igb: Add i2c interface to igb.
authorCarolyn Wyborny <carolyn.wyborny@intel.com>
Fri, 7 Dec 2012 03:00:30 +0000 (03:00 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Fri, 18 Jan 2013 12:55:21 +0000 (04:55 -0800)
Some of our adapters have sensors on them accessible via i2c and a private
interface.  This patch implements the kernel interface for i2c to those sensors.
Subsequent patches will provide functions to export that data.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/Kconfig
drivers/net/ethernet/intel/igb/e1000_82575.c
drivers/net/ethernet/intel/igb/e1000_82575.h
drivers/net/ethernet/intel/igb/e1000_defines.h
drivers/net/ethernet/intel/igb/e1000_hw.h
drivers/net/ethernet/intel/igb/e1000_regs.h
drivers/net/ethernet/intel/igb/igb.h
drivers/net/ethernet/intel/igb/igb_main.c

index bde4f3db328fddfef3290fb39c6d66dd85c6cba6..e8912f1b84421a68f5c0d17c9d1f50ca4f76e791 100644 (file)
@@ -94,6 +94,8 @@ config IGB
        tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
        depends on PCI
        select PTP_1588_CLOCK
+       select I2C
+       select I2C_ALGOBIT
        ---help---
          This driver supports Intel(R) 82575/82576 gigabit ethernet family of
          adapters.  For more information on how to identify your adapter, go
index fdaaf2709d0ae660480e3c6525e116481a369c4c..51e3f4f9b530da8213e6d993ada1bd20852760d4 100644 (file)
@@ -33,6 +33,7 @@
 
 #include <linux/types.h>
 #include <linux/if_ether.h>
+#include <linux/i2c.h>
 
 #include "e1000_mac.h"
 #include "e1000_82575.h"
@@ -2314,6 +2315,8 @@ static struct e1000_phy_operations e1000_phy_ops_82575 = {
        .acquire              = igb_acquire_phy_82575,
        .get_cfg_done         = igb_get_cfg_done_82575,
        .release              = igb_release_phy_82575,
+       .write_i2c_byte       = igb_write_i2c_byte,
+       .read_i2c_byte        = igb_read_i2c_byte,
 };
 
 static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
index 44b76b3b6816692f2bcea6682950791a92164bda..67bd9f93c3cc9ae06bdf97112ff04ae40c74e9cc 100644 (file)
@@ -32,6 +32,10 @@ extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
 extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+extern s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+                               u8 dev_addr, u8 *data);
+extern s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+                                u8 dev_addr, u8 data);
 
 #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
                                      (ID_LED_DEF1_DEF2 <<  8) | \
@@ -261,4 +265,6 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
 u16 igb_rxpbs_adjust_82580(u32 data);
 s32 igb_set_eee_i350(struct e1000_hw *);
 
+#define E1000_I2C_THERMAL_SENSOR_ADDR  0xF8
+
 #endif
index 45dce06eff264d77dd5d6b350ef2e3a1dd94447f..446678ec9fe6ae6fc64058ee88477d3a69ec4ee4 100644 (file)
 #define E1000_ERR_NO_SPACE          17
 #define E1000_ERR_NVM_PBA_SECTION   18
 #define E1000_ERR_INVM_VALUE_NOT_FOUND 19
+#define E1000_ERR_I2C               20
 
 /* Loop limit on how long we wait for auto-negotiation to complete */
 #define COPPER_LINK_UP_LIMIT              10
index c2a51dcda550107e2b266dff9e1ba2f9b1cc83be..75312ba10d563d50d68e82c820365d940007d3de 100644 (file)
@@ -342,6 +342,8 @@ struct e1000_phy_operations {
        s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
        s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
        s32  (*write_reg)(struct e1000_hw *, u32, u16);
+       s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
+       s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
 };
 
