#include <linux/input.h>
#include <linux/slab.h>
-#include <media/ir-common.h>
+#include <media/ir-core.h>
#include <media/v4l2-subdev.h>
#include "cx23885.h"
-#define RC5_BITS 14
-#define RC5_HALF_BITS (2*RC5_BITS)
-#define RC5_HALF_BITS_MASK ((1 << RC5_HALF_BITS) - 1)
-
-#define RC5_START_BITS_NORMAL 0x3 /* Command range 0 - 63 */
-#define RC5_START_BITS_EXTENDED 0x2 /* Command range 64 - 127 */
-
-#define RC5_EXTENDED_COMMAND_OFFSET 64
-
#define MODULE_NAME "cx23885"
-static inline unsigned int rc5_command(u32 rc5_baseband)
+static void convert_measurement(u32 x, struct ir_raw_event *y)
{
- return RC5_INSTR(rc5_baseband) +
- ((RC5_START(rc5_baseband) == RC5_START_BITS_EXTENDED)
- ? RC5_EXTENDED_COMMAND_OFFSET : 0);
-}
-
-static void cx23885_input_process_raw_rc5(struct cx23885_dev *dev)
-{
- struct cx23885_ir_input *ir_input = dev->ir_input;
- unsigned int code, command;
- u32 rc5;
-
- /* Ignore codes that are too short to be valid RC-5 */
- if (ir_input->last_bit < (RC5_HALF_BITS - 1))
- return;
-
- /* The library has the manchester coding backwards; XOR to adapt. */
- code = (ir_input->code & RC5_HALF_BITS_MASK) ^ RC5_HALF_BITS_MASK;
- rc5 = ir_rc5_decode(code);
-
- switch (RC5_START(rc5)) {
- case RC5_START_BITS_NORMAL:
- break;
- case RC5_START_BITS_EXTENDED:
- /* Don't allow if the remote only emits standard commands */
- if (ir_input->start == RC5_START_BITS_NORMAL)
- return;
- break;
- default:
+ if (x == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
+ y->pulse = false;
+ y->duration = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
return;
}
- if (ir_input->addr != RC5_ADDR(rc5))
- return;
-
- /* Don't generate a keypress for RC-5 auto-repeated keypresses */
- command = rc5_command(rc5);
- if (RC5_TOGGLE(rc5) != RC5_TOGGLE(ir_input->last_rc5) ||
- command != rc5_command(ir_input->last_rc5) ||
- /* Catch T == 0, CMD == 0 (e.g. '0') as first keypress after init */
- RC5_START(ir_input->last_rc5) == 0) {
- /* This keypress is differnet: not an auto repeat */
- ir_input_nokey(ir_input->dev, &ir_input->ir);
- ir_input_keydown(ir_input->dev, &ir_input->ir, command);
- }
- ir_input->last_rc5 = rc5;
-
- /* Schedule when we should do the key up event: ir_input_nokey() */
- mod_timer(&ir_input->timer_keyup,
- jiffies + msecs_to_jiffies(ir_input->rc5_key_timeout));
+ y->pulse = (x & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? true : false;
+ y->duration = x & V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
}
-static void cx23885_input_next_pulse_width_rc5(struct cx23885_dev *dev,
- u32 ns_pulse)
+static void cx23885_input_process_measurements(struct cx23885_dev *dev,
+ bool overrun)
{
- const int rc5_quarterbit_ns = 444444; /* 32 cycles/36 kHz/2 = 444 us */
- struct cx23885_ir_input *ir_input = dev->ir_input;
- int i, level, quarterbits, halfbits;
-
- if (!ir_input->active) {
- ir_input->active = 1;
- /* assume an initial space that we may not detect or measure */
- ir_input->code = 0;
- ir_input->last_bit = 0;
- }
+ struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
+ struct ir_raw_event kernel_ir_event;
- if (ns_pulse == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
- ir_input->last_bit++; /* Account for the final space */
- ir_input->active = 0;
- cx23885_input_process_raw_rc5(dev);
- return;
- }
-
- level = (ns_pulse & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? 1 : 0;
-
- /* Skip any leading space to sync to the start bit */
- if (ir_input->last_bit == 0 && level == 0)
- return;
-
- /*
- * With valid RC-5 we can get up to two consecutive half-bits in a
- * single pulse measurment. Experiments have shown that the duration
- * of a half-bit can vary. Make sure we always end up with an even
- * number of quarter bits at the same level (mark or space).
- */
- ns_pulse &= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
- quarterbits = ns_pulse / rc5_quarterbit_ns;
- if (quarterbits & 1)
- quarterbits++;
- halfbits = quarterbits / 2;
-
- for (i = 0; i < halfbits; i++) {
- ir_input->last_bit++;
- ir_input->code |= (level << ir_input->last_bit);
-
- if (ir_input->last_bit >= RC5_HALF_BITS-1) {
- ir_input->active = 0;
- cx23885_input_process_raw_rc5(dev);
- /*
- * If level is 1, a leading mark is invalid for RC5.
- * If level is 0, we scan past extra intial space.
- * Either way we don't want to reactivate collecting
- * marks or spaces here with any left over half-bits.
- */
- break;
- }
- }
-}
-
-static void cx23885_input_process_pulse_widths_rc5(struct cx23885_dev *dev,
- bool add_eom)
-{
- struct cx23885_ir_input *ir_input = dev->ir_input;
- struct ir_input_state *ir_input_state = &ir_input->ir;
-
- u32 ns_pulse[RC5_HALF_BITS+1];
- ssize_t num = 0;
+ u32 sd_ir_data[64];
+ ssize_t num;
int count, i;
+ bool handle = false;
do {
- v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ns_pulse,
- sizeof(ns_pulse), &num);
+ num = 0;
+ v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) sd_ir_data,
+ sizeof(sd_ir_data), &num);
count = num / sizeof(u32);
- /* Append an end of Rx seq, if the caller requested */
- if (add_eom && count < ARRAY_SIZE(ns_pulse)) {
- ns_pulse[count] = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
- count++;
+ for (i = 0; i < count; i++) {
+ convert_measurement(sd_ir_data[i], &kernel_ir_event);
+ ir_raw_event_store(kernel_ir->inp_dev,
+ &kernel_ir_event);
+ handle = true;
}
-
- /* Just drain the Rx FIFO, if we're called, but not RC-5 */
- if (ir_input_state->ir_type != IR_TYPE_RC5)
- continue;
-
- for (i = 0; i < count; i++)
- cx23885_input_next_pulse_width_rc5(dev, ns_pulse[i]);
} while (num != 0);
+
+ if (overrun)
+ ir_raw_event_reset(kernel_ir->inp_dev);
+ else if (handle)
+ ir_raw_event_handle(kernel_ir->inp_dev);
}
void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
}
if (data_available)
- cx23885_input_process_pulse_widths_rc5(dev, overrun);
+ cx23885_input_process_measurements(dev, overrun);
if (overrun) {
/* If there was a FIFO overrun, clear & restart the device */
}
}
-static void cx23885_input_ir_start(struct cx23885_dev *dev)
+static int cx23885_input_ir_start(struct cx23885_dev *dev)
{
- struct cx23885_ir_input *ir_input = dev->ir_input;
- struct ir_input_state *ir_input_state = &ir_input->ir;
struct v4l2_subdev_ir_parameters params;
if (dev->sd_ir == NULL)
- return;
+ return -ENODEV;
atomic_set(&dev->ir_input_stopping, 0);
- /* keyup timer set up, if needed */
- switch (dev->board) {
- case CX23885_BOARD_HAUPPAUGE_HVR1850:
- case CX23885_BOARD_HAUPPAUGE_HVR1290:
- setup_timer(&ir_input->timer_keyup,
- ir_rc5_timer_keyup, /* Not actually RC-5 specific */
- (unsigned long) ir_input);
- if (ir_input_state->ir_type == IR_TYPE_RC5) {
- /*
- * RC-5 repeats a held key every
- * 64 bits * (2 * 32/36000) sec/bit = 113.778 ms
- */
- ir_input->rc5_key_timeout = 115;
- }
- break;
- }
-
v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
break;
}
v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+ return 0;
+}
+
+static int cx23885_input_ir_open(void *priv)
+{
+ struct cx23885_kernel_ir *kernel_ir = priv;
+
+ if (kernel_ir->cx == NULL)
+ return -ENODEV;
+
+ return cx23885_input_ir_start(kernel_ir->cx);
}
static void cx23885_input_ir_stop(struct cx23885_dev *dev)
{
- struct cx23885_ir_input *ir_input = dev->ir_input;
struct v4l2_subdev_ir_parameters params;
if (dev->sd_ir == NULL)
}
flush_scheduled_work();
+}
- switch (dev->board) {
- case CX23885_BOARD_HAUPPAUGE_HVR1850:
- case CX23885_BOARD_HAUPPAUGE_HVR1290:
- del_timer_sync(&ir_input->timer_keyup);
- break;
- }
+static void cx23885_input_ir_close(void *priv)
+{
+ struct cx23885_kernel_ir *kernel_ir = priv;
+
+ if (kernel_ir->cx != NULL)
+ cx23885_input_ir_stop(kernel_ir->cx);
}
int cx23885_input_init(struct cx23885_dev *dev)
{
- struct cx23885_ir_input *ir;
- struct input_dev *input_dev;
- char *ir_codes = NULL;
- int ir_type, ir_addr, ir_start;
+ struct cx23885_kernel_ir *kernel_ir;
+ struct input_dev *inp_dev;
+ struct ir_dev_props *props;
+
+ char *rc_map;
+ enum rc_driver_type driver_type;
+ unsigned long allowed_protos;
+
int ret;
/*
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- /* Parameters for the grey Hauppauge remote for the HVR-1850 */
- ir_codes = RC_MAP_HAUPPAUGE_NEW;
- ir_type = IR_TYPE_RC5;
- ir_addr = 0x1e; /* RC-5 system bits emitted by the remote */
- ir_start = RC5_START_BITS_NORMAL; /* A basic RC-5 remote */
+ /* Integrated CX23888 IR controller */
+ driver_type = RC_DRIVER_IR_RAW;
+ allowed_protos = IR_TYPE_ALL;
+ /* The grey Hauppauge RC-5 remote */
+ rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
break;
- }
- if (ir_codes == NULL)
+ default:
return -ENODEV;
-
- ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev) {
- ret = -ENOMEM;
- goto err_out_free;
}
- ir->dev = input_dev;
- ir->addr = ir_addr;
- ir->start = ir_start;
+ /* cx23885 board instance kernel IR state */
+ kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL);
+ if (kernel_ir == NULL)
+ return -ENOMEM;
- /* init input device */
- ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)",
- cx23885_boards[dev->board].name);
- ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0", pci_name(dev->pci));
+ kernel_ir->cx = dev;
+ kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)",
+ cx23885_boards[dev->board].name);
+ kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0",
+ pci_name(dev->pci));
- ret = ir_input_init(input_dev, &ir->ir, ir_type);
- if (ret < 0)
+ /* input device */
+ inp_dev = input_allocate_device();
+ if (inp_dev == NULL) {
+ ret = -ENOMEM;
goto err_out_free;
+ }
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- input_dev->id.bustype = BUS_PCI;
- input_dev->id.version = 1;
+ kernel_ir->inp_dev = inp_dev;
+ inp_dev->name = kernel_ir->name;
+ inp_dev->phys = kernel_ir->phys;
+ inp_dev->id.bustype = BUS_PCI;
+ inp_dev->id.version = 1;
if (dev->pci->subsystem_vendor) {
- input_dev->id.vendor = dev->pci->subsystem_vendor;
- input_dev->id.product = dev->pci->subsystem_device;
+ inp_dev->id.vendor = dev->pci->subsystem_vendor;
+ inp_dev->id.product = dev->pci->subsystem_device;
} else {
- input_dev->id.vendor = dev->pci->vendor;
- input_dev->id.product = dev->pci->device;
+ inp_dev->id.vendor = dev->pci->vendor;
+ inp_dev->id.product = dev->pci->device;
}
- input_dev->dev.parent = &dev->pci->dev;
-
- dev->ir_input = ir;
- cx23885_input_ir_start(dev);
-
- ret = ir_input_register(ir->dev, ir_codes, NULL, MODULE_NAME);
+ inp_dev->dev.parent = &dev->pci->dev;
+
+ /* kernel ir device properties */
+ props = &kernel_ir->props;
+ props->driver_type = driver_type;
+ props->allowed_protos = allowed_protos;
+ props->priv = kernel_ir;
+ props->open = cx23885_input_ir_open;
+ props->close = cx23885_input_ir_close;
+
+ /* Go */
+ dev->kernel_ir = kernel_ir;
+ ret = ir_input_register(inp_dev, rc_map, props, MODULE_NAME);
if (ret)
goto err_out_stop;
err_out_stop:
cx23885_input_ir_stop(dev);
- dev->ir_input = NULL;
+ dev->kernel_ir = NULL;
+ /* TODO: double check clean-up of kernel_ir->inp_dev */
err_out_free:
- kfree(ir->phys);
- kfree(ir->name);
- kfree(ir);
+ kfree(kernel_ir->phys);
+ kfree(kernel_ir->name);
+ kfree(kernel_ir);
return ret;
}
/* Always stop the IR hardware from generating interrupts */
cx23885_input_ir_stop(dev);
- if (dev->ir_input == NULL)
+ if (dev->kernel_ir == NULL)
return;
- ir_input_unregister(dev->ir_input->dev);
- kfree(dev->ir_input->phys);
- kfree(dev->ir_input->name);
- kfree(dev->ir_input);
- dev->ir_input = NULL;
+ ir_input_unregister(dev->kernel_ir->inp_dev);
+ kfree(dev->kernel_ir->phys);
+ kfree(dev->kernel_ir->name);
+ kfree(dev->kernel_ir);
+ dev->kernel_ir = NULL;
}
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff