Add support for the USB clock controls found on the A80.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
--- /dev/null
+Allwinner A80 USB Clock Control Binding
+---------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+ - "allwinner,sun9i-a80-usb-clocks"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
+ - "bus": the bus clock for the whole USB subsystem
+ - "hosc": the high frequency oscillator (usually at 24MHz)
+- clock-names: Must contain the clock names described just above
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+usb_clocks: clock@a08000 {
+ compatible = "allwinner,sun9i-a80-usb-clks";
+ reg = <0x00a08000 0x8>;
+ clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+ clock-names = "bus", "hosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
+obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
--- /dev/null
+/*
+ * Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_gate.h"
+#include "ccu_reset.h"
+
+#include "ccu-sun9i-a80-usb.h"
+
+static SUNXI_CCU_GATE(bus_hci0_clk, "bus-hci0", "bus-usb", 0x0, BIT(1), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M", 0x0, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_hci1_clk, "bus-hci1", "bus-usb", 0x0, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_hci2_clk, "bus-hci2", "bus-usb", 0x0, BIT(5), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc24M", 0x0, BIT(6), 0);
+
+static SUNXI_CCU_GATE(usb0_phy_clk, "usb0-phy", "osc24M", 0x4, BIT(1), 0);
+static SUNXI_CCU_GATE(usb1_hsic_clk, "usb1-hsic", "osc24M", 0x4, BIT(2), 0);
+static SUNXI_CCU_GATE(usb1_phy_clk, "usb1-phy", "osc24M", 0x4, BIT(3), 0);
+static SUNXI_CCU_GATE(usb2_hsic_clk, "usb2-hsic", "osc24M", 0x4, BIT(4), 0);
+static SUNXI_CCU_GATE(usb2_phy_clk, "usb2-phy", "osc24M", 0x4, BIT(5), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "osc24M", 0x4, BIT(10), 0);
+
+static struct ccu_common *sun9i_a80_usb_clks[] = {
+ &bus_hci0_clk.common,
+ &usb_ohci0_clk.common,
+ &bus_hci1_clk.common,
+ &bus_hci2_clk.common,
+ &usb_ohci2_clk.common,
+
+ &usb0_phy_clk.common,
+ &usb1_hsic_clk.common,
+ &usb1_phy_clk.common,
+ &usb2_hsic_clk.common,
+ &usb2_phy_clk.common,
+ &usb_hsic_clk.common,
+};
+
+static struct clk_hw_onecell_data sun9i_a80_usb_hw_clks = {
+ .hws = {
+ [CLK_BUS_HCI0] = &bus_hci0_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_BUS_HCI1] = &bus_hci1_clk.common.hw,
+ [CLK_BUS_HCI2] = &bus_hci2_clk.common.hw,
+ [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
+
+ [CLK_USB0_PHY] = &usb0_phy_clk.common.hw,
+ [CLK_USB1_HSIC] = &usb1_hsic_clk.common.hw,
+ [CLK_USB1_PHY] = &usb1_phy_clk.common.hw,
+ [CLK_USB2_HSIC] = &usb2_hsic_clk.common.hw,
+ [CLK_USB2_PHY] = &usb2_phy_clk.common.hw,
+ [CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun9i_a80_usb_resets[] = {
+ [RST_USB0_HCI] = { 0x0, BIT(17) },
+ [RST_USB1_HCI] = { 0x0, BIT(18) },
+ [RST_USB2_HCI] = { 0x0, BIT(19) },
+
+ [RST_USB0_PHY] = { 0x4, BIT(17) },
+ [RST_USB1_HSIC] = { 0x4, BIT(18) },
+ [RST_USB1_PHY] = { 0x4, BIT(19) },
+ [RST_USB2_HSIC] = { 0x4, BIT(20) },
+ [RST_USB2_PHY] = { 0x4, BIT(21) },
+};
+
+static const struct sunxi_ccu_desc sun9i_a80_usb_clk_desc = {
+ .ccu_clks = sun9i_a80_usb_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun9i_a80_usb_clks),
+
+ .hw_clks = &sun9i_a80_usb_hw_clks,
+
+ .resets = sun9i_a80_usb_resets,
+ .num_resets = ARRAY_SIZE(sun9i_a80_usb_resets),
+};
+
+static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct clk *bus_clk;
+ void __iomem *reg;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(bus_clk)) {
+ ret = PTR_ERR(bus_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
+ return ret;
+ }
+
+ /* The bus clock needs to be enabled for us to access the registers */
+ ret = clk_prepare_enable(bus_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
+ return ret;
+ }
+
+ ret = sunxi_ccu_probe(pdev->dev.of_node, reg,
+ &sun9i_a80_usb_clk_desc);
+ if (ret)
+ goto err_disable_clk;
+
+ return 0;
+
+err_disable_clk:
+ clk_disable_unprepare(bus_clk);
+ return ret;
+}
+
+static const struct of_device_id sun9i_a80_usb_clk_ids[] = {
+ { .compatible = "allwinner,sun9i-a80-usb-clks" },
+ { }
+};
+
+static struct platform_driver sun9i_a80_usb_clk_driver = {
+ .probe = sun9i_a80_usb_clk_probe,
+ .driver = {
+ .name = "sun9i-a80-usb-clks",
+ .of_match_table = sun9i_a80_usb_clk_ids,
+ },
+};
+builtin_platform_driver(sun9i_a80_usb_clk_driver);
--- /dev/null
+/*
+ * Copyright 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN9I_A80_USB_H_
+#define _CCU_SUN9I_A80_USB_H_
+
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
+#define CLK_NUMBER (CLK_USB_HSIC + 1)
+
+#endif /* _CCU_SUN9I_A80_USB_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_
+#define _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_
+
+#define CLK_BUS_HCI0 0
+#define CLK_USB_OHCI0 1
+#define CLK_BUS_HCI1 2
+#define CLK_BUS_HCI2 3
+#define CLK_USB_OHCI2 4
+
+#define CLK_USB0_PHY 5
+#define CLK_USB1_HSIC 6
+#define CLK_USB1_PHY 7
+#define CLK_USB2_HSIC 8
+#define CLK_USB2_PHY 9
+#define CLK_USB_HSIC 10
+
+#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN9I_A80_USB_H_
+#define _DT_BINDINGS_RESET_SUN9I_A80_USB_H_
+
+#define RST_USB0_HCI 0
+#define RST_USB1_HCI 1
+#define RST_USB2_HCI 2
+
+#define RST_USB0_PHY 3
+#define RST_USB1_HSIC 4
+#define RST_USB1_PHY 5
+#define RST_USB2_HSIC 6
+#define RST_USB2_PHY 7
+
+#endif /* _DT_BINDINGS_RESET_SUN9I_A80_USB_H_ */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff