V4L/DVB (3413): Kill nxt2002 in favor of the nxt200x module
authorMichael Krufky <mkrufky@m1k.net>
Mon, 23 Jan 2006 11:52:39 +0000 (09:52 -0200)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Mon, 23 Jan 2006 19:06:26 +0000 (17:06 -0200)
- Kill nxt2002 module in favor of nxt200x.
- Repair broken nxt2002 support in the nxt200x module.
- Make the flexcop driver use nxt200x instead of the nxt2002 module for the
  Air2PC 2nd generation PCI card.
- Remove the nxt2002 module from cvs and kernel build.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/b2c2/Kconfig
drivers/media/dvb/b2c2/flexcop-fe-tuner.c
drivers/media/dvb/frontends/Kconfig
drivers/media/dvb/frontends/Makefile
drivers/media/dvb/frontends/dvb-pll.c
drivers/media/dvb/frontends/nxt2002.c [deleted file]
drivers/media/dvb/frontends/nxt2002.h [deleted file]
drivers/media/dvb/frontends/nxt200x.c

index 2583a865a58e4c7aea3d09b01f832e30689d29ad..2963605c0ecc236c3c95ea7f22595b4c095702a1 100644 (file)
@@ -4,7 +4,7 @@ config DVB_B2C2_FLEXCOP
        select DVB_STV0299
        select DVB_MT352
        select DVB_MT312
-       select DVB_NXT2002
+       select DVB_NXT200X
        select DVB_STV0297
        select DVB_BCM3510
        select DVB_LGDT330X
index 0b940e152b7973ceb6db8f504fd7e8f36782b013..dbe6f6b7ee263e0d6a17ddcbc79e3edf88fe66c6 100644 (file)
@@ -9,7 +9,7 @@
 
 #include "stv0299.h"
 #include "mt352.h"
-#include "nxt2002.h"
+#include "nxt200x.h"
 #include "bcm3510.h"
 #include "stv0297.h"
 #include "mt312.h"
@@ -343,9 +343,10 @@ static struct lgdt330x_config air2pc_atsc_hd5000_config = {
        .clock_polarity_flip = 1,
 };
 
-static struct nxt2002_config samsung_tbmv_config = {
+static struct nxt200x_config samsung_tbmv_config = {
        .demod_address    = 0x0a,
-       .request_firmware = flexcop_fe_request_firmware,
+       .pll_address      = 0xc2,
+       .pll_desc         = &dvb_pll_tbmv30111in,
 };
 
 static struct bcm3510_config air2pc_atsc_first_gen_config = {
@@ -505,7 +506,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
                info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
        } else
        /* try the air atsc 2nd generation (nxt2002) */
-       if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+       if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
                fc->dev_type          = FC_AIR_ATSC2;
                info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
        } else
index db3a8b40031eaa379edaaa066f5d0423860a5b91..f09e3da669feeaa3468dd4287951f8351df48639 100644 (file)
@@ -166,18 +166,6 @@ config DVB_STV0297
 comment "ATSC (North American/Korean Terresterial DTV) frontends"
        depends on DVB_CORE
 
-config DVB_NXT2002
-       tristate "Nxt2002 based"
-       depends on DVB_CORE
-       select FW_LOADER
-       help
-         An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-
-         This driver needs external firmware. Please use the command
-         "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
-         download/extract it, and then copy it to /usr/lib/hotplug/firmware
-         or /lib/firmware (depending on configuration of firmware hotplug).
-
 config DVB_NXT200X
        tristate "Nextwave NXT2002/NXT2004 based"
        depends on DVB_CORE
index 615ec830e1c911d8c1adb28b93f73b51259e4bcd..8f301468568dac6b9f3da80c6814fb332118aec9 100644 (file)
@@ -25,7 +25,6 @@ obj-$(CONFIG_DVB_CX22702) += cx22702.o
 obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
-obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
 obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
 obj-$(CONFIG_DVB_OR51211) += or51211.o
 obj-$(CONFIG_DVB_OR51132) += or51132.o
index 1b9934ea5b06c082bf7050eb771193c177895e68..9c9c12af5799d961d70458d043387d71cc9d9e7a 100644 (file)
@@ -326,7 +326,7 @@ struct dvb_pll_desc dvb_pll_tuv1236d = {
 };
 EXPORT_SYMBOL(dvb_pll_tuv1236d);
 
-/* Samsung TBMV30111IN
+/* Samsung TBMV30111IN / TBMV30712IN1
  * used in Air2PC ATSC - 2nd generation (nxt2002)
  */
 struct dvb_pll_desc dvb_pll_tbmv30111in = {
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
deleted file mode 100644 (file)
index 4f263e6..0000000
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
-    Support for B2C2/BBTI Technisat Air2PC - ATSC
-
-    Copyright (C) 2004 Taylor Jacob <rtjacob@earthlink.net>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
-#define CRC_CCIT_MASK 0x1021
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "nxt2002.h"
-
-struct nxt2002_state {
-
-       struct i2c_adapter* i2c;
-       struct dvb_frontend_ops ops;
-       const struct nxt2002_config* config;
-       struct dvb_frontend frontend;
-
-       /* demodulator private data */
-       u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-       do { \
-               if (debug) printk(KERN_DEBUG "nxt2002: " args); \
-       } while (0)
-
-static int i2c_writebytes (struct nxt2002_state* state, u8 reg, u8 *buf, u8 len)
-{
-       /* probbably a much better way or doing this */
-       u8 buf2 [256],x;
-       int err;
-       struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
-
-       buf2[0] = reg;
-       for (x = 0 ; x < len ; x++)
-               buf2[x+1] = buf[x];
-
-       if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-               printk ("%s: i2c write error (addr %02x, err == %i)\n",
-                       __FUNCTION__, state->config->demod_address, err);
-               return -EREMOTEIO;
-       }
-
-       return 0;
-}
-
-static u8 i2c_readbytes (struct nxt2002_state* state, u8 reg, u8* buf, u8 len)
-{
-       u8 reg2 [] = { reg };
-
-       struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
-                       { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
-       int err;
-
-       if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
-               printk ("%s: i2c read error (addr %02x, err == %i)\n",
-                       __FUNCTION__, state->config->demod_address, err);
-               return -EREMOTEIO;
-       }
-
-       return 0;
-}
-
-static u16 nxt2002_crc(u16 crc, u8 c)
-{
-
-       u8 i;
-       u16 input = (u16) c & 0xFF;
-
-       input<<=8;
-       for(i=0 ;i<8 ;i++) {
-               if((crc ^ input) & 0x8000)
-                       crc=(crc<<1)^CRC_CCIT_MASK;
-               else
-                       crc<<=1;
-       input<<=1;
-       }
-       return crc;
-}
-
-static int nxt2002_writereg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
-       u8 buf;
-       dprintk("%s\n", __FUNCTION__);
-
-       /* set multi register length */
-       i2c_writebytes(state,0x34,&len,1);
-
-       /* set mutli register register */
-       i2c_writebytes(state,0x35,&reg,1);
-
-       /* send the actual data */
-       i2c_writebytes(state,0x36,data,len);
-
-       /* toggle the multireg write bit*/
-       buf = 0x02;
-       i2c_writebytes(state,0x21,&buf,1);
-
-       i2c_readbytes(state,0x21,&buf,1);
-
-       if ((buf & 0x02) == 0)
-               return 0;
-
-       dprintk("Error writing multireg register %02X\n",reg);
-
-       return 0;
-}
-
-static int nxt2002_readreg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
-       u8 len2;
-       dprintk("%s\n", __FUNCTION__);
-
-       /* set multi register length */
-       len2 = len & 0x80;
-       i2c_writebytes(state,0x34,&len2,1);
-
-       /* set mutli register register */
-       i2c_writebytes(state,0x35,&reg,1);
-
-       /* send the actual data */
-       i2c_readbytes(state,reg,data,len);
-
-       return 0;
-}
-
-static void nxt2002_microcontroller_stop (struct nxt2002_state* state)
-{
-       u8 buf[2],counter = 0;
-       dprintk("%s\n", __FUNCTION__);
-
-       buf[0] = 0x80;
-       i2c_writebytes(state,0x22,buf,1);
-
-       while (counter < 20) {
-               i2c_readbytes(state,0x31,buf,1);
-               if (buf[0] & 0x40)
-                       return;
-               msleep(10);
-               counter++;
-       }
-
-       dprintk("Timeout waiting for micro to stop.. This is ok after firmware upload\n");
-       return;
-}
-
-static void nxt2002_microcontroller_start (struct nxt2002_state* state)
-{
-       u8 buf;
-       dprintk("%s\n", __FUNCTION__);
-
-       buf = 0x00;
-       i2c_writebytes(state,0x22,&buf,1);
-}
-
-static int nxt2002_writetuner (struct nxt2002_state* state, u8* data)
-{
-       u8 buf,count = 0;
-
-       dprintk("Tuner Bytes: %02X %02X %02X %02X\n",data[0],data[1],data[2],data[3]);
-
-       dprintk("%s\n", __FUNCTION__);
-       /* stop the micro first */
-       nxt2002_microcontroller_stop(state);
-
-       /* set the i2c transfer speed to the tuner */
-       buf = 0x03;
-       i2c_writebytes(state,0x20,&buf,1);
-
-       /* setup to transfer 4 bytes via i2c */
-       buf = 0x04;
-       i2c_writebytes(state,0x34,&buf,1);
-
-       /* write actual tuner bytes */
-       i2c_writebytes(state,0x36,data,4);
-
-       /* set tuner i2c address */
-       buf = 0xC2;
-       i2c_writebytes(state,0x35,&buf,1);
-
-       /* write UC Opmode to begin transfer */
-       buf = 0x80;
-       i2c_writebytes(state,0x21,&buf,1);
-
-       while (count < 20) {
-               i2c_readbytes(state,0x21,&buf,1);
-               if ((buf & 0x80)== 0x00)
-                       return 0;
-               msleep(100);
-               count++;
-       }
-
-       printk("nxt2002: timeout error writing tuner\n");
-       return 0;
-}
-
-static void nxt2002_agc_reset(struct nxt2002_state* state)
-{
-       u8 buf;
-       dprintk("%s\n", __FUNCTION__);
-
-       buf = 0x08;
-       i2c_writebytes(state,0x08,&buf,1);
-
-       buf = 0x00;
-       i2c_writebytes(state,0x08,&buf,1);
-
-       return;
-}
-
-static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-
-       struct nxt2002_state* state = fe->demodulator_priv;
-       u8 buf[256],written = 0,chunkpos = 0;
-       u16 rambase,position,crc = 0;
-
-       dprintk("%s\n", __FUNCTION__);
-       dprintk("Firmware is %zu bytes\n",fw->size);
-
-       /* Get the RAM base for this nxt2002 */
-       i2c_readbytes(state,0x10,buf,1);
-
-       if (buf[0] & 0x10)
-               rambase = 0x1000;
-       else
-               rambase = 0x0000;
-
-       dprintk("rambase on this nxt2002 is %04X\n",rambase);
-
-       /* Hold the micro in reset while loading firmware */
-       buf[0] = 0x80;
-       i2c_writebytes(state,0x2B,buf,1);
-
-       for (position = 0; position < fw->size ; position++) {
-               if (written == 0) {
-                       crc = 0;
-                       chunkpos = 0x28;
-                       buf[0] = ((rambase + position) >> 8);
-                       buf[1] = (rambase + position) & 0xFF;
-                       buf[2] = 0x81;
-                       /* write starting address */
-                       i2c_writebytes(state,0x29,buf,3);
-               }
-               written++;
-               chunkpos++;
-
-               if ((written % 4) == 0)
-                       i2c_writebytes(state,chunkpos,&fw->data[position-3],4);
-
-               crc = nxt2002_crc(crc,fw->data[position]);
-
-               if ((written == 255) || (position+1 == fw->size)) {
-                       /* write remaining bytes of firmware */
-                       i2c_writebytes(state, chunkpos+4-(written %4),
-                               &fw->data[position-(written %4) + 1],
-                               written %4);
-                       buf[0] = crc << 8;
-                       buf[1] = crc & 0xFF;
-
-                       /* write crc */
-                       i2c_writebytes(state,0x2C,buf,2);
-
-                       /* do a read to stop things */
-                       i2c_readbytes(state,0x2A,buf,1);
-
-                       /* set transfer mode to complete */
-                       buf[0] = 0x80;
-                       i2c_writebytes(state,0x2B,buf,1);
-
-                       written = 0;
-               }
-       }
-
-       printk ("done.\n");
-       return 0;
-};
-
-static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
-                                            struct dvb_frontend_parameters *p)
-{
-       struct nxt2002_state* state = fe->demodulator_priv;
-       u32 freq = 0;
-       u16 tunerfreq = 0;
-       u8 buf[4];
-
-       freq = 44000 + ( p->frequency / 1000 );
-
-       dprintk("freq = %d      p->frequency = %d\n",freq,p->frequency);
-
-       tunerfreq = freq * 24/4000;
-
-       buf[0] = (tunerfreq >> 8) & 0x7F;
-       buf[1] = (tunerfreq & 0xFF);
-
-       if (p->frequency <= 214000000) {
-               buf[2] = 0x84 + (0x06 << 3);
-               buf[3] = (p->frequency <= 172000000) ? 0x01 : 0x02;
-       } else if (p->frequency <= 721000000) {
-               buf[2] = 0x84 + (0x07 << 3);
-               buf[3] = (p->frequency <= 467000000) ? 0x02 : 0x08;
-       } else if (p->frequency <= 841000000) {
-               buf[2] = 0x84 + (0x0E << 3);
-               buf[3] = 0x08;
-       } else {
-               buf[2] = 0x84 + (0x0F << 3);
-               buf[3] = 0x02;
-       }
-
-       /* write frequency information */
-       nxt2002_writetuner(state,buf);
-
-       /* reset the agc now that tuning has been completed */
-       nxt2002_agc_reset(state);
-
-       /* set target power level */
-       switch (p->u.vsb.modulation) {
-               case QAM_64:
-               case QAM_256:
-                               buf[0] = 0x74;
-                               break;
-               case VSB_8:
-                               buf[0] = 0x70;
-                               break;
-               default:
-                               return -EINVAL;
-                               break;
-       }
-       i2c_writebytes(state,0x42,buf,1);
-
-       /* configure sdm */
-       buf[0] = 0x87;
-       i2c_writebytes(state,0x57,buf,1);
-
-       /* write sdm1 input */
-       buf[0] = 0x10;
-       buf[1] = 0x00;
-       nxt2002_writereg_multibyte(state,0x58,buf,2);
-
-       /* write sdmx input */
-       switch (p->u.vsb.modulation) {
-               case QAM_64:
-                               buf[0] = 0x68;
-                               break;
-               case QAM_256:
-                               buf[0] = 0x64;
-                               break;
-               case VSB_8:
-                               buf[0] = 0x60;
-                               break;
-               default:
-                               return -EINVAL;
-                               break;
-       }
-       buf[1] = 0x00;
-       nxt2002_writereg_multibyte(state,0x5C,buf,2);
-
-       /* write adc power lpf fc */
-       buf[0] = 0x05;
-       i2c_writebytes(state,0x43,buf,1);
-
-       /* write adc power lpf fc */
-       buf[0] = 0x05;
-       i2c_writebytes(state,0x43,buf,1);
-
-       /* write accumulator2 input */
-       buf[0] = 0x80;
-       buf[1] = 0x00;
-       nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
-       /* write kg1 */
-       buf[0] = 0x00;
-       i2c_writebytes(state,0x4D,buf,1);
-
-       /* write sdm12 lpf fc */
-       buf[0] = 0x44;
-       i2c_writebytes(state,0x55,buf,1);
-
-       /* write agc control reg */
-       buf[0] = 0x04;
-       i2c_writebytes(state,0x41,buf,1);
-
-       /* write agc ucgp0 */
-       switch (p->u.vsb.modulation) {
-               case QAM_64:
-                               buf[0] = 0x02;
-                               break;
-               case QAM_256:
-                               buf[0] = 0x03;
-                               break;
-               case VSB_8:
-                               buf[0] = 0x00;
-                               break;
-               default:
-                               return -EINVAL;
-                               break;
-       }
-       i2c_writebytes(state,0x30,buf,1);
-
-       /* write agc control reg */
-       buf[0] = 0x00;
-       i2c_writebytes(state,0x41,buf,1);
-
-       /* write accumulator2 input */
-       buf[0] = 0x80;
-       buf[1] = 0x00;
-       nxt2002_writereg_multibyte(state,0x49,buf,2);
-       nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
-       /* write agc control reg */
-       buf[0] = 0x04;
-       i2c_writebytes(state,0x41,buf,1);
-
-       nxt2002_microcontroller_start(state);
-
-       /* adjacent channel detection should be done here, but I don't
-       have any stations with this need so I cannot test it */
-
-       return 0;
-}
-
-static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-       struct nxt2002_state* state = fe->demodulator_priv;
-       u8 lock;
-       i2c_readbytes(state,0x31,&lock,1);
-
-       *status = 0;
-       if (lock & 0x20) {
-               *status |= FE_HAS_SIGNAL;
-               *status |= FE_HAS_CARRIER;
-               *status |= FE_HAS_VITERBI;
-               *status |= FE_HAS_SYNC;
-               *status |= FE_HAS_LOCK;
-       }
-       return 0;
-}
-
-static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-       struct nxt2002_state* state = fe->demodulator_priv;
-       u8 b[3];
-
-       nxt2002_readreg_multibyte(state,0xE6,b,3);
-
-       *ber = ((b[0] << 8) + b[1]) * 8;
-
-       return 0;
-}
-
-static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-       struct nxt2002_state* state = fe->demodulator_priv;
-       u8 b[2];
-       u16 temp = 0;
-
-       /* setup to read cluster variance */
-       b[0] = 0x00;
-       i2c_writebytes(state,0xA1,b,1);
-
-       /* get multreg val */
-       nxt2002_readreg_multibyte(state,0xA6,b,2);
-
-       temp = (b[0] << 8) | b[1];
-       *strength = ((0x7FFF - temp) & 0x0FFF) * 16;
-
-       return 0;
-}
-
-static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-
-       struct nxt2002_state* state = fe->demodulator_priv;
-       u8 b[2];
-       u16 temp = 0, temp2;
-       u32 snrdb = 0;
-
-       /* setup to read cluster variance */
-       b[0] = 0x00;
-       i2c_writebytes(state,0xA1,b,1);
-
-       /* get multreg val from 0xA6 */
-       nxt2002_readreg_multibyte(state,0xA6,b,2);
-
-       temp = (b[0] << 8) | b[1];
-       temp2 = 0x7FFF - temp;
-
-       /* snr will be in db */
-       if (temp2 > 0x7F00)
-               snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
-       else if (temp2 > 0x7EC0)
-               snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
-       else if (temp2 > 0x7C00)
-               snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
-       else
-               snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
-
-       /* the value reported back from the frontend will be FFFF=32db 0000=0db */
-
-       *snr = snrdb * (0xFFFF/32000);
-
-       return 0;
-}
-
-static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-       struct nxt2002_state* state = fe->demodulator_priv;
-       u8 b[3];
-
-       nxt2002_readreg_multibyte(state,0xE6,b,3);
-       *ucblocks = b[2];
-
-       return 0;
-}
-
-static int nxt2002_sleep(struct dvb_frontend* fe)
-{
-       return 0;
-}
-
-static int nxt2002_init(struct dvb_frontend* fe)
-{
-       struct nxt2002_state* state = fe->demodulator_priv;
-       const struct firmware *fw;
-       int ret;
-       u8 buf[2];
-
-       if (!state->initialised) {
-               /* request the firmware, this will block until someone uploads it */
-               printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
-               ret = state->config->request_firmware(fe, &fw, NXT2002_DEFAULT_FIRMWARE);
-               printk("nxt2002: Waiting for firmware upload(2)...\n");
-               if (ret) {
-                       printk("nxt2002: no firmware upload (timeout or file not found?)\n");
-                       return ret;
-               }
-
-               ret = nxt2002_load_firmware(fe, fw);
-               if (ret) {
-                       printk("nxt2002: writing firmware to device failed\n");
-                       release_firmware(fw);
-                       return ret;
-               }
-               printk("nxt2002: firmware upload complete\n");
-
-               /* Put the micro into reset */
-               nxt2002_microcontroller_stop(state);
-
-               /* ensure transfer is complete */
-               buf[0]=0;
-               i2c_writebytes(state,0x2B,buf,1);
-
-               /* Put the micro into reset for real this time */
-               nxt2002_microcontroller_stop(state);
-
-               /* soft reset everything (agc,frontend,eq,fec)*/
-               buf[0] = 0x0F;
-               i2c_writebytes(state,0x08,buf,1);
-               buf[0] = 0x00;
-               i2c_writebytes(state,0x08,buf,1);
-
-               /* write agc sdm configure */
-               buf[0] = 0xF1;
-               i2c_writebytes(state,0x57,buf,1);
-
-               /* write mod output format */
-               buf[0] = 0x20;
-               i2c_writebytes(state,0x09,buf,1);
-
-               /* write fec mpeg mode */
-               buf[0] = 0x7E;
-               buf[1] = 0x00;
-               i2c_writebytes(state,0xE9,buf,2);
-
-               /* write mux selection */
-               buf[0] = 0x00;
-               i2c_writebytes(state,0xCC,buf,1);
-
-               state->initialised = 1;
-       }
-
-       return 0;
-}
-
-static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-       fesettings->min_delay_ms = 500;
-       fesettings->step_size = 0;
-       fesettings->max_drift = 0;
-       return 0;
-}
-
-static void nxt2002_release(struct dvb_frontend* fe)
-{
-       struct nxt2002_state* state = fe->demodulator_priv;
-       kfree(state);
-}
-
-static struct dvb_frontend_ops nxt2002_ops;
-
-struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
-                                  struct i2c_adapter* i2c)
-{
-       struct nxt2002_state* state = NULL;
-       u8 buf [] = {0,0,0,0,0};
-
-       /* allocate memory for the internal state */
-       state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
-       if (state == NULL) goto error;
-
-       /* setup the state */
-       state->config = config;
-       state->i2c = i2c;
-       memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
-       state->initialised = 0;
-
-       /* Check the first 5 registers to ensure this a revision we can handle */
-
-       i2c_readbytes(state, 0x00, buf, 5);
-       if (buf[0] != 0x04) goto error;         /* device id */
-       if (buf[1] != 0x02) goto error;         /* fab id */
-       if (buf[2] != 0x11) goto error;         /* month */
-       if (buf[3] != 0x20) goto error;         /* year msb */
-       if (buf[4] != 0x00) goto error;         /* year lsb */
-
-       /* create dvb_frontend */
-       state->frontend.ops = &state->ops;
-       state->frontend.demodulator_priv = state;
-       return &state->frontend;
-
-error:
-       kfree(state);
-       return NULL;
-}
-
-static struct dvb_frontend_ops nxt2002_ops = {
-
-       .info = {
-               .name = "Nextwave nxt2002 VSB/QAM frontend",
-               .type = FE_ATSC,
-               .frequency_min =  54000000,
-               .frequency_max = 860000000,
-               /* stepsize is just a guess */
-               .frequency_stepsize = 166666,
-               .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-                       FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-                       FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
-       },
-
-       .release = nxt2002_release,
-
-       .init = nxt2002_init,
-       .sleep = nxt2002_sleep,
-
-       .set_frontend = nxt2002_setup_frontend_parameters,
-       .get_tune_settings = nxt2002_get_tune_settings,
-
-       .read_status = nxt2002_read_status,
-       .read_ber = nxt2002_read_ber,
-       .read_signal_strength = nxt2002_read_signal_strength,
-       .read_snr = nxt2002_read_snr,
-       .read_ucblocks = nxt2002_read_ucblocks,
-
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("NXT2002 ATSC (8VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Taylor Jacob");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(nxt2002_attach);
diff --git a/drivers/media/dvb/frontends/nxt2002.h b/drivers/media/dvb/frontends/nxt2002.h
deleted file mode 100644 (file)
index 462301f..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
-   Driver for the Nxt2002 demodulator
-*/
-
-#ifndef NXT2002_H
-#define NXT2002_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct nxt2002_config
-{
-       /* the demodulator's i2c address */
-       u8 demod_address;
-
-       /* request firmware for device */
-       int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-extern struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
-                                          struct i2c_adapter* i2c);
-
-#endif // NXT2002_H
index 78d2b93d35b9d7670beab86263fa0dbd46c6be14..9e35353945099f69d073c24996802fa57ab53701 100644 (file)
@@ -1,9 +1,10 @@
 /*
  *    Support for NXT2002 and NXT2004 - VSB/QAM
  *
- *    Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
+ *    Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
+ *    Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
  *    based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
- *    and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
+ *    and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -614,7 +615,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
        /* write sdm1 input */
        buf[0] = 0x10;
        buf[1] = 0x00;
-       nxt200x_writebytes(state, 0x58, buf, 2);
+       switch (state->demod_chip) {
+               case NXT2002:
+                       nxt200x_writereg_multibyte(state, 0x58, buf, 2);
+                       break;
+               case NXT2004:
+                       nxt200x_writebytes(state, 0x58, buf, 2);
+                       break;
+               default:
+                       return -EINVAL;
+                       break;
+       }
 
        /* write sdmx input */
        switch (p->u.vsb.modulation) {
@@ -632,7 +643,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
                                break;
        }
        buf[1] = 0x00;
-       nxt200x_writebytes(state, 0x5C, buf, 2);
+       switch (state->demod_chip) {
+               case NXT2002:
+                       nxt200x_writereg_multibyte(state, 0x5C, buf, 2);
+                       break;
+               case NXT2004:
+                       nxt200x_writebytes(state, 0x5C, buf, 2);
+                       break;
+               default:
+                       return -EINVAL;
+                       break;
+       }
 
        /* write adc power lpf fc */
        buf[0] = 0x05;
@@ -648,7 +669,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
        /* write accumulator2 input */
        buf[0] = 0x80;
        buf[1] = 0x00;
-       nxt200x_writebytes(state, 0x4B, buf, 2);
+       switch (state->demod_chip) {
+               case NXT2002:
+                       nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+                       break;
+               case NXT2004:
+                       nxt200x_writebytes(state, 0x4B, buf, 2);
+                       break;
+               default:
+                       return -EINVAL;
+                       break;
+       }
 
        /* write kg1 */
        buf[0] = 0x00;
@@ -714,8 +745,19 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
        /* write accumulator2 input */
        buf[0] = 0x80;
        buf[1] = 0x00;
-       nxt200x_writebytes(state, 0x49, buf,2);
-       nxt200x_writebytes(state, 0x4B, buf,2);
+       switch (state->demod_chip) {
+               case NXT2002:
+                       nxt200x_writereg_multibyte(state, 0x49, buf, 2);
+                       nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+                       break;
+               case NXT2004:
+                       nxt200x_writebytes(state, 0x49, buf, 2);
+                       nxt200x_writebytes(state, 0x4B, buf, 2);
+                       break;
+               default:
+                       return -EINVAL;
+                       break;
+       }
 
        /* write agc control reg */
        buf[0] = 0x04;
@@ -1199,7 +1241,7 @@ module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob");
+MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob");
 MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(nxt200x_attach);