usb: dwc3: exynos: Fix deferred probing storm.

dwc3-exynos has two problems during init if the regulators are slow
to come up (for instance if the I2C bus driver is not on the initramfs)
and return probe deferral. First, every time this happens, the driver
leaks the USB phys created; they need to be deallocated on error.

Second, since the phy devices are created before the regulators fail,
this means that there's a new device to re-trigger deferred probing,
which causes it to essentially go into a busy loop of re-probing the
device until the regulators come up.

Move the phy creation to after the regulators have succeeded, and also
fix cleanup on failure. On my ODROID XU4 system (with Debian's initramfs
which doesn't contain the I2C driver), this reduces the number of probe
attempts (for each of the two controllers) from more than 2000 to eight.

Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Vivek Gautam <gautam.vivek@samsung.com>
Fixes: d720f057fda4 ("usb: dwc3: exynos: add nop transceiver support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index dd5cb5577dcaf62d411fb9776e47a23d4a4dacf7..2f1fb7e7aa548f831fb9cfa63d24513c292d15b4 100644 (file)
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -128,12 +128,6 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, exynos);
 
-       ret = dwc3_exynos_register_phys(exynos);
-       if (ret) {
-               dev_err(dev, "couldn't register PHYs\n");
-               return ret;
-       }
-
        exynos->dev     = dev;
 
        exynos->clk = devm_clk_get(dev, "usbdrd30");
@@ -183,20 +177,29 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
                goto err3;
        }
 
+       ret = dwc3_exynos_register_phys(exynos);
+       if (ret) {
+               dev_err(dev, "couldn't register PHYs\n");
+               goto err4;
+       }
+
        if (node) {
                ret = of_platform_populate(node, NULL, NULL, dev);
                if (ret) {
                        dev_err(dev, "failed to add dwc3 core\n");
-                       goto err4;
+                       goto err5;
                }
        } else {
                dev_err(dev, "no device node, failed to add dwc3 core\n");
                ret = -ENODEV;
-               goto err4;
+               goto err5;
        }
 
        return 0;
 
+err5:
+       platform_device_unregister(exynos->usb2_phy);
+       platform_device_unregister(exynos->usb3_phy);
 err4:
        regulator_disable(exynos->vdd10);
 err3: