When getting translated from a downstream device tree that used slightly
different DT bindings, these regulators got labeled with the
"on-in-suspend" state, when they were actually supposed to be turned off
for S3 suspend. This was harmless, but not intentional, AFAICT.
Let's turn them off to get the optimal power state.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
};
};
};
regulator-boot-on;
regulator-name = "vcc18_lcd";
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
};
};
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
};
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
};
};
};