[ Upstream commit
07f1a6850c5d5a65c917c3165692b5179ac4cb6b ]
When run test case:
mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
mdadm -S /dev/md1
mdadm -A /dev/md1 /dev/sd[b-c] --run --force
mdadm --zero /dev/sda
mdadm /dev/md1 -a /dev/sda
echo offline > /sys/block/sdc/device/state
echo offline > /sys/block/sdb/device/state
sleep 5
mdadm -S /dev/md1
echo running > /sys/block/sdb/device/state
echo running > /sys/block/sdc/device/state
mdadm -A /dev/md1 /dev/sd[a-c] --run --force
mdadm run fail with kernel message as follow:
[ 172.986064] md: kicking non-fresh sdb from array!
[ 173.004210] md: kicking non-fresh sdc from array!
[ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[ 173.022406] md1: failed to create bitmap (-5)
In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
!test_bit(In_sync, &conf->mirrors[i].rdev->flags) ||
test_bit(Faulty, &conf->mirrors[i].rdev->flags))
mddev->degraded++;
+ /*
+ * RAID1 needs at least one disk in active
+ */
+ if (conf->raid_disks - mddev->degraded < 1) {
+ ret = -EINVAL;
+ goto abort;
+ }
if (conf->raid_disks - mddev->degraded == 1)
mddev->recovery_cp = MaxSector;
ret = md_integrity_register(mddev);
if (ret) {
md_unregister_thread(&mddev->thread);
- raid1_free(mddev, conf);
+ goto abort;
}
+ return 0;
+
+abort:
+ raid1_free(mddev, conf);
return ret;
}