Only OMAP2+ platforms have the System Control Module (SCM) IP block.
In the past, we've kept the SCM header file in plat-omap. This has
led to abuse - device drivers including it; includes being added that
create implicit dependencies on OMAP2+ builds; etc.
In response, move the SCM headers into mach-omap2/.
As part of this, remove the direct SCM access from the OMAP UDC
driver. It was clearly broken. The UDC code needs an indepth review for
use on OMAP2+ chips.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
#include <plat/gpmc.h>
#include <plat/display.h>
-#include <plat/control.h>
#include <plat/gpmc-smc91x.h>
#include "board-flash.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
#include "pm.h"
+#include "control.h"
#define CONFIG_DISABLE_HFCLK 1
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/control.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include "hsmmc.h"
#include "timer-gp.h"
+#include "control.h"
#define ETH_KS8851_IRQ 34
#define ETH_KS8851_POWER_ON 48
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/control.h>
#include <plat/usb.h>
#include <plat/display.h>
#include "mux.h"
+#include "control.h"
#define AM35XX_EVM_PHY_MASK (0xF)
#define AM35XX_EVM_MDIO_FREQUENCY (1000000)
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
-#include <plat/control.h>
#include "mux.h"
+#include "control.h"
/* LED & Switch macros */
#define LED0_GPIO13 13
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/control.h>
#include <plat/usb.h>
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <mach/am35xx.h>
#include "mux.h"
+#include "control.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/control.h>
#include <mach/gpio.h>
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/gpmc.h>
#include "mux.h"
+#include "control.h"
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
#include <mach/board-zoom.h>
#include <asm/delay.h>
-#include <plat/control.h>
#include <plat/usb.h>
#include "board-flash.h"
#include "mux.h"
#include "hsmmc.h"
+#include "control.h"
#define LDP_SMSC911X_CS 1
#define LDP_SMSC911X_GPIO 152
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
+#include "control.h"
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/gpmc-smsc911x.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
-#include <plat/control.h>
#define OMAP3LOGIC_SMSC911X_CS 1
#include <plat/board.h>
#include <plat/common.h>
-#include <plat/control.h>
#include <plat/usb.h>
#include <plat/mmc.h>
-#include "hsmmc.h"
#include "timer-gp.h"
+#include "hsmmc.h"
+#include "control.h"
static struct gpio_led gpio_leds[] = {
{
#include <linux/list.h>
#include <plat/clkdev_omap.h>
-#include <plat/control.h>
#include "clock.h"
#include "clock2xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "control.h"
#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
#include <linux/list.h>
#include <plat/clkdev_omap.h>
-#include <plat/control.h>
#include "clock.h"
#include "clock2xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "control.h"
#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/control.h>
#include <plat/clkdev_omap.h>
#include "clock.h"
#include "cm-regbits-34xx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
+#include "control.h"
/*
* clocks
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
-#include <plat/control.h>
#include <plat/clkdev_omap.h>
#include "clock.h"
#include "cm-regbits-44xx.h"
#include "prm.h"
#include "prm-regbits-44xx.h"
+#include "control.h"
/* Root clocks */
#include <plat/common.h>
#include <plat/board.h>
-#include <plat/control.h>
#include <plat/mux.h>
#include <plat/clock.h>
#include "sdrc.h"
+#include "control.h"
/* Global address base setup code */
#include <linux/io.h>
#include <plat/common.h>
-#include <plat/control.h>
#include <plat/sdrc.h>
+
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
#include "cm.h"
#include "prm.h"
#include "sdrc.h"
#include "pm.h"
+#include "control.h"
static void __iomem *omap2_ctrl_base;
static void __iomem *omap4_ctrl_pad_base;
--- /dev/null
+/*
+ * arch/arm/mach-omap2/control.h
+ *
+ * OMAP2/3/4 System Control Module definitions
+ *
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
+#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
+
+#include <mach/io.h>
+#include <mach/ctrl_module_core_44xx.h>
+#include <mach/ctrl_module_wkup_44xx.h>
+#include <mach/ctrl_module_pad_core_44xx.h>
+#include <mach/ctrl_module_pad_wkup_44xx.h>
+
+#ifndef __ASSEMBLY__
+#define OMAP242X_CTRL_REGADDR(reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE 0x000
+#define OMAP2_CONTROL_PADCONFS 0x030
+#define OMAP2_CONTROL_GENERAL 0x270
+#define OMAP343X_CONTROL_MEM_WKUP 0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198)
+#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4)
+
+#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \
+ + ((i) >> 1) * 4 + (!((i) & 1)) * 2)
+#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4)
+#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8)
+#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0)
+#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4)
+#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8)
+#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC)
+#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4)
