omap3: zoom: split board file for software reuse
authorvikram pandita <vikram.pandita@ti.com>
Sun, 22 Nov 2009 18:11:30 +0000 (10:11 -0800)
committerTony Lindgren <tony@atomide.com>
Sun, 22 Nov 2009 18:24:33 +0000 (10:24 -0800)
Split zoom2 board file into a base board file and a board-zoom-peripherals.c
file. That way the same peripherals file can be reused for zoom3 and sdp3630
in addition to zoom2.

Also remove unused struct omap_board_config_kernel entry.

NOTE: Keep the twl4030_madc_platform_data and twl4030_platform_data
entries in board-zoom2.c to avoid merge conflicts with the pending
patches in MFD tree. These entries will be removed later as a fix.

Following list shows the commonality across the three platforms and hence the
case for software reuse:

Peripheral    zoom2    zoom3  sdp3630
---------------------------------------
Ethernet        smsc    smsc    smc
NOR             n/a     n/a     B
Onenand         n/a     n/a     B
HDMI            A       A       B (present on different i2c)
NAND            A       A       A (same nand)
SDRAM           A       A       A (same sdram)
Keypad          A       A       A (same twl)
Camera          A       A       A (same sensor can be mounted)
LCD Display     A       A       A (same wvga display)
OPPs            A       A       A (same chip feature)
Audio           A       A       A (same audio via twl5030)

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/Makefile
arch/arm/mach-omap2/board-zoom-peripherals.c [new file with mode: 0644]
arch/arm/mach-omap2/board-zoom2.c

index b77fe2463692746ad3d047f071db4dd946874183..8ac121edfa4adc849a4b3c4eb014c4e643f54f42 100644 (file)
@@ -75,6 +75,7 @@ obj-$(CONFIG_MACH_NOKIA_RX51)         += board-rx51.o \
                                           board-rx51-peripherals.o \
                                           mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)          += board-zoom2.o \
+                                          board-zoom-peripherals.o \
                                           mmc-twl4030.o \
                                           board-zoom-debugboard.o
 
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
new file mode 100644 (file)
index 0000000..75cbbe7
--- /dev/null
@@ -0,0 +1,268 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * Modified from mach-omap2/board-zoom2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/common.h>
+#include <plat/usb.h>
+
+#include "mmc-twl4030.h"
+
+/* Zoom2 has Qwerty keyboard*/
+static int board_keymap[] = {
+       KEY(0, 0, KEY_E),
+       KEY(0, 1, KEY_R),
+       KEY(0, 2, KEY_T),
+       KEY(0, 3, KEY_HOME),
+       KEY(0, 6, KEY_I),
+       KEY(0, 7, KEY_LEFTSHIFT),
+       KEY(1, 0, KEY_D),
+       KEY(1, 1, KEY_F),
+       KEY(1, 2, KEY_G),
+       KEY(1, 3, KEY_SEND),
+       KEY(1, 6, KEY_K),
+       KEY(1, 7, KEY_ENTER),
+       KEY(2, 0, KEY_X),
+       KEY(2, 1, KEY_C),
+       KEY(2, 2, KEY_V),
+       KEY(2, 3, KEY_END),
+       KEY(2, 6, KEY_DOT),
+       KEY(2, 7, KEY_CAPSLOCK),
+       KEY(3, 0, KEY_Z),
+       KEY(3, 1, KEY_KPPLUS),
+       KEY(3, 2, KEY_B),
+       KEY(3, 3, KEY_F1),
+       KEY(3, 6, KEY_O),
+       KEY(3, 7, KEY_SPACE),
+       KEY(4, 0, KEY_W),
+       KEY(4, 1, KEY_Y),
+       KEY(4, 2, KEY_U),
+       KEY(4, 3, KEY_F2),
+       KEY(4, 4, KEY_VOLUMEUP),
+       KEY(4, 6, KEY_L),
+       KEY(4, 7, KEY_LEFT),
+       KEY(5, 0, KEY_S),
+       KEY(5, 1, KEY_H),
+       KEY(5, 2, KEY_J),
+       KEY(5, 3, KEY_F3),
+       KEY(5, 5, KEY_VOLUMEDOWN),
+       KEY(5, 6, KEY_M),
+       KEY(5, 7, KEY_ENTER),
+       KEY(6, 0, KEY_Q),
+       KEY(6, 1, KEY_A),
+       KEY(6, 2, KEY_N),
+       KEY(6, 3, KEY_BACKSPACE),
+       KEY(6, 6, KEY_P),
+       KEY(6, 7, KEY_SELECT),
+       KEY(7, 0, KEY_PROG1),   /*MACRO 1 <User defined> */
+       KEY(7, 1, KEY_PROG2),   /*MACRO 2 <User defined> */
+       KEY(7, 2, KEY_PROG3),   /*MACRO 3 <User defined> */
+       KEY(7, 3, KEY_PROG4),   /*MACRO 4 <User defined> */
+       KEY(7, 5, KEY_RIGHT),
+       KEY(7, 6, KEY_UP),
+       KEY(7, 7, KEY_DOWN)
+};
+
+static struct matrix_keymap_data board_map_data = {
+       .keymap                 = board_keymap,
+       .keymap_size            = ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+       .keymap_data    = &board_map_data,
+       .rows           = 8,
+       .cols           = 8,
+       .rep            = 1,
+};
+
+static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+       .supply         = "vmmc",
+};
+
+static struct regulator_consumer_supply zoom2_vsim_supply = {
+       .supply         = "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+       .supply         = "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom2_vmmc1 = {
+       .constraints = {
+               .min_uV                 = 1850000,
+               .max_uV                 = 3150000,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
+                                       | REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies      = &zoom2_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom2_vmmc2 = {
+       .constraints = {
+               .min_uV                 = 1850000,
+               .max_uV                 = 1850000,
+               .apply_uV               = true,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies      = &zoom2_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom2_vsim = {
+       .constraints = {
+               .min_uV                 = 1800000,
+               .max_uV                 = 3000000,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
+                                       | REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies  = 1,
+       .consumer_supplies      = &zoom2_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+       {
+               .mmc            = 1,
+               .wires          = 4,
+               .gpio_wp        = -EINVAL,
+       },
+       {
+               .mmc            = 2,
+               .wires          = 4,
+               .gpio_wp        = -EINVAL,
+       },
+       {}      /* Terminator */
+};
+
+static int zoom2_twl_gpio_setup(struct device *dev,
+               unsigned gpio, unsigned ngpio)
+{
+       /* gpio + 0 is "mmc0_cd" (input/IRQ),
+        * gpio + 1 is "mmc1_cd" (input/IRQ)
+        */
+       mmc[0].gpio_cd = gpio + 0;
+       mmc[1].gpio_cd = gpio + 1;
+       twl4030_mmc_init(mmc);
+
+       /* link regulators to MMC adapters ... we "know" the
+        * regulators will be set up only *after* we return.
+       */
+       zoom2_vmmc1_supply.dev = mmc[0].dev;
+       zoom2_vsim_supply.dev = mmc[0].dev;
+       zoom2_vmmc2_supply.dev = mmc[1].dev;
+
+       return 0;
+}
+
+
+static int zoom2_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
+};
+
+static struct twl4030_bci_platform_data zoom2_bci_data = {
+       .battery_tmp_tbl        = zoom2_batt_table,
+       .tblsize                = ARRAY_SIZE(zoom2_batt_table),
+};
+
+static struct twl4030_usb_data zoom2_usb_data = {
+       .usb_mode       = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+       .gpio_base      = OMAP_MAX_GPIO_LINES,
+       .irq_base       = TWL4030_GPIO_IRQ_BASE,
+       .irq_end        = TWL4030_GPIO_IRQ_END,
+       .setup          = zoom2_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom2_madc_data = {
+       .irq_line       = 1,
+};
+
+static struct twl4030_codec_audio_data zoom2_audio_data = {
+       .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data zoom2_codec_data = {
+       .audio_mclk = 26000000,
+       .audio = &zoom2_audio_data,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+       .irq_base       = TWL4030_IRQ_BASE,
+       .irq_end        = TWL4030_IRQ_END,
+
+       /* platform_data for children goes here */
+       .bci            = &zoom2_bci_data,
+       .madc           = &zoom2_madc_data,
+       .usb            = &zoom2_usb_data,
+       .gpio           = &zoom2_gpio_data,
+       .keypad         = &zoom2_kp_twl4030_data,
+       .codec          = &zoom2_codec_data,
+       .vmmc1          = &zoom2_vmmc1,
+       .vmmc2          = &zoom2_vmmc2,
+       .vsim           = &zoom2_vsim,
+
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+       {
+               I2C_BOARD_INFO("twl4030", 0x48),
+               .flags          = I2C_CLIENT_WAKE,
+               .irq            = INT_34XX_SYS_NIRQ,
+               .platform_data  = &zoom2_twldata,
+       },
+};
+
+static int __init omap_i2c_init(void)
+{
+       omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+                       ARRAY_SIZE(zoom2_i2c_boardinfo));
+       omap_register_i2c_bus(2, 400, NULL, 0);
+       omap_register_i2c_bus(3, 400, NULL, 0);
+       return 0;
+}
+
+void __init zoom_peripherals_init(void)
+{
+       omap_i2c_init();
+       omap_serial_init();
+       usb_musb_init();
+}
index 67abebc46feb21ea8130f5a52888ca1b27568406..31d485b6859fdc0d61f329347d98466a35d5be50 100644 (file)
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/common.h>
-#include <plat/usb.h>
+#include <plat/board.h>
 
-#include "mmc-twl4030.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-/* Zoom2 has Qwerty keyboard*/
-static int board_keymap[] = {
-       KEY(0, 0, KEY_E),
-       KEY(0, 1, KEY_R),
-       KEY(0, 2, KEY_T),
-       KEY(0, 3, KEY_HOME),
-       KEY(0, 6, KEY_I),
-       KEY(0, 7, KEY_LEFTSHIFT),
-       KEY(1, 0, KEY_D),
-       KEY(1, 1, KEY_F),
-       KEY(1, 2, KEY_G),
-       KEY(1, 3, KEY_SEND),
-       KEY(1, 6, KEY_K),
-       KEY(1, 7, KEY_ENTER),
-       KEY(2, 0, KEY_X),
-       KEY(2, 1, KEY_C),
-       KEY(2, 2, KEY_V),
-       KEY(2, 3, KEY_END),
-       KEY(2, 6, KEY_DOT),
-       KEY(2, 7, KEY_CAPSLOCK),
-       KEY(3, 0, KEY_Z),
-       KEY(3, 1, KEY_KPPLUS),
-       KEY(3, 2, KEY_B),
-       KEY(3, 3, KEY_F1),
-       KEY(3, 6, KEY_O),
-       KEY(3, 7, KEY_SPACE),
-       KEY(4, 0, KEY_W),
-       KEY(4, 1, KEY_Y),
-       KEY(4, 2, KEY_U),
-       KEY(4, 3, KEY_F2),
-       KEY(4, 4, KEY_VOLUMEUP),
-       KEY(4, 6, KEY_L),
-       KEY(4, 7, KEY_LEFT),
-       KEY(5, 0, KEY_S),
-       KEY(5, 1, KEY_H),
-       KEY(5, 2, KEY_J),
-       KEY(5, 3, KEY_F3),
-       KEY(5, 5, KEY_VOLUMEDOWN),
-       KEY(5, 6, KEY_M),
-       KEY(5, 7, KEY_ENTER),
-       KEY(6, 0, KEY_Q),
-       KEY(6, 1, KEY_A),
-       KEY(6, 2, KEY_N),
-       KEY(6, 3, KEY_BACKSPACE),
-       KEY(6, 6, KEY_P),
-       KEY(6, 7, KEY_SELECT),
-       KEY(7, 0, KEY_PROG1),   /*MACRO 1 <User defined> */
-       KEY(7, 1, KEY_PROG2),   /*MACRO 2 <User defined> */
-       KEY(7, 2, KEY_PROG3),   /*MACRO 3 <User defined> */
-       KEY(7, 3, KEY_PROG4),   /*MACRO 4 <User defined> */
-       KEY(7, 5, KEY_RIGHT),
-       KEY(7, 6, KEY_UP),
-       KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-       .keymap                 = board_keymap,
-       .keymap_size            = ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
-       .keymap_data    = &board_map_data,
-       .rows           = 8,
-       .cols           = 8,
-       .rep            = 1,
-};
-
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-};
-
-static struct regulator_consumer_supply zoom2_vmmc1_supply = {
-       .supply         = "vmmc",
-};
-
-static struct regulator_consumer_supply zoom2_vsim_supply = {
-       .supply         = "vmmc_aux",
-};
-
-static struct regulator_consumer_supply zoom2_vmmc2_supply = {
-       .supply         = "vmmc",
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom2_vmmc1 = {
-       .constraints = {
-               .min_uV                 = 1850000,
-               .max_uV                 = 3150000,
-               .valid_modes_mask       = REGULATOR_MODE_NORMAL
-                                       | REGULATOR_MODE_STANDBY,
-               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
-                                       | REGULATOR_CHANGE_MODE
-                                       | REGULATOR_CHANGE_STATUS,
-       },
-       .num_consumer_supplies  = 1,
-       .consumer_supplies      = &zoom2_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom2_vmmc2 = {
-       .constraints = {
-               .min_uV                 = 1850000,
-               .max_uV                 = 1850000,
-               .apply_uV               = true,
-               .valid_modes_mask       = REGULATOR_MODE_NORMAL
-                                       | REGULATOR_MODE_STANDBY,
-               .valid_ops_mask         = REGULATOR_CHANGE_MODE
-                                       | REGULATOR_CHANGE_STATUS,
-       },
-       .num_consumer_supplies  = 1,
-       .consumer_supplies      = &zoom2_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom2_vsim = {
-       .constraints = {
-               .min_uV                 = 1800000,
-               .max_uV                 = 3000000,
-               .valid_modes_mask       = REGULATOR_MODE_NORMAL
-                                       | REGULATOR_MODE_STANDBY,
-               .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
-                                       | REGULATOR_CHANGE_MODE
-                                       | REGULATOR_CHANGE_STATUS,
-       },
-       .num_consumer_supplies  = 1,
-       .consumer_supplies      = &zoom2_vsim_supply,
-};
-
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-       {
-               .mmc            = 1,
-               .wires          = 4,
-               .gpio_wp        = -EINVAL,
-       },
-       {
-               .mmc            = 2,
-               .wires          = 4,
-               .gpio_wp        = -EINVAL,
-       },
-       {}      /* Terminator */
-};
-
-static int zoom2_twl_gpio_setup(struct device *dev,
-               unsigned gpio, unsigned ngpio)
-{
-       /* gpio + 0 is "mmc0_cd" (input/IRQ),
-        * gpio + 1 is "mmc1_cd" (input/IRQ)
-        */
-       mmc[0].gpio_cd = gpio + 0;
-       mmc[1].gpio_cd = gpio + 1;
-       twl4030_mmc_init(mmc);
-
-       /* link regulators to MMC adapters ... we "know" the
-        * regulators will be set up only *after* we return.
-       */
-       zoom2_vmmc1_supply.dev = mmc[0].dev;
-       zoom2_vsim_supply.dev = mmc[0].dev;
-       zoom2_vmmc2_supply.dev = mmc[1].dev;
-
-       return 0;
-}
-
-
-static int zoom2_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data zoom2_bci_data = {
-       .battery_tmp_tbl        = zoom2_batt_table,
-       .tblsize                = ARRAY_SIZE(zoom2_batt_table),
-};
-
-static struct twl4030_usb_data zoom2_usb_data = {
-       .usb_mode       = T2_USB_MODE_ULPI,
-};
-
 static void __init omap_zoom2_init_irq(void)
 {
-       omap_board_config = zoom2_config;
-       omap_board_config_size = ARRAY_SIZE(zoom2_config);
        omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
                                 mt46h32m32lf6_sdrc_params);
        omap_init_irq();
        omap_gpio_init();
 }
 
-static struct twl4030_gpio_platform_data zoom2_gpio_data = {
-       .gpio_base      = OMAP_MAX_GPIO_LINES,
-       .irq_base       = TWL4030_GPIO_IRQ_BASE,
-       .irq_end        = TWL4030_GPIO_IRQ_END,
-       .setup          = zoom2_twl_gpio_setup,
-};
+/* REVISIT: These audio entries can be removed once MFD code is merged */
+#if 0
 
 static struct twl4030_madc_platform_data zoom2_madc_data = {
        .irq_line       = 1,
 };
 
-static struct twl4030_codec_audio_data zoom2_audio_data = {
-       .audio_mclk = 26000000,
-};
-
-static struct twl4030_codec_data zoom2_codec_data = {
-       .audio_mclk = 26000000,
-       .audio = &zoom2_audio_data,
-};
-
 static struct twl4030_platform_data zoom2_twldata = {
        .irq_base       = TWL4030_IRQ_BASE,
        .irq_end        = TWL4030_IRQ_END,
@@ -249,39 +48,21 @@ static struct twl4030_platform_data zoom2_twldata = {
        .usb            = &zoom2_usb_data,
        .gpio           = &zoom2_gpio_data,
        .keypad         = &zoom2_kp_twl4030_data,
-       .codec          = &zoom2_codec_data,
        .vmmc1          = &zoom2_vmmc1,
        .vmmc2          = &zoom2_vmmc2,
        .vsim           = &zoom2_vsim,
 
 };
 
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
-       {
-               I2C_BOARD_INFO("twl4030", 0x48),
-               .flags          = I2C_CLIENT_WAKE,
-               .irq            = INT_34XX_SYS_NIRQ,
-               .platform_data  = &zoom2_twldata,
-       },
-};
-
-static int __init omap_i2c_init(void)
-{
-       omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
-                       ARRAY_SIZE(zoom2_i2c_boardinfo));
-       omap_register_i2c_bus(2, 400, NULL, 0);
-       omap_register_i2c_bus(3, 400, NULL, 0);
-       return 0;
-}
+#endif
 
 extern int __init omap_zoom2_debugboard_init(void);
+extern void __init zoom_peripherals_init(void);
 
 static void __init omap_zoom2_init(void)
 {
-       omap_i2c_init();
-       omap_serial_init();
+       zoom_peripherals_init();
        omap_zoom2_debugboard_init();
-       usb_musb_init();
 }
 
 static void __init omap_zoom2_map_io(void)