This patch add cx23885 support for card "Mygica X8506 DMB-TH".
It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
same hardware with different branding.
Sign-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
19 -> Hauppauge WinTV-HVR1275 [0070:2215]
20 -> Hauppauge WinTV-HVR1255 [0070:2251]
21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295]
+ 22 -> Mygica X8506 DMB-TH [14f1:8651]
.name = "Hauppauge WinTV-HVR1210",
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_MYGICA_X8506] = {
+ .name = "Mygica X8506 DMB-TH",
+ .portb = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
.subvendor = 0x0070,
.subdevice = 0x2295,
.card = CX23885_BOARD_HAUPPAUGE_HVR1210,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8651,
+ .card = CX23885_BOARD_MYGICA_X8506,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
mdelay(20);
cx23885_gpio_set(dev, GPIO_9);
break;
+ case CX23885_BOARD_MYGICA_X8506:
+ /* GPIO-1 reset XC5000 */
+ /* GPIO-2 reset LGS8GL5 */
+ cx_set(GP0_IO, 0x00060000);
+ cx_clear(GP0_IO, 0x00000006);
+ mdelay(100);
+ cx_set(GP0_IO, 0x00060006);
+ mdelay(100);
+ break;
}
}
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_MYGICA_X8506:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
#include "lnbh24.h"
#include "cx24116.h"
#include "cimax2.h"
+#include "lgs8gxx.h"
#include "netup-eeprom.h"
#include "netup-init.h"
#include "lgdt3305.h"
.demod_address = 0x05,
};
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+ .prod = LGS8GXX_PROD_LGS8GL5,
+ .demod_address = 0x19,
+ .serial_ts = 0,
+ .ts_clk_pol = 1,
+ .ts_clk_gated = 1,
+ .if_clk_freq = 30400, /* 30.4 MHz */
+ .if_freq = 5380, /* 5.38 MHz */
+ .if_neg_center = 1,
+ .ext_adc = 0,
+ .adc_signed = 0,
+ .if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 5380,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
- struct cx23885_i2c *i2c_bus = NULL;
+ struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
struct videobuf_dvb_frontend *fe0;
int ret;
break;
}
break;
+ case CX23885_BOARD_MYGICA_X8506:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+ &mygica_x8506_lgs8gl5_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &mygica_x8506_xc5000_config);
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
#define CX23885_BOARD_HAUPPAUGE_HVR1275 19
#define CX23885_BOARD_HAUPPAUGE_HVR1255 20
#define CX23885_BOARD_HAUPPAUGE_HVR1210 21
+#define CX23885_BOARD_MYGICA_X8506 22
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002