[media] tm6000: rewrite IR support
authorMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 29 Nov 2011 14:30:30 +0000 (11:30 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 30 Nov 2011 16:54:11 +0000 (14:54 -0200)
The IR support were broken on my tests with HVR-900H. Also,
there were several issues on the current implementation.
This patch is a major rewrite of the IR support for this
- Improve debug messages;
- Don't do polling for interrrupt based IR;
- Add proper support for RC-5 protocol;
- Always provide 16 bits for NEC and RC-5;
- Fix polling code;
- Split polling functions from URB Interrupt ones;
- Don't hardcode the XTAL reference for tm6000 IR;
- If a URB submit fails, retries after 100ms;
- etc.

Tested on Hauppauge HVR-900H, with RC-5 and NEC remotes.

Issues on IR handling, on this device:
- Repeat events aren't detected (neither on NEC or RC-5);
- NEC codes are always provided with 16 bits.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/tm6000/tm6000-core.c
drivers/media/video/tm6000/tm6000-input.c

index 6c1fdb5aa2460321465d87513d120561d9e7ab2b..fa37b5fc7b2ac449b3438e8809def6292ae6b1fa 100644 (file)
@@ -541,7 +541,7 @@ static struct reg_init tm6010_init_tab[] = {
        { TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20 },
        { TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0 },
        { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 },
-       { TM6010_REQ07_RD8_IR, 0x2f },
+       { TM6010_REQ07_RD8_IR, 0x0f },
 
        /* set remote wakeup key:any key wakeup */
        { TM6010_REQ07_RE5_REMOTE_WAKEUP,  0xfe },
index 8b07b726d775ffa81b86480b22a4065f3247c330..6eaf7705e73afd89df399e88f83f1b9907f07bb9 100644 (file)
 
 static unsigned int ir_debug;
 module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug, "enable debug message [IR]");
+MODULE_PARM_DESC(ir_debug, "debug message level");
 
 static unsigned int enable_ir = 1;
 module_param(enable_ir, int, 0644);
 MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
 
-/* number of 50ms for ON-OFF-ON power led */
-/* show IR activity */
-#define PWLED_OFF 2
+static unsigned int ir_clock_mhz = 12;
+module_param(ir_clock_mhz, int, 0644);
+MODULE_PARM_DESC(enable_ir, "ir clock, in MHz");
+
+#define URB_SUBMIT_DELAY       100     /* ms - Delay to submit an URB request on retrial and init */
+#define URB_INT_LED_DELAY      100     /* ms - Delay to turn led on again on int mode */
 
 #undef dprintk
 
-#define dprintk(fmt, arg...) \
-       if (ir_debug) { \
+#define dprintk(level, fmt, arg...) do {\
+       if (ir_debug >= level) \
                printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
-       }
+       } while (0)
 
 struct tm6000_ir_poll_result {
        u16 rc_data;
@@ -62,20 +65,15 @@ struct tm6000_IR {
        int                     polling;
        struct delayed_work     work;
        u8                      wait:1;
-       u8                      key:1;
-       u8                      pwled:1;
-       u8                      pwledcnt;
+       u8                      pwled:2;
+       u8                      submit_urb:1;
        u16                     key_addr;
        struct urb              *int_urb;
-       u8                      *urb_data;
-
-       int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
 
        /* IR device properties */
        u64                     rc_type;
 };
 
-
 void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
 {
        struct tm6000_IR *ir = dev->ir;
@@ -83,62 +81,84 @@ void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
        if (!dev->ir)
                return;
 
+       dprintk(2, "%s: %i\n",__func__, ir->wait);
+
        if (state)
                ir->wait = 1;
        else
                ir->wait = 0;
 }
 
-
 static int tm6000_ir_config(struct tm6000_IR *ir)
 {
        struct tm6000_core *dev = ir->dev;
-       u8 buf[10];
-       int rc;
+       u32 pulse = 0, leader = 0;
+
+       dprintk(2, "%s\n",__func__);
+
+       /*
+        * The IR decoder supports RC-5 or NEC, with a configurable timing.
+        * The timing configuration there is not that accurate, as it uses
+        * approximate values. The NEC spec mentions a 562.5 unit period,
+        * and RC-5 uses a 888.8 period.
+        * Currently, driver assumes a clock provided by a 12 MHz XTAL, but
+        * a modprobe parameter can adjust it.
+        * Adjustments are required for other timings.
+        * It seems that the 900ms timing for NEC is used to detect a RC-5
+        * IR, in order to discard such decoding
+        */
 
        switch (ir->rc_type) {
        case RC_TYPE_NEC:
-               /* Setup IR decoder for NEC standard 12MHz system clock */
-               /* IR_LEADER_CNT = 0.9ms             */
-               tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, 0xaa);
-               tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, 0x30);
-               /* IR_PULSE_CNT = 0.7ms              */
-               tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20);
-               tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0);
-               /* Remote WAKEUP = enable */
-               tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
-               /* IR_WKUP_SEL = Low byte in decoded IR data */
-               tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff);
-               /* IR_WKU_ADD code */
-               tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff);
-               tm6000_flash_led(dev, 0);
-               msleep(100);
-               tm6000_flash_led(dev, 1);
+               leader = 900;   /* ms */
+               pulse  = 700;   /* ms - the actual value would be 562 */
                break;
        default:
-               /* hack */
-               buf[0] = 0xff;
-               buf[1] = 0xff;
-               buf[2] = 0xf2;
-               buf[3] = 0x2b;
-               buf[4] = 0x20;
-               buf[5] = 0x35;
-               buf[6] = 0x60;
-               buf[7] = 0x04;
-               buf[8] = 0xc0;
-               buf[9] = 0x08;
-
-               rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
-                       USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
-               msleep(100);
-
-               if (rc < 0) {
-                       printk(KERN_INFO "IR configuration failed");
-                       return rc;
-               }
+       case RC_TYPE_RC5:
+               leader = 900;   /* ms - from the NEC decoding */
+               pulse  = 1780;  /* ms - The actual value would be 1776 */
                break;
        }
 
+       pulse = ir_clock_mhz * pulse;
+       leader = ir_clock_mhz * leader;
+       if (ir->rc_type == RC_TYPE_NEC)
+               leader = leader | 0x8000;
+
+       dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n",
+               __func__,
+               (ir->rc_type == RC_TYPE_NEC) ? "NEC" : "RC-5",
+               ir_clock_mhz, leader, pulse);
+
+       /* Remote WAKEUP = enable, normal mode, from IR decoder output */
+       tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+
+       /* Enable IR reception on non-busrt mode */
+       tm6000_set_reg(dev, TM6010_REQ07_RD8_IR, 0x2f);
+
+       /* IR_WKUP_SEL = Low byte in decoded IR data */
+       tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff);
+       /* IR_WKU_ADD code */
+       tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff);
+
+       tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, leader >> 8);
+       tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, leader);
+
+       tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, pulse >> 8);
+       tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, pulse);
+
+       if (!ir->polling)
+               tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+       else
+               tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
+       msleep(10);
+
+       /* Shows that IR is working via the LED */
+       tm6000_flash_led(dev, 0);
+       msleep(100);
+       tm6000_flash_led(dev, 1);
+       ir->pwled = 1;
+
        return 0;
 }
 
@@ -146,143 +166,124 @@ static void tm6000_ir_urb_received(struct urb *urb)
 {
        struct tm6000_core *dev = urb->context;
        struct tm6000_IR *ir = dev->ir;
+       struct tm6000_ir_poll_result poll_result;
+       char *buf;
        int rc;
 
-       if (urb->status != 0)
-               printk(KERN_INFO "not ready\n");
-       else if (urb->actual_length > 0) {
-               memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
+       dprintk(2, "%s\n",__func__);
+       if (urb->status < 0 || urb->actual_length <= 0) {
+               printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n",
+                      urb->status, urb->actual_length);
+               ir->submit_urb = 1;
+               schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+               return;
+       }
+       buf = urb->transfer_buffer;
 
-               dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
-                       ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+       if (ir_debug)
+               print_hex_dump(KERN_DEBUG, "tm6000: IR data: ",
+                              DUMP_PREFIX_OFFSET,16, 1,
+                              buf, urb->actual_length, false);
 
-               ir->key = 1;
-       }
+       poll_result.rc_data = buf[0];
+       if (urb->actual_length > 1)
+               poll_result.rc_data |= buf[1] << 8;
+
+       dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
+       rc_keydown(ir->rc, poll_result.rc_data, 0);
 
        rc = usb_submit_urb(urb, GFP_ATOMIC);
+       /*
+        * Flash the led. We can't do it here, as it is running on IRQ context.
+        * So, use the scheduler to do it, in a few ms.
+        */
+       ir->pwled = 2;
+       schedule_delayed_work(&ir->work, msecs_to_jiffies(10));
 }
 
-static int default_polling_getkey(struct tm6000_IR *ir,
-                               struct tm6000_ir_poll_result *poll_result)
+static void tm6000_ir_handle_key(struct work_struct *work)
 {
+       struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
        struct tm6000_core *dev = ir->dev;
+       struct tm6000_ir_poll_result poll_result;
        int rc;
        u8 buf[2];
 
-       if (ir->wait && !&dev->int_in)
-               return 0;
-
-       if (&dev->int_in) {
-               switch (ir->rc_type) {
-               case RC_TYPE_RC5:
-                       poll_result->rc_data = ir->urb_data[0];
-                       break;
-               case RC_TYPE_NEC:
-                       switch (dev->model) {
-                       case 10:
-                       case 11:
-                       case 14:
-                       case 15:
-                               if (ir->urb_data[1] ==
-                                       ((ir->key_addr >> 8) & 0xff)) {
-                                       poll_result->rc_data =
-                                       ir->urb_data[0]
-                                       | ir->urb_data[1] << 8;
-                               }
-                               break;
-                       default:
-                               poll_result->rc_data = ir->urb_data[0]
-                                       | ir->urb_data[1] << 8;
-                       }
-                       break;
-               default:
-                       poll_result->rc_data = ir->urb_data[0]
-                                       | ir->urb_data[1] << 8;
-                       break;
-               }
-       } else {
-               tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
-               msleep(10);
-               tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
-               msleep(10);
-
-               if (ir->rc_type == RC_TYPE_RC5) {
-                       rc = tm6000_read_write_usb(dev, USB_DIR_IN |
-                               USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-                               REQ_02_GET_IR_CODE, 0, 0, buf, 1);
-
-                       msleep(10);
-
-                       dprintk("read data=%02x\n", buf[0]);
-                       if (rc < 0)
-                               return rc;
+       if (ir->wait)
+               return;
 
-                       poll_result->rc_data = buf[0];
-               } else {
-                       rc = tm6000_read_write_usb(dev, USB_DIR_IN |
-                               USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-                               REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+       dprintk(3, "%s\n",__func__);
 
-                       msleep(10);
+       rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+               USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+               REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+       if (rc < 0)
+               return;
 
-                       dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
-                       if (rc < 0)
-                               return rc;
+       if (rc > 1)
+               poll_result.rc_data = buf[0] | buf[1] << 8;
+       else
+               poll_result.rc_data = buf[0];
 
-                       poll_result->rc_data = buf[0] | buf[1] << 8;
+       /* Check if something was read */
+       if ((poll_result.rc_data & 0xff) == 0xff) {
+               if (!ir->pwled) {
+                       tm6000_flash_led(dev, 1);
+                       ir->pwled = 1;
                }
-               if ((poll_result->rc_data & 0x00ff) != 0xff)
-                       ir->key = 1;
+               return;
        }
-       return 0;
+
+       dprintk(1, "%s, scancode: 0x%04x\n",__func__, poll_result.rc_data);
+       rc_keydown(ir->rc, poll_result.rc_data, 0);
+       tm6000_flash_led(dev, 0);
+       ir->pwled = 0;
+
+       /* Re-schedule polling */
+       schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
 }
 
-static void tm6000_ir_handle_key(struct tm6000_IR *ir)
+static void tm6000_ir_int_work(struct work_struct *work)
 {
+       struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
        struct tm6000_core *dev = ir->dev;
-       int result;
-       struct tm6000_ir_poll_result poll_result;
+       int rc;
 
-       /* read the registers containing the IR status */
-       result = ir->get_key(ir, &poll_result);
-       if (result < 0) {
-               printk(KERN_INFO "ir->get_key() failed %d\n", result);
-               return;
-       }
+       dprintk(3, "%s, submit_urb = %d, pwled = %d\n",__func__, ir->submit_urb,
+               ir->pwled);
 
-       if (ir->pwled) {
-               if (ir->pwledcnt >= PWLED_OFF) {
-                       ir->pwled = 0;
-                       ir->pwledcnt = 0;
-                       tm6000_flash_led(dev, 1);
-               } else
-                       ir->pwledcnt += 1;
+       if (ir->submit_urb) {
+               dprintk(3, "Resubmit urb\n");
+               tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
+
+               rc = usb_submit_urb(ir->int_urb, GFP_ATOMIC);
+               if (rc < 0) {
+                       printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n",
+                              rc);
+                       /* Retry in 100 ms */
+                       schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
+                       return;
+               }
+               ir->submit_urb = 0;
        }
 
-       if (ir->key) {
-               dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
-               rc_keydown(ir->rc, poll_result.rc_data, 0);
-               ir->key = 0;
-               ir->pwled = 1;
-               ir->pwledcnt = 0;
+       /* Led is enabled only if USB submit doesn't fail */
+       if (ir->pwled == 2) {
                tm6000_flash_led(dev, 0);
+               ir->pwled = 0;
+               schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_INT_LED_DELAY));
+       } else if (!ir->pwled) {
+               tm6000_flash_led(dev, 1);
+               ir->pwled = 1;
        }
-       return;
-}
-
-static void tm6000_ir_work(struct work_struct *work)
-{
-       struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
-
-       tm6000_ir_handle_key(ir);
-       schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
 }
 
 static int tm6000_ir_start(struct rc_dev *rc)
 {
        struct tm6000_IR *ir = rc->priv;
 
-       INIT_DELAYED_WORK(&ir->work, tm6000_ir_work);
+       dprintk(2, "%s\n",__func__);
+
        schedule_delayed_work(&ir->work, 0);
 
        return 0;
@@ -292,6 +293,8 @@ static void tm6000_ir_stop(struct rc_dev *rc)
 {
        struct tm6000_IR *ir = rc->priv;
 
+       dprintk(2, "%s\n",__func__);
+
        cancel_delayed_work_sync(&ir->work);
 }
 
@@ -302,10 +305,11 @@ static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
        if (!ir)
                return 0;
 
+       dprintk(2, "%s\n",__func__);
+
        if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
                ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
 
-       ir->get_key = default_polling_getkey;
        ir->rc_type = rc_type;
 
        tm6000_ir_config(ir);
@@ -313,17 +317,19 @@ static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
        return 0;
 }
 
-int tm6000_ir_int_start(struct tm6000_core *dev)
+static int __tm6000_ir_int_start(struct rc_dev *rc)
 {
-       struct tm6000_IR *ir = dev->ir;
+       struct tm6000_IR *ir = rc->priv;
+       struct tm6000_core *dev = ir->dev;
        int pipe, size;
        int err = -ENOMEM;
 
-
        if (!ir)
                return -ENODEV;
 
-       ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+       dprintk(2, "%s\n",__func__);
+
+       ir->int_urb = usb_alloc_urb(0, GFP_ATOMIC);
        if (!ir->int_urb)
                return -ENOMEM;
 
@@ -332,42 +338,53 @@ int tm6000_ir_int_start(struct tm6000_core *dev)
                & USB_ENDPOINT_NUMBER_MASK);
 
        size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
-       dprintk("IR max size: %d\n", size);
+       dprintk(1, "IR max size: %d\n", size);
 
-       ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+       ir->int_urb->transfer_buffer = kzalloc(size, GFP_ATOMIC);
        if (ir->int_urb->transfer_buffer == NULL) {
                usb_free_urb(ir->int_urb);
                return err;
        }
-       dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
+       dprintk(1, "int interval: %d\n", dev->int_in.endp->desc.bInterval);
+
        usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
                ir->int_urb->transfer_buffer, size,
                tm6000_ir_urb_received, dev,
                dev->int_in.endp->desc.bInterval);
-       err = usb_submit_urb(ir->int_urb, GFP_ATOMIC);
-       if (err) {
-               kfree(ir->int_urb->transfer_buffer);
-               usb_free_urb(ir->int_urb);
-               return err;
-       }
-       ir->urb_data = kzalloc(size, GFP_KERNEL);
+
+       ir->submit_urb = 1;
+       schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
 
        return 0;
 }
 
-void tm6000_ir_int_stop(struct tm6000_core *dev)
+static void __tm6000_ir_int_stop(struct rc_dev *rc)
 {
-       struct tm6000_IR *ir = dev->ir;
+       struct tm6000_IR *ir = rc->priv;
 
-       if (!ir)
+       if (!ir || !ir->int_urb)
                return;
 
+       dprintk(2, "%s\n",__func__);
+
        usb_kill_urb(ir->int_urb);
        kfree(ir->int_urb->transfer_buffer);
        usb_free_urb(ir->int_urb);
        ir->int_urb = NULL;
-       kfree(ir->urb_data);
-       ir->urb_data = NULL;
+}
+
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+       struct tm6000_IR *ir = dev->ir;
+
+       return __tm6000_ir_int_start(ir->rc);
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+       struct tm6000_IR *ir = dev->ir;
+
+       __tm6000_ir_int_stop(ir->rc);
 }
 
 int tm6000_ir_init(struct tm6000_core *dev)
@@ -385,7 +402,9 @@ int tm6000_ir_init(struct tm6000_core *dev)
        if (!dev->ir_codes)
                return 0;
 
-       ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+       dprintk(2, "%s\n",__func__);
+
+       ir = kzalloc(sizeof(*ir), GFP_ATOMIC);
        rc = rc_allocate_device();
        if (!ir || !rc)
                goto out;
@@ -395,19 +414,22 @@ int tm6000_ir_init(struct tm6000_core *dev)
        dev->ir = ir;
        ir->rc = rc;
 
-       /* input einrichten */
+       /* input setup */
        rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
        rc->priv = ir;
        rc->change_protocol = tm6000_ir_change_protocol;
-       rc->open = tm6000_ir_start;
-       rc->close = tm6000_ir_stop;
+       if (&dev->int_in) {
+               rc->open    = __tm6000_ir_int_start;
+               rc->close   = __tm6000_ir_int_stop;
+               INIT_DELAYED_WORK(&ir->work, tm6000_ir_int_work);
+       } else {
+               rc->open  = tm6000_ir_start;
+               rc->close = tm6000_ir_stop;
+               ir->polling = 50;
+               INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key);
+       }
        rc->driver_type = RC_DRIVER_SCANCODE;
 
-       ir->polling = 50;
-       ir->pwled = 0;
-       ir->pwledcnt = 0;
-
-
        snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
                                                dev->name);
 
@@ -426,15 +448,6 @@ int tm6000_ir_init(struct tm6000_core *dev)
        rc->driver_name = "tm6000";
        rc->dev.parent = &dev->udev->dev;
 
-       if (&dev->int_in) {
-               dprintk("IR over int\n");
-
-               err = tm6000_ir_int_start(dev);
-
-               if (err)
-                       goto out;
-       }
-
        /* ir register */
        err = rc_register_device(rc);
        if (err)
@@ -458,10 +471,19 @@ int tm6000_ir_fini(struct tm6000_core *dev)
        if (!ir)
                return 0;
 
+       dprintk(2, "%s\n",__func__);
+
        rc_unregister_device(ir->rc);
 
-       if (ir->int_urb)
-               tm6000_ir_int_stop(dev);
+       if (!ir->polling)
+               __tm6000_ir_int_stop(ir->rc);
+
+       tm6000_ir_stop(ir->rc);
+
+       /* Turn off the led */
+       tm6000_flash_led(dev, 0);
+       ir->pwled = 0;
+
 
        kfree(ir);
        dev->ir = NULL;