powerpc/mpic: Properly set default triggers
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Thu, 19 Apr 2012 17:30:57 +0000 (17:30 +0000)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Mon, 23 Apr 2012 01:04:30 +0000 (11:04 +1000)
This gets rid of the unused default senses array, and replaces the
incorrect use of IRQ_TYPE_NONE with the new IRQ_TYPE_DEFAULT for
the initial set_trigger() call when mapping an interrupt.

This in turn makes us read the HW state and update the irq desc
accordingly.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/include/asm/mpic.h
arch/powerpc/sysdev/mpic.c

index c65b9294376ee8e2e1745cf73b014dc1f49d372e..c9f698a994be246860ee6cfdd6895d27d68cea7b 100644 (file)
@@ -275,9 +275,6 @@ struct mpic
        unsigned int            isu_mask;
        /* Number of sources */
        unsigned int            num_sources;
-       /* default senses array */
-       unsigned char           *senses;
-       unsigned int            senses_count;
 
        /* vector numbers used for internal sources (ipi/timers) */
        unsigned int            ipi_vecs[4];
@@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node,
 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
                            phys_addr_t phys_addr);
 
-/* Set default sense codes
- *
- * @mpic:      controller
- * @senses:    array of sense codes
- * @count:     size of above array
- *
- * Optionally provide an array (indexed on hardware interrupt numbers
- * for this MPIC) of default sense codes for the chip. Those are linux
- * sense codes IRQ_TYPE_*
- *
- * The driver gets ownership of the pointer, don't dispose of it or
- * anything like that. __init only.
- */
-extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
-
 
 /* Initialize the controller. After this has been called, none of the above
  * should be called again for this mpic
index 665b0f806786afa5647f648f19100ee66cb65eac..395af1347749104aeef3c832fb48dd26e6385ace 100644 (file)
@@ -872,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
        if (src >= mpic->num_sources)
                return -EINVAL;
 
+       vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
+
+       /* We don't support "none" type */
        if (flow_type == IRQ_TYPE_NONE)
-               if (mpic->senses && src < mpic->senses_count)
-                       flow_type = mpic->senses[src];
-       if (flow_type == IRQ_TYPE_NONE)
-               flow_type = IRQ_TYPE_LEVEL_LOW;
+               flow_type = IRQ_TYPE_DEFAULT;
+
+       /* Default: read HW settings */
+       if (flow_type == IRQ_TYPE_DEFAULT) {
+               switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
+                              MPIC_INFO(VECPRI_SENSE_MASK))) {
+                       case MPIC_INFO(VECPRI_SENSE_EDGE) |
+                            MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+                               flow_type = IRQ_TYPE_EDGE_RISING;
+                               break;
+                       case MPIC_INFO(VECPRI_SENSE_EDGE) |
+                            MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+                               flow_type = IRQ_TYPE_EDGE_FALLING;
+                               break;
+                       case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+                            MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+                               flow_type = IRQ_TYPE_LEVEL_HIGH;
+                               break;
+                       case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+                            MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+                               flow_type = IRQ_TYPE_LEVEL_LOW;
+                               break;
+               }
+       }
 
+       /* Apply to irq desc */
        irqd_set_trigger_type(d, flow_type);
 
+       /* Apply to HW */
        if (mpic_is_ht_interrupt(mpic, src))
                vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
                        MPIC_VECPRI_SENSE_EDGE;
        else
                vecpri = mpic_type_to_vecpri(mpic, flow_type);
 
-       vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
        vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) |
                        MPIC_INFO(VECPRI_SENSE_MASK));
        vnew |= vecpri;
@@ -1022,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
        irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq);
 
        /* Set default irq type */
-       irq_set_irq_type(virq, IRQ_TYPE_NONE);
+       irq_set_irq_type(virq, IRQ_TYPE_DEFAULT);
 
        /* If the MPIC was reset, then all vectors have already been
         * initialized.  Otherwise, a per source lazy initialization
@@ -1413,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
                mpic->num_sources = isu_first + mpic->isu_size;
 }
 
-void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
-{
-       mpic->senses = senses;
-       mpic->senses_count = count;
-}
-
 void __init mpic_init(struct mpic *mpic)
 {
        int i, cpu;