dts: add ESDHC weird voltage bits workaround
authorRoy Zang <tie-fei.zang@freescale.com>
Wed, 11 Aug 2010 01:02:01 +0000 (18:02 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 11 Aug 2010 15:59:05 +0000 (08:59 -0700)
P4080 ESDHC controller does not support 1.8V and 3.0V voltage.  but the
host controller capabilities register wrongly set the bits.  This patch
adds the workaround to correct the weird voltage setting bits.  Only 3.3V
voltage is supported for P4080 ESDHC controller.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/powerpc/boot/dts/p4080ds.dts

index efa00911f12be6b45bf61123311513db397b4845..2f0de24e3822577631169c765f8ac17510144b70 100644 (file)
                        reg = <0x114000 0x1000>;
                        interrupts = <48 2>;
                        interrupt-parent = <&mpic>;
+                       voltage-ranges = <3300 3300>;
                        sdhci,auto-cmd12;
                };