ARM: S5PC100: UART and Serial

Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644 (file)
index 0000000..f749bc5
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *     Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+       [0] = {
+               .start  = S3C_PA_UART0,
+               .end    = S3C_PA_UART0 + 0x100,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = IRQ_S3CUART_RX0,
+               .end    = IRQ_S3CUART_RX0,
+               .flags  = IORESOURCE_IRQ,
+       },
+       [2] = {
+               .start  = IRQ_S3CUART_TX0,
+               .end    = IRQ_S3CUART_TX0,
+               .flags  = IORESOURCE_IRQ,
+
+       },
+       [3] = {
+               .start  = IRQ_S3CUART_ERR0,
+               .end    = IRQ_S3CUART_ERR0,
+               .flags  = IORESOURCE_IRQ,
+       }
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+       [0] = {
+               .start = S3C_PA_UART1,
+               .end   = S3C_PA_UART1 + 0x100,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = IRQ_S3CUART_RX1,
+               .end    = IRQ_S3CUART_RX1,
+               .flags  = IORESOURCE_IRQ,
+       },
+       [2] = {
+               .start  = IRQ_S3CUART_TX1,
+               .end    = IRQ_S3CUART_TX1,
+               .flags  = IORESOURCE_IRQ,
+
+       },
+       [3] = {
+               .start  = IRQ_S3CUART_ERR1,
+               .end    = IRQ_S3CUART_ERR1,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+       [0] = {
+               .start = S3C_PA_UART2,
+               .end   = S3C_PA_UART2 + 0x100,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = IRQ_S3CUART_RX2,
+               .end    = IRQ_S3CUART_RX2,
+               .flags  = IORESOURCE_IRQ,
+       },
+       [2] = {
+               .start  = IRQ_S3CUART_TX2,
+               .end    = IRQ_S3CUART_TX2,
+               .flags  = IORESOURCE_IRQ,
+
+       },
+       [3] = {
+               .start  = IRQ_S3CUART_ERR2,
+               .end    = IRQ_S3CUART_ERR2,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+       [0] = {
+               .start = S3C_PA_UART3,
+               .end   = S3C_PA_UART3 + 0x100,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = IRQ_S3CUART_RX3,
+               .end    = IRQ_S3CUART_RX3,
+               .flags  = IORESOURCE_IRQ,
+       },
+       [2] = {
+               .start  = IRQ_S3CUART_TX3,
+               .end    = IRQ_S3CUART_TX3,
+               .flags  = IORESOURCE_IRQ,
+
+       },
+       [3] = {
+               .start  = IRQ_S3CUART_ERR3,
+               .end    = IRQ_S3CUART_ERR3,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+       [0] = {
+               .resources      = s5pc1xx_uart0_resource,
+               .nr_resources   = ARRAY_SIZE(s5pc1xx_uart0_resource),
+       },
+       [1] = {
+               .resources      = s5pc1xx_uart1_resource,
+               .nr_resources   = ARRAY_SIZE(s5pc1xx_uart1_resource),
+       },
+       [2] = {
+               .resources      = s5pc1xx_uart2_resource,
+               .nr_resources   = ARRAY_SIZE(s5pc1xx_uart2_resource),
+       },
+       [3] = {
+               .resources      = s5pc1xx_uart3_resource,
+               .nr_resources   = ARRAY_SIZE(s5pc1xx_uart3_resource),
+       },
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+       .id             = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+       .id             = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+       .id             = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+       .id             = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+       &s3c24xx_uart_device0,
+       &s3c24xx_uart_device1,
+       &s3c24xx_uart_device2,
+       &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 037c1e0b7c4c5bd137c0720ccaa3210716c09435..cdd552d33a78ed138531ca34ef8044276e0e268e 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS
        int
        depends on ARM && PLAT_S3C
        default 2 if ARCH_S3C2400
-       default 4 if ARCH_S3C64XX || CPU_S3C2443
+       default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
        default 3
        help
          Select the number of available UART ports for the Samsung S3C
@@ -533,6 +533,13 @@ config SERIAL_S3C6400
          Serial port support for the Samsung S3C6400 and S3C6410
          SoCs
 
+config SERIAL_S5PC100
+       tristate "Samsung S5PC100 Serial port support"
+       depends on SERIAL_SAMSUNG && CPU_S5PC100
+       default y
+       help
+         Serial port support for the Samsung S5PC100 SoCs
+
 config SERIAL_MAX3100
        tristate "MAX3100 support"
        depends on SPI

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a29981c6c4fa6f58c42320b27ae3204526a293..97f6fcc8b4320c0de348691198beb8f044aa8e60 100644 (file)
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o