#include <linux/suspend.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
+#include "bcmdefs.h"
/* The kernel threading is sdio-specific */
-
-#include <wlioctl.h>
+#include "bcmwifi.h"
+#include "proto/802.11.h"
+#include "proto/bcmeth.h"
+#include "proto/bcmevent.h"
/* Forward decls */
struct dhd_bus;
struct dhd_prot;
struct dhd_info;
+#define WLC_UP 2
+#define WLC_SET_PROMISC 10
+#define WLC_GET_RATE 12
+#define WLC_GET_INFRA 19
+#define WLC_SET_INFRA 20
+#define WLC_GET_AUTH 21
+#define WLC_SET_AUTH 22
+#define WLC_GET_BSSID 23
+#define WLC_GET_SSID 25
+#define WLC_SET_SSID 26
+#define WLC_GET_CHANNEL 29
+#define WLC_GET_SRL 31
+#define WLC_GET_LRL 33
+#define WLC_GET_RADIO 37
+#define WLC_SET_RADIO 38
+#define WLC_GET_PHYTYPE 39
+#define WLC_SET_KEY 45
+#define WLC_SET_PASSIVE_SCAN 49
+#define WLC_SCAN 50
+#define WLC_SCAN_RESULTS 51
+#define WLC_DISASSOC 52
+#define WLC_REASSOC 53
+#define WLC_SET_ROAM_TRIGGER 55
+#define WLC_SET_ROAM_DELTA 57
+#define WLC_GET_DTIMPRD 77
+#define WLC_SET_COUNTRY 84
+#define WLC_GET_PM 85
+#define WLC_SET_PM 86
+#define WLC_GET_AP 117
+#define WLC_SET_AP 118
+#define WLC_GET_RSSI 127
+#define WLC_GET_WSEC 133
+#define WLC_SET_WSEC 134
+#define WLC_GET_PHY_NOISE 135
+#define WLC_GET_BSS_INFO 136
+#define WLC_SET_SCAN_CHANNEL_TIME 185
+#define WLC_SET_SCAN_UNASSOC_TIME 187
+#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
+#define WLC_GET_VALID_CHANNELS 217
+#define WLC_GET_KEY_PRIMARY 235
+#define WLC_SET_KEY_PRIMARY 236
+#define WLC_SET_SCAN_PASSIVE_TIME 258
+#define WLC_GET_VAR 262 /* get value of named variable */
+#define WLC_SET_VAR 263 /* set named variable to value */
+
+/* phy types (returned by WLC_GET_PHYTPE) */
+#define WLC_PHY_TYPE_A 0
+#define WLC_PHY_TYPE_B 1
+#define WLC_PHY_TYPE_G 2
+#define WLC_PHY_TYPE_N 4
+#define WLC_PHY_TYPE_LP 5
+#define WLC_PHY_TYPE_SSN 6
+#define WLC_PHY_TYPE_HT 7
+#define WLC_PHY_TYPE_LCN 8
+#define WLC_PHY_TYPE_NULL 0xf
+
+#define WL_PKT_FILTER_FIXED_LEN offsetof(wl_pkt_filter_t, u)
+#define WL_PKT_FILTER_PATTERN_FIXED_LEN offsetof(wl_pkt_filter_pattern_t, mask_and_pattern)
+
+#define WL_EVENTING_MASK_LEN 16
+
+#define TOE_TX_CSUM_OL 0x00000001
+#define TOE_RX_CSUM_OL 0x00000002
+
+/* maximum channels returned by the get valid channels iovar */
+#define WL_NUMCHANNELS 64
+
+#define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */
+
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+/* masks for channel and ssid count */
+#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
+#define WL_SCAN_PARAMS_NSSID_SHIFT 16
+
+#define WL_SCAN_ACTION_START 1
+#define WL_SCAN_ACTION_CONTINUE 2
+#define WL_SCAN_ACTION_ABORT 3
+
+#define ISCAN_REQ_VERSION 1
+
+/* wl_iscan_results status values */
+#define WL_SCAN_RESULTS_SUCCESS 0
+#define WL_SCAN_RESULTS_PARTIAL 1
+#define WL_SCAN_RESULTS_PENDING 2
+#define WL_SCAN_RESULTS_ABORTED 3
+#define WL_SCAN_RESULTS_NO_MEM 4
+
+#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */
+#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */
+
+#define IBSS_MED 15 /* Mediom in-bss congestion percentage */
+#define IBSS_HI 25 /* Hi in-bss congestion percentage */
+#define OBSS_MED 12
+#define OBSS_HI 25
+#define INTERFER_MED 5
+#define INTERFER_HI 10
+
+#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */
+#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */
+#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */
+#define CCA_FLAGS_PREFER_1_6_11 0x10
+#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */
+
+#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */
+#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */
+#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */
+#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */
+#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */
+
+#define WL_NUM_RPI_BINS 8
+#define WL_RM_TYPE_BASIC 1
+#define WL_RM_TYPE_CCA 2
+#define WL_RM_TYPE_RPI 3
+
+#define WL_RM_FLAG_PARALLEL (1<<0)
+
+#define WL_RM_FLAG_LATE (1<<1)
+#define WL_RM_FLAG_INCAPABLE (1<<2)
+#define WL_RM_FLAG_REFUSED (1<<3)
+
+#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
+#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
+#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */
+
+#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
+#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */
+#define WLC_IOCTL_MAXLEN 8192
+
+#define DHD_IF_VIF 0x01 /* Virtual IF (Hidden from user) */
+
+/* optionally set by a module_param_string() */
+#define MOD_PARAM_PATHLEN 2048
+
+/* For supporting multiple interfaces */
+#define DHD_MAX_IFS 16
+#define DHD_DEL_IF -0xe
+#define DHD_BAD_IF -0xf
+
+enum cust_gpio_modes {
+ WLAN_RESET_ON,
+ WLAN_RESET_OFF,
+ WLAN_POWER_ON,
+ WLAN_POWER_OFF
+};
+
/* The level of bus communication with the dongle */
enum dhd_bus_state {
DHD_BUS_DOWN, /* Not ready for frame transfers */
DHD_BUS_DATA /* Ready for frame transfers */
};
+/* Pattern matching filter. Specifies an offset within received packets to
+ * start matching, the pattern to match, the size of the pattern, and a bitmask
+ * that indicates which bits within the pattern should be matched.
+ */
+typedef struct wl_pkt_filter_pattern {
+ u32 offset; /* Offset within received packet to start pattern matching.
+ * Offset '0' is the first byte of the ethernet header.
+ */
+ u32 size_bytes; /* Size of the pattern. Bitmask must be the same size. */
+ u8 mask_and_pattern[1]; /* Variable length mask and pattern data. mask starts
+ * at offset 0. Pattern immediately follows mask.
+ */
+} wl_pkt_filter_pattern_t;
+
+/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
+typedef struct wl_pkt_filter {
+ u32 id; /* Unique filter id, specified by app. */
+ u32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
+ u32 negate_match; /* Negate the result of filter matches */
+ union { /* Filter definitions */
+ wl_pkt_filter_pattern_t pattern; /* Pattern matching filter */
+ } u;
+} wl_pkt_filter_t;
+
+/* IOVAR "pkt_filter_enable" parameter. */
+typedef struct wl_pkt_filter_enable {
+ u32 id; /* Unique filter id */
+ u32 enable; /* Enable/disable bool */
+} wl_pkt_filter_enable_t;
+
+/* BSS info structure
+ * Applications MUST CHECK ie_offset field and length field to access IEs and
+ * next bss_info structure in a vector (in wl_scan_results_t)
+ */
+typedef struct wl_bss_info {
+ u32 version; /* version field */
+ u32 length; /* byte length of data in this record,
+ * starting at version and including IEs
+ */
+ u8 BSSID[ETH_ALEN];
+ u16 beacon_period; /* units are Kusec */
+ u16 capability; /* Capability information */
+ u8 SSID_len;
+ u8 SSID[32];
+ struct {
+ uint count; /* # rates in this set */
+ u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ chanspec_t chanspec; /* chanspec for bss */
+ u16 atim_window; /* units are Kusec */
+ u8 dtim_period; /* DTIM period */
+ s16 RSSI; /* receive signal strength (in dBm) */
+ s8 phy_noise; /* noise (in dBm) */
+
+ u8 n_cap; /* BSS is 802.11N Capable */
+ u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */
+ u8 ctl_ch; /* 802.11N BSS control channel number */
+ u32 reserved32[1]; /* Reserved for expansion of BSS properties */
+ u8 flags; /* flags */
+ u8 reserved[3]; /* Reserved for expansion of BSS properties */
+ u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
+
+ u16 ie_offset; /* offset at which IEs start, from beginning */
+ u32 ie_length; /* byte length of Information Elements */
+ s16 SNR; /* average SNR of during frame reception */
+ /* Add new fields here */
+ /* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+ u32 SSID_len;
+ unsigned char SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+ wlc_ssid_t ssid; /* default: {0, ""} */
+ u8 bssid[ETH_ALEN]; /* default: bcast */
+ s8 bss_type; /* default: any,
+ * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+ */
+ u8 scan_type; /* flags, 0 use default */
+ s32 nprobes; /* -1 use default, number of probes per channel */
+ s32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ s32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ s32 home_time; /* -1 use default, dwell time for the home channel
+ * between channel scans
+ */
+ s32 channel_num; /* count of channels and ssids that follow
+ *
+ * low half is count of channels in channel_list, 0
+ * means default (use all available channels)
+ *
+ * high half is entries in wlc_ssid_t array that
+ * follows channel_list, aligned for s32 (4 bytes)
+ * meaning an odd channel count implies a 2-byte pad
+ * between end of channel_list and first ssid
+ *
+ * if ssid count is zero, single ssid in the fixed
+ * parameter portion is assumed, otherwise ssid in
+ * the fixed portion is ignored
+ */
+ u16 channel_list[1]; /* list of chanspecs */
+} wl_scan_params_t;
+
+/* incremental scan struct */
+typedef struct wl_iscan_params {
+ u32 version;
+ u16 action;
+ u16 scan_duration;
+ wl_scan_params_t params;
+} wl_iscan_params_t;
+
+/* 3 fields + size of wl_scan_params, not including variable length array */
+#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t))
+
+typedef struct wl_scan_results {
+ u32 buflen;
+ u32 version;
+ u32 count;
+ wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+
+typedef struct wl_rateset_args {
+ u32 count; /* # rates in this set */
+ u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
+ u8 mcs[MCSSET_LEN]; /* supported mcs index bit map */
+} wl_rateset_args_t;
+
+/* u32 list */
+typedef struct wl_u32_list {
+ /* in - # of elements, out - # of entries */
+ u32 count;
+ /* variable length u32 list */
+ u32 element[1];
+} wl_u32_list_t;
+
+/* used for association with a specific BSSID and chanspec list */
+typedef struct wl_assoc_params {
+ u8 bssid[ETH_ALEN]; /* 00:00:00:00:00:00: broadcast scan */
+ s32 chanspec_num; /* 0: all available channels,
+ * otherwise count of chanspecs in chanspec_list
+ */
+ chanspec_t chanspec_list[1]; /* list of chanspecs */
+} wl_assoc_params_t;
+#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
+
+/* used for reassociation/roam to a specific BSSID and channel */
+typedef wl_assoc_params_t wl_reassoc_params_t;
+#define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE
+
+/* used for join with or without a specific bssid and channel list */
+typedef struct wl_join_params {
+ wlc_ssid_t ssid;
+ wl_assoc_params_t params; /* optional field, but it must include the fixed portion
+ * of the wl_assoc_params_t struct when it does present.
+ */
+} wl_join_params_t;
+#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t))
+
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t))
+
+/* incremental scan results struct */
+typedef struct wl_iscan_results {
+ u32 status;
+ wl_scan_results_t results;
+} wl_iscan_results_t;
+
+/* size of wl_iscan_results not including variable length array */
+#define WL_ISCAN_RESULTS_FIXED_SIZE \
+ (WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results))
+
+typedef struct {
+ u32 duration; /* millisecs spent sampling this channel */
+ u32 congest_ibss; /* millisecs in our bss (presumably this traffic will */
+ /* move if cur bss moves channels) */
+ u32 congest_obss; /* traffic not in our bss */
+ u32 interference; /* millisecs detecting a non 802.11 interferer. */
+ u32 timestamp; /* second timestamp */
+} cca_congest_t;
+
+typedef struct {
+ chanspec_t chanspec; /* Which channel? */
+ u8 num_secs; /* How many secs worth of data */
+ cca_congest_t secs[1]; /* Data */
+} cca_congest_channel_req_t;
+
+typedef struct wl_country {
+ char country_abbrev[WLC_CNTRY_BUF_SZ]; /* nul-terminated country code used in
+ * the Country IE
+ */
+ s32 rev; /* revision specifier for ccode
+ * on set, -1 indicates unspecified.
+ * on get, rev >= 0
+ */
+ char ccode[WLC_CNTRY_BUF_SZ]; /* nul-terminated built-in country code.
+ * variable length, but fixed size in
+ * struct allows simple allocation for
+ * expected country strings <= 3 chars.
+ */
+} wl_country_t;
+
+typedef struct wl_channels_in_country {
+ u32 buflen;
+ u32 band;
+ char country_abbrev[WLC_CNTRY_BUF_SZ];
+ u32 count;
+ u32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+ u32 buflen;
+ u32 band_set;
+ u32 band;
+ u32 count;
+ char country_abbrev[1];
+} wl_country_list_t;
+
+typedef struct wl_rm_req_elt {
+ s8 type;
+ s8 flags;
+ chanspec_t chanspec;
+ u32 token; /* token for this measurement */
+ u32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ u32 tsf_l; /* TSF low 32-bits */
+ u32 dur; /* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+ u32 token; /* overall measurement set token */
+ u32 count; /* number of measurement requests */
+ void *cb; /* completion callback function: may be NULL */
+ void *cb_arg; /* arg to completion callback function */
+ wl_rm_req_elt_t req[1]; /* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN offsetof(wl_rm_req_t, req)
+
+typedef struct wl_rm_rep_elt {
+ s8 type;
+ s8 flags;
+ chanspec_t chanspec;
+ u32 token; /* token for this measurement */
+ u32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ u32 tsf_l; /* TSF low 32-bits */
+ u32 dur; /* TUs */
+ u32 len; /* byte length of data block */
+ u8 data[1]; /* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+ u8 rpi[WL_RPI_REP_BIN_NUM];
+ s8 rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+ u32 token; /* overall measurement set token */
+ u32 len; /* length of measurement report block */
+ wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN 8
+
+typedef struct wl_wsec_key {
+ u32 index; /* key index */
+ u32 len; /* key length */
+ u8 data[WLAN_MAX_KEY_LEN]; /* key data */
+ u32 pad_1[18];
+ u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ u32 flags; /* misc flags */
+ u32 pad_2[2];
+ int pad_3;
+ int iv_initialized; /* has IV been initialized already? */
+ int pad_4;
+ /* Rx IV */
+ struct {
+ u32 hi; /* upper 32 bits of IV */
+ u16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ u32 pad_5[2];
+ u8 ea[ETH_ALEN]; /* per station */
+} wl_wsec_key_t;
+
+/* Used to get specific STA parameters */
+typedef struct {
+ u32 val;
+ u8 ea[ETH_ALEN];
+} scb_val_t;
+
+/* channel encoding */
+typedef struct channel_info {
+ int hw_channel;
+ int target_channel;
+ int scan_channel;
+} channel_info_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+ uint cmd; /* common ioctl definition */
+ void *buf; /* pointer to user buffer */
+ uint len; /* length of user buffer */
+ u8 set; /* get or set request (optional) */
+ uint used; /* bytes read or written (optional) */
+ uint needed; /* bytes needed (optional) */
+} wl_ioctl_t;
+
/* Common structure for module and instance linkage */
typedef struct dhd_pub {
/* Linkage ponters */
} dhd_pub_t;
+typedef struct dhd_if_event {
+ u8 ifidx;
+ u8 action;
+ u8 flags;
+ u8 bssidx;
+} dhd_if_event_t;
+
+typedef struct {
+ u32 limit; /* Expiration time (usec) */
+ u32 increment; /* Current expiration increment (usec) */
+ u32 elapsed; /* Current elapsed time (usec) */
+ u32 tick; /* O/S tick time (usec) */
+} dhd_timeout_t;
+
#if defined(CONFIG_PM_SLEEP)
extern atomic_t dhd_mmc_suspend;
#define DHD_PM_RESUME_WAIT_INIT(a) DECLARE_WAIT_QUEUE_HEAD(a);
} while (0)
#endif /* defined(CONFIG_PM_SLEEP) */
-#define DHD_IF_VIF 0x01 /* Virtual IF (Hidden from user) */
+
+/*
+ * Insmod parameters for debug/test
+ */
+
+/* Watchdog timer interval */
+extern uint dhd_watchdog_ms;
+
+#if defined(DHD_DEBUG)
+/* Console output poll interval */
+extern uint dhd_console_ms;
+#endif /* defined(DHD_DEBUG) */
+
+/* Use interrupts */
+extern uint dhd_intr;
+
+/* Use polling */
+extern uint dhd_poll;
+
+/* ARP offload agent mode */
+extern uint dhd_arp_mode;
+
+/* ARP offload enable */
+extern uint dhd_arp_enable;
+
+/* Pkt filte enable control */
+extern uint dhd_pkt_filter_enable;
+
+/* Pkt filter init setup */
+extern uint dhd_pkt_filter_init;
+
+/* Pkt filter mode control */
+extern uint dhd_master_mode;
+
+/* Roaming mode control */
+extern uint dhd_roam;
+
+/* Roaming mode control */
+extern uint dhd_radio_up;
+
+/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */
+extern int dhd_idletime;
+#define DHD_IDLETIME_TICKS 1
+
+/* SDIO Drive Strength */
+extern uint dhd_sdiod_drive_strength;
+
+/* Override to force tx queueing all the time */
+extern uint dhd_force_tx_queueing;
+
+#ifdef SDTEST
+/* Echo packet generator (SDIO), pkts/s */
+extern uint dhd_pktgen;
+
+/* Echo packet len (0 => sawtooth, max 1800) */
+extern uint dhd_pktgen_len;
+#define MAX_PKTGEN_LEN 1800
+#endif
+
+extern char fw_path[MOD_PARAM_PATHLEN];
+extern char nv_path[MOD_PARAM_PATHLEN];
+
+extern u32 g_assert_type;
static inline void MUTEX_LOCK_INIT(dhd_pub_t *dhdp)
{
{
}
-typedef struct dhd_if_event {
- u8 ifidx;
- u8 action;
- u8 flags;
- u8 bssidx;
-} dhd_if_event_t;
-
/*
* Exported from dhd OS modules (dhd_linux/dhd_ndis)
*/
int setScheduler(struct task_struct *p, int policy, struct sched_param *param);
-typedef struct {
- u32 limit; /* Expiration time (usec) */
- u32 increment; /* Current expiration increment (usec) */
- u32 elapsed; /* Current elapsed time (usec) */
- u32 tick; /* O/S tick time (usec) */
-} dhd_timeout_t;
-
extern void dhd_timeout_start(dhd_timeout_t *tmo, uint usec);
extern int dhd_timeout_expired(dhd_timeout_t *tmo);
extern uint dhd_bus_status(dhd_pub_t *dhdp);
extern int dhd_bus_start(dhd_pub_t *dhdp);
-enum cust_gpio_modes {
- WLAN_RESET_ON,
- WLAN_RESET_OFF,
- WLAN_POWER_ON,
- WLAN_POWER_OFF
-};
-/*
- * Insmod parameters for debug/test
- */
-
-/* Watchdog timer interval */
-extern uint dhd_watchdog_ms;
-
-#if defined(DHD_DEBUG)
-/* Console output poll interval */
-extern uint dhd_console_ms;
-#endif /* defined(DHD_DEBUG) */
-
-/* Use interrupts */
-extern uint dhd_intr;
-
-/* Use polling */
-extern uint dhd_poll;
-
-/* ARP offload agent mode */
-extern uint dhd_arp_mode;
-
-/* ARP offload enable */
-extern uint dhd_arp_enable;
-
-/* Pkt filte enable control */
-extern uint dhd_pkt_filter_enable;
-
-/* Pkt filter init setup */
-extern uint dhd_pkt_filter_init;
-
-/* Pkt filter mode control */
-extern uint dhd_master_mode;
-
-/* Roaming mode control */
-extern uint dhd_roam;
-
-/* Roaming mode control */
-extern uint dhd_radio_up;
-
-/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */
-extern int dhd_idletime;
-#define DHD_IDLETIME_TICKS 1
-
-/* SDIO Drive Strength */
-extern uint dhd_sdiod_drive_strength;
-
-/* Override to force tx queueing all the time */
-extern uint dhd_force_tx_queueing;
-
-#ifdef SDTEST
-/* Echo packet generator (SDIO), pkts/s */
-extern uint dhd_pktgen;
-
-/* Echo packet len (0 => sawtooth, max 1800) */
-extern uint dhd_pktgen_len;
-#define MAX_PKTGEN_LEN 1800
-#endif
-
-/* optionally set by a module_param_string() */
-#define MOD_PARAM_PATHLEN 2048
-extern char fw_path[MOD_PARAM_PATHLEN];
-extern char nv_path[MOD_PARAM_PATHLEN];
-
-/* For supporting multiple interfaces */
-#define DHD_MAX_IFS 16
-#define DHD_DEL_IF -0xe
-#define DHD_BAD_IF -0xf
-
extern void dhd_wait_for_event(dhd_pub_t *dhd, bool * lockvar);
extern void dhd_wait_event_wakeup(dhd_pub_t *dhd);
-extern u32 g_assert_type;
-
#ifdef BCMDBG
#define ASSERT(exp) \
do { if (!(exp)) osl_assert(#exp, __FILE__, __LINE__); } while (0)
#define ASSERT(exp) do {} while (0)
#endif /* defined(BCMDBG) */
+/* Linux network driver ioctl encoding */
+typedef struct dhd_ioctl {
+ uint cmd; /* common ioctl definition */
+ void *buf; /* pointer to user buffer */
+ uint len; /* length of user buffer */
+ bool set; /* get or set request (optional) */
+ uint used; /* bytes read or written (optional) */
+ uint needed; /* bytes needed (optional) */
+ uint driver; /* to identify target driver */
+} dhd_ioctl_t;
+
+/* per-driver magic numbers */
+#define DHD_IOCTL_MAGIC 0x00444944
+
+/* bump this number if you change the ioctl interface */
+#define DHD_IOCTL_VERSION 1
+
+#define DHD_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */
+#define DHD_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define DHD_GET_MAGIC 0
+#define DHD_GET_VERSION 1
+#define DHD_GET_VAR 2
+#define DHD_SET_VAR 3
+
+/* message levels */
+#define DHD_ERROR_VAL 0x0001
+#define DHD_TRACE_VAL 0x0002
+#define DHD_INFO_VAL 0x0004
+#define DHD_DATA_VAL 0x0008
+#define DHD_CTL_VAL 0x0010
+#define DHD_TIMER_VAL 0x0020
+#define DHD_HDRS_VAL 0x0040
+#define DHD_BYTES_VAL 0x0080
+#define DHD_INTR_VAL 0x0100
+#define DHD_LOG_VAL 0x0200
+#define DHD_GLOM_VAL 0x0400
+#define DHD_EVENT_VAL 0x0800
+#define DHD_BTA_VAL 0x1000
+#define DHD_ISCAN_VAL 0x2000
+
+#ifdef SDTEST
+/* For pktgen iovar */
+typedef struct dhd_pktgen {
+ uint version; /* To allow structure change tracking */
+ uint freq; /* Max ticks between tx/rx attempts */
+ uint count; /* Test packets to send/rcv each attempt */
+ uint print; /* Print counts every <print> attempts */
+ uint total; /* Total packets (or bursts) */
+ uint minlen; /* Minimum length of packets to send */
+ uint maxlen; /* Maximum length of packets to send */
+ uint numsent; /* Count of test packets sent */
+ uint numrcvd; /* Count of test packets received */
+ uint numfail; /* Count of test send failures */
+ uint mode; /* Test mode (type of test packets) */
+ uint stop; /* Stop after this many tx failures */
+} dhd_pktgen_t;
+
+/* Version in case structure changes */
+#define DHD_PKTGEN_VERSION 2
+
+/* Type of test packets to use */
+#define DHD_PKTGEN_ECHO 1 /* Send echo requests */
+#define DHD_PKTGEN_SEND 2 /* Send discard packets */
+#define DHD_PKTGEN_RXBURST 3 /* Request dongle send N packets */
+#define DHD_PKTGEN_RECV 4 /* Continuous rx from continuous
+ tx dongle */
+#endif /* SDTEST */
+
+/* Enter idle immediately (no timeout) */
+#define DHD_IDLE_IMMEDIATE (-1)
+
+/* Values for idleclock iovar: other values are the sd_divisor to use
+ when idle */
+#define DHD_IDLE_ACTIVE 0 /* Do not request any SD clock change
+ when idle */
+#define DHD_IDLE_STOP (-1) /* Request SD clock be stopped
+ (and use SD1 mode) */
+
#endif /* _dhd_h_ */
#ifndef _wlioctl_h_
#define _wlioctl_h_
-#include <linux/ieee80211.h>
-#ifdef BRCM_FULLMAC
-#include <proto/bcmeth.h>
-#endif
-#include <proto/bcmevent.h>
-#include <proto/802.11.h>
-#include <bcmwifi.h>
-
-#ifndef INTF_NAME_SIZ
-#define INTF_NAME_SIZ 16
-#endif
-
-#ifdef BRCM_FULLMAC
-
-#define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */
-
-/* BSS info structure
- * Applications MUST CHECK ie_offset field and length field to access IEs and
- * next bss_info structure in a vector (in wl_scan_results_t)
- */
-typedef struct wl_bss_info {
- u32 version; /* version field */
- u32 length; /* byte length of data in this record,
- * starting at version and including IEs
- */
- u8 BSSID[ETH_ALEN];
- u16 beacon_period; /* units are Kusec */
- u16 capability; /* Capability information */
- u8 SSID_len;
- u8 SSID[32];
- struct {
- uint count; /* # rates in this set */
- u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
- } rateset; /* supported rates */
- chanspec_t chanspec; /* chanspec for bss */
- u16 atim_window; /* units are Kusec */
- u8 dtim_period; /* DTIM period */
- s16 RSSI; /* receive signal strength (in dBm) */
- s8 phy_noise; /* noise (in dBm) */
-
- u8 n_cap; /* BSS is 802.11N Capable */
- u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */
- u8 ctl_ch; /* 802.11N BSS control channel number */
- u32 reserved32[1]; /* Reserved for expansion of BSS properties */
- u8 flags; /* flags */
- u8 reserved[3]; /* Reserved for expansion of BSS properties */
- u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
-
- u16 ie_offset; /* offset at which IEs start, from beginning */
- u32 ie_length; /* byte length of Information Elements */
- s16 SNR; /* average SNR of during frame reception */
- /* Add new fields here */
- /* variable length Information Elements */
-} wl_bss_info_t;
-#endif /* BRCM_FULLMAC */
-
-typedef struct wlc_ssid {
- u32 SSID_len;
- unsigned char SSID[32];
-} wlc_ssid_t;
-
-#ifdef BRCM_FULLMAC
-typedef struct chan_scandata {
- u8 txpower;
- u8 pad;
- chanspec_t channel; /* Channel num, bw, ctrl_sb and band */
- u32 channel_mintime;
- u32 channel_maxtime;
-} chan_scandata_t;
-
-typedef enum wl_scan_type {
- EXTDSCAN_FOREGROUND_SCAN,
- EXTDSCAN_BACKGROUND_SCAN,
- EXTDSCAN_FORCEDBACKGROUND_SCAN
-} wl_scan_type_t;
-
-#define WLC_EXTDSCAN_MAX_SSID 5
-
-#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */
-#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */
-#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info was received on channel (vs offchannel) */
-
-typedef struct wl_extdscan_params {
- s8 nprobes; /* 0, passive, otherwise active */
- s8 split_scan; /* split scan */
- s8 band; /* band */
- s8 pad;
- wlc_ssid_t ssid[WLC_EXTDSCAN_MAX_SSID]; /* ssid list */
- u32 tx_rate; /* in 500ksec units */
- wl_scan_type_t scan_type; /* enum */
- s32 channel_num;
- chan_scandata_t channel_list[1]; /* list of chandata structs */
-} wl_extdscan_params_t;
-
-#define WL_EXTDSCAN_PARAMS_FIXED_SIZE (sizeof(wl_extdscan_params_t) - sizeof(chan_scandata_t))
-
-#define WL_BSSTYPE_INFRA 1
-#define WL_BSSTYPE_INDEP 0
-#define WL_BSSTYPE_ANY 2
-
-/* Bitmask for scan_type */
-#define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */
-#define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */
-#define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */
-
-typedef struct wl_scan_params {
- wlc_ssid_t ssid; /* default: {0, ""} */
- u8 bssid[ETH_ALEN]; /* default: bcast */
- s8 bss_type; /* default: any,
- * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
- */
- u8 scan_type; /* flags, 0 use default */
- s32 nprobes; /* -1 use default, number of probes per channel */
- s32 active_time; /* -1 use default, dwell time per channel for
- * active scanning
- */
- s32 passive_time; /* -1 use default, dwell time per channel
- * for passive scanning
- */
- s32 home_time; /* -1 use default, dwell time for the home channel
- * between channel scans
- */
- s32 channel_num; /* count of channels and ssids that follow
- *
- * low half is count of channels in channel_list, 0
- * means default (use all available channels)
- *
- * high half is entries in wlc_ssid_t array that
- * follows channel_list, aligned for s32 (4 bytes)
- * meaning an odd channel count implies a 2-byte pad
- * between end of channel_list and first ssid
- *
- * if ssid count is zero, single ssid in the fixed
- * parameter portion is assumed, otherwise ssid in
- * the fixed portion is ignored
- */
- u16 channel_list[1]; /* list of chanspecs */
-} wl_scan_params_t;
-
-/* size of wl_scan_params not including variable length array */
-#define WL_SCAN_PARAMS_FIXED_SIZE 64
-
-/* masks for channel and ssid count */
-#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
-#define WL_SCAN_PARAMS_NSSID_SHIFT 16
-
-#define WL_SCAN_ACTION_START 1
-#define WL_SCAN_ACTION_CONTINUE 2
-#define WL_SCAN_ACTION_ABORT 3
-
-#define ISCAN_REQ_VERSION 1
-
-/* incremental scan struct */
-typedef struct wl_iscan_params {
- u32 version;
- u16 action;
- u16 scan_duration;
- wl_scan_params_t params;
-} wl_iscan_params_t;
-
-/* 3 fields + size of wl_scan_params, not including variable length array */
-#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t))
-
-typedef struct wl_scan_results {
- u32 buflen;
- u32 version;
- u32 count;
- wl_bss_info_t bss_info[1];
-} wl_scan_results_t;
-
-/* size of wl_scan_results not including variable length array */
-#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t))
-
-/* wl_iscan_results status values */
-#define WL_SCAN_RESULTS_SUCCESS 0
-#define WL_SCAN_RESULTS_PARTIAL 1
-#define WL_SCAN_RESULTS_PENDING 2
-#define WL_SCAN_RESULTS_ABORTED 3
-#define WL_SCAN_RESULTS_NO_MEM 4
-
-#define ESCAN_REQ_VERSION 1
-
-typedef struct wl_escan_params {
- u32 version;
- u16 action;
- u16 sync_id;
- wl_scan_params_t params;
-} wl_escan_params_t;
-
-#define WL_ESCAN_PARAMS_FIXED_SIZE (offsetof(wl_escan_params_t, params) + sizeof(wlc_ssid_t))
-
-typedef struct wl_escan_result {
- u32 buflen;
- u32 version;
- u16 sync_id;
- u16 bss_count;
- wl_bss_info_t bss_info[1];
-} wl_escan_result_t;
-
-#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(wl_escan_result_t) - sizeof(wl_bss_info_t))
-
-/* incremental scan results struct */
-typedef struct wl_iscan_results {
- u32 status;
- wl_scan_results_t results;
-} wl_iscan_results_t;
-
-/* size of wl_iscan_results not including variable length array */
-#define WL_ISCAN_RESULTS_FIXED_SIZE \
- (WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results))
-
-typedef struct wl_probe_params {
- wlc_ssid_t ssid;
- u8 bssid[ETH_ALEN];
- u8 mac[ETH_ALEN];
-} wl_probe_params_t;
-#endif /* BRCM_FULLMAC */
-
-#define WL_NUMRATES 16 /* max # of rates in a rateset */
-typedef struct wl_rateset {
- u32 count; /* # rates in this set */
- u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
-} wl_rateset_t;
-
-#ifdef BRCM_FULLMAC
-typedef struct wl_rateset_args {
- u32 count; /* # rates in this set */
- u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
- u8 mcs[MCSSET_LEN]; /* supported mcs index bit map */
-} wl_rateset_args_t;
-
-/* u32 list */
-typedef struct wl_u32_list {
- /* in - # of elements, out - # of entries */
- u32 count;
- /* variable length u32 list */
- u32 element[1];
-} wl_u32_list_t;
-
-/* used for association with a specific BSSID and chanspec list */
-typedef struct wl_assoc_params {
- u8 bssid[ETH_ALEN]; /* 00:00:00:00:00:00: broadcast scan */
- u16 bssid_cnt;
- s32 chanspec_num; /* 0: all available channels,
- * otherwise count of chanspecs in chanspec_list
- */
- chanspec_t chanspec_list[1]; /* list of chanspecs */
-} wl_assoc_params_t;
-#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
-
-/* used for reassociation/roam to a specific BSSID and channel */
-typedef wl_assoc_params_t wl_reassoc_params_t;
-#define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE
-
-/* used for join with or without a specific bssid and channel list */
-typedef struct wl_join_params {
- wlc_ssid_t ssid;
- wl_assoc_params_t params; /* optional field, but it must include the fixed portion
- * of the wl_assoc_params_t struct when it does present.
- */
-} wl_join_params_t;
-#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t))
-
-#endif /* BRCM_FULLMAC */
-
-/* defines used by the nrate iovar */
-#define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */
-#define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */
-#define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */
-#define NRATE_STF_SHIFT 8 /* stf mode shift */
-#define NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */
-#define NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */
-#define NRATE_SGI_MASK 0x00800000 /* sgi mode */
-#define NRATE_SGI_SHIFT 23 /* sgi mode */
-#define NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */
-#define NRATE_LDPC_SHIFT 22 /* ldpc shift */
-
-#define NRATE_STF_SISO 0 /* stf mode SISO */
-#define NRATE_STF_CDD 1 /* stf mode CDD */
-#define NRATE_STF_STBC 2 /* stf mode STBC */
-#define NRATE_STF_SDM 3 /* stf mode SDM */
-
-#define ANTENNA_NUM_1 1 /* total number of antennas to be used */
-#define ANTENNA_NUM_2 2
-#define ANTENNA_NUM_3 3
-#define ANTENNA_NUM_4 4
-
-#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */
-#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */
-#define ANT_SELCFG_MAX 4 /* max number of antenna configurations */
-#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */
-#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */
-#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */
-#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */
-
-#define MAX_STREAMS_SUPPORTED 4 /* max number of streams supported */
-
-typedef struct {
- u8 ant_config[ANT_SELCFG_MAX]; /* antenna configuration */
- u8 num_antcfg; /* number of available antenna configurations */
-} wlc_antselcfg_t;
-
-#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */
-
-#ifdef BRCM_FULLMAC
-#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */
-#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */
-
-#define IBSS_MED 15 /* Mediom in-bss congestion percentage */
-#define IBSS_HI 25 /* Hi in-bss congestion percentage */
-#define OBSS_MED 12
-#define OBSS_HI 25
-#define INTERFER_MED 5
-#define INTERFER_HI 10
-
-#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */
-#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */
-#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */
-#define CCA_FLAGS_PREFER_1_6_11 0x10
-#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */
-
-#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */
-#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */
-#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */
-#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */
-#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */
-
-typedef struct {
- u32 duration; /* millisecs spent sampling this channel */
- u32 congest_ibss; /* millisecs in our bss (presumably this traffic will */
- /* move if cur bss moves channels) */
- u32 congest_obss; /* traffic not in our bss */
- u32 interference; /* millisecs detecting a non 802.11 interferer. */
- u32 timestamp; /* second timestamp */
-} cca_congest_t;
-
-typedef struct {
- chanspec_t chanspec; /* Which channel? */
- u8 num_secs; /* How many secs worth of data */
- cca_congest_t secs[1]; /* Data */
-} cca_congest_channel_req_t;
-
-#endif /* BRCM_FULLMAC */
-
-#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NUL */
-
-#ifdef BRCM_FULLMAC
-typedef struct wl_country {
- char country_abbrev[WLC_CNTRY_BUF_SZ]; /* nul-terminated country code used in
- * the Country IE
- */
- s32 rev; /* revision specifier for ccode
- * on set, -1 indicates unspecified.
- * on get, rev >= 0
- */
- char ccode[WLC_CNTRY_BUF_SZ]; /* nul-terminated built-in country code.
- * variable length, but fixed size in
- * struct allows simple allocation for
- * expected country strings <= 3 chars.
- */
-} wl_country_t;
-
-typedef struct wl_channels_in_country {
- u32 buflen;
- u32 band;
- char country_abbrev[WLC_CNTRY_BUF_SZ];
- u32 count;
- u32 channel[1];
-} wl_channels_in_country_t;
-
-typedef struct wl_country_list {
- u32 buflen;
- u32 band_set;
- u32 band;
- u32 count;
- char country_abbrev[1];
-} wl_country_list_t;
-
-#define WL_NUM_RPI_BINS 8
-#define WL_RM_TYPE_BASIC 1
-#define WL_RM_TYPE_CCA 2
-#define WL_RM_TYPE_RPI 3
-
-#define WL_RM_FLAG_PARALLEL (1<<0)
-
-#define WL_RM_FLAG_LATE (1<<1)
-#define WL_RM_FLAG_INCAPABLE (1<<2)
-#define WL_RM_FLAG_REFUSED (1<<3)
-
-typedef struct wl_rm_req_elt {
- s8 type;
- s8 flags;
- chanspec_t chanspec;
- u32 token; /* token for this measurement */
- u32 tsf_h; /* TSF high 32-bits of Measurement start time */
- u32 tsf_l; /* TSF low 32-bits */
- u32 dur; /* TUs */
-} wl_rm_req_elt_t;
-
-typedef struct wl_rm_req {
- u32 token; /* overall measurement set token */
- u32 count; /* number of measurement requests */
- void *cb; /* completion callback function: may be NULL */
- void *cb_arg; /* arg to completion callback function */
- wl_rm_req_elt_t req[1]; /* variable length block of requests */
-} wl_rm_req_t;
-#define WL_RM_REQ_FIXED_LEN offsetof(wl_rm_req_t, req)
-
-typedef struct wl_rm_rep_elt {
- s8 type;
- s8 flags;
- chanspec_t chanspec;
- u32 token; /* token for this measurement */
- u32 tsf_h; /* TSF high 32-bits of Measurement start time */
- u32 tsf_l; /* TSF low 32-bits */
- u32 dur; /* TUs */
- u32 len; /* byte length of data block */
- u8 data[1]; /* variable length data block */
-} wl_rm_rep_elt_t;
-#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
-
-#define WL_RPI_REP_BIN_NUM 8
-typedef struct wl_rm_rpi_rep {
- u8 rpi[WL_RPI_REP_BIN_NUM];
- s8 rpi_max[WL_RPI_REP_BIN_NUM];
-} wl_rm_rpi_rep_t;
-
-typedef struct wl_rm_rep {
- u32 token; /* overall measurement set token */
- u32 len; /* length of measurement report block */
- wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
-} wl_rm_rep_t;
-#define WL_RM_REP_FIXED_LEN 8
-#endif /* BRCM_FULLMAC */
-
-/* Enumerate crypto algorithms */
-#define CRYPTO_ALGO_OFF 0
-#define CRYPTO_ALGO_WEP1 1
-#define CRYPTO_ALGO_TKIP 2
-#define CRYPTO_ALGO_WEP128 3
-#define CRYPTO_ALGO_AES_CCM 4
-#define CRYPTO_ALGO_AES_RESERVED1 5
-#define CRYPTO_ALGO_AES_RESERVED2 6
-#define CRYPTO_ALGO_NALG 7
-
-#define WSEC_GEN_MIC_ERROR 0x0001
-#define WSEC_GEN_REPLAY 0x0002
-#define WSEC_GEN_ICV_ERROR 0x0004
-
-#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
-#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
-#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
-#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
-#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */
-
-typedef struct wl_wsec_key {
- u32 index; /* key index */
- u32 len; /* key length */
- u8 data[WLAN_MAX_KEY_LEN]; /* key data */
- u32 pad_1[18];
- u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
- u32 flags; /* misc flags */
- u32 pad_2[2];
- int pad_3;
- int iv_initialized; /* has IV been initialized already? */
- int pad_4;
- /* Rx IV */
- struct {
- u32 hi; /* upper 32 bits of IV */
- u16 lo; /* lower 16 bits of IV */
- } rxiv;
- u32 pad_5[2];
- u8 ea[ETH_ALEN]; /* per station */
-} wl_wsec_key_t;
-
-#define WSEC_MIN_PSK_LEN 8
-#define WSEC_MAX_PSK_LEN 64
-
-/* Flag for key material needing passhash'ing */
-#define WSEC_PASSPHRASE (1<<0)
-
-/* receptacle for WLC_SET_WSEC_PMK parameter */
-typedef struct {
- unsigned short key_len; /* octets in key material */
- unsigned short flags; /* key handling qualification */
- u8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
-} wsec_pmk_t;
-
-/* wireless security bitvec */
-#define WEP_ENABLED 0x0001
-#define TKIP_ENABLED 0x0002
-#define AES_ENABLED 0x0004
-#define WSEC_SWFLAG 0x0008
-#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
-
-/* WPA authentication mode bitvec */
-#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
-#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */
-#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
-#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
-#define WPA_AUTH_RESERVED1 0x0008
-#define WPA_AUTH_RESERVED2 0x0010
- /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */
-#define WPA2_AUTH_RESERVED1 0x0020
-#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
-#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
-#define WPA2_AUTH_RESERVED3 0x0200
-#define WPA2_AUTH_RESERVED4 0x0400
-#define WPA2_AUTH_RESERVED5 0x0800
-
-/* pmkid */
-#define MAXPMKID 16
-
-typedef struct _pmkid {
- u8 BSSID[ETH_ALEN];
- u8 PMKID[WLAN_PMKID_LEN];
-} pmkid_t;
-
-typedef struct _pmkid_list {
- u32 npmkid;
- pmkid_t pmkid[1];
-} pmkid_list_t;
-
-typedef struct _pmkid_cand {
- u8 BSSID[ETH_ALEN];
- u8 preauth;
-} pmkid_cand_t;
-
-typedef struct _pmkid_cand_list {
- u32 npmkid_cand;
- pmkid_cand_t pmkid_cand[1];
-} pmkid_cand_list_t;
-
-typedef struct wl_led_info {
- u32 index; /* led index */
- u32 behavior;
- u8 activehi;
-} wl_led_info_t;
-
-/* R_REG and W_REG struct passed through ioctl */
-typedef struct {
- u32 byteoff; /* byte offset of the field in d11regs_t */
- u32 val; /* read/write value of the field */
- u32 size; /* sizeof the field */
- uint band; /* band (optional) */
-} rw_reg_t;
-
-
-#ifdef BRCM_FULLMAC
-/* Used to get specific STA parameters */
-typedef struct {
- u32 val;
- u8 ea[ETH_ALEN];
-} scb_val_t;
-#endif /* BRCM_FULLMAC */
-
-/* channel encoding */
-typedef struct channel_info {
- int hw_channel;
- int target_channel;
- int scan_channel;
-} channel_info_t;
-
-/* For ioctls that take a list of MAC addresses */
-struct maclist {
- uint count; /* number of MAC addresses */
- u8 ea[1][ETH_ALEN]; /* variable length array of MAC addresses */
-};
-
-#ifdef BRCM_FULLMAC
-/* Linux network driver ioctl encoding */
-typedef struct wl_ioctl {
- uint cmd; /* common ioctl definition */
- void *buf; /* pointer to user buffer */
- uint len; /* length of user buffer */
- u8 set; /* get or set request (optional) */
- uint used; /* bytes read or written (optional) */
- uint needed; /* bytes needed (optional) */
-} wl_ioctl_t;
-#endif /* BRCM_FULLMAC */
-
-
-/*
- * Structure for passing hardware and software
- * revision info up from the driver.
- */
-typedef struct wlc_rev_info {
- uint vendorid; /* PCI vendor id */
- uint deviceid; /* device id of chip */
- uint radiorev; /* radio revision */
- uint chiprev; /* chip revision */
- uint corerev; /* core revision */
- uint boardid; /* board identifier (usu. PCI sub-device id) */
- uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
- uint boardrev; /* board revision */
- uint driverrev; /* driver version */
- uint ucoderev; /* microcode version */
- uint bus; /* bus type */
- uint chipnum; /* chip number */
- uint phytype; /* phy type */
- uint phyrev; /* phy revision */
- uint anarev; /* anacore rev */
- uint chippkg; /* chip package info */
-} wlc_rev_info_t;
-
-#define WL_REV_INFO_LEGACY_LENGTH 48
-
-#ifdef BRCM_FULLMAC
-#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
-#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */
-#define WLC_IOCTL_MAXLEN 8192
-#endif
-
-/* common ioctl definitions */
-#define WLC_GET_MAGIC 0
-#define WLC_GET_VERSION 1
-#define WLC_UP 2
-#define WLC_DOWN 3
-#define WLC_GET_LOOP 4
-#define WLC_SET_LOOP 5
-#define WLC_DUMP 6
-#define WLC_GET_MSGLEVEL 7
-#define WLC_SET_MSGLEVEL 8
-#define WLC_GET_PROMISC 9
-#define WLC_SET_PROMISC 10
-#define WLC_OVERLAY_IOCTL 11
-#define WLC_GET_RATE 12
- /* #define WLC_SET_RATE 13 *//* no longer supported */
-#define WLC_GET_INSTANCE 14
- /* #define WLC_GET_FRAG 15 *//* no longer supported */
- /* #define WLC_SET_FRAG 16 *//* no longer supported */
- /* #define WLC_GET_RTS 17 *//* no longer supported */
- /* #define WLC_SET_RTS 18 *//* no longer supported */
-#define WLC_GET_INFRA 19
-#define WLC_SET_INFRA 20
-#define WLC_GET_AUTH 21
-#define WLC_SET_AUTH 22
-#define WLC_GET_BSSID 23
-#define WLC_SET_BSSID 24
-#define WLC_GET_SSID 25
-#define WLC_SET_SSID 26
-#define WLC_RESTART 27
- /* #define WLC_DUMP_SCB 28 *//* no longer supported */
-#define WLC_GET_CHANNEL 29
