USB: serial: mct_u232.c: remove dbg() usage
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 14 Sep 2012 22:08:30 +0000 (15:08 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 14 Sep 2012 22:08:30 +0000 (15:08 -0700)
dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

CC: Johan Hovold <jhovold@gmail.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/serial/mct_u232.c

index a71fa0aa04066dd38758fe35c87cf007a3b55f4a..ab8f9ff75abdb4bd64773f99ff9feacf2f0e2d8a 100644 (file)
@@ -214,7 +214,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
                        value, rc);
        else
                tty_encode_baud_rate(tty, speed, speed);
-       dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
+       dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor);
 
        /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
           always sends two extra USB 'device request' messages after the
@@ -247,8 +247,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
        if (port && C_CRTSCTS(tty))
           cts_enable_byte = 1;
 
-       dbg("set_baud_rate: send second control message, data = %02X",
-                                                       cts_enable_byte);
+       dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n",
+               cts_enable_byte);
        buf[0] = cts_enable_byte;
        rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
                        MCT_U232_SET_CTS_REQUEST,
@@ -263,7 +263,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
        return rc;
 } /* mct_u232_set_baud_rate */
 
-static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
+static int mct_u232_set_line_ctrl(struct usb_serial_port *port,
+                                 unsigned char lcr)
 {
        int rc;
        unsigned char *buf;
@@ -273,20 +274,19 @@ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
                return -ENOMEM;
 
        buf[0] = lcr;
-       rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+       rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
                        MCT_U232_SET_LINE_CTRL_REQUEST,
                        MCT_U232_SET_REQUEST_TYPE,
                        0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
                        WDR_TIMEOUT);
        if (rc < 0)
-               dev_err(&serial->dev->dev,
-                       "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
-       dbg("set_line_ctrl: 0x%x", lcr);
+               dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
+       dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr);
        kfree(buf);
        return rc;
 } /* mct_u232_set_line_ctrl */
 
-static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
+static int mct_u232_set_modem_ctrl(struct usb_serial_port *port,
                                   unsigned int control_state)
 {
        int rc;
@@ -304,25 +304,24 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
                mcr |= MCT_U232_MCR_RTS;
 
        buf[0] = mcr;
-       rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+       rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
                        MCT_U232_SET_MODEM_CTRL_REQUEST,
                        MCT_U232_SET_REQUEST_TYPE,
                        0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
                        WDR_TIMEOUT);
        kfree(buf);
 
-       dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
+       dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr);
 
        if (rc < 0) {
-               dev_err(&serial->dev->dev,
-                       "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+               dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
                return rc;
        }
        return 0;
 } /* mct_u232_set_modem_ctrl */
 
-static int mct_u232_get_modem_stat(struct usb_serial *serial,
-                                               unsigned char *msr)
+static int mct_u232_get_modem_stat(struct usb_serial_port *port,
+                                  unsigned char *msr)
 {
        int rc;
        unsigned char *buf;
@@ -332,19 +331,18 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial,
                *msr = 0;
                return -ENOMEM;
        }
-       rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+       rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
                        MCT_U232_GET_MODEM_STAT_REQUEST,
                        MCT_U232_GET_REQUEST_TYPE,
                        0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
                        WDR_TIMEOUT);
        if (rc < 0) {
-               dev_err(&serial->dev->dev,
-                       "Get MODEM STATus failed (error = %d)\n", rc);
+               dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc);
                *msr = 0;
        } else {
                *msr = buf[0];
        }
-       dbg("get_modem_stat: 0x%x", *msr);
+       dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr);
        kfree(buf);
        return rc;
 } /* mct_u232_get_modem_stat */
@@ -363,8 +361,8 @@ static void mct_u232_msr_to_icount(struct async_icount *icount,
                icount->dcd++;
 } /* mct_u232_msr_to_icount */
 
-static void mct_u232_msr_to_state(unsigned int *control_state,
-                                               unsigned char msr)
+static void mct_u232_msr_to_state(struct usb_serial_port *port,
+                                 unsigned int *control_state, unsigned char msr)
 {
        /* Translate Control Line states */
        if (msr & MCT_U232_MSR_DSR)
@@ -383,7 +381,7 @@ static void mct_u232_msr_to_state(unsigned int *control_state,
                *control_state |=  TIOCM_CD;
        else
                *control_state &= ~TIOCM_CD;
-       dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state);
+       dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state);
 } /* mct_u232_msr_to_state */
 
 /*
@@ -465,14 +463,14 @@ static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
        control_state = priv->control_state;
        last_lcr = priv->last_lcr;
        spin_unlock_irqrestore(&priv->lock, flags);
-       mct_u232_set_modem_ctrl(serial, control_state);
-       mct_u232_set_line_ctrl(serial, last_lcr);
+       mct_u232_set_modem_ctrl(port, control_state);
+       mct_u232_set_line_ctrl(port, last_lcr);
 
        /* Read modem status and update control state */
-       mct_u232_get_modem_stat(serial, &last_msr);
+       mct_u232_get_modem_stat(port, &last_msr);
        spin_lock_irqsave(&priv->lock, flags);
        priv->last_msr = last_msr;
-       mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
+       mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
        spin_unlock_irqrestore(&priv->lock, flags);
 
        retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
@@ -512,7 +510,7 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
                        priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
                control_state = priv->control_state;
                spin_unlock_irq(&priv->lock);
-               mct_u232_set_modem_ctrl(port->serial, control_state);
+               mct_u232_set_modem_ctrl(port, control_state);
        }
        mutex_unlock(&port->serial->disc_mutex);
 }
@@ -532,7 +530,6 @@ static void mct_u232_read_int_callback(struct urb *urb)
 {
        struct usb_serial_port *port = urb->context;
        struct mct_u232_private *priv = usb_get_serial_port_data(port);
-       struct usb_serial *serial = port->serial;
        struct tty_struct *tty;
        unsigned char *data = urb->transfer_buffer;
        int retval;
@@ -547,20 +544,15 @@ static void mct_u232_read_int_callback(struct urb *urb)
        case -ENOENT:
        case -ESHUTDOWN:
                /* this urb is terminated, clean up */
-               dbg("%s - urb shutting down with status: %d",
-                   __func__, status);
+               dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+                       __func__, status);
                return;
        default:
-               dbg("%s - nonzero urb status received: %d",
-                   __func__, status);
+               dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+                       __func__, status);
                goto exit;
        }
 
-       if (!serial) {
-               dbg("%s - bad serial pointer, exiting", __func__);
-               return;
-       }
-
        usb_serial_debug_data(debug, &port->dev, __func__,
                                        urb->actual_length, data);
 
@@ -588,7 +580,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
        priv->last_msr = data[MCT_U232_MSR_INDEX];
 
        /* Record Control Line states */
-       mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
+       mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr);
 
        mct_u232_msr_to_icount(&priv->icount, priv->last_msr);
 
@@ -656,18 +648,18 @@ static void mct_u232_set_termios(struct tty_struct *tty,
 
        /* reassert DTR and RTS on transition from B0 */
        if ((old_cflag & CBAUD) == B0) {
-               dbg("%s: baud was B0", __func__);
+               dev_dbg(&port->dev, "%s: baud was B0\n", __func__);
                control_state |= TIOCM_DTR | TIOCM_RTS;
-               mct_u232_set_modem_ctrl(serial, control_state);
+               mct_u232_set_modem_ctrl(port, control_state);
        }
 
        mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));
 
        if ((cflag & CBAUD) == B0) {
-               dbg("%s: baud is B0", __func__);
+               dev_dbg(&port->dev, "%s: baud is B0\n", __func__);
                /* Drop RTS and DTR */
                control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-               mct_u232_set_modem_ctrl(serial, control_state);
+               mct_u232_set_modem_ctrl(port, control_state);
        }
 
        /*
@@ -704,7 +696,7 @@ static void mct_u232_set_termios(struct tty_struct *tty,
        last_lcr |= (cflag & CSTOPB) ?
                MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
 
-       mct_u232_set_line_ctrl(serial, last_lcr);
+       mct_u232_set_line_ctrl(port, last_lcr);
 
        /* save off the modified port settings */
        spin_lock_irqsave(&priv->lock, flags);
@@ -716,7 +708,6 @@ static void mct_u232_set_termios(struct tty_struct *tty,
 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 {
        struct usb_serial_port *port = tty->driver_data;
-       struct usb_serial *serial = port->serial;
        struct mct_u232_private *priv = usb_get_serial_port_data(port);
        unsigned char lcr;
        unsigned long flags;
@@ -728,7 +719,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
                lcr |= MCT_U232_SET_BREAK;
        spin_unlock_irqrestore(&priv->lock, flags);
 
-       mct_u232_set_line_ctrl(serial, lcr);
+       mct_u232_set_line_ctrl(port, lcr);
 } /* mct_u232_break_ctl */
 
 
@@ -750,7 +741,6 @@ static int mct_u232_tiocmset(struct tty_struct *tty,
                              unsigned int set, unsigned int clear)
 {
        struct usb_serial_port *port = tty->driver_data;
-       struct usb_serial *serial = port->serial;
        struct mct_u232_private *priv = usb_get_serial_port_data(port);
        unsigned int control_state;
        unsigned long flags;
@@ -769,7 +759,7 @@ static int mct_u232_tiocmset(struct tty_struct *tty,
 
        priv->control_state = control_state;
        spin_unlock_irqrestore(&priv->lock, flags);
-       return mct_u232_set_modem_ctrl(serial, control_state);
+       return mct_u232_set_modem_ctrl(port, control_state);
 }
 
 static void mct_u232_throttle(struct tty_struct *tty)
@@ -784,7 +774,7 @@ static void mct_u232_throttle(struct tty_struct *tty)
                priv->control_state &= ~TIOCM_RTS;
                control_state = priv->control_state;
                spin_unlock_irq(&priv->lock);
-               (void) mct_u232_set_modem_ctrl(port->serial, control_state);
+               mct_u232_set_modem_ctrl(port, control_state);
        } else {
                spin_unlock_irq(&priv->lock);
        }
@@ -802,7 +792,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
                priv->control_state |= TIOCM_RTS;
                control_state = priv->control_state;
                spin_unlock_irq(&priv->lock);
-               (void) mct_u232_set_modem_ctrl(port->serial, control_state);
+               mct_u232_set_modem_ctrl(port, control_state);
        } else {
                spin_unlock_irq(&priv->lock);
        }
@@ -817,13 +807,13 @@ static int  mct_u232_ioctl(struct tty_struct *tty,
        struct async_icount cnow, cprev;
        unsigned long flags;
 
-       dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+       dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
 
        switch (cmd) {
 
        case TIOCMIWAIT:
 
-               dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+               dev_dbg(&port->dev, "%s TIOCMIWAIT", __func__);
 
                spin_lock_irqsave(&mct_u232_port->lock, flags);
                cprev = mct_u232_port->icount;
@@ -879,8 +869,8 @@ static int  mct_u232_get_icount(struct tty_struct *tty,
 
        spin_unlock_irqrestore(&mct_u232_port->lock, flags);
 
-       dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
-               __func__,  port->number, icount->rx, icount->tx);
+       dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n",
+               __func__,  icount->rx, icount->tx);
        return 0;
 }