+#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8)
+#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0)
+#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4)
+
+/* AM35XX only CONTROL_GENERAL register offsets */
+#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)
+#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310)
+#define AM35XX_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314)
+#define AM35XX_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320)
+#define AM35XX_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324)
+#define AM35XX_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328)
+#define AM35XX_CONTROL_IPSS_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C)
+
+/* 34xx PADCONF register offsets */
+#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \
+ (i)*2)
+#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0)
+#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1)
+#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2)
+#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3)
+#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4)
+#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5)
+#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6)
+#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7)
+#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8)
+#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9)
+#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10)
+#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11)
+#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12)
+#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13)
+#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14)
+#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15)
+#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16)
+#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
+
+/* 34xx GENERAL_WKUP regist offsets */
+#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
+ 0x008 + (i))
+#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
+#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
+#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
+#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
+#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
+
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file. Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */
+#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
+#define OMAP2_MCBSP1_FSR_MASK (1 << 4)
+#define OMAP2_MCBSP1_CLKR_MASK (1 << 3)
+#define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31)
+#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */
+#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK (0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK (1 << 5)
+#define OMAP2_SYSBOOT_4_MASK (1 << 4)
+#define OMAP2_SYSBOOT_3_MASK (1 << 3)
+#define OMAP2_SYSBOOT_2_MASK (1 << 2)
+#define OMAP2_SYSBOOT_1_MASK (1 << 1)
+#define OMAP2_SYSBOOT_0_MASK (1 << 0)
+
+/* CONTROL_PBIAS_LITE bits */
+#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15)
+#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11)
+#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10)
+#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9)
+#define OMAP343X_PBIASLITEVMODE1 (1 << 8)
+#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7)
+#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3)
+#define OMAP2_PBIASSPEEDCTRL0 (1 << 2)
+#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
+#define OMAP2_PBIASLITEVMODE0 (1 << 0)
+
+/* CONTROL_PROG_IO1 bits */
+#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20)
+
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT 0
+#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+
+#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860)
+#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
+#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
+
+/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
+#define AM35XX_USBOTG_FCLK_SHIFT 8
+#define AM35XX_CPGMAC_FCLK_SHIFT 9
+#define AM35XX_VPFE_FCLK_SHIFT 10
+
+/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
+#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
+#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
+#define AM35XX_CPGMAC_C0_TX_PULSE_CLR BIT(3)
+#define AM35XX_USBOTGSS_INT_CLR BIT(4)
+#define AM35XX_VPFE_CCDC_VD0_INT_CLR BIT(5)
+#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
+#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
+
+/*AM35XX CONTROL_IP_SW_RESET bits*/
+#define AM35XX_USBOTGSS_SW_RST BIT(0)
+#define AM35XX_CPGMACSS_SW_RST BIT(1)
+#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
+#define AM35XX_HECC_SW_RST BIT(3)
+#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
+
+/*
+ * CONTROL OMAP STATUS register to identify OMAP3 features
+ */
+#define OMAP3_CONTROL_OMAP_STATUS 0x044c
+
+#define OMAP3_SGX_SHIFT 13
+#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT)
+#define FEAT_SGX_FULL 0
+#define FEAT_SGX_HALF 1
+#define FEAT_SGX_NONE 2
+
+#define OMAP3_IVA_SHIFT 12
+#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT)
+#define FEAT_IVA 0
+#define FEAT_IVA_NONE 1
+
+#define OMAP3_L2CACHE_SHIFT 10
+#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT)
+#define FEAT_L2CACHE_NONE 0
+#define FEAT_L2CACHE_64KB 1
+#define FEAT_L2CACHE_128KB 2
+#define FEAT_L2CACHE_256KB 3
+
+#define OMAP3_ISP_SHIFT 5
+#define OMAP3_ISP_MASK (1 << OMAP3_ISP_SHIFT)
+#define FEAT_ISP 0
+#define FEAT_ISP_NONE 1
+
+#define OMAP3_NEON_SHIFT 4
+#define OMAP3_NEON_MASK (1 << OMAP3_NEON_SHIFT)
+#define FEAT_NEON 0
+#define FEAT_NEON_NONE 1
+
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARCH_OMAP2PLUS
+extern void __iomem *omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern u32 omap4_ctrl_pad_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
+
+extern void omap3_save_scratchpad_contents(void);
+extern void omap3_clear_scratchpad_contents(void);
+extern u32 *get_restore_pointer(void);
+extern u32 *get_es3_restore_pointer(void);
+extern u32 omap3_arm_context[128];
+extern void omap3_control_save_context(void);
+extern void omap3_control_restore_context(void);
+
+#else
+#define omap_ctrl_base_get() 0
+#define omap_ctrl_readb(x) 0
+#define omap_ctrl_readw(x) 0
+#define omap_ctrl_readl(x) 0
+#define omap4_ctrl_pad_readl(x) 0
+#define omap_ctrl_writeb(x, y) WARN_ON(1)
+#define omap_ctrl_writew(x, y) WARN_ON(1)
+#define omap_ctrl_writel(x, y) WARN_ON(1)
+#define omap4_ctrl_pad_writel(x, y) WARN_ON(1)
+#endif
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */
+
#include <plat/irqs.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
-#include <plat/control.h>
#include <plat/serial.h>
#include "pm.h"
+#include "control.h"
#ifdef CONFIG_CPU_IDLE
* (at your option) any later version.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
-#include <plat/control.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <mach/gpio.h>
#include <plat/omap_device.h>
#include "mux.h"
+#include "control.h"
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
#include <linux/string.h>
#include <linux/delay.h>
#include <mach/hardware.h>
-#include <plat/control.h>
#include <plat/mmc.h>
#include <plat/omap-pm.h>
#include "hsmmc.h"
+#include "control.h"
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
#include <asm/cputype.h>
#include <plat/common.h>
-#include <plat/control.h>
#include <plat/cpu.h>
#include <mach/id.h>
+#include "control.h"
+
static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
#include <plat/dma.h>
#include <plat/cpu.h>
#include <plat/mcbsp.h>
-#include <plat/control.h>
+
+#include "control.h"
+
/* McBSP internal signal muxing functions */
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
-#include <linux/module.h>
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <asm/system.h>
-#include <plat/control.h>
-
+#include "control.h"
#include "mux.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#include <mach/irqs.h>
#include <plat/clock.h>
#include <plat/sram.h>
-#include <plat/control.h>
#include <plat/dma.h>
#include <plat/board.h>
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "pm.h"
+#include "control.h"
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
#include <plat/powerdomain.h>
-#include <plat/control.h>
#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
#include "prm.h"
#include "pm.h"
#include "sdrc.h"
+#include "control.h"
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0x31
#include <plat/common.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
-#include <plat/control.h>
#include "clock.h"
#include "clock2xxx.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-44xx.h"
+#include "control.h"
static void __iomem *prm_base;
static void __iomem *cm_base;
#include <plat/common.h>
#include <plat/board.h>
#include <plat/clock.h>
-#include <plat/control.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include "pm.h"
#include "cm.h"
#include "prm-regbits-34xx.h"
+#include "control.h"
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
#define UART_OMAP_WER 0x17 /* Wake-up enable register */
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <plat/control.h>
#include "cm.h"
#include "prm.h"
#include "sdrc.h"
+#include "control.h"
#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c
#include <asm/irq.h>
-#include <plat/control.h>
#include <plat/usb.h>
#include <plat/board.h>
+#include "control.h"
+#include "mux.h"
+
#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN
#define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO
#define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO
#define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN
#define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG
-#include "mux.h"
-
#if defined(CONFIG_ARCH_OMAP2)
#ifdef CONFIG_USB_GADGET_OMAP
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/control.h
- *
- * OMAP2/3/4 System Control Module definitions
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
-#include <mach/io.h>
-#include <mach/ctrl_module_core_44xx.h>
-#include <mach/ctrl_module_wkup_44xx.h>
-#include <mach/ctrl_module_pad_core_44xx.h>
-#include <mach/ctrl_module_pad_wkup_44xx.h>
-
-#ifndef __ASSEMBLY__
-#define OMAP242X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#else
-#define OMAP242X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg) \
- OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#endif /* __ASSEMBLY__ */
-
-/*
- * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
- * OMAP24XX and OMAP34XX.
- */
-
-/* Control submodule offsets */
-
-#define OMAP2_CONTROL_INTERFACE 0x000
-#define OMAP2_CONTROL_PADCONFS 0x030
-#define OMAP2_CONTROL_GENERAL 0x270
-#define OMAP343X_CONTROL_MEM_WKUP 0x600
-#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
-#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
-
-/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
-
-#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10)
-
-/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
-#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004)
-#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020)
-#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024)
-#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028)
-#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c)
-#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030)
-#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034)
-#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040)
-#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090)
-#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094)
-#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098)
-#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c)
-
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198)
-#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4)
-
-#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
-
-/* 34xx-only CONTROL_GENERAL register offsets */
-#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c)
-#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068)
-#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4)
-#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8)
-#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec)
-#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0)
-#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4)
-#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8)
-#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
-#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \
- + ((i) >> 1) * 4 + (!((i) & 1)) * 2)
-#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4)
-#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8)
-#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0)
-#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4)
-#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8)
-#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC)
-#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0)
-#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4)
-#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8)
-#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0)
-#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4)
-
-/* AM35XX only CONTROL_GENERAL register offsets */
-#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)
-#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310)
-#define AM35XX_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314)
-#define AM35XX_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320)
-#define AM35XX_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324)
-#define AM35XX_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328)
-#define AM35XX_CONTROL_IPSS_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C)
-
-/* 34xx PADCONF register offsets */
-#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \
- (i)*2)
-#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0)
-#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1)
-#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2)
-#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3)
-#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4)
-#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5)
-#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6)
-#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7)
-#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8)
-#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9)
-#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10)
-#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11)
-#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12)
-#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13)
-#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14)
-#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15)
-#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16)
-#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
-
-/* 34xx GENERAL_WKUP regist offsets */
-#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
- 0x008 + (i))
-#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
-#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
-#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
-#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
-#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
-
-/* 34xx D2D idle-related pins, handled by PM core */
-#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
-#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
-
-/*
- * REVISIT: This list of registers is not comprehensive - there are more
- * that should be added.
- */
-
-/*
- * Control module register bit defines - these should eventually go into
- * their own regbits file. Some of these will be complicated, depending
- * on the device type (general-purpose, emulator, test, secure, bad, other)
- * and the security mode (secure, non-secure, don't care)
- */
-/* CONTROL_DEVCONF0 bits */
-#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */
-#define OMAP24XX_USBSTANDBYCTRL (1 << 15)
-#define OMAP2_MCBSP2_CLKS_MASK (1 << 6)
-#define OMAP2_MCBSP1_FSR_MASK (1 << 4)
-#define OMAP2_MCBSP1_CLKR_MASK (1 << 3)
-#define OMAP2_MCBSP1_CLKS_MASK (1 << 2)
-
-/* CONTROL_DEVCONF1 bits */
-#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31)
-#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */
-#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */
-#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */
-#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */
-
-/* CONTROL_STATUS bits */
-#define OMAP2_DEVICETYPE_MASK (0x7 << 8)
-#define OMAP2_SYSBOOT_5_MASK (1 << 5)
-#define OMAP2_SYSBOOT_4_MASK (1 << 4)
-#define OMAP2_SYSBOOT_3_MASK (1 << 3)
-#define OMAP2_SYSBOOT_2_MASK (1 << 2)
-#define OMAP2_SYSBOOT_1_MASK (1 << 1)
-#define OMAP2_SYSBOOT_0_MASK (1 << 0)
-
-/* CONTROL_PBIAS_LITE bits */
-#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15)
-#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11)
-#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10)
-#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9)
-#define OMAP343X_PBIASLITEVMODE1 (1 << 8)
-#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7)
-#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3)
-#define OMAP2_PBIASSPEEDCTRL0 (1 << 2)
-#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
-#define OMAP2_PBIASLITEVMODE0 (1 << 0)
-
-/* CONTROL_PROG_IO1 bits */
-#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20)
-
-/* CONTROL_IVA2_BOOTMOD bits */
-#define OMAP3_IVA2_BOOTMOD_SHIFT 0
-#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0)
-#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0)
-
-/* CONTROL_PADCONF_X bits */
-#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
-#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
-
-#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860)
-#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
-#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
-
-/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT 3
-#define AM35XX_USBOTG_FCLK_SHIFT 8
-#define AM35XX_CPGMAC_FCLK_SHIFT 9
-#define AM35XX_VPFE_FCLK_SHIFT 10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
-#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0)
-#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1)
-#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2)
-#define AM35XX_CPGMAC_C0_TX_PULSE_CLR BIT(3)
-#define AM35XX_USBOTGSS_INT_CLR BIT(4)
-#define AM35XX_VPFE_CCDC_VD0_INT_CLR BIT(5)
-#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6)
-#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7)
-
-/*AM35XX CONTROL_IP_SW_RESET bits*/
-#define AM35XX_USBOTGSS_SW_RST BIT(0)
-#define AM35XX_CPGMACSS_SW_RST BIT(1)
-#define AM35XX_VPFE_VBUSP_SW_RST BIT(2)
-#define AM35XX_HECC_SW_RST BIT(3)
-#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
-
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
-#define OMAP3_CONTROL_OMAP_STATUS 0x044c
-
-#define OMAP3_SGX_SHIFT 13
-#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT)
-#define FEAT_SGX_FULL 0
-#define FEAT_SGX_HALF 1
-#define FEAT_SGX_NONE 2
-
-#define OMAP3_IVA_SHIFT 12
-#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT)
-#define FEAT_IVA 0
-#define FEAT_IVA_NONE 1
-
-#define OMAP3_L2CACHE_SHIFT 10
-#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT)
-#define FEAT_L2CACHE_NONE 0
-#define FEAT_L2CACHE_64KB 1
-#define FEAT_L2CACHE_128KB 2
-#define FEAT_L2CACHE_256KB 3
-
-#define OMAP3_ISP_SHIFT 5
-#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT)
-#define FEAT_ISP 0
-#define FEAT_ISP_NONE 1
-
-#define OMAP3_NEON_SHIFT 4
-#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT)
-#define FEAT_NEON 0
-#define FEAT_NEON_NONE 1
-
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_ARCH_OMAP2PLUS
-extern void __iomem *omap_ctrl_base_get(void);
-extern u8 omap_ctrl_readb(u16 offset);
-extern u16 omap_ctrl_readw(u16 offset);
-extern u32 omap_ctrl_readl(u16 offset);
-extern u32 omap4_ctrl_pad_readl(u16 offset);
-extern void omap_ctrl_writeb(u8 val, u16 offset);
-extern void omap_ctrl_writew(u16 val, u16 offset);
-extern void omap_ctrl_writel(u32 val, u16 offset);
-extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
-
-extern void omap3_save_scratchpad_contents(void);
-extern void omap3_clear_scratchpad_contents(void);
-extern u32 *get_restore_pointer(void);
-extern u32 *get_es3_restore_pointer(void);
-extern u32 omap3_arm_context[128];
-extern void omap3_control_save_context(void);
-extern void omap3_control_restore_context(void);
-
-#else
-#define omap_ctrl_base_get() 0
-#define omap_ctrl_readb(x) 0
-#define omap_ctrl_readw(x) 0
-#define omap_ctrl_readl(x) 0
-#define omap4_ctrl_pad_readl(x) 0
-#define omap_ctrl_writeb(x, y) WARN_ON(1)
-#define omap_ctrl_writew(x, y) WARN_ON(1)
-#define omap_ctrl_writel(x, y) WARN_ON(1)
-#define omap4_ctrl_pad_writel(x, y) WARN_ON(1)
-#endif
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_CONTROL_H */
-
#include <linux/serial_core.h>
#include <linux/platform_device.h>
-#include <plat/control.h>
#include <plat/mux.h>
#define DRIVER_NAME "omap-hsuart"
#include <plat/dma.h>
#include <plat/mcbsp.h>
-#include <plat/control.h>
#include "../mach-omap2/cm-regbits-34xx.h"
#include <plat/dma.h>
#include <plat/usb.h>
-#include <plat/control.h>
#include "omap_udc.h"
static int proc_otg_show(struct seq_file *s)
{
u32 tmp;
- u32 trans;
- char *ctrl_name;
+ u32 trans = 0;
+ char *ctrl_name = "(UNKNOWN)";
+ /* XXX This needs major revision for OMAP2+ */
tmp = omap_readl(OTG_REV);
- if (cpu_is_omap24xx()) {
- /*
- * REVISIT: Not clear how this works on OMAP2. trans
- * is ANDed to produce bits 7 and 8, which might make
- * sense for USB_TRANSCEIVER_CTRL on OMAP1,
- * but with CONTROL_DEVCONF, these bits have something to
- * do with the frame adjustment counter and McBSP2.
- */
- ctrl_name = "control_devconf";
- trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- } else {
+ if (cpu_class_is_omap1()) {
ctrl_name = "tranceiver_ctrl";
trans = omap_readw(USB_TRANSCEIVER_CTRL);
}
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff