V4L/DVB (12501): gspca - sonixj: Do the ov7660 sensor work again.

- bad sensor power
- bad edge gain/threshold
- set back the auto gain
- light frequency filter inverted

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index f0b762f770fbab04a32eaa59e39c3fe8fbfd0983..3c82c00a42b2ebf3de76030075040f0d3a00261f 100644 (file)
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -733,7 +733,7 @@ static const u8 ov7660_sensor_init[][8] = {
                                                /* COM 1 BAVE GEAVE AECHH */
        {0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */
        {0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */
-       {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10},
+       {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10},
                                                /* AECH CLKRC COM7 COM8 */
        {0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */
        {0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10},
@@ -783,7 +783,7 @@ static const u8 ov7660_sensor_init[][8] = {
        {0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
        {0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
        {0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
-       {0xb1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
+       {0xa1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
 /****** (some exchanges in the win trace) ******/
        {0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
                                                /* bits[3..0]reserved */
@@ -1145,11 +1145,6 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
                reg_w1(gspca_dev, 0x01, 0x42);
                break;
        case SENSOR_OV7660:
-               reg_w1(gspca_dev, 0x01, 0x61);
-               reg_w1(gspca_dev, 0x17, 0x20);
-               reg_w1(gspca_dev, 0x01, 0x60);
-               reg_w1(gspca_dev, 0x01, 0x40);
-               break;
        case SENSOR_SP80708:
                reg_w1(gspca_dev, 0x01, 0x63);
                reg_w1(gspca_dev, 0x17, 0x20);
@@ -1624,6 +1619,8 @@ static void setvflip(struct sd *sd)
 
 static void setinfrared(struct sd *sd)
 {
+       if (sd->gspca_dev.ctrl_dis & (1 << INFRARED_IDX))
+               return;
 /*fixme: different sequence for StarCam Clip and StarCam 370i */
 /* Clip */
        i2c_w1(&sd->gspca_dev, 0x02,                    /* gpio */
@@ -1639,10 +1636,10 @@ static void setfreq(struct gspca_dev *gspca_dev)
        if (sd->sensor == SENSOR_OV7660) {
                u8 com8;
 
-               com8 = 0xf8;            /* no auto gain/wb/expo */
+               com8 = 0xdf;            /* auto gain/wb/expo */
                switch (sd->freq) {
                case 0: /* Banding filter disabled */
-                       i2c_w1(gspca_dev, 0x13, com8 & 0xdf);
+                       i2c_w1(gspca_dev, 0x13, com8 | 0x20);
                        break;
                case 1: /* 50 hz */
                        i2c_w1(gspca_dev, 0x13, com8);
@@ -1799,12 +1796,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
                reg_w1(gspca_dev, 0x99, 0x60);
                break;
        case SENSOR_OV7660:
-               reg_w1(gspca_dev, 0x9a, 0x05);
-               if (sd->bridge == BRIDGE_SN9C105)
-                       reg_w1(gspca_dev, 0x99, 0xff);
-               else
-                       reg_w1(gspca_dev, 0x99, 0x5b);
-               break;
        case SENSOR_SP80708:
                reg_w1(gspca_dev, 0x9a, 0x05);
                reg_w1(gspca_dev, 0x99, 0x59);
@@ -2328,7 +2319,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
        {USB_DEVICE(0x0c45, 0x607c), BSI(SN9C102P, HV7131R, 0x11)},
 /*     {USB_DEVICE(0x0c45, 0x607e), BSI(SN9C102P, OV7630, 0x??)}, */
        {USB_DEVICE(0x0c45, 0x60c0), BSI(SN9C105, MI0360, 0x5d)},
-/*     {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6801, 0x??)}, */
+/*     {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6802, 0x??)}, */
 /*     {USB_DEVICE(0x0c45, 0x60cc), BSI(SN9C105, HV7131GP, 0x??)}, */
        {USB_DEVICE(0x0c45, 0x60ec), BSI(SN9C105, MO4000, 0x21)},
 /*     {USB_DEVICE(0x0c45, 0x60ef), BSI(SN9C105, ICM105C, 0x??)}, */