* intel_mid_dma_tx_submit - callback to submit DMA transaction
* @tx: dma engine descriptor
*
- * Submit the DMA trasaction for this descriptor, start if ch idle
+ * Submit the DMA transaction for this descriptor, start if ch idle
*/
static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
static inline void
typhoon_inc_tx_index(u32 *index, const int count)
{
- /* if we start using the Hi Tx ring, this needs updateing */
+ /* if we start using the Hi Tx ring, this needs updating */
typhoon_inc_index(index, count, TXLO_ENTRIES);
}
int fw_stats_req_sz;
/*
- * FW statistics data shortcut (points at the begining of
+ * FW statistics data shortcut (points at the beginning of
* fw_stats buffer + fw_stats_req_sz).
*/
struct bnx2x_fw_stats_data *fw_stats_data;
* the current command will be enqueued to the tail of the
* pending commands list.
*
- * Return: 0 is operation was sucessfull and there are no pending completions,
+ * Return: 0 is operation was successfull and there are no pending completions,
* negative if there were errors, positive if there are pending
* completions.
*/
u16 box_reg = 0, box_extreg = 0;
u8 u1b_tmp;
bool isfw_read = false;
- bool bwrite_sucess = false;
+ bool bwrite_success = false;
u8 wait_h2c_limmit = 100;
u8 wait_writeh2c_limmit = 100;
u8 boxcontent[4], boxextcontent[2];
}
}
- while (!bwrite_sucess) {
+ while (!bwrite_success) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
break;
}
- bwrite_sucess = true;
+ bwrite_success = true;
rtlhal->last_hmeboxnum = boxnum + 1;
if (rtlhal->last_hmeboxnum == 4)
u8 u1b_tmp;
bool isfw_read = false;
u8 buf_index = 0;
- bool bwrite_sucess = false;
+ bool bwrite_success = false;
u8 wait_h2c_limmit = 100;
u8 wait_writeh2c_limmit = 100;
u8 boxcontent[4], boxextcontent[2];
break;
}
}
- while (!bwrite_sucess) {
+ while (!bwrite_success) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"switch case not processed\n");
break;
}
- bwrite_sucess = true;
+ bwrite_success = true;
rtlhal->last_hmeboxnum = boxnum + 1;
if (rtlhal->last_hmeboxnum == 4)
rtlhal->last_hmeboxnum = 0;
static void bfa_dconf_init_cb(void *arg, bfa_status_t status);
/*
- * Begining state of dconf module. Waiting for an event to start.
+ * Beginning state of dconf module. Waiting for an event to start.
*/
static void
bfa_dconf_sm_uninit(struct bfa_dconf_mod_s *dconf, enum bfa_dconf_event event)
struct bfa_diag_qtest_result_s {
u32 status;
- u16 count; /* sucessful queue test count */
+ u16 count; /* successful queue test count */
u8 queue;
u8 rsvd; /* 64-bit align */
};
* @isci_host: This parameter specifies the lldd specific wrapper for the
* libsas sas_ha struct.
*
- * This method returns an error code indicating sucess or failure. The user
+ * This method returns an error code indicating success or failure. The user
* should check for possible memory allocation error return otherwise, a zero
* indicates success.
*/
status = ireq->sci_status;
sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
} else {
- /* If receiving any non-sucess TC status, no UF
+ /* If receiving any non-success TC status, no UF
* received yet, then an UF for the status fis
* is coming after (XXX: suspect this is
* actually a protocol error or a bug like the
/* The request has already completed and there
* is nothing to do here other than to set the task
* done bit, and indicate that the task abort function
- * was sucessful.
+ * was successful.
*/
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_STATE_DONE;
* we just use some constant number as place holder.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* -ENOMEM - No availble memory
* -EIO - The mailbox failed to complete successfully.
**/
* is attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* otherwise - failed to retrieve physical port name
**/
static int
/*
* if next_fcf_pri was not set above and the list is not empty then
* we have failed flogis on all of them. So reset flogi failed
- * and start at the begining.
+ * and start at the beginning.
*/
if (!next_fcf_pri && !list_empty(&phba->fcf.fcf_pri_list)) {
list_for_each_entry(fcf_pri, &phba->fcf.fcf_pri_list, list) {
done:
platform_set_drvdata(pdev, dsim);
- dev_dbg(&pdev->dev, "%s() completed sucessfuly (%s mode)\n", __func__,
+ dev_dbg(&pdev->dev, "%s() completed successfully (%s mode)\n", __func__,
dsim_config->e_interface == DSIM_COMMAND ? "CPU" : "RGB");
return 0;
"pass: %d entering ASM\n", pass);
ds1wm_write_register(ds1wm_data, DS1WM_CMD, DS1WM_CMD_SRA);
dev_dbg(&ds1wm_data->pdev->dev,
- "pass: %d begining nibble loop\n", pass);
+ "pass: %d beginning nibble loop\n", pass);
r_prime = 0;
d = 0;
/**
* ext2_free_blocks() -- Free given blocks and update quota and i_blocks
* @inode: inode
- * @block: start physcial block to free
+ * @block: start physical block to free
* @count: number of blocks to free
*/
void ext2_free_blocks (struct inode * inode, unsigned long block,
* ext3_free_blocks_sb() -- Free given blocks and update quota
* @handle: handle to this transaction
* @sb: super block
- * @block: start physcial block to free
+ * @block: start physical block to free
* @count: number of blocks to free
* @pdquot_freed_blocks: pointer to quota
*/
*
* - Within generic_file_write() for O_SYNC files.
* Here, there will be no transaction running. We wait for any running
- * trasnaction to commit.
+ * transaction to commit.
*
* - Within sys_sync(), kupdate and such.
* We wait on commit, if tol to.
* handle: The journal handle
* inode: The files inode
* page: A locked page that contains the offset "from"
- * from: The starting byte offset (from the begining of the file)
+ * from: The starting byte offset (from the beginning of the file)
* to begin discarding
* len: The length of bytes to discard
* flags: Optional flags that may be used:
* EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED
* Only zero the regions of the page whose buffer heads
* have already been unmapped. This flag is appropriate
- * for updateing the contents of a page whose blocks may
+ * for updating the contents of a page whose blocks may
* have already been released, and we only want to zero
* out the regions that correspond to those released blocks.
*
- * Returns zero on sucess or negative on failure.
+ * Returns zero on success or negative on failure.
*/
static int ext4_discard_partial_page_buffers_no_lock(handle_t *handle,
struct inode *inode, struct page *page, loff_t from,
* @offset: The offset where the hole will begin
* @len: The length of the hole
*
- * Returns: 0 on sucess or negative on failure
+ * Returns: 0 on success or negative on failure
*/
int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)
if (i_blocks <= ~0U) {
/*
- * i_blocks can be represnted in a 32 bit variable
+ * i_blocks can be represented in a 32 bit variable
* as multiple of 512 bytes
*/
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
*
* - Within generic_file_write() for O_SYNC files.
* Here, there will be no transaction running. We wait for any running
- * trasnaction to commit.
+ * transaction to commit.
*
* - Within sys_sync(), kupdate and such.
* We wait on commit, if tol to.
* worse case, the indexs blocks spread over different block groups
*
* If datablocks are discontiguous, they are possible to spread over
- * different block groups too. If they are contiuguous, with flexbg,
+ * different block groups too. If they are contiguous, with flexbg,
* they could still across block group boundary.
*
* Also account for superblock, inode, quota and xattr blocks
* ext4_group_add_blocks() -- Add given blocks to an existing group
* @handle: handle to this transaction
* @sb: super block
- * @block: start physcial block to add to the block group
+ * @block: start physical block to add to the block group
* @count: number of blocks to free
*
* This marks the blocks as free in the bitmap and buddy.
/*
- * Trace files that want to automate creationg of all tracepoints defined
+ * Trace files that want to automate creation of all tracepoints defined
* in their file should include this file. The following are macros that the
* trace file may define:
*
};
/*
- * Proc filesystem derectory entries.
+ * Proc filesystem directory entries.
*/
/* Strings */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff