+++ /dev/null
-/*
- * MPC8349E MDS Device Tree Source
- *
- * Copyright 2005, 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/ {
- model = "MPC8349EMDS";
- compatible = "MPC834xMDS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #cpus = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8349@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // from bootloader
- bus-frequency = <0>; // from bootloader
- clock-frequency = <0>; // from bootloader
- 32-bit;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <00000000 10000000>; // 256MB at 0
- };
-
- bcsr@e2400000 {
- device_type = "board-control";
- reg = <e2400000 8000>;
- };
-
- soc8349@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- #interrupt-cells = <2>;
- device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00000200>;
- bus-frequency = <0>;
-
- wdt@200 {
- device_type = "watchdog";
- compatible = "mpc83xx_wdt";
- reg = <200 100>;
- };
-
- i2c@3000 {
- device_type = "i2c";
- compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <e 8>;
- interrupt-parent = <700>;
- dfsrr;
- };
-
- i2c@3100 {
- device_type = "i2c";
- compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <f 8>;
- interrupt-parent = <700>;
- dfsrr;
- };
-
- spi@7000 {
- device_type = "spi";
- compatible = "mpc83xx_spi";
- reg = <7000 1000>;
- interrupts = <10 8>;
- interrupt-parent = <700>;
- mode = <0>;
- };
-
- /* phy type (ULPI or SERIAL) are only types supportted for MPH */
- /* port = 0 or 1 */
- usb@22000 {
- device_type = "usb";
- compatible = "fsl-usb2-mph";
- reg = <22000 1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <27 2>;
- phy_type = "ulpi";
- port1;
- };
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
- usb@23000 {
- device_type = "usb";
- compatible = "fsl-usb2-dr";
- reg = <23000 1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
- dr_mode = "otg";
- phy_type = "ulpi";
- };
-
- mdio@24520 {
- device_type = "mdio";
- compatible = "gianfar";
- reg = <24520 20>;
- #address-cells = <1>;
- #size-cells = <0>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- };
-
- ethernet@24000 {
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <24000 1000>;
- address = [ 00 00 00 00 00 00 ];
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <20 8 21 8 22 8>;
- interrupt-parent = <700>;
- phy-handle = <2452000>;
- };
-
- ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <25000 1000>;
- address = [ 00 00 00 00 00 00 ];
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 8 24 8 25 8>;
- interrupt-parent = <700>;
- phy-handle = <2452001>;
- };
-
- serial@4500 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <4500 100>;
- clock-frequency = <0>;
- interrupts = <9 8>;
- interrupt-parent = <700>;
- };
-
- serial@4600 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <4600 100>;
- clock-frequency = <0>;
- interrupts = <a 8>;
- interrupt-parent = <700>;
- };
-
- pci@8500 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x11 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
-
- /* IDSEL 0x12 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
-
- /* IDSEL 0x13 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
-
- /* IDSEL 0x15 */
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
-
- /* IDSEL 0x16 */
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
-
- /* IDSEL 0x17 */
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
-
- /* IDSEL 0x18 */
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 42000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8500 100>;
- compatible = "83xx";
- device_type = "pci";
- };
-
- pci@8600 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x11 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
-
- /* IDSEL 0x12 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
-
- /* IDSEL 0x13 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
-
- /* IDSEL 0x15 */
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
-
- /* IDSEL 0x16 */
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
-
- /* IDSEL 0x17 */
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
-
- /* IDSEL 0x18 */
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 b0000000 b0000000 0 10000000
- 42000000 0 90000000 90000000 0 10000000
- 01000000 0 00000000 e2100000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8600 100>;
- compatible = "83xx";
- device_type = "pci";
- };
-
- /* May need to remove if on a part without crypto engine */
- crypto@30000 {
- device_type = "crypto";
- model = "SEC2";
- compatible = "talitos";
- reg = <30000 10000>;
- interrupts = <b 8>;
- interrupt-parent = <700>;
- num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <0000007e>;
- /* desc mask is for rev2.0,
- * we need runtime fixup for >2.0 */
- descriptor-types-mask = <01010ebf>;
- };
-
- /* IPIC
- * interrupts cell = <intr #, sense>
- * sense values match linux IORESOURCE_IRQ_* defines:
- * sense == 8: Level, low assertion
- * sense == 2: Edge, high-to-low change
- */
- pic@700 {
- linux,phandle = <700>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <700 100>;
- built-in;
- device_type = "ipic";
- };
- };
-};
--- /dev/null
+/*
+ * MPC8349E MDS Device Tree Source
+ *
+ * Copyright 2005, 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/ {
+ model = "MPC8349EMDS";