 struct e1000_nvm_operations {
index e5db48594e8a929daab778dca1fe7c9b92f0e7fa..31c3e2f4f58c366b0c7583c4929dd1c6704b5b36 100644 (file)
 #define E1000_FCRTL    0x02160  /* Flow Control Receive Threshold Low - RW */
 #define E1000_FCRTH    0x02168  /* Flow Control Receive Threshold High - RW */
 #define E1000_FCRTV    0x02460  /* Flow Control Refresh Timer Value - RW */
+#define E1000_I2CPARAMS        0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_I2CBB_EN      0x00000100  /* I2C - Bit Bang Enable */
+#define E1000_I2C_CLK_OUT   0x00000200  /* I2C- Clock */
+#define E1000_I2C_DATA_OUT  0x00000400  /* I2C- Data Out */
+#define E1000_I2C_DATA_OE_N 0x00000800  /* I2C- Data Output Enable */
+#define E1000_I2C_DATA_IN   0x00001000  /* I2C- Data In */
+#define E1000_I2C_CLK_OE_N  0x00002000  /* I2C- Clock Output Enable */
+#define E1000_I2C_CLK_IN    0x00004000  /* I2C- Clock In */
 
 /* IEEE 1588 TIMESYNCH */
 #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
index 17f1686ee411fe3e63aea5fdcfacaa1abe6e8ee1..9f1af1b232d55372ac88171181a8c43853621547 100644 (file)
@@ -39,6 +39,8 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/bitops.h>
 #include <linux/if_vlan.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
 
 struct igb_adapter;
 
@@ -301,6 +303,11 @@ static inline int igb_desc_unused(struct igb_ring *ring)
        return ring->count + ring->next_to_clean - ring->next_to_use - 1;
 }
 
+struct igb_i2c_client_list {
+       struct i2c_client *client;
+       struct igb_i2c_client_list *next;
+};
+
 /* board specific private data structure */
 struct igb_adapter {
        unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
@@ -391,6 +398,9 @@ struct igb_adapter {
        struct timecounter tc;
 
        char fw_version[32];
+       struct i2c_algo_bit_data i2c_algo;
+       struct i2c_adapter i2c_adap;
+       struct igb_i2c_client_list *i2c_clients;
 };
 
 #define IGB_FLAG_HAS_MSI               (1 << 0)
@@ -466,7 +476,6 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector,
 
 extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
                                  struct ifreq *ifr, int cmd);
-
 static inline s32 igb_reset_phy(struct e1000_hw *hw)
 {
        if (hw->phy.ops.reset)
index 342bbd661d3b0d2f55e0de3f91b721fa9bb4b33e..0173b61184240452009243ac328bcce958f975ba 100644 (file)
@@ -57,6 +57,7 @@
 #ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif
+#include <linux/i2c.h>
 #include "igb.h"
 
 #define MAJ 4
@@ -567,6 +568,91 @@ exit:
        return;
 }
 
+/*  igb_get_i2c_data - Reads the I2C SDA data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Returns the I2C data bit value
+ */
+static int igb_get_i2c_data(void *data)
+{
+       struct igb_adapter *adapter = (struct igb_adapter *)data;
+       struct e1000_hw *hw = &adapter->hw;
+       s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+       return ((i2cctl & E1000_I2C_DATA_IN) != 0);
+}
+
+/* igb_set_i2c_data - Sets the I2C data bit
+ *  @data: pointer to hardware structure
+ *  @state: I2C data value (0 or 1) to set
+ *
+ *  Sets the I2C data bit
+ */
+static void igb_set_i2c_data(void *data, int state)
+{
+       struct igb_adapter *adapter = (struct igb_adapter *)data;
+       struct e1000_hw *hw = &adapter->hw;
+       s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+       if (state)
+               i2cctl |= E1000_I2C_DATA_OUT;
+       else
+               i2cctl &= ~E1000_I2C_DATA_OUT;
+
+       i2cctl &= ~E1000_I2C_DATA_OE_N;
+       i2cctl |= E1000_I2C_CLK_OE_N;
+       wr32(E1000_I2CPARAMS, i2cctl);
+       wrfl();
+
+}
+
+/* igb_set_i2c_clk - Sets the I2C SCL clock
+ *  @data: pointer to hardware structure
+ *  @state: state to set clock
+ *
+ *  Sets the I2C clock line to state
+ */
+static void igb_set_i2c_clk(void *data, int state)
+{
+       struct igb_adapter *adapter = (struct igb_adapter *)data;
+       struct e1000_hw *hw = &adapter->hw;
+       s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+       if (state) {
+               i2cctl |= E1000_I2C_CLK_OUT;
+               i2cctl &= ~E1000_I2C_CLK_OE_N;
+       } else {
+               i2cctl &= ~E1000_I2C_CLK_OUT;
+               i2cctl &= ~E1000_I2C_CLK_OE_N;
+       }
+       wr32(E1000_I2CPARAMS, i2cctl);
+       wrfl();
+}
+
+/* igb_get_i2c_clk - Gets the I2C SCL clock state
+ *  @data: pointer to hardware structure
+ *
+ *  Gets the I2C clock state
+ */
+static int igb_get_i2c_clk(void *data)
+{
+       struct igb_adapter *adapter = (struct igb_adapter *)data;
+       struct e1000_hw *hw = &adapter->hw;
+       s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+       return ((i2cctl & E1000_I2C_CLK_IN) != 0);
+}
+
+static const struct i2c_algo_bit_data igb_i2c_algo = {
+       .setsda         = igb_set_i2c_data,
+       .setscl         = igb_set_i2c_clk,
+       .getsda         = igb_get_i2c_data,
+       .getscl         = igb_get_i2c_clk,
+       .udelay         = 5,
+       .timeout        = 20,
+};
+
 /**
  * igb_get_hw_dev - return device
  * used by hardware layer to print debugging information
@@ -1824,6 +1910,37 @@ void igb_set_fw_version(struct igb_adapter *adapter)
        return;
 }
 
+static const struct i2c_board_info i350_sensor_info = {
+       I2C_BOARD_INFO("i350bb", 0Xf8),
+};
+
+/*  igb_init_i2c - Init I2C interface
+ *  @adapter: pointer to adapter structure
+ *
+ */
+static s32 igb_init_i2c(struct igb_adapter *adapter)
+{
+       s32 status = E1000_SUCCESS;
+
+       /* I2C interface supported on i350 devices */
+       if (adapter->hw.mac.type != e1000_i350)
+               return E1000_SUCCESS;
+
+       /* Initialize the i2c bus which is controlled by the registers.
+        * This bus will use the i2c_algo_bit structue that implements
+        * the protocol through toggling of the 4 bits in the register.
+        */
+       adapter->i2c_adap.owner = THIS_MODULE;
+       adapter->i2c_algo = igb_i2c_algo;
+       adapter->i2c_algo.data = adapter;
+       adapter->i2c_adap.algo_data = &adapter->i2c_algo;
+       adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
+       strlcpy(adapter->i2c_adap.name, "igb BB",
+               sizeof(adapter->i2c_adap.name));
+       status = i2c_bit_add_bus(&adapter->i2c_adap);
+       return status;
+}
+
 /**
  * igb_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -2116,6 +2233,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
        /* reset the hardware with the new settings */
        igb_reset(adapter);
 
+       /* Init the I2C interface */
+       err = igb_init_i2c(adapter);
+       if (err) {
+               dev_err(&pdev->dev, "failed to init i2c interface\n");
+               goto err_eeprom;
+       }
+
        /* let the f/w know that the h/w is now under the control of the
         * driver. */
        igb_get_hw_control(adapter);
@@ -2177,6 +2301,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 err_register:
        igb_release_hw_control(adapter);
+       memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
 err_eeprom:
        if (!igb_check_reset_block(hw))
                igb_reset_phy(hw);
@@ -2290,6 +2415,18 @@ out:
 }
 
 #endif
+/*
+ *  igb_remove_i2c - Cleanup  I2C interface
+ *  @adapter: pointer to adapter structure
+ *
+ */
+static void igb_remove_i2c(struct igb_adapter *adapter)
+{
+
+       /* free the adapter bus structure */
+       i2c_del_adapter(&adapter->i2c_adap);
+}
+
 /**
  * igb_remove - Device Removal Routine
  * @pdev: PCI device information struct
@@ -2306,6 +2443,8 @@ static void igb_remove(struct pci_dev *pdev)
        struct e1000_hw *hw = &adapter->hw;
 
        pm_runtime_get_noresume(&pdev->dev);
+       igb_remove_i2c(adapter);
+
        igb_ptp_stop(adapter);
 
        /*
@@ -7425,4 +7564,134 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
        }
 }
 
+static DEFINE_SPINLOCK(i2c_clients_lock);
+
+/*  igb_get_i2c_client - returns matching client
+ *  in adapters's client list.
+ *  @adapter: adapter struct
+ *  @dev_addr: device address of i2c needed.
+ */
+struct i2c_client *
+igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
+{
+       ulong flags;
+       struct igb_i2c_client_list *client_list;
+       struct i2c_client *client = NULL;
+       struct i2c_board_info client_info = {
+               I2C_BOARD_INFO("igb", 0x00),
+       };
+
+       spin_lock_irqsave(&i2c_clients_lock, flags);
+       client_list = adapter->i2c_clients;
+
+       /* See if we already have an i2c_client */
+       while (client_list) {
+               if (client_list->client->addr == (dev_addr >> 1)) {
+                       client = client_list->client;
+                       goto exit;
+               } else {
+                       client_list = client_list->next;
+               }
+       }
+
+       /* no client_list found, create a new one */
+       client_list = kzalloc(sizeof(*client_list), GFP_KERNEL);
+       if (client_list == NULL)
+               goto exit;
+
+       /* dev_addr passed to us is left-shifted by 1 bit
+        * i2c_new_device call expects it to be flush to the right.
+        */
+       client_info.addr = dev_addr >> 1;
+       client_info.platform_data = adapter;
+       client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
+       if (client_list->client == NULL) {
+               dev_info(&adapter->pdev->dev, "Failed to create new i2c device..\n");
+               goto err_no_client;
+       }
+
+       /* insert new client at head of list */
+       client_list->next = adapter->i2c_clients;
+       adapter->i2c_clients = client_list;
+
+       spin_unlock_irqrestore(&i2c_clients_lock, flags);
+
+       client = client_list->client;
+       goto exit;
+
+err_no_client:
+       kfree(client_list);
+exit:
+       spin_unlock_irqrestore(&i2c_clients_lock, flags);
+       return client;
+}
+
+/*  igb_read_i2c_byte - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @dev_addr: device address
+ *  @data: value read
+ *
+ *  Performs byte read operation over I2C interface at
+ *  a specified device address.
+ */
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+                               u8 dev_addr, u8 *data)
+{
+       struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+       struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+       s32 status;
+       u16 swfw_mask = 0;
+
+       if (!this_client)
+               return E1000_ERR_I2C;
+
+       swfw_mask = E1000_SWFW_PHY0_SM;
+
+       if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
+           != E1000_SUCCESS)
+               return E1000_ERR_SWFW_SYNC;
+
+       status = i2c_smbus_read_byte_data(this_client, byte_offset);
+       hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+       if (status < 0)
+               return E1000_ERR_I2C;
+       else {
+               *data = status;
+               return E1000_SUCCESS;
+       }
+}
+
+/*  igb_write_i2c_byte - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: value to write
+ *
+ *  Performs byte write operation over I2C interface at
+ *  a specified device address.
+ */
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+                                u8 dev_addr, u8 data)
+{
+       struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+       struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+       s32 status;
+       u16 swfw_mask = E1000_SWFW_PHY0_SM;
+
+       if (!this_client)
+               return E1000_ERR_I2C;
+
+       if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS)
+               return E1000_ERR_SWFW_SYNC;
+       status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
+       hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+       if (status)
+               return E1000_ERR_I2C;
+       else
+               return E1000_SUCCESS;
+
+}
 /* igb_main.c */