#include "cxgb4_debugfs.h"
#include "l2t.h"
+/* Firmware Device Log dump.
+ */
+static const char * const devlog_level_strings[] = {
+ [FW_DEVLOG_LEVEL_EMERG] = "EMERG",
+ [FW_DEVLOG_LEVEL_CRIT] = "CRIT",
+ [FW_DEVLOG_LEVEL_ERR] = "ERR",
+ [FW_DEVLOG_LEVEL_NOTICE] = "NOTICE",
+ [FW_DEVLOG_LEVEL_INFO] = "INFO",
+ [FW_DEVLOG_LEVEL_DEBUG] = "DEBUG"
+};
+
+static const char * const devlog_facility_strings[] = {
+ [FW_DEVLOG_FACILITY_CORE] = "CORE",
+ [FW_DEVLOG_FACILITY_SCHED] = "SCHED",
+ [FW_DEVLOG_FACILITY_TIMER] = "TIMER",
+ [FW_DEVLOG_FACILITY_RES] = "RES",
+ [FW_DEVLOG_FACILITY_HW] = "HW",
+ [FW_DEVLOG_FACILITY_FLR] = "FLR",
+ [FW_DEVLOG_FACILITY_DMAQ] = "DMAQ",
+ [FW_DEVLOG_FACILITY_PHY] = "PHY",
+ [FW_DEVLOG_FACILITY_MAC] = "MAC",
+ [FW_DEVLOG_FACILITY_PORT] = "PORT",
+ [FW_DEVLOG_FACILITY_VI] = "VI",
+ [FW_DEVLOG_FACILITY_FILTER] = "FILTER",
+ [FW_DEVLOG_FACILITY_ACL] = "ACL",
+ [FW_DEVLOG_FACILITY_TM] = "TM",
+ [FW_DEVLOG_FACILITY_QFC] = "QFC",
+ [FW_DEVLOG_FACILITY_DCB] = "DCB",
+ [FW_DEVLOG_FACILITY_ETH] = "ETH",
+ [FW_DEVLOG_FACILITY_OFLD] = "OFLD",
+ [FW_DEVLOG_FACILITY_RI] = "RI",
+ [FW_DEVLOG_FACILITY_ISCSI] = "ISCSI",
+ [FW_DEVLOG_FACILITY_FCOE] = "FCOE",
+ [FW_DEVLOG_FACILITY_FOISCSI] = "FOISCSI",
+ [FW_DEVLOG_FACILITY_FOFCOE] = "FOFCOE"
+};
+
+/* Information gathered by Device Log Open routine for the display routine.
+ */
+struct devlog_info {
+ unsigned int nentries; /* number of entries in log[] */
+ unsigned int first; /* first [temporal] entry in log[] */
+ struct fw_devlog_e log[0]; /* Firmware Device Log */
+};
+
+/* Dump a Firmaware Device Log entry.
+ */
+static int devlog_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_printf(seq, "%10s %15s %8s %8s %s\n",
+ "Seq#", "Tstamp", "Level", "Facility", "Message");
+ else {
+ struct devlog_info *dinfo = seq->private;
+ int fidx = (uintptr_t)v - 2;
+ unsigned long index;
+ struct fw_devlog_e *e;
+
+ /* Get a pointer to the log entry to display. Skip unused log
+ * entries.
+ */
+ index = dinfo->first + fidx;
+ if (index >= dinfo->nentries)
+ index -= dinfo->nentries;
+ e = &dinfo->log[index];
+ if (e->timestamp == 0)
+ return 0;
+
+ /* Print the message. This depends on the firmware using
+ * exactly the same formating strings as the kernel so we may
+ * eventually have to put a format interpreter in here ...
+ */
+ seq_printf(seq, "%10d %15llu %8s %8s ",
+ e->seqno, e->timestamp,
+ (e->level < ARRAY_SIZE(devlog_level_strings)
+ ? devlog_level_strings[e->level]
+ : "UNKNOWN"),
+ (e->facility < ARRAY_SIZE(devlog_facility_strings)
+ ? devlog_facility_strings[e->facility]
+ : "UNKNOWN"));
+ seq_printf(seq, e->fmt, e->params[0], e->params[1],
+ e->params[2], e->params[3], e->params[4],
+ e->params[5], e->params[6], e->params[7]);
+ }
+ return 0;
+}
+
+/* Sequential File Operations for Device Log.