+ compatible = "MPC834xMDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8349@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 10000000>; // 256MB at 0
+ };
+
+ bcsr@e2400000 {
+ device_type = "board-control";
+ reg = <e2400000 8000>;
+ };
+
+ soc8349@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <200 100>;
+ };
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <e 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3100 100>;
+ interrupts = <f 8>;
+ interrupt-parent = <700>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ device_type = "spi";
+ compatible = "mpc83xx_spi";
+ reg = <7000 1000>;
+ interrupts = <10 8>;
+ interrupt-parent = <700>;
+ mode = <0>;
+ };
+
+ /* phy type (ULPI or SERIAL) are only types supportted for MPH */
+ /* port = 0 or 1 */
+ usb@22000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-mph";
+ reg = <22000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <27 2>;
+ phy_type = "ulpi";
+ port1;
+ };
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <26 2>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <700>;
+ interrupts = <11 2>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <700>;
+ interrupts = <12 2>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ address = [ 00 00 00 00 00 00 ];
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <20 8 21 8 22 8>;
+ interrupt-parent = <700>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ address = [ 00 00 00 00 00 00 ];
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <23 8 24 8 25 8>;
+ interrupt-parent = <700>;
+ phy-handle = <2452001>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>;
+ clock-frequency = <0>;
+ interrupts = <9 8>;
+ interrupt-parent = <700>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>;
+ clock-frequency = <0>;
+ interrupts = <a 8>;
+ interrupt-parent = <700>;
+ };
+
+ pci@8500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 */
+ 8800 0 0 1 700 14 8
+ 8800 0 0 2 700 15 8
+ 8800 0 0 3 700 16 8
+ 8800 0 0 4 700 17 8
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 700 16 8
+ 9000 0 0 2 700 17 8
+ 9000 0 0 3 700 14 8
+ 9000 0 0 4 700 15 8
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 700 17 8
+ 9800 0 0 2 700 14 8
+ 9800 0 0 3 700 15 8
+ 9800 0 0 4 700 16 8
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 700 14 8
+ a800 0 0 2 700 15 8
+ a800 0 0 3 700 16 8
+ a800 0 0 4 700 17 8
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 700 17 8
+ b000 0 0 2 700 14 8
+ b000 0 0 3 700 15 8
+ b000 0 0 4 700 16 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 700 16 8
+ b800 0 0 2 700 17 8
+ b800 0 0 3 700 14 8
+ b800 0 0 4 700 15 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 700 15 8
+ c000 0 0 2 700 16 8
+ c000 0 0 3 700 17 8
+ c000 0 0 4 700 14 8>;
+ interrupt-parent = <700>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8500 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ pci@8600 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 */
+ 8800 0 0 1 700 14 8
+ 8800 0 0 2 700 15 8
+ 8800 0 0 3 700 16 8
+ 8800 0 0 4 700 17 8
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 700 16 8
+ 9000 0 0 2 700 17 8
+ 9000 0 0 3 700 14 8
+ 9000 0 0 4 700 15 8
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 700 17 8
+ 9800 0 0 2 700 14 8
+ 9800 0 0 3 700 15 8
+ 9800 0 0 4 700 16 8
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 700 14 8
+ a800 0 0 2 700 15 8
+ a800 0 0 3 700 16 8
+ a800 0 0 4 700 17 8
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 700 17 8
+ b000 0 0 2 700 14 8
+ b000 0 0 3 700 15 8
+ b000 0 0 4 700 16 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 700 16 8
+ b800 0 0 2 700 17 8
+ b800 0 0 3 700 14 8
+ b800 0 0 4 700 15 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 700 15 8
+ c000 0 0 2 700 16 8
+ c000 0 0 3 700 17 8
+ c000 0 0 4 700 14 8>;
+ interrupt-parent = <700>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 b0000000 b0000000 0 10000000
+ 42000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 e2100000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8600 100>;
+ compatible = "83xx";
+ device_type = "pci";
+ };
+
+ /* May need to remove if on a part without crypto engine */
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <30000 10000>;
+ interrupts = <b 8>;
+ interrupt-parent = <700>;
+ num-channels = <4>;
+ channel-fifo-len = <18>;
+ exec-units-mask = <0000007e>;
+ /* desc mask is for rev2.0,
+ * we need runtime fixup for >2.0 */
+ descriptor-types-mask = <01010ebf>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ pic@700 {
+ linux,phandle = <700>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <700 100>;
+ built-in;
+ device_type = "ipic";
+ };
+ };
+};
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Fri Jan 26 00:19:27 2007
+# Linux kernel version: 2.6.20
+# Thu Feb 8 01:00:48 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
#
# Platform support
#
+# CONFIG_MPC8313_RDB is not set
# CONFIG_MPC832x_MDS is not set
-CONFIG_MPC834x_SYS=y
+CONFIG_MPC834x_MDS=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC8360E_PB is not set
CONFIG_MPC834x=y
choice
prompt "Machine Type"
- default MPC834x_SYS
+ default MPC834x_MDS
config MPC8313_RDB
bool "Freescale MPC8313 RDB"
help
This option enables support for the MPC832x MDS evaluation board.
-config MPC834x_SYS
- bool "Freescale MPC834x SYS"
+config MPC834x_MDS
+ bool "Freescale MPC834x MDS"
select DEFAULT_UIMAGE
help
- This option enables support for the MPC 834x SYS evaluation board.
+ This option enables support for the MPC 834x MDS evaluation board.
- Be aware that PCI buses can only function when SYS board is plugged
+ Be aware that PCI buses can only function when MDS board is plugged
into the PIB (Platform IO Board) board from Freescale which provide
3 PCI slots. The PIBs PCI initialization is the bootloader's
responsibility.
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC834x_SYS || MPC834x_ITX
+ default y if MPC834x_MDS || MPC834x_ITX
config PPC_MPC836x
bool
obj-y := misc.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o
-obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o
+obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
#include "mpc83xx.h"
-#include <platforms/83xx/mpc834x_sys.h>
-
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
--- /dev/null
+/*
+ * arch/powerpc/platforms/83xx/mpc834x_mds.c
+ *
+ * MPC834x MDS board specific routines
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+#define BCSR5_INT_USB 0x02
+/* Note: This is only for PB, not for PB+PIB
+ * On PB only port0 is connected using ULPI */
+static int mpc834x_usb_cfg(void)
+{
+ unsigned long sccr, sicrl;
+ void __iomem *immap;
+ void __iomem *bcsr_regs = NULL;
+ u8 bcsr5;
+ struct device_node *np = NULL;
+ int port0_is_dr = 0;
+
+ if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL)
+ port0_is_dr = 1;
+ if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){
+ if (port0_is_dr) {
+ printk(KERN_WARNING
+ "There is only one USB port on PB board! \n");
+ return -1;
+ } else if (!port0_is_dr)
+ /* No usb port enabled */
+ return -1;
+ }
+
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap)
+ return -1;
+
+ /* Configure clock */
+ sccr = in_be32(immap + MPC83XX_SCCR_OFFS);
+ if (port0_is_dr)
+ sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
+ else
+ sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
+ out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
+
+ /* Configure Pin */
+ sicrl = in_be32(immap + MPC83XX_SICRL_OFFS);
+ /* set port0 only */
+ if (port0_is_dr)
+ sicrl |= MPC83XX_SICRL_USB0;
+ else
+ sicrl &= ~(MPC83XX_SICRL_USB0);
+ out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
+
+ iounmap(immap);
+
+ /* Map BCSR area */
+ np = of_find_node_by_name(NULL, "bcsr");
+ if (np != 0) {
+ struct resource res;
+
+ of_address_to_resource(np, 0, &res);
+ bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+ of_node_put(np);
+ }
+ if (!bcsr_regs)
+ return -1;
+
+ /*
+ * if MDS board is plug into PIB board,
+ * force to use the PHY on MDS board
+ */
+ bcsr5 = in_8(bcsr_regs + 5);
+ if (!(bcsr5 & BCSR5_INT_USB))
+ out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
+ iounmap(bcsr_regs);
+ return 0;
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc834x_mds_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc834x_mds_setup_arch()", 0);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != 0) {
+ const unsigned int *fp =
+ get_property(np, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 50000000 / HZ;
+ of_node_put(np);
+ }
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+ mpc834x_usb_cfg();
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+static void __init mpc834x_mds_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
+extern ulong ds1374_get_rtc_time(void);
+extern int ds1374_set_rtc_time(ulong);
+
+static int __init mpc834x_rtc_hookup(void)
+{
+ struct timespec tv;
+
+ ppc_md.get_rtc_time = ds1374_get_rtc_time;
+ ppc_md.set_rtc_time = ds1374_set_rtc_time;
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = (ppc_md.get_rtc_time) ();
+ do_settimeofday(&tv);
+
+ return 0;
+}
+
+late_initcall(mpc834x_rtc_hookup);
+#endif
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_mds_probe(void)
+{
+ /* We always match for now, eventually we should look at the flat
+ dev tree to ensure this is the board we are suppose to run on
+ */
+ return 1;
+}
+
+define_machine(mpc834x_mds) {
+ .name = "MPC834x MDS",
+ .probe = mpc834x_mds_probe,
+ .setup_arch = mpc834x_mds_setup_arch,
