#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
+#include <linux/of_mdio.h>
#include <net/dsa.h>
#include <linux/ethtool.h>
#include <linux/if_bridge.h>
return 0;
}
+static int bcm_sf2_sw_indir_rw(struct bcm_sf2_priv *priv, int op, int addr,
+ int regnum, u16 val)
+{
+ int ret = 0;
+ u32 reg;
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg |= MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ /* Page << 8 | offset */
+ reg = 0x70;
+ reg <<= 2;
+ core_writel(priv, addr, reg);
+
+ /* Page << 8 | offset */
+ reg = 0x80 << 8 | regnum << 1;
+ reg <<= 2;
+
+ if (op)
+ ret = core_readl(priv, reg);
+ else
+ core_writel(priv, val, reg);
+
+ reg = reg_readl(priv, REG_SWITCH_CNTRL);
+ reg &= ~MDIO_MASTER_SEL;
+ reg_writel(priv, reg, REG_SWITCH_CNTRL);
+
+ return ret & 0xffff;
+}
+
+static int bcm_sf2_sw_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct bcm_sf2_priv *priv = bus->priv;
+
+ /* Intercept reads from Broadcom pseudo-PHY address, else, send
+ * them to our master MDIO bus controller
+ */
+ if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
+ return bcm_sf2_sw_indir_rw(priv, 1, addr, regnum, 0);
+ else
+ return mdiobus_read(priv->master_mii_bus, addr, regnum);
+}
+
+static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct bcm_sf2_priv *priv = bus->priv;
+
+ /* Intercept writes to the Broadcom pseudo-PHY address, else,
+ * send them to our master MDIO bus controller
+ */
+ if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
+ bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
+ else
+ mdiobus_write(priv->master_mii_bus, addr, regnum, val);
+
+ return 0;
+}
+
static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
{
struct bcm_sf2_priv *priv = dev_id;
}
}
+static int bcm_sf2_mdio_register(struct dsa_switch *ds)
+{
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+ struct device_node *dn;
+ static int index;
+ int err;
+
+ /* Find our integrated MDIO bus node */
+ dn = of_find_compatible_node(NULL, NULL, "brcm,unimac-mdio");
+ priv->master_mii_bus = of_mdio_find_bus(dn);
+ if (!priv->master_mii_bus)
+ return -EPROBE_DEFER;
+
+ get_device(&priv->master_mii_bus->dev);
+ priv->master_mii_dn = dn;
+
+ priv->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
+ if (!priv->slave_mii_bus)
+ return -ENOMEM;
+
+ priv->slave_mii_bus->priv = priv;
+ priv->slave_mii_bus->name = "sf2 slave mii";
+ priv->slave_mii_bus->read = bcm_sf2_sw_mdio_read;
+ priv->slave_mii_bus->write = bcm_sf2_sw_mdio_write;
+ snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "sf2-%d",
+ index++);
+ priv->slave_mii_bus->dev.of_node = dn;
+
+ /* Include the pseudo-PHY address to divert reads towards our
+ * workaround. This is only required for 7445D0, since 7445E0
+ * disconnects the internal switch pseudo-PHY such that we can use the
+ * regular SWITCH_MDIO master controller instead.
+ *
+ * Here we flag the pseudo PHY as needing special treatment and would
+ * otherwise make all other PHY read/writes go to the master MDIO bus
+ * controller that comes with this switch backed by the "mdio-unimac"
+ * driver.
+ */
+ if (of_machine_is_compatible("brcm,bcm7445d0"))
+ priv->indir_phy_mask |= (1 << BRCM_PSEUDO_PHY_ADDR);
+ else
+ priv->indir_phy_mask = 0;
+
+ ds->phys_mii_mask = priv->indir_phy_mask;
+ ds->slave_mii_bus = priv->slave_mii_bus;
+ priv->slave_mii_bus->parent = ds->dev->parent;
+ priv->slave_mii_bus->phy_mask = ~priv->indir_phy_mask;
+
+ if (dn)
+ err = of_mdiobus_register(priv->slave_mii_bus, dn);
+ else
+ err = mdiobus_register(priv->slave_mii_bus);
+
+ if (err)
+ of_node_put(dn);
+
+ return err;
+}
+
+static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv)
+{
+ mdiobus_unregister(priv->slave_mii_bus);
+ if (priv->master_mii_dn)
+ of_node_put(priv->master_mii_dn);
+}
+
static int bcm_sf2_sw_setup(struct dsa_switch *ds)
{
const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
goto out_unmap;
}
+ ret = bcm_sf2_mdio_register(ds);
+ if (ret) {
+ pr_err("failed to register MDIO bus\n");
+ goto out_unmap;
+ }
+
/* Disable all interrupts and request them */
bcm_sf2_intr_disable(priv);
bcm_sf2_port_disable(ds, port, NULL);
}
- /* Include the pseudo-PHY address and the broadcast PHY address to
- * divert reads towards our workaround. This is only required for
- * 7445D0, since 7445E0 disconnects the internal switch pseudo-PHY such
- * that we can use the regular SWITCH_MDIO master controller instead.
- *
- * By default, DSA initializes ds->phys_mii_mask to
- * ds->enabled_port_mask to have a 1:1 mapping between Port address
- * and PHY address in order to utilize the slave_mii_bus instance to
- * read from Port PHYs. This is not what we want here, so we
- * initialize phys_mii_mask 0 to always utilize the "master" MDIO
- * bus backed by the "mdio-unimac" driver.
- */
- if (of_machine_is_compatible("brcm,bcm7445d0"))
- ds->phys_mii_mask |= ((1 << BRCM_PSEUDO_PHY_ADDR) | (1 << 0));
- else
- ds->phys_mii_mask = 0;
-
rev = reg_readl(priv, REG_SWITCH_REVISION);
priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
SWITCH_TOP_REV_MASK;
iounmap(*base);
base++;
}
+ bcm_sf2_mdio_unregister(priv);
return ret;
}
return priv->hw_params.gphy_rev;
}
-static int bcm_sf2_sw_indir_rw(struct dsa_switch *ds, int op, int addr,
- int regnum, u16 val)
-{
- struct bcm_sf2_priv *priv = ds_to_priv(ds);
- int ret = 0;
- u32 reg;
-
- reg = reg_readl(priv, REG_SWITCH_CNTRL);
- reg |= MDIO_MASTER_SEL;
- reg_writel(priv, reg, REG_SWITCH_CNTRL);
-
- /* Page << 8 | offset */
- reg = 0x70;
- reg <<= 2;
- core_writel(priv, addr, reg);
-
- /* Page << 8 | offset */
- reg = 0x80 << 8 | regnum << 1;
- reg <<= 2;
-
- if (op)
- ret = core_readl(priv, reg);
- else
- core_writel(priv, val, reg);
-
- reg = reg_readl(priv, REG_SWITCH_CNTRL);
- reg &= ~MDIO_MASTER_SEL;
- reg_writel(priv, reg, REG_SWITCH_CNTRL);
-
- return ret & 0xffff;
-}
-
-static int bcm_sf2_sw_phy_read(struct dsa_switch *ds, int addr, int regnum)
-{
- /* Intercept reads from the MDIO broadcast address or Broadcom
- * pseudo-PHY address
- */
- switch (addr) {
- case 0:
- case BRCM_PSEUDO_PHY_ADDR:
- return bcm_sf2_sw_indir_rw(ds, 1, addr, regnum, 0);
- default:
- return 0xffff;
- }
-}
-
-static int bcm_sf2_sw_phy_write(struct dsa_switch *ds, int addr, int regnum,
- u16 val)
-{
- /* Intercept writes to the MDIO broadcast address or Broadcom
- * pseudo-PHY address
- */
- switch (addr) {
- case 0:
- case BRCM_PSEUDO_PHY_ADDR:
- bcm_sf2_sw_indir_rw(ds, 0, addr, regnum, val);
- break;
- }
-
- return 0;
-}
-
static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
.setup = bcm_sf2_sw_setup,
.set_addr = bcm_sf2_sw_set_addr,
.get_phy_flags = bcm_sf2_sw_get_phy_flags,
- .phy_read = bcm_sf2_sw_phy_read,
- .phy_write = bcm_sf2_sw_phy_write,
.get_strings = bcm_sf2_sw_get_strings,
.get_ethtool_stats = bcm_sf2_sw_get_ethtool_stats,
.get_sset_count = bcm_sf2_sw_get_sset_count,
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff