net: phy: add I2C mdio bus

Add an I2C MDIO bus bridge library, to allow phylib to access PHYs which
are connected to an I2C bus instead of the more conventional MDIO bus.
Such PHYs can be found in SFP adapters and SFF modules.

Since PHYs appear at I2C bus address 0x40..0x5f, and 0x50/0x51 are
reserved for SFP EEPROMs/diagnostics, we must not allow the MDIO bus
to access these I2C addresses.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 928fd892f167546e329f913ec10ea56e454cea0d..a1d6fdba8980f025989479715c88b8e1aa4f44ef 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -106,6 +106,16 @@ config MDIO_HISI_FEMAC
          This module provides a driver for the MDIO busses found in the
          Hisilicon SoC that have an Fast Ethernet MAC.
 
+config MDIO_I2C
+       tristate
+       depends on I2C
+       help
+         Support I2C based PHYs.  This provides a MDIO bus bridged
+         to I2C to allow PHYs connected in I2C mode to be accessed
+         using the existing infrastructure.
+
+         This is library mode.
+
 config MDIO_MOXART
         tristate "MOXA ART MDIO interface support"
         depends on ARCH_MOXART

diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 8e9b9f34938445f798ad8248eec6eaee3728dc8b..113e8d525c5e798b0735ab93c18f03fcc82e3db2 100644 (file)
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
 obj-$(CONFIG_MDIO_CAVIUM)      += mdio-cavium.o
 obj-$(CONFIG_MDIO_GPIO)                += mdio-gpio.o
 obj-$(CONFIG_MDIO_HISI_FEMAC)  += mdio-hisi-femac.o
+obj-$(CONFIG_MDIO_I2C)         += mdio-i2c.o
 obj-$(CONFIG_MDIO_MOXART)      += mdio-moxart.o
 obj-$(CONFIG_MDIO_OCTEON)      += mdio-octeon.o
 obj-$(CONFIG_MDIO_SUN4I)       += mdio-sun4i.o

diff --git a/drivers/net/phy/mdio-i2c.c b/drivers/net/phy/mdio-i2c.c
new file mode 100644 (file)
index 0000000..6d24fd1
--- /dev/null
+++ b/drivers/net/phy/mdio-i2c.c
@@ -0,0 +1,109 @@
+/*
+ * MDIO I2C bridge
+ *
+ * Copyright (C) 2015-2016 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Network PHYs can appear on I2C buses when they are part of SFP module.
+ * This driver exposes these PHYs to the networking PHY code, allowing
+ * our PHY drivers access to these PHYs, and so allowing configuration
+ * of their settings.
+ */
+#include <linux/i2c.h>
+#include <linux/phy.h>
+
+#include "mdio-i2c.h"
+
+/*
+ * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
+ * specified to be present in SFP modules.  These correspond with PHY
+ * addresses 16 and 17.  Disallow access to these "phy" addresses.
+ */
+static bool i2c_mii_valid_phy_id(int phy_id)
+{
+       return phy_id != 0x10 && phy_id != 0x11;
+}
+
+static unsigned int i2c_mii_phy_addr(int phy_id)
+{
+       return phy_id + 0x40;
+}
+
+static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
+{
+       struct i2c_adapter *i2c = bus->priv;
+       struct i2c_msg msgs[2];
+       u8 data[2], dev_addr = reg;
+       int bus_addr, ret;
+
+       if (!i2c_mii_valid_phy_id(phy_id))
+               return 0xffff;
+
+       bus_addr = i2c_mii_phy_addr(phy_id);
+       msgs[0].addr = bus_addr;
+       msgs[0].flags = 0;
+       msgs[0].len = 1;
+       msgs[0].buf = &dev_addr;
+       msgs[1].addr = bus_addr;
+       msgs[1].flags = I2C_M_RD;
+       msgs[1].len = sizeof(data);
+       msgs[1].buf = data;
+
+       ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
+       if (ret != ARRAY_SIZE(msgs))
+               return 0xffff;
+
+       return data[0] << 8 | data[1];
+}
+
+static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+       struct i2c_adapter *i2c = bus->priv;
+       struct i2c_msg msg;
+       int ret;
+       u8 data[3];
+
+       if (!i2c_mii_valid_phy_id(phy_id))
+               return 0;
+
+       data[0] = reg;
+       data[1] = val >> 8;
+       data[2] = val;
+
+       msg.addr = i2c_mii_phy_addr(phy_id);
+       msg.flags = 0;
+       msg.len = 3;
+       msg.buf = data;
+
+       ret = i2c_transfer(i2c, &msg, 1);
+
+       return ret < 0 ? ret : 0;
+}
+
+struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)
+{
+       struct mii_bus *mii;
+
+       if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
+               return ERR_PTR(-EINVAL);
+
+       mii = mdiobus_alloc();
+       if (!mii)
+               return ERR_PTR(-ENOMEM);
+
+       snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent));
+       mii->parent = parent;
+       mii->read = i2c_mii_read;
+       mii->write = i2c_mii_write;
+       mii->priv = i2c;
+
+       return mii;
+}
+EXPORT_SYMBOL_GPL(mdio_i2c_alloc);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("MDIO I2C bridge library");
+MODULE_LICENSE("GPL v2");

diff --git a/drivers/net/phy/mdio-i2c.h b/drivers/net/phy/mdio-i2c.h
new file mode 100644 (file)
index 0000000..889ab57
--- /dev/null
+++ b/drivers/net/phy/mdio-i2c.h
@@ -0,0 +1,19 @@
+/*
+ * MDIO I2C bridge
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MDIO_I2C_H
+#define MDIO_I2C_H
+
+struct device;
+struct i2c_adapter;
+struct mii_bus;
+
+struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c);
+
+#endif