struct be_async_event_link_state *evt)
{
/* When link status changes, link speed must be re-queried from FW */
- adapter->link_speed = -1;
+ adapter->phy.link_speed = -1;
/* For the initial link status do not rely on the ASYNC event as
* it may not be received in some cases.
{
if (evt->physical_port == adapter->port_num) {
/* qos_link_speed is in units of 10 Mbps */
- adapter->link_speed = evt->qos_link_speed * 10;
+ adapter->phy.link_speed = evt->qos_link_speed * 10;
}
}
return status;
}
-int be_cmd_get_phy_info(struct be_adapter *adapter,
- struct be_phy_info *phy_info)
+int be_cmd_get_phy_info(struct be_adapter *adapter)
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_get_phy_info *req;
if (!status) {
struct be_phy_info *resp_phy_info =
cmd.va + sizeof(struct be_cmd_req_hdr);
- phy_info->phy_type = le16_to_cpu(resp_phy_info->phy_type);
- phy_info->interface_type =
+ adapter->phy.phy_type = le16_to_cpu(resp_phy_info->phy_type);
+ adapter->phy.interface_type =
le16_to_cpu(resp_phy_info->interface_type);
+ adapter->phy.auto_speeds_supported =
+ le16_to_cpu(resp_phy_info->auto_speeds_supported);
+ adapter->phy.fixed_speeds_supported =
+ le16_to_cpu(resp_phy_info->fixed_speeds_supported);
+ adapter->phy.misc_params =
+ le32_to_cpu(resp_phy_info->misc_params);
}
pci_free_consistent(adapter->pdev, cmd.size,
cmd.va, cmd.dma);
PHY_TYPE_KX4_10GB,
PHY_TYPE_BASET_10GB,
PHY_TYPE_BASET_1GB,
+ PHY_TYPE_BASEX_1GB,
+ PHY_TYPE_SGMII,
PHY_TYPE_DISABLED = 255
};
+#define BE_SUPPORTED_SPEED_NONE 0
+#define BE_SUPPORTED_SPEED_10MBPS 1
+#define BE_SUPPORTED_SPEED_100MBPS 2
+#define BE_SUPPORTED_SPEED_1GBPS 4
+#define BE_SUPPORTED_SPEED_10GBPS 8
+
+#define BE_AN_EN 0x2
+#define BE_PAUSE_SYM_EN 0x80
+
+/* MAC speed valid values */
+#define SPEED_DEFAULT 0x0
+#define SPEED_FORCED_10GB 0x1
+#define SPEED_FORCED_1GB 0x2
+#define SPEED_AUTONEG_10GB 0x3
+#define SPEED_AUTONEG_1GB 0x4
+#define SPEED_AUTONEG_100MB 0x5
+#define SPEED_AUTONEG_10GB_1GB 0x6
+#define SPEED_AUTONEG_10GB_1GB_100MB 0x7
+#define SPEED_AUTONEG_1GB_100MB 0x8
+#define SPEED_AUTONEG_10MB 0x9
+#define SPEED_AUTONEG_1GB_100MB_10MB 0xa
+#define SPEED_AUTONEG_100MB_10MB 0xb
+#define SPEED_FORCED_100MB 0xc
+#define SPEED_FORCED_10MB 0xd
+
struct be_cmd_req_get_phy_info {
struct be_cmd_req_hdr hdr;
u8 rsvd0[24];
u16 phy_type;
u16 interface_type;
u32 misc_params;
- u32 future_use[4];
+ u16 ext_phy_details;
+ u16 rsvd;
+ u16 auto_speeds_supported;
+ u16 fixed_speeds_supported;
+ u32 future_use[2];
};
struct be_cmd_resp_get_phy_info {
struct be_dma_mem *nonemb_cmd);
extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
u8 loopback_type, u8 enable);
-extern int be_cmd_get_phy_info(struct be_adapter *adapter,
- struct be_phy_info *phy_info);
+extern int be_cmd_get_phy_info(struct be_adapter *adapter);
extern int be_cmd_set_qos(struct be_adapter *adapter, u32 bps, u32 domain);
extern void be_detect_dump_ue(struct be_adapter *adapter);
extern int be_cmd_get_die_temperature(struct be_adapter *adapter);
}
}
+static u32 be_get_port_type(u32 phy_type, u32 dac_cable_len)
+{
+ u32 port;
+
+ switch (phy_type) {
+ case PHY_TYPE_BASET_1GB:
+ case PHY_TYPE_BASEX_1GB:
+ case PHY_TYPE_SGMII:
+ port = PORT_TP;
+ break;
+ case PHY_TYPE_SFP_PLUS_10GB:
+ port = dac_cable_len ? PORT_DA : PORT_FIBRE;
+ break;
+ case PHY_TYPE_XFP_10GB:
+ case PHY_TYPE_SFP_1GB:
+ port = PORT_FIBRE;
+ break;
+ case PHY_TYPE_BASET_10GB:
+ port = PORT_TP;
+ break;
+ default:
+ port = PORT_OTHER;
+ }
+
+ return port;
+}
+
+static u32 convert_to_et_setting(u32 if_type, u32 if_speeds)
+{
+ u32 val = 0;
+
+ switch (if_type) {
+ case PHY_TYPE_BASET_1GB:
+ case PHY_TYPE_BASEX_1GB:
+ case PHY_TYPE_SGMII:
+ val |= SUPPORTED_TP;
+ if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
+ val |= SUPPORTED_1000baseT_Full;
+ if (if_speeds & BE_SUPPORTED_SPEED_100MBPS)
+ val |= SUPPORTED_100baseT_Full;
+ if (if_speeds & BE_SUPPORTED_SPEED_10MBPS)
+ val |= SUPPORTED_10baseT_Full;
+ break;
+ case PHY_TYPE_KX4_10GB:
+ val |= SUPPORTED_Backplane;
+ if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
+ val |= SUPPORTED_1000baseKX_Full;
+ if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
+ val |= SUPPORTED_10000baseKX4_Full;
+ break;
+ case PHY_TYPE_KR_10GB:
+ val |= SUPPORTED_Backplane |
+ SUPPORTED_10000baseKR_Full;
+ break;
+ case PHY_TYPE_SFP_PLUS_10GB:
+ case PHY_TYPE_XFP_10GB:
+ case PHY_TYPE_SFP_1GB:
+ val |= SUPPORTED_FIBRE;
+ if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
+ val |= SUPPORTED_10000baseT_Full;
+ if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
+ val |= SUPPORTED_1000baseT_Full;
+ break;
+ case PHY_TYPE_BASET_10GB:
+ val |= SUPPORTED_TP;
+ if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
+ val |= SUPPORTED_10000baseT_Full;
+ if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
+ val |= SUPPORTED_1000baseT_Full;
+ if (if_speeds & BE_SUPPORTED_SPEED_100MBPS)
+ val |= SUPPORTED_100baseT_Full;
+ break;
+ default:
+ val |= SUPPORTED_TP;
+ }
+
+ return val;
+}
+
+static int convert_to_et_speed(u32 be_speed)
+{
+ int et_speed = SPEED_10000;
+
+ switch (be_speed) {
+ case PHY_LINK_SPEED_10MBPS:
+ et_speed = SPEED_10;
+ break;
+ case PHY_LINK_SPEED_100MBPS:
+ et_speed = SPEED_100;
+ break;
+ case PHY_LINK_SPEED_1GBPS:
+ et_speed = SPEED_1000;
+ break;
+ case PHY_LINK_SPEED_10GBPS:
+ et_speed = SPEED_10000;
+ break;
+ }
+
+ return et_speed;
+}
+
+bool be_pause_supported(struct be_adapter *adapter)
+{
+ return (adapter->phy.interface_type == PHY_TYPE_SFP_PLUS_10GB ||
+ adapter->phy.interface_type == PHY_TYPE_XFP_10GB) ?
+ false : true;
+}
+
static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
struct be_adapter *adapter = netdev_priv(netdev);
- struct be_phy_info phy_info;
- u8 mac_speed = 0;
+ u8 port_speed = 0;
u16 link_speed = 0;
u8 link_status;
+ u32 et_speed = 0;
int status;
- if ((adapter->link_speed < 0) || (!(netdev->flags & IFF_UP))) {
- status = be_cmd_link_status_query(adapter, &mac_speed,
- &link_speed, &link_status, 0);
- if (!status)
- be_link_status_update(adapter, link_status);
-
- /* link_speed is in units of 10 Mbps */
- if (link_speed) {
- ethtool_cmd_speed_set(ecmd, link_speed*10);
+ if (adapter->phy.link_speed < 0 || !(netdev->flags & IFF_UP)) {
+ if (adapter->phy.forced_port_speed < 0) {
+ status = be_cmd_link_status_query(adapter, &port_speed,
+ &link_speed, &link_status, 0);
+ if (!status)
+ be_link_status_update(adapter, link_status);
+ if (link_speed)
+ et_speed = link_speed;
+ else
+ et_speed = convert_to_et_speed(port_speed);
} else {
- switch (mac_speed) {
- case PHY_LINK_SPEED_10MBPS:
- ethtool_cmd_speed_set(ecmd, SPEED_10);
- break;
- case PHY_LINK_SPEED_100MBPS:
- ethtool_cmd_speed_set(ecmd, SPEED_100);
- break;
- case PHY_LINK_SPEED_1GBPS:
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
- break;
- case PHY_LINK_SPEED_10GBPS:
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
- break;
- case PHY_LINK_SPEED_ZERO:
- ethtool_cmd_speed_set(ecmd, 0);
- break;
- }
+ et_speed = adapter->phy.forced_port_speed;
}
- status = be_cmd_get_phy_info(adapter, &phy_info);
- if (!status) {
- switch (phy_info.interface_type) {
- case PHY_TYPE_XFP_10GB:
- case PHY_TYPE_SFP_1GB:
- case PHY_TYPE_SFP_PLUS_10GB:
- ecmd->port = PORT_FIBRE;
- break;
- default:
- ecmd->port = PORT_TP;
- break;
- }
+ ethtool_cmd_speed_set(ecmd, et_speed);
+
+ status = be_cmd_get_phy_info(adapter);
+ if (status)
+ return status;
+
+ ecmd->supported =
+ convert_to_et_setting(adapter->phy.interface_type,
+ adapter->phy.auto_speeds_supported |
+ adapter->phy.fixed_speeds_supported);
+ ecmd->advertising =
+ convert_to_et_setting(adapter->phy.interface_type,
+ adapter->phy.auto_speeds_supported);
- switch (phy_info.interface_type) {
- case PHY_TYPE_KR_10GB:
- case PHY_TYPE_KX4_10GB:
- ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->port = be_get_port_type(adapter->phy.interface_type,
+ adapter->phy.dac_cable_len);
+
+ if (adapter->phy.auto_speeds_supported) {
+ ecmd->supported |= SUPPORTED_Autoneg;
+ ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ }
+
+ if (be_pause_supported(adapter)) {
+ ecmd->supported |= SUPPORTED_Pause;
+ ecmd->advertising |= ADVERTISED_Pause;
+ }
+
+ switch (adapter->phy.interface_type) {
+ case PHY_TYPE_KR_10GB:
+ case PHY_TYPE_KX4_10GB:
ecmd->transceiver = XCVR_INTERNAL;
- break;
- default:
- ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->transceiver = XCVR_EXTERNAL;
- break;
- }
+ break;
+ default:
+ ecmd->transceiver = XCVR_EXTERNAL;
+ break;
}
/* Save for future use */
- adapter->link_speed = ethtool_cmd_speed(ecmd);
- adapter->port_type = ecmd->port;
- adapter->transceiver = ecmd->transceiver;
- adapter->autoneg = ecmd->autoneg;
+ adapter->phy.link_speed = ethtool_cmd_speed(ecmd);
+ adapter->phy.port_type = ecmd->port;
+ adapter->phy.transceiver = ecmd->transceiver;
+ adapter->phy.autoneg = ecmd->autoneg;
+ adapter->phy.advertising = ecmd->advertising;
+ adapter->phy.supported = ecmd->supported;
} else {
- ethtool_cmd_speed_set(ecmd, adapter->link_speed);
- ecmd->port = adapter->port_type;
- ecmd->transceiver = adapter->transceiver;
- ecmd->autoneg = adapter->autoneg;
+ ethtool_cmd_speed_set(ecmd, adapter->phy.link_speed);
+ ecmd->port = adapter->phy.port_type;
+ ecmd->transceiver = adapter->phy.transceiver;
+ ecmd->autoneg = adapter->phy.autoneg;
+ ecmd->advertising = adapter->phy.advertising;
+ ecmd->supported = adapter->phy.supported;
}
ecmd->duplex = DUPLEX_FULL;
ecmd->phy_address = adapter->port_num;
- switch (ecmd->port) {
- case PORT_FIBRE:
- ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
- break;
- case PORT_TP:
- ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
- break;
- case PORT_AUI:
- ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI);
- break;
- }
-
- if (ecmd->autoneg) {
- ecmd->supported |= SUPPORTED_1000baseT_Full;
- ecmd->supported |= SUPPORTED_Autoneg;
- ecmd->advertising |= (ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full);
- }
return 0;
}
struct be_adapter *adapter = netdev_priv(netdev);
be_cmd_get_flow_control(adapter, &ecmd->tx_pause, &ecmd->rx_pause);
- ecmd->autoneg = 0;
+ ecmd->autoneg = adapter->phy.fc_autoneg;
}
static int
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff