ARM: dts: sun9i: Enable i2c3 on A80 Optimus board

i2c3 is exposed on the GPIO extension header. Enable it so we can use it.

Also enable internal pull-ups on the pins, as they don't seem to have
external pull-up resistors.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 5d9bc80afef2784fec172f5a4c3ff39acf0cd08c..955436aa91d4072a9558aabfbe129a9fd97acd87 100644 (file)
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -59,10 +59,23 @@
        };
 
        soc {
+               pio: pinctrl@06000800 {
+                       i2c3_pins_a: i2c3@0 {
+                               /* Enable internal pull-up */
+                               allwinner,pull = <1>;
+                       };
+               };
+
                uart0: serial@07000000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&uart0_pins_a>;
                        status = "okay";
                };
+
+               i2c3: i2c@07003400 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c3_pins_a>;
+                       status = "okay";
+               };
        };
 };