[PATCH] i2c-i801: Cleanups

i2c-i801: Cleanups

Various cleanups to the i2c-i801 driver:
* Fix documentation file and self file name references.
* i801_setup can be marked __devinit.
* Drop useless error local variable and label in i801_setup.
* Avoid a double PCI configuration register write in some cases.
* Use symbolic names for SMBHSTCFG bits.
* Transmit the error code returned by i801_setup instead of forcing it
  to an arbitrary value.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index b651493375caafb64b106a689e5cca1f880d3c3c..b9e6fac8142d05cce7b015b5db71aacf22eb7fde 100644 (file)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1,5 +1,5 @@
 /*
-    i801.c - Part of lm_sensors, Linux kernel modules for hardware
+    i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
               monitoring
     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
     Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
@@ -36,7 +36,7 @@
     This driver supports several versions of Intel's I/O Controller Hubs (ICH).
     For SMBus support, they are similar to the PIIX4 and are part
     of Intel's '810' and other chipsets.
-    See the doc/busses/i2c-i801 file for details.
+    See the file Documentation/i2c/busses/i2c-i801 for details.
     I2C Block Read and Process Call are not supported.
 */
 
@@ -102,9 +102,8 @@ static struct pci_driver i801_driver;
 static struct pci_dev *I801_dev;
 static int isich4;
 
-static int i801_setup(struct pci_dev *dev)
+static int __devinit i801_setup(struct pci_dev *dev)
 {
-       int error_return = 0;
        unsigned char temp;
 
        I801_dev = dev;
@@ -115,7 +114,7 @@ static int i801_setup(struct pci_dev *dev)
        else
                isich4 = 0;
 
-       /* Determine the address of the SMBus areas */
+       /* Determine the address of the SMBus area */
        pci_read_config_word(I801_dev, SMBBA, &i801_smba);
        i801_smba &= 0xfff0;
        if (!i801_smba) {
@@ -127,20 +126,18 @@ static int i801_setup(struct pci_dev *dev)
        if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
                dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
                        i801_smba);
-               error_return = -EBUSY;
-               goto END;
+               return -EBUSY;
        }
 
        pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
        temp &= ~SMBHSTCFG_I2C_EN;      /* SMBus timing */
-       pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
-
-       if (!(temp & 1)) {
-               pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 1);
+       if (!(temp & SMBHSTCFG_HST_EN)) {
                dev_warn(&dev->dev, "enabling SMBus device\n");
+               temp |= SMBHSTCFG_HST_EN;
        }
+       pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
 
-       if (temp & 0x02)
+       if (temp & SMBHSTCFG_SMB_SMI_EN)
                dev_dbg(&dev->dev, "I801 using Interrupt SMI# for SMBus.\n");
        else
                dev_dbg(&dev->dev, "I801 using PCI Interrupt for SMBus.\n");
@@ -149,8 +146,7 @@ static int i801_setup(struct pci_dev *dev)
        dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
        dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba);
 
-END:
-       return error_return;
+       return 0;
 }
 
 static int i801_transaction(void)
@@ -516,12 +512,10 @@ MODULE_DEVICE_TABLE (pci, i801_ids);
 
 static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+       int err;
 
-       if (i801_setup(dev)) {
-               dev_warn(&dev->dev,
-                       "I801 not detected, module not inserted.\n");
-               return -ENODEV;
-       }
+       if ((err = i801_setup(dev)))
+               return err;
 
        /* set up the driverfs linkage to our parent device */
        i801_adapter.dev.parent = &dev->dev;