-#define WLC_SET_CHANNEL 30
-#define WLC_GET_SRL 31
-#define WLC_SET_SRL 32
-#define WLC_GET_LRL 33
-#define WLC_SET_LRL 34
-#define WLC_GET_PLCPHDR 35
-#define WLC_SET_PLCPHDR 36
-#define WLC_GET_RADIO 37
-#define WLC_SET_RADIO 38
-#define WLC_GET_PHYTYPE 39
-#define WLC_DUMP_RATE 40
-#define WLC_SET_RATE_PARAMS 41
-#define WLC_GET_FIXRATE 42
-#define WLC_SET_FIXRATE 43
- /* #define WLC_GET_WEP 42 *//* no longer supported */
- /* #define WLC_SET_WEP 43 *//* no longer supported */
-#define WLC_GET_KEY 44
-#define WLC_SET_KEY 45
-#define WLC_GET_REGULATORY 46
-#define WLC_SET_REGULATORY 47
-#define WLC_GET_PASSIVE_SCAN 48
-#define WLC_SET_PASSIVE_SCAN 49
-#define WLC_SCAN 50
-#define WLC_SCAN_RESULTS 51
-#define WLC_DISASSOC 52
-#define WLC_REASSOC 53
-#define WLC_GET_ROAM_TRIGGER 54
-#define WLC_SET_ROAM_TRIGGER 55
-#define WLC_GET_ROAM_DELTA 56
-#define WLC_SET_ROAM_DELTA 57
-#define WLC_GET_ROAM_SCAN_PERIOD 58
-#define WLC_SET_ROAM_SCAN_PERIOD 59
-#define WLC_EVM 60 /* diag */
-#define WLC_GET_TXANT 61
-#define WLC_SET_TXANT 62
-#define WLC_GET_ANTDIV 63
-#define WLC_SET_ANTDIV 64
- /* #define WLC_GET_TXPWR 65 *//* no longer supported */
- /* #define WLC_SET_TXPWR 66 *//* no longer supported */
-#define WLC_GET_CLOSED 67
-#define WLC_SET_CLOSED 68
-#define WLC_GET_MACLIST 69
-#define WLC_SET_MACLIST 70
-#define WLC_GET_RATESET 71
-#define WLC_SET_RATESET 72
- /* #define WLC_GET_LOCALE 73 *//* no longer supported */
-#define WLC_LONGTRAIN 74
-#define WLC_GET_BCNPRD 75
-#define WLC_SET_BCNPRD 76
-#define WLC_GET_DTIMPRD 77
-#define WLC_SET_DTIMPRD 78
-#define WLC_GET_SROM 79
-#define WLC_SET_SROM 80
-#define WLC_GET_WEP_RESTRICT 81
-#define WLC_SET_WEP_RESTRICT 82
-#define WLC_GET_COUNTRY 83
-#define WLC_SET_COUNTRY 84
-#define WLC_GET_PM 85
-#define WLC_SET_PM 86
-#define WLC_GET_WAKE 87
-#define WLC_SET_WAKE 88
- /* #define WLC_GET_D11CNTS 89 *//* -> "counters" iovar */
-#define WLC_GET_FORCELINK 90 /* ndis only */
-#define WLC_SET_FORCELINK 91 /* ndis only */
-#define WLC_FREQ_ACCURACY 92 /* diag */
-#define WLC_CARRIER_SUPPRESS 93 /* diag */
-#define WLC_GET_PHYREG 94
-#define WLC_SET_PHYREG 95
-#define WLC_GET_RADIOREG 96
-#define WLC_SET_RADIOREG 97
-#define WLC_GET_REVINFO 98
-#define WLC_GET_UCANTDIV 99
-#define WLC_SET_UCANTDIV 100
-#define WLC_R_REG 101
-#define WLC_W_REG 102
-/* #define WLC_DIAG_LOOPBACK 103 old tray diag */
- /* #define WLC_RESET_D11CNTS 104 *//* -> "reset_d11cnts" iovar */
-#define WLC_GET_MACMODE 105
-#define WLC_SET_MACMODE 106
-#define WLC_GET_MONITOR 107
-#define WLC_SET_MONITOR 108
-#define WLC_GET_GMODE 109
-#define WLC_SET_GMODE 110
-#define WLC_GET_LEGACY_ERP 111
-#define WLC_SET_LEGACY_ERP 112
-#define WLC_GET_RX_ANT 113
-#define WLC_GET_CURR_RATESET 114 /* current rateset */
-#define WLC_GET_SCANSUPPRESS 115
-#define WLC_SET_SCANSUPPRESS 116
-#define WLC_GET_AP 117
-#define WLC_SET_AP 118
-#define WLC_GET_EAP_RESTRICT 119
-#define WLC_SET_EAP_RESTRICT 120
-#define WLC_SCB_AUTHORIZE 121
-#define WLC_SCB_DEAUTHORIZE 122
-#define WLC_GET_WDSLIST 123
-#define WLC_SET_WDSLIST 124
-#define WLC_GET_ATIM 125
-#define WLC_SET_ATIM 126
-#define WLC_GET_RSSI 127
-#define WLC_GET_PHYANTDIV 128
-#define WLC_SET_PHYANTDIV 129
-#define WLC_AP_RX_ONLY 130
-#define WLC_GET_TX_PATH_PWR 131
-#define WLC_SET_TX_PATH_PWR 132
-#define WLC_GET_WSEC 133
-#define WLC_SET_WSEC 134
-#define WLC_GET_PHY_NOISE 135
-#define WLC_GET_BSS_INFO 136
-#define WLC_GET_PKTCNTS 137
-#define WLC_GET_LAZYWDS 138
-#define WLC_SET_LAZYWDS 139
-#define WLC_GET_BANDLIST 140
-#define WLC_GET_BAND 141
-#define WLC_SET_BAND 142
-#define WLC_SCB_DEAUTHENTICATE 143
-#define WLC_GET_SHORTSLOT 144
-#define WLC_GET_SHORTSLOT_OVERRIDE 145
-#define WLC_SET_SHORTSLOT_OVERRIDE 146
-#define WLC_GET_SHORTSLOT_RESTRICT 147
-#define WLC_SET_SHORTSLOT_RESTRICT 148
-#define WLC_GET_GMODE_PROTECTION 149
-#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
-#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
-#define WLC_UPGRADE 152
- /* #define WLC_GET_MRATE 153 *//* no longer supported */
- /* #define WLC_SET_MRATE 154 *//* no longer supported */
-#define WLC_GET_IGNORE_BCNS 155
-#define WLC_SET_IGNORE_BCNS 156
-#define WLC_GET_SCB_TIMEOUT 157
-#define WLC_SET_SCB_TIMEOUT 158
-#define WLC_GET_ASSOCLIST 159
-#define WLC_GET_CLK 160
-#define WLC_SET_CLK 161
-#define WLC_GET_UP 162
-#define WLC_OUT 163
-#define WLC_GET_WPA_AUTH 164
-#define WLC_SET_WPA_AUTH 165
-#define WLC_GET_UCFLAGS 166
-#define WLC_SET_UCFLAGS 167
-#define WLC_GET_PWRIDX 168
-#define WLC_SET_PWRIDX 169
-#define WLC_GET_TSSI 170
-#define WLC_GET_SUP_RATESET_OVERRIDE 171
-#define WLC_SET_SUP_RATESET_OVERRIDE 172
- /* #define WLC_SET_FAST_TIMER 173 *//* no longer supported */
- /* #define WLC_GET_FAST_TIMER 174 *//* no longer supported */
- /* #define WLC_SET_SLOW_TIMER 175 *//* no longer supported */
- /* #define WLC_GET_SLOW_TIMER 176 *//* no longer supported */
- /* #define WLC_DUMP_PHYREGS 177 *//* no longer supported */
-#define WLC_GET_PROTECTION_CONTROL 178
-#define WLC_SET_PROTECTION_CONTROL 179
-#define WLC_GET_PHYLIST 180
-#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
-#define WLC_DECRYPT_STATUS 182 /* ndis only */
-#define WLC_GET_KEY_SEQ 183
-#define WLC_GET_SCAN_CHANNEL_TIME 184
-#define WLC_SET_SCAN_CHANNEL_TIME 185
-#define WLC_GET_SCAN_UNASSOC_TIME 186
-#define WLC_SET_SCAN_UNASSOC_TIME 187
-#define WLC_GET_SCAN_HOME_TIME 188
-#define WLC_SET_SCAN_HOME_TIME 189
-#define WLC_GET_SCAN_NPROBES 190
-#define WLC_SET_SCAN_NPROBES 191
-#define WLC_GET_PRB_RESP_TIMEOUT 192
-#define WLC_SET_PRB_RESP_TIMEOUT 193
-#define WLC_GET_ATTEN 194
-#define WLC_SET_ATTEN 195
-#define WLC_GET_SHMEM 196 /* diag */
-#define WLC_SET_SHMEM 197 /* diag */
- /* #define WLC_GET_GMODE_PROTECTION_CTS 198 *//* no longer supported */
- /* #define WLC_SET_GMODE_PROTECTION_CTS 199 *//* no longer supported */
-#define WLC_SET_WSEC_TEST 200
-#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
-#define WLC_TKIP_COUNTERMEASURES 202
-#define WLC_GET_PIOMODE 203
-#define WLC_SET_PIOMODE 204
-#define WLC_SET_ASSOC_PREFER 205
-#define WLC_GET_ASSOC_PREFER 206
-#define WLC_SET_ROAM_PREFER 207
-#define WLC_GET_ROAM_PREFER 208
-#define WLC_SET_LED 209
-#define WLC_GET_LED 210
-#define WLC_RESERVED6 211
-#define WLC_RESERVED7 212
-#define WLC_GET_CHANNEL_QA 213
-#define WLC_START_CHANNEL_QA 214
-#define WLC_GET_CHANNEL_SEL 215
-#define WLC_START_CHANNEL_SEL 216
-#define WLC_GET_VALID_CHANNELS 217
-#define WLC_GET_FAKEFRAG 218
-#define WLC_SET_FAKEFRAG 219
-#define WLC_GET_PWROUT_PERCENTAGE 220
-#define WLC_SET_PWROUT_PERCENTAGE 221
-#define WLC_SET_BAD_FRAME_PREEMPT 222
-#define WLC_GET_BAD_FRAME_PREEMPT 223
-#define WLC_SET_LEAP_LIST 224
-#define WLC_GET_LEAP_LIST 225
-#define WLC_GET_CWMIN 226
-#define WLC_SET_CWMIN 227
-#define WLC_GET_CWMAX 228
-#define WLC_SET_CWMAX 229
-#define WLC_GET_WET 230
-#define WLC_SET_WET 231
-#define WLC_GET_PUB 232
- /* #define WLC_SET_GLACIAL_TIMER 233 *//* no longer supported */
- /* #define WLC_GET_GLACIAL_TIMER 234 *//* no longer supported */
-#define WLC_GET_KEY_PRIMARY 235
-#define WLC_SET_KEY_PRIMARY 236
- /* #define WLC_DUMP_RADIOREGS 237 *//* no longer supported */
-#define WLC_RESERVED4 238
-#define WLC_RESERVED5 239
-#define WLC_UNSET_CALLBACK 240
-#define WLC_SET_CALLBACK 241
-#define WLC_GET_RADAR 242
-#define WLC_SET_RADAR 243
-#define WLC_SET_SPECT_MANAGMENT 244
-#define WLC_GET_SPECT_MANAGMENT 245
-#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */
-#define WLC_WDS_GET_WPA_SUP 247
-#define WLC_SET_CS_SCAN_TIMER 248
-#define WLC_GET_CS_SCAN_TIMER 249
-#define WLC_MEASURE_REQUEST 250
-#define WLC_INIT 251
-#define WLC_SEND_QUIET 252
-#define WLC_KEEPALIVE 253
-#define WLC_SEND_PWR_CONSTRAINT 254
-#define WLC_UPGRADE_STATUS 255
-#define WLC_CURRENT_PWR 256
-#define WLC_GET_SCAN_PASSIVE_TIME 257
-#define WLC_SET_SCAN_PASSIVE_TIME 258
-#define WLC_LEGACY_LINK_BEHAVIOR 259
-#define WLC_GET_CHANNELS_IN_COUNTRY 260
-#define WLC_GET_COUNTRY_LIST 261
-#define WLC_GET_VAR 262 /* get value of named variable */
-#define WLC_SET_VAR 263 /* set named variable to value */
-#define WLC_NVRAM_GET 264 /* deprecated */
-#define WLC_NVRAM_SET 265
-#define WLC_NVRAM_DUMP 266
-#define WLC_REBOOT 267
-#define WLC_SET_WSEC_PMK 268
-#define WLC_GET_AUTH_MODE 269
-#define WLC_SET_AUTH_MODE 270
-#define WLC_GET_WAKEENTRY 271
-#define WLC_SET_WAKEENTRY 272
-#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */
-#define WLC_NVOTPW 274
-#define WLC_OTPW 275
-#define WLC_IOV_BLOCK_GET 276
-#define WLC_IOV_MODULES_GET 277
-#define WLC_SOFT_RESET 278
-#define WLC_GET_ALLOW_MODE 279
-#define WLC_SET_ALLOW_MODE 280
-#define WLC_GET_DESIRED_BSSID 281
-#define WLC_SET_DESIRED_BSSID 282
-#define WLC_DISASSOC_MYAP 283
-#define WLC_GET_RESERVED10 284
-#define WLC_GET_RESERVED11 285
-#define WLC_GET_RESERVED12 286
-#define WLC_GET_RESERVED13 287
-#define WLC_GET_RESERVED14 288
-#define WLC_SET_RESERVED15 289
-#define WLC_SET_RESERVED16 290
-#define WLC_GET_RESERVED17 291
-#define WLC_GET_RESERVED18 292
-#define WLC_GET_RESERVED19 293
-#define WLC_SET_RESERVED1A 294
-#define WLC_GET_RESERVED1B 295
-#define WLC_GET_RESERVED1C 296
-#define WLC_GET_RESERVED1D 297
-#define WLC_SET_RESERVED1E 298
-#define WLC_GET_RESERVED1F 299
-#define WLC_GET_RESERVED20 300
-#define WLC_GET_RESERVED21 301
-#define WLC_GET_RESERVED22 302
-#define WLC_GET_RESERVED23 303
-#define WLC_GET_RESERVED24 304
-#define WLC_SET_RESERVED25 305
-#define WLC_GET_RESERVED26 306
-#define WLC_NPHY_SAMPLE_COLLECT 307 /* Nphy sample collect mode */
-#define WLC_UM_PRIV 308 /* for usermode driver private ioctl */
-#define WLC_GET_CMD 309
- /* #define WLC_LAST 310 *//* Never used - can be reused */
-#define WLC_RESERVED8 311
-#define WLC_RESERVED9 312
-#define WLC_RESERVED1 313
-#define WLC_RESERVED2 314
-#define WLC_RESERVED3 315
-#define WLC_LAST 316
-
-#ifndef EPICTRL_COOKIE
-#define EPICTRL_COOKIE 0xABADCEDE
-#endif
-
-#define WL_DECRYPT_STATUS_SUCCESS 1
-#define WL_DECRYPT_STATUS_FAILURE 2
-#define WL_DECRYPT_STATUS_UNKNOWN 3
-
-/* allows user-mode app to poll the status of USB image upgrade */
-#define WLC_UPGRADE_SUCCESS 0
-#define WLC_UPGRADE_PENDING 1
-
-/* WLC_GET_AUTH, WLC_SET_AUTH values */
-#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */
-#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */
-#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */
-
-/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
-#define WL_RADIO_SW_DISABLE (1<<0)
-#define WL_RADIO_HW_DISABLE (1<<1)
-#define WL_RADIO_MPC_DISABLE (1<<2)
-#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */
-
-#define WL_SPURAVOID_OFF 0
-#define WL_SPURAVOID_ON1 1
-#define WL_SPURAVOID_ON2 2
-
-/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
-#define WL_TXPWR_OVERRIDE (1U<<31)
-
-#define WL_PHY_PAVARS_LEN 6 /* Phy type, Band range, chain, a1, b0, b1 */
-
-typedef struct wl_po {
- u16 phy_type; /* Phy type */
- u16 band;
- u16 cckpo;
- u32 ofdmpo;
- u16 mcspo[8];
-} wl_po_t;
-
-/* a large TX Power as an init value to factor out of min() calculations,
- * keep low enough to fit in an s8, units are .25 dBm
- */
-#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */
-
-/* "diag" iovar argument and error code */
-#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */
-#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */
-#define WL_DIAG_MEMORY 3 /* d11 memory test */
-#define WL_DIAG_LED 4 /* LED test */
-#define WL_DIAG_REG 5 /* d11/phy register test */
-#define WL_DIAG_SROM 6 /* srom read/crc test */
-#define WL_DIAG_DMA 7 /* DMA test */
-
-#define WL_DIAGERR_SUCCESS 0
-#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */
-#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */
-#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */
-#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */
-#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */
-#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */
-#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */
-#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */
-#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */
-#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */
-
-#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */
-#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */
-
-/* band types */
-#define WLC_BAND_AUTO 0 /* auto-select */
-#define WLC_BAND_5G 1 /* 5 Ghz */
-#define WLC_BAND_2G 2 /* 2.4 Ghz */
-#define WLC_BAND_ALL 3 /* all bands */
-
-/* band range returned by band_range iovar */
-#define WL_CHAN_FREQ_RANGE_2G 0
-#define WL_CHAN_FREQ_RANGE_5GL 1
-#define WL_CHAN_FREQ_RANGE_5GM 2
-#define WL_CHAN_FREQ_RANGE_5GH 3
-
-/* phy types (returned by WLC_GET_PHYTPE) */
-#define WLC_PHY_TYPE_A 0
-#define WLC_PHY_TYPE_B 1
-#define WLC_PHY_TYPE_G 2
-#define WLC_PHY_TYPE_N 4
-#define WLC_PHY_TYPE_LP 5
-#define WLC_PHY_TYPE_SSN 6
-#define WLC_PHY_TYPE_HT 7
-#define WLC_PHY_TYPE_LCN 8
-#define WLC_PHY_TYPE_NULL 0xf
-
-/* MAC list modes */
-#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
-#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
-#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
-
-/*
- * 54g modes (basic bits may still be overridden)
- *
- * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11
- * Preamble: Long
- * Shortslot: Off
- * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
- * Extended Rateset: 6, 9, 12, 48
- * Preamble: Long
- * Shortslot: Auto
- * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
- * Extended Rateset: 6b, 9, 12b, 48
- * Preamble: Short required
- * Shortslot: Auto
- * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
- * Extended Rateset: 6, 9, 12, 48
- * Preamble: Long
- * Shortslot: On
- * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
- * Preamble: Short required
- * Shortslot: On and required
- * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b
- * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
- * Preamble: Long
- * Shortslot: Auto
- */
-#define GMODE_LEGACY_B 0
-#define GMODE_AUTO 1
-#define GMODE_ONLY 2
-#define GMODE_B_DEFERRED 3
-#define GMODE_PERFORMANCE 4
-#define GMODE_LRS 5
-#define GMODE_MAX 6
-
-/* values for PLCPHdr_override */
-#define WLC_PLCP_AUTO -1
-#define WLC_PLCP_SHORT 0
-#define WLC_PLCP_LONG 1
-
-/* values for g_protection_override and n_protection_override */
-#define WLC_PROTECTION_AUTO -1
-#define WLC_PROTECTION_OFF 0
-#define WLC_PROTECTION_ON 1
-#define WLC_PROTECTION_MMHDR_ONLY 2
-#define WLC_PROTECTION_CTS_ONLY 3
-
-/* values for g_protection_control and n_protection_control */
-#define WLC_PROTECTION_CTL_OFF 0
-#define WLC_PROTECTION_CTL_LOCAL 1
-#define WLC_PROTECTION_CTL_OVERLAP 2
-
-/* values for n_protection */
-#define WLC_N_PROTECTION_OFF 0
-#define WLC_N_PROTECTION_OPTIONAL 1
-#define WLC_N_PROTECTION_20IN40 2
-#define WLC_N_PROTECTION_MIXEDMODE 3
-
-/* values for n_preamble_type */
-#define WLC_N_PREAMBLE_MIXEDMODE 0
-#define WLC_N_PREAMBLE_GF 1
-#define WLC_N_PREAMBLE_GF_BRCM 2
-
-/* values for band specific 40MHz capabilities */
-#define WLC_N_BW_20ALL 0
-#define WLC_N_BW_40ALL 1
-#define WLC_N_BW_20IN2G_40IN5G 2
-
-/* values to force tx/rx chain */
-#define WLC_N_TXRX_CHAIN0 0
-#define WLC_N_TXRX_CHAIN1 1
-
-/* bitflags for SGI support (sgi_rx iovar) */
-#define WLC_N_SGI_20 0x01
-#define WLC_N_SGI_40 0x02
-
-/* Values for PM */
-#define PM_OFF 0
-#define PM_MAX 1
-
-/* interference mitigation options */
-#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */
-#define INTERFERE_NONE 0 /* off */
-#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
-#define WLAN_MANUAL 2 /* ACI: no auto detection */
-#define WLAN_AUTO 3 /* ACI: auto detect */
-#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */
-#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */
-
-#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */
-#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */
-#define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */
-#define WL_ANT_IDX_1 0 /* antenna index 1 */
-#define WL_ANT_IDX_2 1 /* antenna index 2 */
-
-#ifndef WL_RSSI_ANT_MAX
-#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */
-#elif WL_RSSI_ANT_MAX != 4
-#error "WL_RSSI_ANT_MAX does not match"
-#endif
