8139: convert to net_device_ops
authorStephen Hemminger <shemminger@vyatta.com>
Thu, 20 Nov 2008 06:09:07 +0000 (22:09 -0800)
committerDavid S. Miller <davem@davemloft.net>
Thu, 20 Nov 2008 06:42:46 +0000 (22:42 -0800)
Convert to new network device ops interface.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/8139cp.c
drivers/net/8139too.c

index 664bd73645cb02d9f8df4c658dc69c59a736d8ef..13f75b67872db03bb50b4b5840172d1858c2f593 100644 (file)
@@ -1817,6 +1817,25 @@ static void cp_set_d3_state (struct cp_private *cp)
        pci_set_power_state (cp->pdev, PCI_D3hot);
 }
 
+static const struct net_device_ops cp_netdev_ops = {
+       .ndo_open               = cp_open,
+       .ndo_stop               = cp_close,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_multicast_list = cp_set_rx_mode,
+       .ndo_get_stats          = cp_get_stats,
+       .ndo_do_ioctl           = cp_ioctl,
+       .ndo_tx_timeout         = cp_tx_timeout,
+#if CP_VLAN_TAG_USED
+       .ndo_vlan_rx_register   = cp_vlan_rx_register,
+#endif
+#ifdef BROKEN
+       .ndo_change_mtu         = cp_change_mtu,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       .ndo_poll_controller    = cp_poll_controller,
+#endif
+};
+
 static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
        struct net_device *dev;
@@ -1929,26 +1948,14 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
                    cpu_to_le16(read_eeprom (regs, i + 7, addr_len));
        memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
-       dev->open = cp_open;
-       dev->stop = cp_close;
-       dev->set_multicast_list = cp_set_rx_mode;
+       dev->netdev_ops = &cp_netdev_ops;
        dev->hard_start_xmit = cp_start_xmit;
-       dev->get_stats = cp_get_stats;
-       dev->do_ioctl = cp_ioctl;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-       dev->poll_controller = cp_poll_controller;
-#endif
        netif_napi_add(dev, &cp->napi, cp_rx_poll, 16);
-#ifdef BROKEN
-       dev->change_mtu = cp_change_mtu;
-#endif
        dev->ethtool_ops = &cp_ethtool_ops;
-       dev->tx_timeout = cp_tx_timeout;
        dev->watchdog_timeo = TX_TIMEOUT;
 
 #if CP_VLAN_TAG_USED
        dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-       dev->vlan_rx_register = cp_vlan_rx_register;
 #endif
 
        if (pci_using_dac)
index 37456ada44cf9b74679a187969cc19f72158668b..f8866552386a2ece2cfdb66d5d5cdb87b5225e3f 100644 (file)
@@ -916,6 +916,19 @@ err_out:
        return rc;
 }
 
+static const struct net_device_ops rtl8139_netdev_ops = {
+       .ndo_open               = rtl8139_open,
+       .ndo_stop               = rtl8139_close,
+       .ndo_get_stats          = rtl8139_get_stats,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_multicast_list = rtl8139_set_rx_mode,
+       .ndo_do_ioctl           = netdev_ioctl,
+       .ndo_tx_timeout         = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       .ndo_poll_controller    = rtl8139_poll_controller,
+#endif
+
+};
 
 static int __devinit rtl8139_init_one (struct pci_dev *pdev,
                                       const struct pci_device_id *ent)
@@ -976,19 +989,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
        memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
        /* The Rtl8139-specific entries in the device structure. */
-       dev->open = rtl8139_open;
-       dev->hard_start_xmit = rtl8139_start_xmit;
-       netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
-       dev->stop = rtl8139_close;
-       dev->get_stats = rtl8139_get_stats;
-       dev->set_multicast_list = rtl8139_set_rx_mode;
-       dev->do_ioctl = netdev_ioctl;
+       dev->netdev_ops = &rtl8139_netdev_ops;
        dev->ethtool_ops = &rtl8139_ethtool_ops;
-       dev->tx_timeout = rtl8139_tx_timeout;
        dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-       dev->poll_controller = rtl8139_poll_controller;
-#endif
+       dev->hard_start_xmit = rtl8139_start_xmit;
+       netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
 
        /* note: the hardware is not capable of sg/csum/highdma, however
         * through the use of skb_copy_and_csum_dev we enable these