Move the GE PIC drivers to allow these to be used by non-86xx boards.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
help
This option enables support for the GE SBC610.
-config GE_FPGA
- bool
- default n
-
endif
config MPC8641
obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o
obj-$(CONFIG_SBC8641D) += sbc8641d.o
obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o
-obj-$(CONFIG_GE_FPGA) += gef_pic.o
obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o
obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o
obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o
+++ /dev/null
-/*
- * Interrupt handling for GE FPGA based PIC
- *
- * Author: Martyn Welch <martyn.welch@ge.com>
- *
- * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/irq.h>
-
-#include "gef_pic.h"
-
-#define DEBUG
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
-#else
-#define DBG(fmt...) do { } while (0)
-#endif
-
-#define GEF_PIC_NUM_IRQS 32
-
-/* Interrupt Controller Interface Registers */
-#define GEF_PIC_INTR_STATUS 0x0000
-
-#define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu))
-#define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0)
-#define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1)
-
-#define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu))
-#define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
-#define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
-
-
-static DEFINE_RAW_SPINLOCK(gef_pic_lock);
-
-static void __iomem *gef_pic_irq_reg_base;
-static struct irq_host *gef_pic_irq_host;
-static int gef_pic_cascade_irq;
-
-/*
- * Interrupt Controller Handling
- *
- * The interrupt controller handles interrupts for most on board interrupts,
- * apart from PCI interrupts. For example on SBC610:
- *
- * 17:31 RO Reserved
- * 16 RO PCI Express Doorbell 3 Status
- * 15 RO PCI Express Doorbell 2 Status
- * 14 RO PCI Express Doorbell 1 Status
- * 13 RO PCI Express Doorbell 0 Status
- * 12 RO Real Time Clock Interrupt Status
- * 11 RO Temperature Interrupt Status
- * 10 RO Temperature Critical Interrupt Status
- * 9 RO Ethernet PHY1 Interrupt Status
- * 8 RO Ethernet PHY3 Interrupt Status
- * 7 RO PEX8548 Interrupt Status
- * 6 RO Reserved
- * 5 RO Watchdog 0 Interrupt Status
- * 4 RO Watchdog 1 Interrupt Status
- * 3 RO AXIS Message FIFO A Interrupt Status
- * 2 RO AXIS Message FIFO B Interrupt Status
- * 1 RO AXIS Message FIFO C Interrupt Status
- * 0 RO AXIS Message FIFO D Interrupt Status
- *
- * Interrupts can be forwarded to one of two output lines. Nothing
- * clever is done, so if the masks are incorrectly set, a single input
- * interrupt could generate interrupts on both output lines!
- *
- * The dual lines are there to allow the chained interrupts to be easily
- * passed into two different cores. We currently do not use this functionality
- * in this driver.
- *
- * Controller can also be configured to generate Machine checks (MCP), again on
- * two lines, to be attached to two different cores. It is suggested that these
- * should be masked out.
- */
-
-void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- unsigned int cascade_irq;
-
- /*
- * See if we actually have an interrupt, call generic handling code if
- * we do.
- */
- cascade_irq = gef_pic_get_irq();
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-static void gef_pic_mask(struct irq_data *d)
-{
- unsigned long flags;
- unsigned int hwirq = irqd_to_hwirq(d);
- u32 mask;
-
- raw_spin_lock_irqsave(&gef_pic_lock, flags);
- mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
- mask &= ~(1 << hwirq);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
- raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
-}
-
-static void gef_pic_mask_ack(struct irq_data *d)
-{
- /* Don't think we actually have to do anything to ack an interrupt,
- * we just need to clear down the devices interrupt and it will go away
- */
- gef_pic_mask(d);
-}
-
-static void gef_pic_unmask(struct irq_data *d)
-{
- unsigned long flags;
- unsigned int hwirq = irqd_to_hwirq(d);
- u32 mask;
-
- raw_spin_lock_irqsave(&gef_pic_lock, flags);
- mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
- mask |= (1 << hwirq);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
- raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
-}
-
-static struct irq_chip gef_pic_chip = {
- .name = "gefp",
- .irq_mask = gef_pic_mask,
- .irq_mask_ack = gef_pic_mask_ack,
- .irq_unmask = gef_pic_unmask,
-};
-
-
-/* When an interrupt is being configured, this call allows some flexibilty
- * in deciding which irq_chip structure is used
- */
-static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- /* All interrupts are LEVEL sensitive */
- irq_set_status_flags(virq, IRQ_LEVEL);
- irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
-
- return 0;
-}
-
-static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
- const u32 *intspec, unsigned int intsize,
- irq_hw_number_t *out_hwirq, unsigned int *out_flags)
-{
-
- *out_hwirq = intspec[0];
- if (intsize > 1)
- *out_flags = intspec[1];
- else
- *out_flags = IRQ_TYPE_LEVEL_HIGH;
-
- return 0;
-}
-
-static struct irq_host_ops gef_pic_host_ops = {
- .map = gef_pic_host_map,
- .xlate = gef_pic_host_xlate,
-};
-
-
-/*
- * Initialisation of PIC, this should be called in BSP
- */
-void __init gef_pic_init(struct device_node *np)
-{
- unsigned long flags;
-
- /* Map the devices registers into memory */
- gef_pic_irq_reg_base = of_iomap(np, 0);
-
- raw_spin_lock_irqsave(&gef_pic_lock, flags);
-
- /* Initialise everything as masked. */
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
-
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
- out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
-
- raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
-
- /* Map controller */
- gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
- if (gef_pic_cascade_irq == NO_IRQ) {
- printk(KERN_ERR "SBC610: failed to map cascade interrupt");
- return;
- }
-
- /* Setup an irq_host structure */
- gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- GEF_PIC_NUM_IRQS,
- &gef_pic_host_ops, NO_IRQ);
- if (gef_pic_irq_host == NULL)
- return;
-
- /* Chain with parent controller */
- irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
-}
-
-/*
- * This is called when we receive an interrupt with apparently comes from this
- * chip - check, returning the highest interrupt generated or return NO_IRQ
- */
-unsigned int gef_pic_get_irq(void)
-{
- u32 cause, mask, active;
- unsigned int virq = NO_IRQ;
- int hwirq;
-
- cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
-
- mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
-
- active = cause & mask;
-
- if (active) {
- for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
- if (active & (0x1 << hwirq))
- break;
- }
- virq = irq_linear_revmap(gef_pic_irq_host,
- (irq_hw_number_t)hwirq);
- }
-
- return virq;
-}
-
+++ /dev/null
-#ifndef __GEF_PIC_H__
-#define __GEF_PIC_H__
-
-#include <linux/init.h>
-
-void gef_pic_cascade(unsigned int, struct irq_desc *);
-unsigned int gef_pic_get_irq(void);
-void gef_pic_init(struct device_node *);
-
-#endif /* __GEF_PIC_H__ */
-
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
#include "mpc86xx.h"
-#include "gef_pic.h"
#undef DEBUG
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
#include "mpc86xx.h"
-#include "gef_pic.h"
#undef DEBUG
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
#include "mpc86xx.h"
-#include "gef_pic.h"
#undef DEBUG
bool "Expose SCOM controllers via debugfs"
depends on PPC_SCOM
default n
+
+config GE_FPGA
+ bool
+ default n
subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
obj-$(CONFIG_PPC_XICS) += xics/
+
+obj-$(CONFIG_GE_FPGA) += ge/
--- /dev/null
+obj-$(CONFIG_GE_FPGA) += ge_pic.o
--- /dev/null
+/*
+ * Interrupt handling for GE FPGA based PIC
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ *
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+
+#include "ge_pic.h"
+
+#define DEBUG
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
+#else
+#define DBG(fmt...) do { } while (0)
+#endif
+
+#define GEF_PIC_NUM_IRQS 32
+
+/* Interrupt Controller Interface Registers */
+#define GEF_PIC_INTR_STATUS 0x0000
+
+#define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu))
+#define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0)
+#define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1)
+
+#define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu))
+#define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
+#define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
+
+
+static DEFINE_RAW_SPINLOCK(gef_pic_lock);
+
+static void __iomem *gef_pic_irq_reg_base;
+static struct irq_host *gef_pic_irq_host;
+static int gef_pic_cascade_irq;
+
+/*
+ * Interrupt Controller Handling
+ *
+ * The interrupt controller handles interrupts for most on board interrupts,
+ * apart from PCI interrupts. For example on SBC610:
+ *
+ * 17:31 RO Reserved
+ * 16 RO PCI Express Doorbell 3 Status
+ * 15 RO PCI Express Doorbell 2 Status
+ * 14 RO PCI Express Doorbell 1 Status
+ * 13 RO PCI Express Doorbell 0 Status
+ * 12 RO Real Time Clock Interrupt Status
+ * 11 RO Temperature Interrupt Status
+ * 10 RO Temperature Critical Interrupt Status
+ * 9 RO Ethernet PHY1 Interrupt Status
+ * 8 RO Ethernet PHY3 Interrupt Status
+ * 7 RO PEX8548 Interrupt Status
+ * 6 RO Reserved
+ * 5 RO Watchdog 0 Interrupt Status
+ * 4 RO Watchdog 1 Interrupt Status
+ * 3 RO AXIS Message FIFO A Interrupt Status
+ * 2 RO AXIS Message FIFO B Interrupt Status
+ * 1 RO AXIS Message FIFO C Interrupt Status
+ * 0 RO AXIS Message FIFO D Interrupt Status
+ *
+ * Interrupts can be forwarded to one of two output lines. Nothing
+ * clever is done, so if the masks are incorrectly set, a single input
+ * interrupt could generate interrupts on both output lines!