+ */
+static inline void *devlog_get_idx(struct devlog_info *dinfo, loff_t pos)
+{
+ if (pos > dinfo->nentries)
+ return NULL;
+
+ return (void *)(uintptr_t)(pos + 1);
+}
+
+static void *devlog_start(struct seq_file *seq, loff_t *pos)
+{
+ struct devlog_info *dinfo = seq->private;
+
+ return (*pos
+ ? devlog_get_idx(dinfo, *pos)
+ : SEQ_START_TOKEN);
+}
+
+static void *devlog_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct devlog_info *dinfo = seq->private;
+
+ (*pos)++;
+ return devlog_get_idx(dinfo, *pos);
+}
+
+static void devlog_stop(struct seq_file *seq, void *v)
+{
+}
+
+static const struct seq_operations devlog_seq_ops = {
+ .start = devlog_start,
+ .next = devlog_next,
+ .stop = devlog_stop,
+ .show = devlog_show
+};
+
+/* Set up for reading the firmware's device log. We read the entire log here
+ * and then display it incrementally in devlog_show().
+ */
+static int devlog_open(struct inode *inode, struct file *file)
+{
+ struct adapter *adap = inode->i_private;
+ struct devlog_params *dparams = &adap->params.devlog;
+ struct devlog_info *dinfo;
+ unsigned int index;
+ u32 fseqno;
+ int ret;
+
+ /* If we don't know where the log is we can't do anything.
+ */
+ if (dparams->start == 0)
+ return -ENXIO;
+
+ /* Allocate the space to read in the firmware's device log and set up
+ * for the iterated call to our display function.
+ */
+ dinfo = __seq_open_private(file, &devlog_seq_ops,
+ sizeof(*dinfo) + dparams->size);
+ if (!dinfo)
+ return -ENOMEM;
+
+ /* Record the basic log buffer information and read in the raw log.
+ */
+ dinfo->nentries = (dparams->size / sizeof(struct fw_devlog_e));
+ dinfo->first = 0;
+ spin_lock(&adap->win0_lock);
+ ret = t4_memory_rw(adap, adap->params.drv_memwin, dparams->memtype,
+ dparams->start, dparams->size, (__be32 *)dinfo->log,
+ T4_MEMORY_READ);
+ spin_unlock(&adap->win0_lock);
+ if (ret) {
+ seq_release_private(inode, file);
+ return ret;
+ }
+
+ /* Translate log multi-byte integral elements into host native format
+ * and determine where the first entry in the log is.
+ */
+ for (fseqno = ~((u32)0), index = 0; index < dinfo->nentries; index++) {
+ struct fw_devlog_e *e = &dinfo->log[index];
+ int i;
+ __u32 seqno;
+
+ if (e->timestamp == 0)
+ continue;
+
+ e->timestamp = (__force __be64)be64_to_cpu(e->timestamp);
+ seqno = be32_to_cpu(e->seqno);
+ for (i = 0; i < 8; i++)
+ e->params[i] =
+ (__force __be32)be32_to_cpu(e->params[i]);
+
+ if (seqno < fseqno) {
+ fseqno = seqno;
+ dinfo->first = index;
+ }
+ }
+ return 0;
+}
+
+static const struct file_operations devlog_fops = {
+ .owner = THIS_MODULE,
+ .open = devlog_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_private
+};
+
static ssize_t mem_read(struct file *file, char __user *buf, size_t count,
loff_t *ppos)
{
u32 size;
static struct t4_debugfs_entry t4_debugfs_files[] = {
+ { "devlog", &devlog_fops, S_IRUSR, 0 },
{ "l2t", &t4_l2t_fops, S_IRUSR, 0},
};
enum dev_state state;
u32 params[7], val[7];
struct fw_caps_config_cmd caps_cmd;
+ struct fw_devlog_cmd devlog_cmd;
+ u32 devlog_meminfo;
int reset = 1;
/* Contact FW, advertising Master capability */
if (ret < 0)
goto bye;
+ /* Read firmware device log parameters. We really need to find a way
+ * to get these parameters initialized with some default values (which
+ * are likely to be correct) for the case where we either don't
+ * attache to the firmware or it's crashed when we probe the adapter.
+ * That way we'll still be able to perform early firmware startup
+ * debugging ... If the request to get the Firmware's Device Log
+ * parameters fails, we'll live so we don't make that a fatal error.
+ */
+ memset(&devlog_cmd, 0, sizeof(devlog_cmd));
+ devlog_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_DEVLOG_CMD) |
+ FW_CMD_REQUEST_F | FW_CMD_READ_F);
+ devlog_cmd.retval_len16 = htonl(FW_LEN16(devlog_cmd));
+ ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd),
+ &devlog_cmd);
+ if (ret == 0) {
+ devlog_meminfo =
+ ntohl(devlog_cmd.memtype_devlog_memaddr16_devlog);
+ adap->params.devlog.memtype =
+ FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo);
+ adap->params.devlog.start =
+ FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4;
+ adap->params.devlog.size = ntohl(devlog_cmd.memsize_devlog);
+ }
+
/*
* Find out what ports are available to us. Note that we need to do
* this before calling adap_init0_no_config() since it needs nports
FW_RSS_IND_TBL_CMD = 0x20,
FW_RSS_GLB_CONFIG_CMD = 0x22,
FW_RSS_VI_CONFIG_CMD = 0x23,
+ FW_DEVLOG_CMD = 0x25,
FW_CLIP_CMD = 0x28,
FW_LASTC2E_CMD = 0x40,
FW_ERROR_CMD = 0x80,
FW_HDR_FLAGS_RESET_HALT = 0x00000001,
};
+/* length of the formatting string */
+#define FW_DEVLOG_FMT_LEN 192
+
+/* maximum number of the formatting string parameters */
+#define FW_DEVLOG_FMT_PARAMS_NUM 8
+
+/* priority levels */
+enum fw_devlog_level {
+ FW_DEVLOG_LEVEL_EMERG = 0x0,
+ FW_DEVLOG_LEVEL_CRIT = 0x1,
+ FW_DEVLOG_LEVEL_ERR = 0x2,
+ FW_DEVLOG_LEVEL_NOTICE = 0x3,
+ FW_DEVLOG_LEVEL_INFO = 0x4,
+ FW_DEVLOG_LEVEL_DEBUG = 0x5,
+ FW_DEVLOG_LEVEL_MAX = 0x5,
+};
+
+/* facilities that may send a log message */
+enum fw_devlog_facility {
+ FW_DEVLOG_FACILITY_CORE = 0x00,
+ FW_DEVLOG_FACILITY_CF = 0x01,
+ FW_DEVLOG_FACILITY_SCHED = 0x02,
+ FW_DEVLOG_FACILITY_TIMER = 0x04,
+ FW_DEVLOG_FACILITY_RES = 0x06,
+ FW_DEVLOG_FACILITY_HW = 0x08,
+ FW_DEVLOG_FACILITY_FLR = 0x10,
+ FW_DEVLOG_FACILITY_DMAQ = 0x12,
+ FW_DEVLOG_FACILITY_PHY = 0x14,
+ FW_DEVLOG_FACILITY_MAC = 0x16,
+ FW_DEVLOG_FACILITY_PORT = 0x18,
+ FW_DEVLOG_FACILITY_VI = 0x1A,
+ FW_DEVLOG_FACILITY_FILTER = 0x1C,
+ FW_DEVLOG_FACILITY_ACL = 0x1E,
+ FW_DEVLOG_FACILITY_TM = 0x20,
+ FW_DEVLOG_FACILITY_QFC = 0x22,
+ FW_DEVLOG_FACILITY_DCB = 0x24,
+ FW_DEVLOG_FACILITY_ETH = 0x26,
+ FW_DEVLOG_FACILITY_OFLD = 0x28,
+ FW_DEVLOG_FACILITY_RI = 0x2A,
+ FW_DEVLOG_FACILITY_ISCSI = 0x2C,
+ FW_DEVLOG_FACILITY_FCOE = 0x2E,
+ FW_DEVLOG_FACILITY_FOISCSI = 0x30,
+ FW_DEVLOG_FACILITY_FOFCOE = 0x32,
+ FW_DEVLOG_FACILITY_MAX = 0x32,
+};
+
+/* log message format */
+struct fw_devlog_e {
+ __be64 timestamp;
+ __be32 seqno;
+ __be16 reserved1;
+ __u8 level;
+ __u8 facility;
+ __u8 fmt[FW_DEVLOG_FMT_LEN];
+ __be32 params[FW_DEVLOG_FMT_PARAMS_NUM];
+ __be32 reserved3[4];
+};
+
+struct fw_devlog_cmd {
+ __be32 op_to_write;
+ __be32 retval_len16;
+ __u8 level;
+ __u8 r2[7];
+ __be32 memtype_devlog_memaddr16_devlog;
+ __be32 memsize_devlog;
+ __be32 r3[2];
+};
+
+#define FW_DEVLOG_CMD_MEMTYPE_DEVLOG_S 28
+#define FW_DEVLOG_CMD_MEMTYPE_DEVLOG_M 0xf
+#define FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(x) \
+ (((x) >> FW_DEVLOG_CMD_MEMTYPE_DEVLOG_S) & \
+ FW_DEVLOG_CMD_MEMTYPE_DEVLOG_M)
+
+#define FW_DEVLOG_CMD_MEMADDR16_DEVLOG_S 0
+#define FW_DEVLOG_CMD_MEMADDR16_DEVLOG_M 0xfffffff
+#define FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(x) \
+ (((x) >> FW_DEVLOG_CMD_MEMADDR16_DEVLOG_S) & \
+ FW_DEVLOG_CMD_MEMADDR16_DEVLOG_M)
+
#endif /* _T4FW_INTERFACE_H_ */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff