbuf[cmdcount++] = 0x80;
+ cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER;
/* Transmit the command to the mce device */
mce_async_out(ir, cmdbuf, cmdcount);
struct mceusb_dev *ir = priv;
if (ir->flags.tx_mask_inverted)
- ir->tx_mask = (mask != 0x03 ? mask ^ 0x03 : mask) << 1;
+ ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
+ mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
else
ir->tx_mask = mask;
struct mceusb_dev *ir = priv;
int clk = 10000000;
int prescaler = 0, divisor = 0;
- unsigned char cmdbuf[4] = { MCE_CONTROL_HEADER, 0x06, 0x00, 0x00 };
+ unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
+ MCE_CMD_S_CARRIER, 0x00, 0x00 };
/* Carrier has changed */
if (ir->carrier != carrier) {
if (carrier == 0) {
ir->carrier = carrier;
cmdbuf[2] = 0x01;
- cmdbuf[3] = 0x80;
+ cmdbuf[3] = MCE_IRDATA_TRAILER;
dev_dbg(ir->dev, "%s: disabling carrier "
"modulation\n", __func__);
mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
for (prescaler = 0; prescaler < 4; ++prescaler) {
divisor = (clk >> (2 * prescaler)) / carrier;
- if (divisor <= 0xFF) {
+ if (divisor <= 0xff) {
ir->carrier = carrier;
cmdbuf[2] = prescaler;
cmdbuf[3] = divisor;
/* decode mce packets of the form (84),AA,BB,CC,DD */
/* IR data packets can span USB messages - rem */
ir->cmd = ir->buf_in[i];
- if ((ir->cmd == MCE_CONTROL_HEADER) ||
- ((ir->cmd & MCE_COMMAND_MASK) != MCE_COMMAND_IRDATA)) {
+ if ((ir->cmd == MCE_COMMAND_HEADER) ||
+ ((ir->cmd & MCE_COMMAND_MASK) !=
+ MCE_COMMAND_IRDATA)) {
ir->parser_state = SUBCMD;
continue;
}
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff