drm/exynos/decon5433: use mode info stored in CRTC to detect i80 mode

Since panel's mode of work is propagated properly from panel to DECON,
there is no need to use redundant private device tree property.
The only issue with such approach is that check for required interrupts
should be postponed until panel communicate its requirements, ie to
mode validation phase - mode_valid callback.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
index 0f5accea51a0a888c01c5c9d294cf30265df1eea..da183e05f2671a2195cbcf7d2c784511f1b6ce40 100644 (file)
--- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
+++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
@@ -34,9 +34,8 @@
 #define WINDOWS_NR     3
 #define MIN_FB_WIDTH_FOR_16WORD_BURST  128
 
-#define IFTYPE_I80     (1 << 0)
-#define I80_HW_TRG     (1 << 1)
-#define IFTYPE_HDMI    (1 << 2)
+#define I80_HW_TRG     (1 << 0)
+#define IFTYPE_HDMI    (1 << 1)
 
 static const char * const decon_clks_name[] = {
        "pclk",
@@ -93,7 +92,7 @@ static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
        u32 val;
 
        val = VIDINTCON0_INTEN;
-       if (ctx->out_type & IFTYPE_I80)
+       if (crtc->i80_mode)
                val |= VIDINTCON0_FRAMEDONE;
        else
                val |= VIDINTCON0_INTFRMEN | VIDINTCON0_FRAMESEL_FP;
@@ -142,7 +141,7 @@ static u32 decon_get_frame_count(struct decon_context *ctx, bool end)
 
        switch (status & (VIDCON1_VSTATUS_MASK | VIDCON1_I80_ACTIVE)) {
        case VIDCON1_VSTATUS_VS:
-               if (!(ctx->out_type & IFTYPE_I80))
+               if (!(ctx->crtc->i80_mode))
                        --frm;
                break;
        case VIDCON1_VSTATUS_BP:
@@ -169,7 +168,7 @@ static u32 decon_get_vblank_counter(struct exynos_drm_crtc *crtc)
 
 static void decon_setup_trigger(struct decon_context *ctx)
 {
-       if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)))
+       if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG))
                return;
 
        if (!(ctx->out_type & I80_HW_TRG)) {
@@ -209,7 +208,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
        val = VIDOUT_LCD_ON;
        if (interlaced)
                val |= VIDOUT_INTERLACE_EN_F;
-       if (ctx->out_type & IFTYPE_I80) {
+       if (crtc->i80_mode) {
                val |= VIDOUT_COMMAND_IF;
        } else {
                val |= VIDOUT_RGB_IF;
@@ -225,7 +224,7 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
                        VIDTCON2_HOZVAL(m->hdisplay - 1);
        writel(val, ctx->addr + DECON_VIDTCON2);
 
-       if (!(ctx->out_type & IFTYPE_I80)) {
+       if (!crtc->i80_mode) {
                int vbp = m->crtc_vtotal - m->crtc_vsync_end;
                int vfp = m->crtc_vsync_start - m->crtc_vdisplay;
 
@@ -513,6 +512,22 @@ err:
                clk_disable_unprepare(ctx->clks[i]);
 }
 
+static enum drm_mode_status decon_mode_valid(struct exynos_drm_crtc *crtc,
+               const struct drm_display_mode *mode)
+{
+       struct decon_context *ctx = crtc->ctx;
+
+       ctx->irq = crtc->i80_mode ? ctx->irq_lcd_sys : ctx->irq_vsync;
+
+       if (ctx->irq)
+               return MODE_OK;
+
+       dev_info(ctx->dev, "Sink requires %s mode, but appropriate interrupt is not provided.\n",
+                       crtc->i80_mode ? "command" : "video");
+
+       return MODE_BAD;
+}
+
 static const struct exynos_drm_crtc_ops decon_crtc_ops = {
        .enable                 = decon_enable,
        .disable                = decon_disable,
@@ -522,6 +537,7 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = {
        .atomic_begin           = decon_atomic_begin,
        .update_plane           = decon_update_plane,
        .disable_plane          = decon_disable_plane,
+       .mode_valid             = decon_mode_valid,
        .atomic_flush           = decon_atomic_flush,
 };
 
@@ -715,11 +731,8 @@ static int exynos5433_decon_probe(struct platform_device *pdev)
        ctx->out_type = (unsigned long)of_device_get_match_data(dev);
        spin_lock_init(&ctx->vblank_lock);
 
-       if (ctx->out_type & IFTYPE_HDMI) {
+       if (ctx->out_type & IFTYPE_HDMI)
                ctx->first_win = 1;
-       } else if (of_get_child_by_name(dev->of_node, "i80-if-timings")) {
-               ctx->out_type |= IFTYPE_I80;
-       }
 
        for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
                struct clk *clk;
@@ -753,9 +766,6 @@ static int exynos5433_decon_probe(struct platform_device *pdev)
                return ret;
        ctx->irq_lcd_sys = ret;
 
-       ctx->irq = (ctx->out_type & IFTYPE_I80) ? ctx->irq_lcd_sys
-                                               : ctx->irq_vsync;
-
        ret = decon_conf_irq(ctx, "te", decon_te_irq_handler,
                        IRQF_TRIGGER_RISING);
        if (ret < 0)