tty-usb-safe-serial: Coding style
authorAlan Cox <alan@redhat.com>
Tue, 22 Jul 2008 10:15:26 +0000 (11:15 +0100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 22 Jul 2008 20:03:26 +0000 (13:03 -0700)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/usb/serial/safe_serial.c

index f823e4dcea1e006acf53810a5c960418f3aa7992..def52d07a4ea34f817c03b60ecc827655fd05d3a 100644 (file)
  *      Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com>
  */
 
-/* 
- * The encapsultaion is designed to overcome difficulties with some USB hardware.
+/*
+ * The encapsultaion is designed to overcome difficulties with some USB
+ * hardware.
  *
  * While the USB protocol has a CRC over the data while in transit, i.e. while
- * being carried over the bus, there is no end to end protection. If the hardware
- * has any problems getting the data into or out of the USB transmit and receive
- * FIFO's then data can be lost. 
+ * being carried over the bus, there is no end to end protection. If the
+ * hardware has any problems getting the data into or out of the USB transmit
+ * and receive FIFO's then data can be lost.
  *
- * This protocol adds a two byte trailer to each USB packet to specify the number
- * of bytes of valid data and a 10 bit CRC that will allow the receiver to verify
- * that the entire USB packet was received without error.
+ * This protocol adds a two byte trailer to each USB packet to specify the
+ * number of bytes of valid data and a 10 bit CRC that will allow the receiver
+ * to verify that the entire USB packet was received without error.
  *
- * Because in this case the sender and receiver are the class and function drivers
- * there is now end to end protection.
+ * Because in this case the sender and receiver are the class and function
+ * drivers there is now end to end protection.
  *
- * There is an additional option that can be used to force all transmitted packets
- * to be padded to the maximum packet size. This provides a work around for some
- * devices which have problems with small USB packets.
+ * There is an additional option that can be used to force all transmitted
+ * packets to be padded to the maximum packet size. This provides a work
+ * around for some devices which have problems with small USB packets.
  *
  * Assuming a packetsize of N:
  *
  *      | Data Length       | 10 bit CRC                                |
  *      + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 +
  *
- * The 10 bit CRC is computed across the sent data, followed by the trailer with
- * the length set and the CRC set to zero. The CRC is then OR'd into the trailer.
+ * The 10 bit CRC is computed across the sent data, followed by the trailer
+ * with the length set and the CRC set to zero. The CRC is then OR'd into
+ * the trailer.
  *
- * When received a 10 bit CRC is computed over the entire frame including the trailer
- * and should be equal to zero.
+ * When received a 10 bit CRC is computed over the entire frame including
+ * the trailer and should be equal to zero.
  *
  * Two module parameters are used to control the encapsulation, if both are
  * turned of the module works as a simple serial device with NO
@@ -69,7 +71,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -86,12 +88,12 @@ static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
 #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
 #define DRIVER_DESC "USB Safe Encapsulated Serial"
 
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-static __u16 vendor;           // no default
-static __u16 product;          // no default
+static __u16 vendor;           /* no default */
+static __u16 product;          /* no default */
 module_param(vendor, ushort, 0);
 MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)");
 module_param(product, ushort, 0);
@@ -122,30 +124,31 @@ MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off");
 #define LINEO_SAFESERIAL_CRC_PADDED             0x02
 
 
-#define MY_USB_DEVICE(vend,prod,dc,ic,isc) \
-        .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS | \
-                USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
-        .idVendor = (vend), \
-        .idProduct = (prod),\
-        .bDeviceClass = (dc),\
-        .bInterfaceClass = (ic), \
-        .bInterfaceSubClass = (isc),
+#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \
+       .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+                      USB_DEVICE_ID_MATCH_DEV_CLASS | \
+                      USB_DEVICE_ID_MATCH_INT_CLASS | \
+                      USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
+       .idVendor = (vend), \
+       .idProduct = (prod),\
+       .bDeviceClass = (dc),\
+       .bInterfaceClass = (ic), \
+       .bInterfaceSubClass = (isc),
 
 static struct usb_device_id id_table[] = {
-       {MY_USB_DEVICE (0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Itsy
-       {MY_USB_DEVICE (0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Calypso
-       {MY_USB_DEVICE (0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Iris 
-       {MY_USB_DEVICE (0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Collie 
-       {MY_USB_DEVICE (0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Collie 
-       {MY_USB_DEVICE (0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Collie 
-       {MY_USB_DEVICE (0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},  // Sharp tmp
-       // extra null entry for module 
-       // vendor/produc parameters
-       {MY_USB_DEVICE (0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
-       {}                      // terminating entry 
+       {MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},   /* Itsy */
+       {MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},   /* Calypso */
+       {MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},   /* Iris */
+       {MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},   /* Collie */
+       {MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},   /* Collie */
+       {MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},   /* Collie */
+       {MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},   /* Sharp tmp */
+       /* extra null entry for module vendor/produc parameters */
+       {MY_USB_DEVICE(0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
+       {}                      /* terminating entry  */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver safe_driver = {
        .name =         "safe_serial",
@@ -156,29 +159,45 @@ static struct usb_driver safe_driver = {
 };
 
 static const __u16 crc10_table[256] = {
-       0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
-       0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
-       0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
-       0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac, 0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
-       0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b, 0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
-       0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a, 0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
-       0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259, 0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
-       0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268, 0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
-       0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377, 0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
-       0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346, 0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
-       0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315, 0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
-       0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324, 0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
-       0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3, 0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
-       0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382, 0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
-       0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1, 0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
-       0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0, 0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
+       0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff,
+       0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
+       0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce,
+       0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf,
+       0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d,
+       0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c,
+       0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac,
+       0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad,
+       0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b,
+       0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a,
+       0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a,
+       0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b,
+       0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259,
+       0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158,
+       0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268,
+       0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169,
+       0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377,
+       0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076,
+       0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346,
+       0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047,
+       0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315,
+       0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014,
+       0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324,
+       0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025,
+       0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3,
+       0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2,
+       0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382,
+       0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083,
+       0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1,
+       0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0,
+       0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0,
+       0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1,
 };
 
-#define CRC10_INITFCS     0x000        // Initial FCS value
-#define CRC10_GOODFCS     0x000        // Good final FCS value
-#define CRC10_FCS(fcs, c) ( (((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
+#define CRC10_INITFCS     0x000        /* Initial FCS value */
+#define CRC10_GOODFCS     0x000        /* Good final FCS value */
+#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c))
 
-/**     
+/**
  * fcs_compute10 - memcpy and calculate 10 bit CRC across buffer
  * @sp: pointer to buffer
  * @len: number of bytes
@@ -187,13 +206,13 @@ static const __u16 crc10_table[256] = {
  * Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return
  * new 10 bit FCS.
  */
-static __u16 __inline__ fcs_compute10 (unsigned char *sp, int len, __u16 fcs)
+static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs)
 {
-       for (; len-- > 0; fcs = CRC10_FCS (fcs, *sp++));
+       for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++));
        return fcs;
 }
 
-static void safe_read_bulk_callback (struct urb *urb)
+static void safe_read_bulk_callback(struct urb *urb)
 {
        struct usb_serial_port *port =  urb->context;
        unsigned char *data = urb->transfer_buffer;
@@ -201,7 +220,7 @@ static void safe_read_bulk_callback (struct urb *urb)
        int result;
        int status = urb->status;
 
-       dbg ("%s", __func__);
+       dbg("%s", __func__);
 
        if (status) {
                dbg("%s - nonzero read bulk status received: %d",
@@ -209,50 +228,55 @@ static void safe_read_bulk_callback (struct urb *urb)
                return;
        }
 
-       dbg ("safe_read_bulk_callback length: %d", port->read_urb->actual_length);
+       dbg("safe_read_bulk_callback length: %d",
+                                       port->read_urb->actual_length);
 #ifdef ECHO_RCV
        {
                int i;
                unsigned char *cp = port->read_urb->transfer_buffer;
                for (i = 0; i < port->read_urb->actual_length; i++) {
-                       if ((i % 32) == 0) {
-                               printk ("\nru[%02x] ", i);
-                       }
-                       printk ("%02x ", *cp++);
+                       if ((i % 32) == 0)
+                               printk("\nru[%02x] ", i);
+                       printk("%02x ", *cp++);
                }
-               printk ("\n");
+               printk("\n");
        }
 #endif
        if (safe) {
                __u16 fcs;
-               if (!(fcs = fcs_compute10 (data, length, CRC10_INITFCS))) {
+               fcs = fcs_compute10(data, length, CRC10_INITFCS);
+               if (!fcs) {
                        int actual_length = data[length - 2] >> 2;
                        if (actual_length <= (length - 2)) {
-                               info ("%s - actual: %d", __func__, actual_length);
-                               tty_insert_flip_string(port->port.tty, data, actual_length);
-                               tty_flip_buffer_push (port->port.tty);
+                               info("%s - actual: %d", __func__,
+                                                       actual_length);
+                               tty_insert_flip_string(port->port.tty,
+                                                       data, actual_length);
+                               tty_flip_buffer_push(port->port.tty);
                        } else {
-                               err ("%s - inconsistent lengths %d:%d", __func__,
-                                    actual_length, length);
+                               err("%s - inconsistent lengths %d:%d",
+                                       __func__, actual_length, length);
                        }
                } else {
-                       err ("%s - bad CRC %x", __func__, fcs);
+                       err("%s - bad CRC %x", __func__, fcs);
                }
        } else {
                tty_insert_flip_string(port->port.tty, data, length);
-               tty_flip_buffer_push (port->port.tty);
+               tty_flip_buffer_push(port->port.tty);
        }
 
        /* Continue trying to always read  */
-       usb_fill_bulk_urb (urb, port->serial->dev,
-                      usb_rcvbulkpipe (port->serial->dev, port->bulk_in_endpointAddress),
-                      urb->transfer_buffer, urb->transfer_buffer_length,
-                      safe_read_bulk_callback, port);
-
-       if ((result = usb_submit_urb (urb, GFP_ATOMIC))) {
-               err ("%s - failed resubmitting read urb, error %d", __func__, result);
+       usb_fill_bulk_urb(urb, port->serial->dev,
+                       usb_rcvbulkpipe(port->serial->dev,
+                                       port->bulk_in_endpointAddress),
+                       urb->transfer_buffer, urb->transfer_buffer_length,
+                       safe_read_bulk_callback, port);
+
+       result = usb_submit_urb(urb, GFP_ATOMIC);
+       if (result)
+               err("%s - failed resubmitting read urb, error %d",
+                                                       __func__, result);
                /* FIXME: Need a mechanism to retry later if this happens */
-       }
 }
 
 static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -263,23 +287,23 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
        int i;
        int packet_length;
 
-       dbg ("safe_write port: %p %d urb: %p count: %d", port, port->number, port->write_urb,
-            count);
+       dbg("safe_write port: %p %d urb: %p count: %d",
+                               port, port->number, port->write_urb, count);
 
        if (!port->write_urb) {
-               dbg ("%s - write urb NULL", __func__);
+               dbg("%s - write urb NULL", __func__);
                return 0;
        }
 
-       dbg ("safe_write write_urb: %d transfer_buffer_length",
+       dbg("safe_write write_urb: %d transfer_buffer_length",
             port->write_urb->transfer_buffer_length);
 
        if (!port->write_urb->transfer_buffer_length) {
-               dbg ("%s - write urb transfer_buffer_length zero", __func__);
+               dbg("%s - write urb transfer_buffer_length zero", __func__);
                return 0;
        }
        if (count == 0) {
-               dbg ("%s - write request of 0 bytes", __func__);
+               dbg("%s - write request of 0 bytes", __func__);
                return 0;
        }
        spin_lock_bh(&port->lock);
@@ -291,63 +315,64 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
        port->write_urb_busy = 1;
        spin_unlock_bh(&port->lock);
 
-       packet_length = port->bulk_out_size;    // get max packetsize
+       packet_length = port->bulk_out_size;    /* get max packetsize */
 
-       i = packet_length - (safe ? 2 : 0);     // get bytes to send
+       i = packet_length - (safe ? 2 : 0);     /* get bytes to send */
        count = (count > i) ? i : count;
 
 
-       // get the data into the transfer buffer
+       /* get the data into the transfer buffer */
        data = port->write_urb->transfer_buffer;
-       memset (data, '0', packet_length);
+       memset(data, '0', packet_length);
 
-       memcpy (data, buf, count);
+       memcpy(data, buf, count);
 
        if (safe) {
                __u16 fcs;
 
-               // pad if necessary
-               if (!padded) {
+               /* pad if necessary */
+               if (!padded)
                        packet_length = count + 2;
-               }
-               // set count
+               /* set count */
                data[packet_length - 2] = count << 2;
                data[packet_length - 1] = 0;
 
-               // compute fcs and insert into trailer
-               fcs = fcs_compute10 (data, packet_length, CRC10_INITFCS);
+               /* compute fcs and insert into trailer */
+               fcs = fcs_compute10(data, packet_length, CRC10_INITFCS);
                data[packet_length - 2] |= fcs >> 8;
                data[packet_length - 1] |= fcs & 0xff;
 
-               // set length to send
+               /* set length to send */
                port->write_urb->transfer_buffer_length = packet_length;
        } else {
                port->write_urb->transfer_buffer_length = count;
        }
 
-       usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
+       usb_serial_debug_data(debug, &port->dev, __func__, count,
+                                       port->write_urb->transfer_buffer);
 #ifdef ECHO_TX
        {
                int i;
                unsigned char *cp = port->write_urb->transfer_buffer;
                for (i = 0; i < port->write_urb->transfer_buffer_length; i++) {
-                       if ((i % 32) == 0) {
-                               printk ("\nsu[%02x] ", i);
-                       }
-                       printk ("%02x ", *cp++);
+                       if ((i % 32) == 0)
+                               printk("\nsu[%02x] ", i);
+                       printk("%02x ", *cp++);
                }
-               printk ("\n");
+               printk("\n");
        }
 #endif
        port->write_urb->dev = port->serial->dev;
-       if ((result = usb_submit_urb (port->write_urb, GFP_KERNEL))) {
+       result = usb_submit_urb(port->write_urb, GFP_KERNEL);
+       if (result) {
                port->write_urb_busy = 0;
-               err ("%s - failed submitting write urb, error %d", __func__, result);
+               err("%s - failed submitting write urb, error %d",
+                                                       __func__, result);
                return 0;
        }
-       dbg ("%s urb: %p submitted", __func__, port->write_urb);
+       dbg("%s urb: %p submitted", __func__, port->write_urb);
 
-       return (count);
+       return count;
 }
 
 static int safe_write_room(struct tty_struct *tty)
@@ -356,21 +381,19 @@ static int safe_write_room(struct tty_struct *tty)
        int room = 0;           /* Default: no room */
        unsigned long flags;
 
-       dbg ("%s", __func__);
+       dbg("%s", __func__);
 
        spin_lock_irqsave(&port->lock, flags);
        if (port->write_urb_busy)
                room = port->bulk_out_size - (safe ? 2 : 0);
        spin_unlock_irqrestore(&port->lock, flags);
 
-       if (room) {
-               dbg ("safe_write_room returns %d", room);
-       }
-
+       if (room)
+               dbg("safe_write_room returns %d", room);
        return room;
 }
 
-static int safe_startup (struct usb_serial *serial)
+static int safe_startup(struct usb_serial *serial)
 {
        switch (serial->interface->cur_altsetting->desc.bInterfaceProtocol) {
        case LINEO_SAFESERIAL_CRC:
@@ -398,17 +421,18 @@ static struct usb_serial_driver safe_device = {
        .attach =               safe_startup,
 };
 
-static int __init safe_init (void)
+static int __init safe_init(void)
 {
        int i, retval;
 
-       info (DRIVER_VERSION " " DRIVER_AUTHOR);
-       info (DRIVER_DESC);
-       info ("vendor: %x product: %x safe: %d padded: %d\n", vendor, product, safe, padded);
+       info(DRIVER_VERSION " " DRIVER_AUTHOR);
+       info(DRIVER_DESC);
+       info("vendor: %x product: %x safe: %d padded: %d\n",
+                                       vendor, product, safe, padded);
 
-       // if we have vendor / product parameters patch them into id list
+       /* if we have vendor / product parameters patch them into id list */
        if (vendor || product) {
-               info ("vendor: %x product: %x\n", vendor, product);
+               info("vendor: %x product: %x\n", vendor, product);
 
                for (i = 0; i < ARRAY_SIZE(id_table); i++) {
                        if (!id_table[i].idVendor && !id_table[i].idProduct) {
@@ -433,11 +457,11 @@ failed_usb_serial_register:
        return retval;
 }
 
-static void __exit safe_exit (void)
+static void __exit safe_exit(void)
 {
-       usb_deregister (&safe_driver);
-       usb_serial_deregister (&safe_device);
+       usb_deregister(&safe_driver);
+       usb_serial_deregister(&safe_device);
 }
 
-module_init (safe_init);
-module_exit (safe_exit);
+module_init(safe_init);
+module_exit(safe_exit);