+ *
+ * The dual lines are there to allow the chained interrupts to be easily
+ * passed into two different cores. We currently do not use this functionality
+ * in this driver.
+ *
+ * Controller can also be configured to generate Machine checks (MCP), again on
+ * two lines, to be attached to two different cores. It is suggested that these
+ * should be masked out.
+ */
+
+void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int cascade_irq;
+
+ /*
+ * See if we actually have an interrupt, call generic handling code if
+ * we do.
+ */
+ cascade_irq = gef_pic_get_irq();
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static void gef_pic_mask(struct irq_data *d)
+{
+ unsigned long flags;
+ unsigned int hwirq = irqd_to_hwirq(d);
+ u32 mask;
+
+ raw_spin_lock_irqsave(&gef_pic_lock, flags);
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+ mask &= ~(1 << hwirq);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+ raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static void gef_pic_mask_ack(struct irq_data *d)
+{
+ /* Don't think we actually have to do anything to ack an interrupt,
+ * we just need to clear down the devices interrupt and it will go away
+ */
+ gef_pic_mask(d);
+}
+
+static void gef_pic_unmask(struct irq_data *d)
+{
+ unsigned long flags;
+ unsigned int hwirq = irqd_to_hwirq(d);
+ u32 mask;
+
+ raw_spin_lock_irqsave(&gef_pic_lock, flags);
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+ mask |= (1 << hwirq);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+ raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
+}
+
+static struct irq_chip gef_pic_chip = {
+ .name = "gefp",
+ .irq_mask = gef_pic_mask,
+ .irq_mask_ack = gef_pic_mask_ack,
+ .irq_unmask = gef_pic_unmask,
+};
+
+
+/* When an interrupt is being configured, this call allows some flexibilty
+ * in deciding which irq_chip structure is used
+ */
+static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ /* All interrupts are LEVEL sensitive */
+ irq_set_status_flags(virq, IRQ_LEVEL);
+ irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
+
+ return 0;
+}
+
+static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1)
+ *out_flags = intspec[1];
+ else
+ *out_flags = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
+static struct irq_host_ops gef_pic_host_ops = {
+ .map = gef_pic_host_map,
+ .xlate = gef_pic_host_xlate,
+};
+
+
+/*
+ * Initialisation of PIC, this should be called in BSP
+ */
+void __init gef_pic_init(struct device_node *np)
+{
+ unsigned long flags;
+
+ /* Map the devices registers into memory */
+ gef_pic_irq_reg_base = of_iomap(np, 0);
+
+ raw_spin_lock_irqsave(&gef_pic_lock, flags);
+
+ /* Initialise everything as masked. */
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
+
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
+
+ raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
+
+ /* Map controller */
+ gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
+ if (gef_pic_cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "SBC610: failed to map cascade interrupt");
+ return;
+ }
+
+ /* Setup an irq_host structure */
+ gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
+ GEF_PIC_NUM_IRQS,
+ &gef_pic_host_ops, NO_IRQ);
+ if (gef_pic_irq_host == NULL)
+ return;
+
+ /* Chain with parent controller */
+ irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
+}
+
+/*
+ * This is called when we receive an interrupt with apparently comes from this
+ * chip - check, returning the highest interrupt generated or return NO_IRQ
+ */
+unsigned int gef_pic_get_irq(void)
+{
+ u32 cause, mask, active;
+ unsigned int virq = NO_IRQ;
+ int hwirq;
+
+ cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
+
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+
+ active = cause & mask;
+
+ if (active) {
+ for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
+ if (active & (0x1 << hwirq))
+ break;
+ }
+ virq = irq_linear_revmap(gef_pic_irq_host,
+ (irq_hw_number_t)hwirq);
+ }
+
+ return virq;
+}
+
--- /dev/null
+#ifndef __GEF_PIC_H__
+#define __GEF_PIC_H__
+
+#include <linux/init.h>
+
+void gef_pic_cascade(unsigned int, struct irq_desc *);
+unsigned int gef_pic_get_irq(void);
+void gef_pic_init(struct device_node *);
+
+#endif /* __GEF_PIC_H__ */
+
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff