net/mlx5e: Fill advertised and supported port data from Hardware info
authorEran Ben Elisha <eranbe@mellanox.com>
Sun, 16 Apr 2017 07:03:38 +0000 (10:03 +0300)
committerSaeed Mahameed <saeedm@mellanox.com>
Thu, 8 Jun 2017 11:12:00 +0000 (14:12 +0300)
Translate hardware port connector type data into link mode supported and
advertised info instead of caching it in driver.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

index f03c2d088d0cee51b233d69fe37503ffd6a05bc5..b4514f2474024dc1f73a13ecd82f6d6c64378ca5 100644 (file)
@@ -723,24 +723,81 @@ static void ptys2ethtool_adver_link(unsigned long *advertising_modes,
                          __ETHTOOL_LINK_MODE_MASK_NBITS);
 }
 
-static void ptys2ethtool_supported_port(struct ethtool_link_ksettings *link_ksettings,
-                                       u32 eth_proto_cap)
+static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings *link_ksettings,
+                                                  u32 eth_proto_cap,
+                                                  u8 connector_type)
 {
-       if (eth_proto_cap & (MLX5E_PROT_MASK(MLX5E_10GBASE_CR)
-                          | MLX5E_PROT_MASK(MLX5E_10GBASE_SR)
-                          | MLX5E_PROT_MASK(MLX5E_40GBASE_CR4)
-                          | MLX5E_PROT_MASK(MLX5E_40GBASE_SR4)
-                          | MLX5E_PROT_MASK(MLX5E_100GBASE_SR4)
-                          | MLX5E_PROT_MASK(MLX5E_1000BASE_CX_SGMII))) {
-               ethtool_link_ksettings_add_link_mode(link_ksettings, supported, FIBRE);
+       if (!connector_type || connector_type >= MLX5E_CONNECTOR_TYPE_NUMBER) {
+               if (eth_proto_cap & (MLX5E_PROT_MASK(MLX5E_10GBASE_CR)
+                                  | MLX5E_PROT_MASK(MLX5E_10GBASE_SR)
+                                  | MLX5E_PROT_MASK(MLX5E_40GBASE_CR4)
+                                  | MLX5E_PROT_MASK(MLX5E_40GBASE_SR4)
+                                  | MLX5E_PROT_MASK(MLX5E_100GBASE_SR4)
+                                  | MLX5E_PROT_MASK(MLX5E_1000BASE_CX_SGMII))) {
+                       ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                            supported,
+                                                            FIBRE);
+                       ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                            advertising,
+                                                            FIBRE);
+               }
+
+               if (eth_proto_cap & (MLX5E_PROT_MASK(MLX5E_100GBASE_KR4)
+                                  | MLX5E_PROT_MASK(MLX5E_40GBASE_KR4)
+                                  | MLX5E_PROT_MASK(MLX5E_10GBASE_KR)
+                                  | MLX5E_PROT_MASK(MLX5E_10GBASE_KX4)
+                                  | MLX5E_PROT_MASK(MLX5E_1000BASE_KX))) {
+                       ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                            supported,
+                                                            Backplane);
+                       ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                            advertising,
+                                                            Backplane);
+               }
+               return;
        }
 
-       if (eth_proto_cap & (MLX5E_PROT_MASK(MLX5E_100GBASE_KR4)
-                          | MLX5E_PROT_MASK(MLX5E_40GBASE_KR4)
-                          | MLX5E_PROT_MASK(MLX5E_10GBASE_KR)
-                          | MLX5E_PROT_MASK(MLX5E_10GBASE_KX4)
-                          | MLX5E_PROT_MASK(MLX5E_1000BASE_KX))) {
-               ethtool_link_ksettings_add_link_mode(link_ksettings, supported, Backplane);
+       switch (connector_type) {
+       case MLX5E_PORT_TP:
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    supported, TP);
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    advertising, TP);
+               break;
+       case MLX5E_PORT_AUI:
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    supported, AUI);
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    advertising, AUI);
+               break;
+       case MLX5E_PORT_BNC:
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    supported, BNC);
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    advertising, BNC);
+               break;
+       case MLX5E_PORT_MII:
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    supported, MII);
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    advertising, MII);
+               break;
+       case MLX5E_PORT_FIBRE:
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    supported, FIBRE);
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    advertising, FIBRE);
+               break;
+       case MLX5E_PORT_DA:
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    supported, Backplane);
+               ethtool_link_ksettings_add_link_mode(link_ksettings,
+                                                    advertising, Backplane);
+               break;
+       case MLX5E_PORT_NONE:
+       case MLX5E_PORT_OTHER:
+       default:
+               break;
        }
 }
 
@@ -791,7 +848,6 @@ static void get_supported(u32 eth_proto_cap,
 {
        unsigned long *supported = link_ksettings->link_modes.supported;
 
-       ptys2ethtool_supported_port(link_ksettings, eth_proto_cap);
        ptys2ethtool_supported_link(supported, eth_proto_cap);
        ethtool_link_ksettings_add_link_mode(link_ksettings, supported, Pause);
 }
@@ -902,6 +958,8 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 
        link_ksettings->base.port = get_connector_port(eth_proto_oper,
                                                       connector_type);
+       ptys2ethtool_supported_advertised_port(link_ksettings, eth_proto_admin,
+                                              connector_type);
        get_lp_advertising(eth_proto_lp, link_ksettings);
 
        if (an_status == MLX5_AN_COMPLETE)