ARM: tegra: Use consistent indentation for SATA node

The indentation for properties in the SATA device tree node on Tegra124
deviates from the rest of the device tree file. Restore consistency and
get rid of a couple of gratuitous blank lines while at it.

Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index a5c878edd44e392335b9baa7a041f52873d9b1a5..8aa6e96b5b5c3a75b34c195d9c9f29222a9ad007 100644 (file)
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -608,26 +608,20 @@
 
        sata@0,70020000 {
                compatible = "nvidia,tegra124-ahci";
-
                reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
-                       <0x0 0x70020000 0x0 0x7000>; /* SATA */
-
+                     <0x0 0x70020000 0x0 0x7000>; /* SATA */
                interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-
                clocks = <&tegra_car TEGRA124_CLK_SATA>,
-                       <&tegra_car TEGRA124_CLK_SATA_OOB>,
-                       <&tegra_car TEGRA124_CLK_CML1>,
-                       <&tegra_car TEGRA124_CLK_PLL_E>;
+                        <&tegra_car TEGRA124_CLK_SATA_OOB>,
+                        <&tegra_car TEGRA124_CLK_CML1>,
+                        <&tegra_car TEGRA124_CLK_PLL_E>;
                clock-names = "sata", "sata-oob", "cml1", "pll_e";
-
                resets = <&tegra_car 124>,
-                       <&tegra_car 123>,
-                       <&tegra_car 129>;
+                        <&tegra_car 123>,
+                        <&tegra_car 129>;
                reset-names = "sata", "sata-oob", "sata-cold";
-
                phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
                phy-names = "sata-phy";
-
                status = "disabled";
        };