rtc: omap: fix clock-source configuration
authorJohan Hovold <johan@kernel.org>
Wed, 10 Dec 2014 23:52:30 +0000 (15:52 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 11 Dec 2014 01:41:13 +0000 (17:41 -0800)
This series fixes a few issues with the omap rtc-driver, cleans up a
bit, adds device abstraction, and finally adds support for the PMIC
control feature found in some revisions of this RTC IP block.

Ultimately, this allows for powering off the Beaglebone and waking it up
again on RTC alarms.

This patch (of 20):

Make sure not to reset the clock-source configuration when enabling the
32kHz clock mux.

Until the clock source can be configured through device tree we must not
overwrite settings made by the bootloader (e.g.  clock-source
selection).

Fixes: cd914bba03d8 ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Tested-by: Felipe Balbi <balbi@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benot Cousson <bcousson@baylibre.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Keerthy J <j-keerthy@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/rtc-omap.c

index 21142e6574a9d6e8e61a80815dcc4f3d06d38638..f842c216f2dd54a52c406bf2d79951857b749635 100644 (file)
@@ -431,8 +431,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev)
        rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 
        /* enable RTC functional clock */
-       if (id_entry->driver_data & OMAP_RTC_HAS_32KCLK_EN)
-               rtc_writel(OMAP_RTC_OSC_32KCLK_EN, OMAP_RTC_OSC_REG);
+       if (id_entry->driver_data & OMAP_RTC_HAS_32KCLK_EN) {
+               reg = rtc_read(OMAP_RTC_OSC_REG);
+               rtc_writel(reg | OMAP_RTC_OSC_32KCLK_EN, OMAP_RTC_OSC_REG);
+       }
 
        /* clear old status */
        reg = rtc_read(OMAP_RTC_STATUS_REG);