-
-/* RSSI per antenna */
-typedef struct {
- u32 version; /* version field */
- u32 count; /* number of valid antenna rssi */
- s8 rssi_ant[WL_RSSI_ANT_MAX]; /* rssi per antenna */
-} wl_rssi_ant_t;
-
-#define NUM_PWRCTRL_RATES 12
-
-typedef struct {
- u8 txpwr_band_max[NUM_PWRCTRL_RATES]; /* User set target */
- u8 txpwr_limit[NUM_PWRCTRL_RATES]; /* reg and local power limit */
- u8 txpwr_local_max; /* local max according to the AP */
- u8 txpwr_local_constraint; /* local constraint according to the AP */
- u8 txpwr_chan_reg_max; /* Regulatory max for this channel */
- u8 txpwr_target[2][NUM_PWRCTRL_RATES]; /* Latest target for 2.4 and 5 Ghz */
- u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */
- u8 txpwr_opo[NUM_PWRCTRL_RATES]; /* On G phy, OFDM power offset */
- u8 txpwr_bphy_cck_max[NUM_PWRCTRL_RATES]; /* Max CCK power for this band (SROM) */
- u8 txpwr_bphy_ofdm_max; /* Max OFDM power for this band (SROM) */
- u8 txpwr_aphy_max[NUM_PWRCTRL_RATES]; /* Max power for A band (SROM) */
- s8 txpwr_antgain[2]; /* Ant gain for each band - from SROM */
- u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */
-} tx_power_legacy_t;
-
-#define WL_TX_POWER_RATES_LEGACY 45
-#define WL_TX_POWER_MCS20_FIRST 12
-#define WL_TX_POWER_MCS20_NUM 16
-#define WL_TX_POWER_MCS40_FIRST 28
-#define WL_TX_POWER_MCS40_NUM 17
-
-
-#define WL_TX_POWER_RATES 101
-#define WL_TX_POWER_CCK_FIRST 0
-#define WL_TX_POWER_CCK_NUM 4
-#define WL_TX_POWER_OFDM_FIRST 4 /* Index for first 20MHz OFDM SISO rate */
-#define WL_TX_POWER_OFDM20_CDD_FIRST 12 /* Index for first 20MHz OFDM CDD rate */
-#define WL_TX_POWER_OFDM40_SISO_FIRST 52 /* Index for first 40MHz OFDM SISO rate */
-#define WL_TX_POWER_OFDM40_CDD_FIRST 60 /* Index for first 40MHz OFDM CDD rate */
-#define WL_TX_POWER_OFDM_NUM 8
-#define WL_TX_POWER_MCS20_SISO_FIRST 20 /* Index for first 20MHz MCS SISO rate */
-#define WL_TX_POWER_MCS20_CDD_FIRST 28 /* Index for first 20MHz MCS CDD rate */
-#define WL_TX_POWER_MCS20_STBC_FIRST 36 /* Index for first 20MHz MCS STBC rate */
-#define WL_TX_POWER_MCS20_SDM_FIRST 44 /* Index for first 20MHz MCS SDM rate */
-#define WL_TX_POWER_MCS40_SISO_FIRST 68 /* Index for first 40MHz MCS SISO rate */
-#define WL_TX_POWER_MCS40_CDD_FIRST 76 /* Index for first 40MHz MCS CDD rate */
-#define WL_TX_POWER_MCS40_STBC_FIRST 84 /* Index for first 40MHz MCS STBC rate */
-#define WL_TX_POWER_MCS40_SDM_FIRST 92 /* Index for first 40MHz MCS SDM rate */
-#define WL_TX_POWER_MCS_1_STREAM_NUM 8
-#define WL_TX_POWER_MCS_2_STREAM_NUM 8
-#define WL_TX_POWER_MCS_32 100 /* Index for 40MHz rate MCS 32 */
-#define WL_TX_POWER_MCS_32_NUM 1
-
-/* sslpnphy specifics */
-#define WL_TX_POWER_MCS20_SISO_FIRST_SSN 12 /* Index for first 20MHz MCS SISO rate */
-
-/* tx_power_t.flags bits */
-#define WL_TX_POWER_F_ENABLED 1
-#define WL_TX_POWER_F_HW 2
-#define WL_TX_POWER_F_MIMO 4
-#define WL_TX_POWER_F_SISO 8
-
-typedef struct {
- u32 flags;
- chanspec_t chanspec; /* txpwr report for this channel */
- chanspec_t local_chanspec; /* channel on which we are associated */
- u8 local_max; /* local max according to the AP */
- u8 local_constraint; /* local constraint according to the AP */
- s8 antgain[2]; /* Ant gain for each band - from SROM */
- u8 rf_cores; /* count of RF Cores being reported */
- u8 est_Pout[4]; /* Latest tx power out estimate per RF chain */
- u8 est_Pout_act[4]; /* Latest tx power out estimate per RF chain
- * without adjustment
- */
- u8 est_Pout_cck; /* Latest CCK tx power out estimate */
- u8 tx_power_max[4]; /* Maximum target power among all rates */
- u8 tx_power_max_rate_ind[4]; /* Index of the rate with the max target power */
- u8 user_limit[WL_TX_POWER_RATES]; /* User limit */
- u8 reg_limit[WL_TX_POWER_RATES]; /* Regulatory power limit */
- u8 board_limit[WL_TX_POWER_RATES]; /* Max power board can support (SROM) */
- u8 target[WL_TX_POWER_RATES]; /* Latest target power */
-} tx_power_t;
-
-typedef struct tx_inst_power {
- u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */
- u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */
-} tx_inst_power_t;
-
-/* Message levels */
-#define WL_ERROR_VAL 0x00000001
-#define WL_TRACE_VAL 0x00000002
-
-/* maximum channels returned by the get valid channels iovar */
-#define WL_NUMCHANNELS 64
-#define WL_NUMCHANSPECS 100
-
-struct tsinfo_arg {
- u8 octets[3];
-};
-
-#define NFIFO 6 /* # tx/rx fifopairs */
-
-struct wl_msglevel2 {
- u32 low;
- u32 high;
-};
-
-/* structure for per-tid ampdu control */
-struct ampdu_tid_control {
- u8 tid; /* tid */
- u8 enable; /* enable/disable */
-};
-
-/* structure for identifying ea/tid for sending addba/delba */
-struct ampdu_ea_tid {
- u8 ea[ETH_ALEN]; /* Station address */
- u8 tid; /* tid */
-};
-/* structure for identifying retry/tid for retry_limit_tid/rr_retry_limit_tid */
-struct ampdu_retry_tid {
- u8 tid; /* tid */
- u8 retry; /* retry value */
-};
-
-
-/* Software feature flag defines used by wlfeatureflag */
-#define WL_SWFL_NOHWRADIO 0x0004
-#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */
-#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */
-
-#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
-
-
-/* Pattern matching filter. Specifies an offset within received packets to
- * start matching, the pattern to match, the size of the pattern, and a bitmask
- * that indicates which bits within the pattern should be matched.
- */
-typedef struct wl_pkt_filter_pattern {
- u32 offset; /* Offset within received packet to start pattern matching.
- * Offset '0' is the first byte of the ethernet header.
- */
- u32 size_bytes; /* Size of the pattern. Bitmask must be the same size. */
- u8 mask_and_pattern[1]; /* Variable length mask and pattern data. mask starts
- * at offset 0. Pattern immediately follows mask.
- */
-} wl_pkt_filter_pattern_t;
-
-/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
-typedef struct wl_pkt_filter {
- u32 id; /* Unique filter id, specified by app. */
- u32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
- u32 negate_match; /* Negate the result of filter matches */
- union { /* Filter definitions */
- wl_pkt_filter_pattern_t pattern; /* Pattern matching filter */
- } u;
-} wl_pkt_filter_t;
-
-#define WL_PKT_FILTER_FIXED_LEN offsetof(wl_pkt_filter_t, u)
-#define WL_PKT_FILTER_PATTERN_FIXED_LEN offsetof(wl_pkt_filter_pattern_t, mask_and_pattern)
-
-/* IOVAR "pkt_filter_enable" parameter. */
-typedef struct wl_pkt_filter_enable {
- u32 id; /* Unique filter id */
- u32 enable; /* Enable/disable bool */
-} wl_pkt_filter_enable_t;
-
-
-#define WLC_RSSI_INVALID 0 /* invalid RSSI value */
-
-/* n-mode support capability */
-/* 2x2 includes both 1x1 & 2x2 devices
- * reserved #define 2 for future when we want to separate 1x1 & 2x2 and
- * control it independently
- */
-#define WL_11N_2x2 1
-#define WL_11N_3x3 3
-#define WL_11N_4x4 4
-
-/* define 11n feature disable flags */
-#define WLFEATURE_DISABLE_11N 0x00000001
-#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002
-#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004
-#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008
-#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010
-#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020
-#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040
-#define WLFEATURE_DISABLE_11N_GF 0x00000080
-
-#define WL_EVENTING_MASK_LEN 16
-
-#define TOE_TX_CSUM_OL 0x00000001
-#define TOE_RX_CSUM_OL 0x00000002
-
-#define PM_OFF 0
-#define PM_MAX 1
-#define PM_FAST 2
-
-typedef enum sup_auth_status {
- WLC_SUP_DISCONNECTED = 0,
- WLC_SUP_CONNECTING,
- WLC_SUP_IDREQUIRED,
- WLC_SUP_AUTHENTICATING,
- WLC_SUP_AUTHENTICATED,
- WLC_SUP_KEYXCHANGE,
- WLC_SUP_KEYED,
- WLC_SUP_TIMEOUT,
- WLC_SUP_LAST_BASIC_STATE,
- WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED,
- WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE,
- WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE,
- WLC_SUP_KEYXCHANGE_PREP_M4,
- WLC_SUP_KEYXCHANGE_WAIT_G1,
- WLC_SUP_KEYXCHANGE_PREP_G2
-} sup_auth_status_t;
#endif /* _wlioctl_h_ */
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff