ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1

It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
wireless chipsets. LEDs will be hopefully added later to the DT.
According to some sources it may use the same board as EA6400 and just
differ by an original vendor firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3e546eeb233ddd618aa074f5e4008e4ee0701a7f..665abb891118f23255e3c918ecea8d267fd9cb9d 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm4708-asus-rt-ac56u.dtb \
        bcm4708-asus-rt-ac68u.dtb \
        bcm4708-buffalo-wzr-1750dhp.dtb \
+       bcm4708-linksys-ea6300-v1.dtb \
        bcm4708-luxul-xap-1510.dtb \
        bcm4708-luxul-xwc-1000.dtb \
        bcm4708-netgear-r6250.dtb \

diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
new file mode 100644 (file)
index 0000000..126ab58
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+       compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+       model = "Linksys EA6300 V1";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               wps {
+                       label = "WPS";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+               };
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+};