+ .init_IRQ = mpc834x_mds_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+++ /dev/null
-/*
- * arch/powerpc/platforms/83xx/mpc834x_sys.c
- *
- * MPC834x SYS board specific routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ipic.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <sysdev/fsl_soc.h>
-
-#include "mpc83xx.h"
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-#endif
-
-#define BCSR5_INT_USB 0x02
-/* Note: This is only for PB, not for PB+PIB
- * On PB only port0 is connected using ULPI */
-static int mpc834x_usb_cfg(void)
-{
- unsigned long sccr, sicrl;
- void __iomem *immap;
- void __iomem *bcsr_regs = NULL;
- u8 bcsr5;
- struct device_node *np = NULL;
- int port0_is_dr = 0;
-
- if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL)
- port0_is_dr = 1;
- if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){
- if (port0_is_dr) {
- printk(KERN_WARNING
- "There is only one USB port on PB board! \n");
- return -1;
- } else if (!port0_is_dr)
- /* No usb port enabled */
- return -1;
- }
-
- immap = ioremap(get_immrbase(), 0x1000);
- if (!immap)
- return -1;
-
- /* Configure clock */
- sccr = in_be32(immap + MPC83XX_SCCR_OFFS);
- if (port0_is_dr)
- sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
- else
- sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
- out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
-
- /* Configure Pin */
- sicrl = in_be32(immap + MPC83XX_SICRL_OFFS);
- /* set port0 only */
- if (port0_is_dr)
- sicrl |= MPC83XX_SICRL_USB0;
- else
- sicrl &= ~(MPC83XX_SICRL_USB0);
- out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
-
- iounmap(immap);
-
- /* Map BCSR area */
- np = of_find_node_by_name(NULL, "bcsr");
- if (np != 0) {
- struct resource res;
-
- of_address_to_resource(np, 0, &res);
- bcsr_regs = ioremap(res.start, res.end - res.start + 1);
- of_node_put(np);
- }
- if (!bcsr_regs)
- return -1;
-
- /*
- * if SYS board is plug into PIB board,
- * force to use the PHY on SYS board
- */
- bcsr5 = in_8(bcsr_regs + 5);
- if (!(bcsr5 & BCSR5_INT_USB))
- out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
- iounmap(bcsr_regs);
- return 0;
-}
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init mpc834x_sys_setup_arch(void)
-{
- struct device_node *np;
-
- if (ppc_md.progress)
- ppc_md.progress("mpc834x_sys_setup_arch()", 0);
-
- np = of_find_node_by_type(NULL, "cpu");
- if (np != 0) {
- const unsigned int *fp =
- get_property(np, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(np);
- }
-
-#ifdef CONFIG_PCI
- for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
- add_bridge(np);
-
- ppc_md.pci_exclude_device = mpc83xx_exclude_device;
-#endif
-
- mpc834x_usb_cfg();
-
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-}
-
-static void __init mpc834x_sys_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
-#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)
-extern ulong ds1374_get_rtc_time(void);
-extern int ds1374_set_rtc_time(ulong);
-
-static int __init mpc834x_rtc_hookup(void)
-{
- struct timespec tv;
-
- ppc_md.get_rtc_time = ds1374_get_rtc_time;
- ppc_md.set_rtc_time = ds1374_set_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time) ();
- do_settimeofday(&tv);
-
- return 0;
-}
-
-late_initcall(mpc834x_rtc_hookup);
-#endif
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init mpc834x_sys_probe(void)
-{
- /* We always match for now, eventually we should look at the flat
- dev tree to ensure this is the board we are suppose to run on
- */
- return 1;
-}
-
-define_machine(mpc834x_sys) {
- .name = "MPC834x SYS",
- .probe = mpc834x_sys_probe,
- .setup_arch = mpc834x_sys_setup_arch,
- .init_IRQ = mpc834x_sys_init_IRQ,
- .get_irq = ipic_get_irq,
- .restart = mpc83xx_restart,
- .time_init = mpc83xx_time_init,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-};
+++ /dev/null
-/*
- * arch/powerpc/platforms/83xx/mpc834x_sys.h
- *
- * MPC834X SYS common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC83XX_SYS_H__
-#define __MACH_MPC83XX_SYS_H__
-
-#define PIRQA MPC83xx_IRQ_EXT4
-#define PIRQB MPC83xx_IRQ_EXT5
-#define PIRQC MPC83xx_IRQ_EXT6
-#define PIRQD MPC83xx_IRQ_EXT7
-
-#endif /* __MACH_MPC83XX_SYS_H__ */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff