ixgbe: update ntuple filter configuration
authorAlexander Duyck <alexander.h.duyck@intel.com>
Thu, 6 Jan 2011 14:29:59 +0000 (14:29 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 10 Jan 2011 07:44:12 +0000 (23:44 -0800)
This change fixes several issues found in ntuple filtering while I was
doing the ATR refactor.

Specifically I updated the masks to work correctly with the latest version
of ethtool, I cleaned up the exception handling and added detailed error
output when a filter is rejected, and corrected several bits that were set
incorrectly in ixgbe_type.h.

The previous version of this patch included a printk that was left over from
me fixing the filter setup.  This patch does not include that printk.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ixgbe/ixgbe.h
drivers/net/ixgbe/ixgbe_82599.c
drivers/net/ixgbe/ixgbe_ethtool.c
drivers/net/ixgbe/ixgbe_main.c
drivers/net/ixgbe/ixgbe_type.h

index 341b3db2e7db81001625e71442ed9082e16f970e..3b8c924636171ac9078ff15b0d1c1f2c29b98dad 100644 (file)
@@ -533,20 +533,6 @@ extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
                                       union ixgbe_atr_input *input,
                                       struct ixgbe_atr_input_masks *input_masks,
                                       u16 soft_id, u8 queue);
-extern s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input,
-                                       u16 vlan_id);
-extern s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input,
-                                        u32 src_addr);
-extern s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input,
-                                        u32 dst_addr);
-extern s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input,
-                                        u16 src_port);
-extern s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input,
-                                        u16 dst_port);
-extern s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
-                                         u16 flex_byte);
-extern s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input,
-                                      u8 l4type);
 extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
                                    struct ixgbe_ring *ring);
 extern void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter,
index d41931f5c3d32a5403743fd14983a66a4a210521..8d316d9cd29d40c0b59b0db9de2fff1ec1e76638 100644 (file)
@@ -1421,211 +1421,6 @@ static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
        return sig_hash ^ bucket_hash;
 }
 
-/**
- *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
- *  @input: input stream to modify
- *  @vlan: the VLAN id to load
- **/
-s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input, __be16 vlan)
-{
-       input->formatted.vlan_id = vlan;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
- *  @input: input stream to modify
- *  @src_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input, __be32 src_addr)
-{
-       input->formatted.src_ip[0] = src_addr;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
- *  @input: input stream to modify
- *  @dst_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input, __be32 dst_addr)
-{
-       input->formatted.dst_ip[0] = dst_addr;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_set_src_port_82599 - Sets the source port
- *  @input: input stream to modify
- *  @src_port: the source port to load
- **/
-s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input, __be16 src_port)
-{
-       input->formatted.src_port = src_port;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_set_dst_port_82599 - Sets the destination port
- *  @input: input stream to modify
- *  @dst_port: the destination port to load
- **/
-s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input, __be16 dst_port)
-{
-       input->formatted.dst_port = dst_port;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
- *  @input: input stream to modify
- *  @flex_bytes: the flexible bytes to load
- **/
-s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input,
-                                 __be16 flex_bytes)
-{
-       input->formatted.flex_bytes = flex_bytes;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
- *  @input: input stream to modify
- *  @l4type: the layer 4 type value to load
- **/
-s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input, u8 l4type)
-{
-       input->formatted.flow_type = l4type;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
- *  @input: input stream to search
- *  @vlan: the VLAN id to load
- **/
-static s32 ixgbe_atr_get_vlan_id_82599(union ixgbe_atr_input *input, __be16 *vlan)
-{
-       *vlan = input->formatted.vlan_id;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
- *  @input: input stream to search
- *  @src_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv4_82599(union ixgbe_atr_input *input,
-                                        __be32 *src_addr)
-{
-       *src_addr = input->formatted.src_ip[0];
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
- *  @input: input stream to search
- *  @dst_addr: the IP address to load
- **/
-static s32 ixgbe_atr_get_dst_ipv4_82599(union ixgbe_atr_input *input,
-                                        __be32 *dst_addr)
-{
-       *dst_addr = input->formatted.dst_ip[0];
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
- *  @input: input stream to search
- *  @src_addr_1: the first 4 bytes of the IP address to load
- *  @src_addr_2: the second 4 bytes of the IP address to load
- *  @src_addr_3: the third 4 bytes of the IP address to load
- *  @src_addr_4: the fourth 4 bytes of the IP address to load
- **/
-static s32 ixgbe_atr_get_src_ipv6_82599(union ixgbe_atr_input *input,
-                                        __be32 *src_addr_0, __be32 *src_addr_1,
-                                        __be32 *src_addr_2, __be32 *src_addr_3)
-{
-       *src_addr_0 = input->formatted.src_ip[0];
-       *src_addr_1 = input->formatted.src_ip[1];
-       *src_addr_2 = input->formatted.src_ip[2];
-       *src_addr_3 = input->formatted.src_ip[3];
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_src_port_82599 - Gets the source port
- *  @input: input stream to modify
- *  @src_port: the source port to load
- *
- *  Even though the input is given in big-endian, the FDIRPORT registers
- *  expect the ports to be programmed in little-endian.  Hence the need to swap
- *  endianness when retrieving the data.  This can be confusing since the
- *  internal hash engine expects it to be big-endian.
- **/
-static s32 ixgbe_atr_get_src_port_82599(union ixgbe_atr_input *input,
-                                        __be16 *src_port)
-{
-       *src_port = input->formatted.src_port;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_dst_port_82599 - Gets the destination port
- *  @input: input stream to modify
- *  @dst_port: the destination port to load
- *
- *  Even though the input is given in big-endian, the FDIRPORT registers
- *  expect the ports to be programmed in little-endian.  Hence the need to swap
- *  endianness when retrieving the data.  This can be confusing since the
- *  internal hash engine expects it to be big-endian.
- **/
-static s32 ixgbe_atr_get_dst_port_82599(union ixgbe_atr_input *input,
-                                        __be16 *dst_port)
-{
-       *dst_port = input->formatted.dst_port;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes
- *  @input: input stream to modify
- *  @flex_bytes: the flexible bytes to load
- **/
-static s32 ixgbe_atr_get_flex_byte_82599(union ixgbe_atr_input *input,
-                                         __be16 *flex_bytes)
-{
-       *flex_bytes = input->formatted.flex_bytes;
-
-       return 0;
-}
-
-/**
- *  ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type
- *  @input: input stream to modify
- *  @l4type: the layer 4 type value to load
- **/
-static s32 ixgbe_atr_get_l4type_82599(union ixgbe_atr_input *input,
-                                      u8 *l4type)
-{
-       *l4type = input->formatted.flow_type;
-
-       return 0;
-}
-
 /**
  *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
  *  @hw: pointer to hardware structure
@@ -1678,6 +1473,43 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
        return 0;
 }
 
+/**
+ *  ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ *  @input_mask: mask to be bit swapped
+ *
+ *  The source and destination port masks for flow director are bit swapped
+ *  in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc.  In order to
+ *  generate a correctly swapped value we need to bit swap the mask and that
+ *  is what is accomplished by this function.
+ **/
+static u32 ixgbe_get_fdirtcpm_82599(struct ixgbe_atr_input_masks *input_masks)
+{
+       u32 mask = ntohs(input_masks->dst_port_mask);
+       mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+       mask |= ntohs(input_masks->src_port_mask);
+       mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+       mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+       mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+       return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian.  As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+       (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+        (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+       IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+       (((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
 /**
  *  ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
  *  @hw: pointer to hardware structure
@@ -1694,131 +1526,135 @@ s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
                                       struct ixgbe_atr_input_masks *input_masks,
                                       u16 soft_id, u8 queue)
 {
-       u32 fdircmd = 0;
        u32 fdirhash;
-       u32 src_ipv4 = 0, dst_ipv4 = 0;
-       u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
-       u16 src_port, dst_port, vlan_id, flex_bytes;
-       u16 bucket_hash;
-       u8  l4type;
-       u8  fdirm = 0;
-
-       /* Get our input values */
-       ixgbe_atr_get_l4type_82599(input, &l4type);
+       u32 fdircmd;
+       u32 fdirport, fdirtcpm;
+       u32 fdirvlan;
+       /* start with VLAN, flex bytes, VM pool, and IPv6 destination masked */
+       u32 fdirm = IXGBE_FDIRM_VLANID | IXGBE_FDIRM_VLANP | IXGBE_FDIRM_FLEX |
+                   IXGBE_FDIRM_POOL | IXGBE_FDIRM_DIPv6;
 
        /*
-        * Check l4type formatting, and bail out before we touch the hardware
+        * Check flow_type formatting, and bail out before we touch the hardware
         * if there's a configuration issue
         */
-       switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
-       case IXGBE_ATR_L4TYPE_TCP:
-               fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
-               break;
-       case IXGBE_ATR_L4TYPE_UDP:
-               fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
-               break;
-       case IXGBE_ATR_L4TYPE_SCTP:
-               fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
+       switch (input->formatted.flow_type) {
+       case IXGBE_ATR_FLOW_TYPE_IPV4:
+               /* use the L4 protocol mask for raw IPv4/IPv6 traffic */
+               fdirm |= IXGBE_FDIRM_L4P;
+       case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+               if (input_masks->dst_port_mask || input_masks->src_port_mask) {
+                       hw_dbg(hw, " Error on src/dst port mask\n");
+                       return IXGBE_ERR_CONFIG;
+               }
+       case IXGBE_ATR_FLOW_TYPE_TCPV4:
+       case IXGBE_ATR_FLOW_TYPE_UDPV4:
                break;
        default:
-               hw_dbg(hw, "Error on l4type input\n");
+               hw_dbg(hw, " Error on flow type input\n");
                return IXGBE_ERR_CONFIG;
        }
 
-       bucket_hash = ixgbe_atr_compute_hash_82599(input,
-                                                  IXGBE_ATR_BUCKET_HASH_KEY);
-
-       /* bucket_hash is only 15 bits */
-       bucket_hash &= IXGBE_ATR_HASH_MASK;
-
-       ixgbe_atr_get_vlan_id_82599(input, &vlan_id);
-       ixgbe_atr_get_src_port_82599(input, &src_port);
-       ixgbe_atr_get_dst_port_82599(input, &dst_port);
-       ixgbe_atr_get_flex_byte_82599(input, &flex_bytes);
-
-       fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
-
-       /* Now figure out if we're IPv4 or IPv6 */
-       if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) {
-               /* IPv6 */
-               ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2,
-                                            &src_ipv6_3, &src_ipv6_4);
-
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1);
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2);
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3);
-               /* The last 4 bytes is the same register as IPv4 */
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4);
-
-               fdircmd |= IXGBE_FDIRCMD_IPV6;
-               fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH;
-       } else {
-               /* IPv4 */
-               ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
-       }
-
-       ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
-       IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4);
-
-       IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
-                                   (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
-       IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
-                     (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
-
        /*
-        * Program the relevant mask registers.  L4type cannot be
-        * masked out in this implementation.
+        * Program the relevant mask registers.  If src/dst_port or src/dst_addr
+        * are zero, then assume a full mask for that field.  Also assume that
+        * a VLAN of 0 is unspecified, so mask that out as well.  L4type
+        * cannot be masked out in this implementation.
         *
         * This also assumes IPv4 only.  IPv6 masking isn't supported at this
         * point in time.
         */
-       IXGBE_WRITE_REG(hw, IXGBE_FDIRSIP4M, input_masks->src_ip_mask);
-       IXGBE_WRITE_REG(hw, IXGBE_FDIRDIP4M, input_masks->dst_ip_mask);
-
-       switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
-       case IXGBE_ATR_L4TYPE_TCP:
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, input_masks->src_port_mask);
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
-                               (IXGBE_READ_REG(hw, IXGBE_FDIRTCPM) |
-                                (input_masks->dst_port_mask << 16)));
+
+       /* Program FDIRM */
+       switch (ntohs(input_masks->vlan_id_mask) & 0xEFFF) {
+       case 0xEFFF:
+               /* Unmask VLAN ID - bit 0 and fall through to unmask prio */
+               fdirm &= ~IXGBE_FDIRM_VLANID;
+       case 0xE000:
+               /* Unmask VLAN prio - bit 1 */
+               fdirm &= ~IXGBE_FDIRM_VLANP;
                break;
-       case IXGBE_ATR_L4TYPE_UDP:
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, input_masks->src_port_mask);
-               IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
-                               (IXGBE_READ_REG(hw, IXGBE_FDIRUDPM) |
-                                (input_masks->src_port_mask << 16)));
+       case 0x0FFF:
+               /* Unmask VLAN ID - bit 0 */
+               fdirm &= ~IXGBE_FDIRM_VLANID;
                break;
-       default:
-               /* this already would have failed above */
+       case 0x0000:
+               /* do nothing, vlans already masked */
                break;
+       default:
+               hw_dbg(hw, " Error on VLAN mask\n");
+               return IXGBE_ERR_CONFIG;
        }
 
-       /* Program the last mask register, FDIRM */
-       if (input_masks->vlan_id_mask)
-               /* Mask both VLAN and VLANP - bits 0 and 1 */
-               fdirm |= 0x3;
-
-       if (input_masks->data_mask)
-               /* Flex bytes need masking, so mask the whole thing - bit 4 */
-               fdirm |= 0x10;
+       if (input_masks->flex_mask & 0xFFFF) {
+               if ((input_masks->flex_mask & 0xFFFF) != 0xFFFF) {
+                       hw_dbg(hw, " Error on flexible byte mask\n");
+                       return IXGBE_ERR_CONFIG;
+               }
+               /* Unmask Flex Bytes - bit 4 */
+               fdirm &= ~IXGBE_FDIRM_FLEX;
+       }
 
        /* Now mask VM pool and destination IPv6 - bits 5 and 2 */
-       fdirm |= 0x24;
-
        IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
 
-       fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
-       fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
-       fdircmd |= IXGBE_FDIRCMD_LAST;
-       fdircmd |= IXGBE_FDIRCMD_QUEUE_EN;
-       fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+       /* store the TCP/UDP port masks, bit reversed from port layout */
+       fdirtcpm = ixgbe_get_fdirtcpm_82599(input_masks);
+
+       /* write both the same so that UDP and TCP use the same mask */
+       IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+       IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+
+       /* store source and destination IP masks (big-enian) */
+       IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+                            ~input_masks->src_ip_mask[0]);
+       IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+                            ~input_masks->dst_ip_mask[0]);
+
+       /* Apply masks to input data */
+       input->formatted.vlan_id &= input_masks->vlan_id_mask;
+       input->formatted.flex_bytes &= input_masks->flex_mask;
+       input->formatted.src_port &= input_masks->src_port_mask;
+       input->formatted.dst_port &= input_masks->dst_port_mask;
+       input->formatted.src_ip[0] &= input_masks->src_ip_mask[0];
+       input->formatted.dst_ip[0] &= input_masks->dst_ip_mask[0];
+
+       /* record vlan (little-endian) and flex_bytes(big-endian) */
+       fdirvlan =
+               IXGBE_STORE_AS_BE16(ntohs(input->formatted.flex_bytes));
+       fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+       fdirvlan |= ntohs(input->formatted.vlan_id);
+       IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+       /* record source and destination port (little-endian)*/
+       fdirport = ntohs(input->formatted.dst_port);
+       fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+       fdirport |= ntohs(input->formatted.src_port);
+       IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+
+       /* record the first 32 bits of the destination address (big-endian) */
+       IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
+       /* record the source address (big-endian) */
+       IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+       /* configure FDIRCMD register */
+       fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+                 IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+       fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+       fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+       /* we only want the bucket hash so drop the upper 16 bits */
+       fdirhash = ixgbe_atr_compute_hash_82599(input,
+                                               IXGBE_ATR_BUCKET_HASH_KEY);
+       fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
 
        IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
        IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
 
        return 0;
 }
+
 /**
  *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
  *  @hw: pointer to hardware structure
index 76e40e2b37e5e54e50767bba9b09bf045197d6c8..2002ea88ca2af8377240eebd60a177a8abc641db 100644 (file)
@@ -2277,10 +2277,11 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
                                struct ethtool_rx_ntuple *cmd)
 {
        struct ixgbe_adapter *adapter = netdev_priv(dev);
-       struct ethtool_rx_ntuple_flow_spec fs = cmd->fs;
+       struct ethtool_rx_ntuple_flow_spec *fs = &cmd->fs;
        union ixgbe_atr_input input_struct;
        struct ixgbe_atr_input_masks input_masks;
        int target_queue;
+       int err;
 
        if (adapter->hw.mac.type == ixgbe_mac_82598EB)
                return -EOPNOTSUPP;
@@ -2289,67 +2290,122 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
         * Don't allow programming if the action is a queue greater than
         * the number of online Tx queues.
         */
-       if ((fs.action >= adapter->num_tx_queues) ||
-           (fs.action < ETHTOOL_RXNTUPLE_ACTION_DROP))
+       if ((fs->action >= adapter->num_tx_queues) ||
+           (fs->action < ETHTOOL_RXNTUPLE_ACTION_DROP))
                return -EINVAL;
 
        memset(&input_struct, 0, sizeof(union ixgbe_atr_input));
        memset(&input_masks, 0, sizeof(struct ixgbe_atr_input_masks));
 
-       input_masks.src_ip_mask = fs.m_u.tcp_ip4_spec.ip4src;
-       input_masks.dst_ip_mask = fs.m_u.tcp_ip4_spec.ip4dst;
-       input_masks.src_port_mask = fs.m_u.tcp_ip4_spec.psrc;
-       input_masks.dst_port_mask = fs.m_u.tcp_ip4_spec.pdst;
-       input_masks.vlan_id_mask = fs.vlan_tag_mask;
-       /* only use the lowest 2 bytes for flex bytes */
-       input_masks.data_mask = (fs.data_mask & 0xffff);
-
-       switch (fs.flow_type) {
+       /* record flow type */
+       switch (fs->flow_type) {
+       case IPV4_FLOW:
+               input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_IPV4;
+               break;
        case TCP_V4_FLOW:
-               ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_TCP);
+               input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
                break;
        case UDP_V4_FLOW:
-               ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_UDP);
+               input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
                break;
        case SCTP_V4_FLOW:
-               ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_SCTP);
+               input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
                break;
        default:
                return -1;
        }
 
-       /* Mask bits from the inputs based on user-supplied mask */
-       ixgbe_atr_set_src_ipv4_82599(&input_struct,
-                   (fs.h_u.tcp_ip4_spec.ip4src & ~fs.m_u.tcp_ip4_spec.ip4src));
-       ixgbe_atr_set_dst_ipv4_82599(&input_struct,
-                   (fs.h_u.tcp_ip4_spec.ip4dst & ~fs.m_u.tcp_ip4_spec.ip4dst));
-       /* 82599 expects these to be byte-swapped for perfect filtering */
-       ixgbe_atr_set_src_port_82599(&input_struct,
-              ((ntohs(fs.h_u.tcp_ip4_spec.psrc)) & ~fs.m_u.tcp_ip4_spec.psrc));
-       ixgbe_atr_set_dst_port_82599(&input_struct,
-              ((ntohs(fs.h_u.tcp_ip4_spec.pdst)) & ~fs.m_u.tcp_ip4_spec.pdst));
-
-       /* VLAN and Flex bytes are either completely masked or not */
-       if (!fs.vlan_tag_mask)
-               ixgbe_atr_set_vlan_id_82599(&input_struct, fs.vlan_tag);
-
-       if (!input_masks.data_mask)
-               /* make sure we only use the first 2 bytes of user data */
-               ixgbe_atr_set_flex_byte_82599(&input_struct,
-                                             (fs.data & 0xffff));
+       /* copy vlan tag minus the CFI bit */
+       if ((fs->vlan_tag & 0xEFFF) || (~fs->vlan_tag_mask & 0xEFFF)) {
+               input_struct.formatted.vlan_id = htons(fs->vlan_tag & 0xEFFF);
+               if (!fs->vlan_tag_mask) {
+                       input_masks.vlan_id_mask = htons(0xEFFF);
+               } else {
+                       switch (~fs->vlan_tag_mask & 0xEFFF) {
+                       /* all of these are valid vlan-mask values */
+                       case 0xEFFF:
+                       case 0xE000:
+                       case 0x0FFF:
+                       case 0x0000:
+                               input_masks.vlan_id_mask =
+                                       htons(~fs->vlan_tag_mask);
+                               break;
+                       /* exit with error if vlan-mask is invalid */
+                       default:
+                               e_err(drv, "Partial VLAN ID or "
+                                     "priority mask in vlan-mask is not "
+                                     "supported by hardware\n");
+                               return -1;
+                       }
+               }
+       }
+
+       /* make sure we only use the first 2 bytes of user data */
+       if ((fs->data & 0xFFFF) || (~fs->data_mask & 0xFFFF)) {
+               input_struct.formatted.flex_bytes = htons(fs->data & 0xFFFF);
+               if (!(fs->data_mask & 0xFFFF)) {
+                       input_masks.flex_mask = 0xFFFF;
+               } else if (~fs->data_mask & 0xFFFF) {
+                       e_err(drv, "Partial user-def-mask is not "
+                             "supported by hardware\n");
+                       return -1;
+               }
+       }
+
+       /*
+        * Copy input into formatted structures
+        *
+        * These assignments are based on the following logic
+        * If neither input or mask are set assume value is masked out.
+        * If input is set, but mask is not mask should default to accept all.
+        * If input is not set, but mask is set then mask likely results in 0.
+        * If input is set and mask is set then assign both.
+        */
+       if (fs->h_u.tcp_ip4_spec.ip4src || ~fs->m_u.tcp_ip4_spec.ip4src) {
+               input_struct.formatted.src_ip[0] = fs->h_u.tcp_ip4_spec.ip4src;
+               if (!fs->m_u.tcp_ip4_spec.ip4src)
+                       input_masks.src_ip_mask[0] = 0xFFFFFFFF;
+               else
+                       input_masks.src_ip_mask[0] =
+                               ~fs->m_u.tcp_ip4_spec.ip4src;
+       }
+       if (fs->h_u.tcp_ip4_spec.ip4dst || ~fs->m_u.tcp_ip4_spec.ip4dst) {
+               input_struct.formatted.dst_ip[0] = fs->h_u.tcp_ip4_spec.ip4dst;
+               if (!fs->m_u.tcp_ip4_spec.ip4dst)
+                       input_masks.dst_ip_mask[0] = 0xFFFFFFFF;
+               else
+                       input_masks.dst_ip_mask[0] =
+                               ~fs->m_u.tcp_ip4_spec.ip4dst;
+       }
+       if (fs->h_u.tcp_ip4_spec.psrc || ~fs->m_u.tcp_ip4_spec.psrc) {
+               input_struct.formatted.src_port = fs->h_u.tcp_ip4_spec.psrc;
+               if (!fs->m_u.tcp_ip4_spec.psrc)
+                       input_masks.src_port_mask = 0xFFFF;
+               else
+                       input_masks.src_port_mask = ~fs->m_u.tcp_ip4_spec.psrc;
+       }
+       if (fs->h_u.tcp_ip4_spec.pdst || ~fs->m_u.tcp_ip4_spec.pdst) {
+               input_struct.formatted.dst_port = fs->h_u.tcp_ip4_spec.pdst;
+               if (!fs->m_u.tcp_ip4_spec.pdst)
+                       input_masks.dst_port_mask = 0xFFFF;
+               else
+                       input_masks.dst_port_mask = ~fs->m_u.tcp_ip4_spec.pdst;
+       }
 
        /* determine if we need to drop or route the packet */
-       if (fs.action == ETHTOOL_RXNTUPLE_ACTION_DROP)
+       if (fs->action == ETHTOOL_RXNTUPLE_ACTION_DROP)
                target_queue = MAX_RX_QUEUES - 1;
        else
-               target_queue = fs.action;
+               target_queue = fs->action;
 
        spin_lock(&adapter->fdir_perfect_lock);
-       ixgbe_fdir_add_perfect_filter_82599(&adapter->hw, &input_struct,
-                                           &input_masks, 0, target_queue);
+       err = ixgbe_fdir_add_perfect_filter_82599(&adapter->hw,
+                                                 &input_struct,
+                                                 &input_masks, 0,
+                                                 target_queue);
        spin_unlock(&adapter->fdir_perfect_lock);
 
-       return 0;
+       return err ? -1 : 0;
 }
 
 static const struct ethtool_ops ixgbe_ethtool_ops = {
index 490818c46d74f869588d04cbee489943651e3693..a060610a42dbddf22429d7762c57a6f1d3723d3f 100644 (file)
@@ -4821,6 +4821,12 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
 
        adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
        adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+       if (adapter->flags & (IXGBE_FLAG_FDIR_HASH_CAPABLE |
+                             IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) {
+               e_err(probe,
+                     "Flow Director is not supported while multiple "
+                     "queues are disabled.  Disabling Flow Director\n");
+       }
        adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
        adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
        adapter->atr_sample_rate = 0;
@@ -5126,16 +5132,11 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
                adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
                if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
                        adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
-               if (dev->features & NETIF_F_NTUPLE) {
-                       /* Flow Director perfect filter enabled */
-                       adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
-                       adapter->atr_sample_rate = 0;
-                       spin_lock_init(&adapter->fdir_perfect_lock);
-               } else {
-                       /* Flow Director hash filters enabled */
-                       adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
-                       adapter->atr_sample_rate = 20;
-               }
+               /* n-tuple support exists, always init our spinlock */
+               spin_lock_init(&adapter->fdir_perfect_lock);
+               /* Flow Director hash filters enabled */
+               adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+               adapter->atr_sample_rate = 20;
                adapter->ring_feature[RING_F_FDIR].indices =
                                                         IXGBE_MAX_FDIR_INDICES;
                adapter->fdir_pballoc = 0;
index 0d9392d92a0f06b40f7eeb48470caa535211a4a3..fd3358f54139e1a9f1eaad1a6a6588009b97dda4 100644 (file)
@@ -1947,10 +1947,9 @@ enum ixgbe_fdir_pballoc_type {
 #define IXGBE_FDIRM_VLANID                      0x00000001
 #define IXGBE_FDIRM_VLANP                       0x00000002
 #define IXGBE_FDIRM_POOL                        0x00000004
-#define IXGBE_FDIRM_L3P                         0x00000008
-#define IXGBE_FDIRM_L4P                         0x00000010
-#define IXGBE_FDIRM_FLEX                        0x00000020
-#define IXGBE_FDIRM_DIPv6                       0x00000040
+#define IXGBE_FDIRM_L4P                         0x00000008
+#define IXGBE_FDIRM_FLEX                        0x00000010
+#define IXGBE_FDIRM_DIPv6                       0x00000020
 
 #define IXGBE_FDIRFREE_FREE_MASK                0xFFFF
 #define IXGBE_FDIRFREE_FREE_SHIFT               0
@@ -2215,12 +2214,13 @@ union ixgbe_atr_hash_dword {
 };
 
 struct ixgbe_atr_input_masks {
-       __be32 src_ip_mask;
-       __be32 dst_ip_mask;
+       __be16 rsvd0;
+       __be16 vlan_id_mask;
+       __be32 dst_ip_mask[4];
+       __be32 src_ip_mask[4];
        __be16 src_port_mask;
        __be16 dst_port_mask;
-       __be16 vlan_id_mask;
-       __be16 data_mask;
+       __be16 flex_mask;
 };
 
 enum ixgbe_eeprom_type {