* the hypervisor and Linux.
*/
+/*
+ * WARNING - magic here
+ *
+ * Ok, this is a horrid hack below, but marginally better than the
+ * alternatives. What we really want is just to initialize
+ * hvReleaseData in C as in the #if 0 section here. However, gcc
+ * refuses to believe that (u32)&x is a constant expression, so will
+ * not allow the xMsNucDataOffset field to be properly initialized.
+ * So, we declare hvReleaseData in inline asm instead. We use inline
+ * asm, rather than a .S file, because the assembler won't generate
+ * the necessary relocation for the LparMap either, unless that symbol
+ * is declared in the same source file. Finally, we put the asm in a
+ * dummy, attribute-used function, instead of at file scope, because
+ * file scope asms don't allow contraints. We want to use the "i"
+ * constraints to put sizeof() and offsetof() expressions in there,
+ * because including asm/offsets.h in C code then stringifying causes
+ * all manner of warnings.
+ */
+#if 0
struct HvReleaseData hvReleaseData = {
.xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */
.xSize = sizeof(struct HvReleaseData),
.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
.xSlicNacaAddr = &naca, /* 64-bit Naca address */
- .xMsNucDataOffset = 0x4800, /* offset of LparMap within loadarea (see head.S) */
- .xTagsMode = 1, /* tags inactive */
- .xAddressSize = 0, /* 64 bit */
- .xNoSharedProcs = 0, /* shared processors */
- .xNoHMT = 0, /* HMT allowed */
- .xRsvd2 = 6, /* TEMP: This allows non-GA driver */
+ .xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE),
+ .xFlags = HVREL_TAGSINACTIVE /* tags inactive */
+ /* 64 bit */
+ /* shared processors */
+ /* HMT allowed */
+ | 6, /* TEMP: This allows non-GA driver */
.xVrmIndex = 4, /* We are v5r2m0 */
.xMinSupportedPlicVrmIndex = 3, /* v5r1m0 */
.xMinCompatablePlicVrmIndex = 3, /* v5r1m0 */
0xa7, 0x40, 0xf2, 0x4b,
0xf4, 0x4b, 0xf6, 0xf4 },
};
+#endif
+
+
+extern struct HvReleaseData hvReleaseData;
+
+static void __attribute_used__ hvReleaseData_wrapper(void)
+{
+ /* This doesn't appear to need any alignment (even 4 byte) */
+ asm volatile (
+ " lparMapPhys = xLparMap - %3\n"
+ " .data\n"
+ " .globl hvReleaseData\n"
+ "hvReleaseData:\n"
+ " .long 0xc8a5d9c4\n" /* xDesc */
+ /* "HvRD" in ebcdic */
+ " .short %0\n" /* xSize */
+ " .short %1\n" /* xVpdAreasPtrOffset */
+ " .llong naca\n" /* xSlicNacaAddr */
+ " .long lparMapPhys\n" /* xMsNucDataOffset */
+ " .long 0\n" /* xRsvd1 */
+ " .short %2\n" /* xFlags */
+ " .short 4\n" /* xVrmIndex - v5r2m0 */
+ " .short 3\n" /* xMinSupportedPlicVrmIndex - v5r1m0 */
+ " .short 3\n" /* xMinCompatablePlicVrmIndex - v5r1m0 */
+ " .long 0xd38995a4\n" /* xVrmName */
+ " .long 0xa740f24b\n" /* "Linux 2.4.64" ebcdic */
+ " .long 0xf44bf6f4\n"
+ " . = hvReleaseData + %0\n"
+ " .previous\n"
+ : : "i"(sizeof(hvReleaseData)),
+ "i"(offsetof(struct naca_struct, xItVpdAreas)),
+ "i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */
+ /* shared processors, HMT allowed */
+ | 6), /* TEMP: This allows non-GA drivers */
+ "i"(KERNELBASE)
+ );
+}
+
+struct LparMap __attribute__((aligned (16))) xLparMap = {
+ .xNumberEsids = HvEsidsToMap,
+ .xNumberRanges = HvRangesToMap,
+ .xSegmentTableOffs = STAB0_PAGE,
+
+ .xEsids = {
+ { .xKernelEsid = GET_ESID(KERNELBASE),
+ .xKernelVsid = KERNEL_VSID(KERNELBASE), },
+ { .xKernelEsid = GET_ESID(VMALLOCBASE),
+ .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
+ },
+
+ .xRanges = {
+ { .xPages = HvPagesToMap,
+ .xOffset = 0,
+ .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
+ },
+ },
+};
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);
#ifdef CONFIG_PPC_ISERIES
.globl naca
naca:
- .llong itVpdAreas
-
- /*
- * The iSeries LPAR map is at this fixed address
- * so that the HvReleaseData structure can address
- * it with a 32-bit offset.
- *
- * The VSID values below are dependent on the
- * VSID generation algorithm. See include/asm/mmu_context.h.
- */
-
- . = 0x4800
-
- .llong 2 /* # ESIDs to be mapped by hypervisor */
- .llong 1 /* # memory ranges to be mapped by hypervisor */
- .llong STAB0_PAGE /* Page # of segment table within load area */
- .llong 0 /* Reserved */
- .llong 0 /* Reserved */
- .llong 0 /* Reserved */
- .llong 0 /* Reserved */
- .llong 0 /* Reserved */
- .llong (KERNELBASE>>SID_SHIFT)
- .llong 0x408f92c94 /* KERNELBASE VSID */
- /* We have to list the bolted VMALLOC segment here, too, so that it
- * will be restored on shared processor switch */
- .llong (VMALLOCBASE>>SID_SHIFT)
- .llong 0xf09b89af5 /* VMALLOCBASE VSID */
- .llong 8192 /* # pages to map (32 MB) */
- .llong 0 /* Offset from start of loadarea to start of map */
- .llong 0x408f92c940000 /* VPN of first page to map */
+ .llong itVpdAreas
+ .llong 0 /* xRamDisk */
+ .llong 0 /* xRamDiskSize */
. = 0x6100
* know that this PLIC does not support running an OS "that old".
*/
+#define HVREL_TAGSINACTIVE 0x8000
+#define HVREL_32BIT 0x4000
+#define HVREL_NOSHAREDPROCS 0x2000
+#define HVREL_NOHMT 0x1000
+
struct HvReleaseData {
u32 xDesc; /* Descriptor "HvRD" ebcdic x00-x03 */
u16 xSize; /* Size of this control block x04-x05 */
struct naca_struct *xSlicNacaAddr; /* Virt addr of SLIC NACA x08-x0F */
u32 xMsNucDataOffset; /* Offset of Linux Mapping Data x10-x13 */
u32 xRsvd1; /* Reserved x14-x17 */
- u16 xTagsMode:1; /* 0 == tags active, 1 == tags inactive */
- u16 xAddressSize:1; /* 0 == 64-bit, 1 == 32-bit */
- u16 xNoSharedProcs:1; /* 0 == shared procs, 1 == no shared */
- u16 xNoHMT:1; /* 0 == allow HMT, 1 == no HMT */
- u16 xRsvd2:12; /* Reserved x18-x19 */
+ u16 xFlags;
u16 xVrmIndex; /* VRM Index of OS image x1A-x1B */
u16 xMinSupportedPlicVrmIndex; /* Min PLIC level (soft) x1C-x1D */
u16 xMinCompatablePlicVrmIndex; /* Min PLIC levelP (hard) x1E-x1F */
* entry to map the Esid to the Vsid.
*/
+#define HvEsidsToMap 2
+#define HvRangesToMap 1
+
/* Hypervisor initially maps 32MB of the load area */
#define HvPagesToMap 8192
struct LparMap {
- u64 xNumberEsids; // Number of ESID/VSID pairs (1)
- u64 xNumberRanges; // Number of VA ranges to map (1)
- u64 xSegmentTableOffs; // Page number within load area of seg table (0)
+ u64 xNumberEsids; // Number of ESID/VSID pairs
+ u64 xNumberRanges; // Number of VA ranges to map
+ u64 xSegmentTableOffs; // Page number within load area of seg table
u64 xRsvd[5];
- u64 xKernelEsid; // Esid used to map kernel load (0x0C00000000)
- u64 xKernelVsid; // Vsid used to map kernel load (0x0C00000000)
- u64 xPages; // Number of pages to be mapped (8192)
- u64 xOffset; // Offset from start of load area (0)
- u64 xVPN; // Virtual Page Number (0x000C000000000000)
+ struct {
+ u64 xKernelEsid; // Esid used to map kernel load
+ u64 xKernelVsid; // Vsid used to map kernel load
+ } xEsids[HvEsidsToMap];
+ struct {
+ u64 xPages; // Number of pages to be mapped
+ u64 xOffset; // Offset from start of load area
+ u64 xVPN; // Virtual Page Number
+ } xRanges[HvRangesToMap];
};
extern struct LparMap xLparMap;
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff