ARM: at91/dt: at91-kizbox: sanitize file

Consists in:
 * sorting nodes by address as possible or alphabetically,
 * adding myself as new maintainer and
 * update license.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index e07afaefcf76a8674f04ac4613fccbc79944ba03..00c86c1d0a01c2e26b8dc46bb83c0ce20d3defc6 100644 (file)
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -1,16 +1,16 @@
 /*
  * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
  *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
  *
- * Licensed under GPLv2.
+ * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
 
 / {
-
-       model = "Overkiz kizbox";
+       model = "Overkiz Kizbox";
        compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
 
        chosen {
@@ -38,10 +38,6 @@
 
        ahb {
                apb {
-                       dbgu: serial@fffff200 {
-                               status = "okay";
-                       };
-
                        usart0: serial@fffb0000 {
                                status = "okay";
                        };
@@ -57,6 +53,10 @@
                                status = "okay";
                        };
 
+                       dbgu: serial@fffff200 {
+                               status = "okay";
+                       };
+
                        watchdog@fffffd40 {
                                timeout-sec = <15>;
                                atmel,max-heartbeat-sec = <16>;
@@ -65,6 +65,11 @@
                        };
                };
 
+               usb0: ohci@00500000 {
+                       num-ports = <1>;
+                       status = "okay";
+               };
+
                nand0: nand@40000000 {
                        nand-bus-width = <8>;
                        nand-ecc-mode = "soft";
@@ -79,24 +84,36 @@
                                label = "ubi";
                                reg = <0xc0000 0x7f40000>;
                        };
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
 
+               reset {
+                       label = "reset";
+                       gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x100>;
+                       gpio-key,wakeup;
                };
 
-               usb0: ohci@00500000 {
-                       num-ports = <1>;
-                       status = "okay";
+               mode {
+                       label = "mode";
+                       gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x101>;
+                       gpio-key,wakeup;
                };
        };
 
        i2c@0 {
                status = "okay";
 
-               pcf8563@51 {
-                       /* nxp pcf8563 rtc */
+               rtc: pcf8563@51 {
                        compatible = "nxp,pcf8563";
                        reg = <0x51>;
                };
-
        };
 
        leds {
@@ -127,24 +144,4 @@
                        linux,default-trigger = "none";
                };
        };
-
-       gpio_keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x100>;
-                       gpio-key,wakeup;
-               };
-
-               mode {
-                       label = "mode";
-                       gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x101>;
-                       gpio-key,wakeup;
-               };
-       };
 };