sfc: QT202x: Reset before reading PHY id
authorSteve Hodgson <shodgson@solarflare.com>
Sat, 28 Nov 2009 05:34:29 +0000 (05:34 +0000)
committerDavid S. Miller <davem@davemloft.net>
Sun, 29 Nov 2009 07:58:50 +0000 (23:58 -0800)
Reading standard registers on the QT2025C before its firmware has
booted may cause the boot process to fail.  Therefore, follow the
recommended reset sequence before reading its id registers.  Either
order works for the QT2022C2, so don't differentiate.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/sfc/qt202x_phy.c

index 1b174c3e6c126f7e96f6cab4541d28004cf20d8f..3d7370e39787e5fdac32efb38801c32d3f353fb9 100644 (file)
@@ -138,33 +138,27 @@ static int qt202x_reset_phy(struct efx_nic *efx)
 static int qt202x_phy_init(struct efx_nic *efx)
 {
        struct qt202x_phy_data *phy_data;
-       u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
+       u32 devid;
        int rc;
 
+       rc = qt202x_reset_phy(efx);
+       if (rc) {
+               EFX_ERR(efx, "PHY init failed\n");
+               return rc;
+       }
+
        phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
        if (!phy_data)
                return -ENOMEM;
        efx->phy_data = phy_data;
 
+       devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
        EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
                 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
                 efx_mdio_id_rev(devid));
 
        phy_data->phy_mode = efx->phy_mode;
-
-       rc = qt202x_reset_phy(efx);
-
-       EFX_INFO(efx, "PHY init %s.\n",
-                rc ? "failed" : "successful");
-       if (rc < 0)
-               goto fail;
-
        return 0;
-
- fail:
-       kfree(efx->phy_data);
-       efx->phy_data = NULL;
-       return rc;
 }
 
 static int qt202x_link_ok(struct efx_nic *efx)