#include <asm/oprofile_impl.h>
#include <asm/cputable.h>
+#include <asm/prom.h> /* for PTRRELOC on ARCH=ppc */
struct cpu_spec* cur_cpu_spec = NULL;
EXPORT_SYMBOL(cur_cpu_spec);
#define PPC_FEATURE_SPE_COMP 0
#endif
-struct cpu_spec cpu_specs[] = {
+static struct cpu_spec cpu_specs[] = {
#ifdef CONFIG_PPC64
{ /* Power3 */
.pvr_mask = 0xffff0000,
#endif /* !CLASSIC_PPC */
#endif /* CONFIG_PPC32 */
};
+
+struct cpu_spec *identify_cpu(unsigned long offset)
+{
+ struct cpu_spec *s = cpu_specs;
+ struct cpu_spec **cur = &cur_cpu_spec;
+ unsigned int pvr = mfspr(SPRN_PVR);
+ int i;
+
+ s = PTRRELOC(s);
+ cur = PTRRELOC(cur);
+
+ if (*cur != NULL)
+ return PTRRELOC(*cur);
+
+ for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++)
+ if ((pvr & s->pvr_mask) == s->pvr_value) {
+ *cur = cpu_specs + i;
+#ifdef CONFIG_PPC64
+ /* ppc64 expects identify_cpu to also call setup_cpu
+ * for that processor. I will consolidate that at a
+ * later time, for now, just use our friend #ifdef.
+ * we also don't need to PTRRELOC the function pointer
+ * on ppc64 as we are running at 0 in real mode.
+ */
+ if (s->cpu_setup) {
+ s->cpu_setup(offset, s);
+ }
+#endif /* CONFIG_PPC64 */
+ return s;
+ }
+ BUG();
+ return NULL;
+}
+
+void do_feature_fixups(unsigned long offset, unsigned long value,
+ void *fixup_start, void *fixup_end)
+{
+ struct fixup_entry {
+ unsigned long mask;
+ unsigned long value;
+ unsigned int *start;
+ unsigned int *end;
+ } *fcur, *fend;
+
+ fcur = fixup_start;
+ fend = fixup_end;
+
+ for (; fcur < fend; fcur++) {
+ unsigned int *pstart, *pend, *p;
+
+ if ((value & fcur->mask) == fcur->value)
+ continue;
+
+ /* These PTRRELOCs will disappear once the new scheme for
+ * modules and vdso is implemented
+ */
+ pstart = PTRRELOC(fcur->start);
+ pend = PTRRELOC(fcur->end);
+
+ for (p = pstart; p < pend; p++) {
+ *p = 0x60000000u;
+ asm volatile ("dcbst 0, %0" : : "r" (p));
+ }
+ asm volatile ("sync" : : : "memory");
+ for (p = pstart; p < pend; p++)
+ asm volatile ("icbi 0,%0" : : "r" (p));
+ asm volatile ("sync; isync" : : : "memory");
+ }
+}
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- LOAD_REG_IMMEDIATE(r3,cpu_specs)
- LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
- li r5,0
- bl .identify_cpu
-
LOAD_REG_IMMEDIATE(r2,__toc_start)
addi r2,r2,0x4000
addi r2,r2,0x4000
addi r2,r2,0x4000
add r2,r2,r26
- LOAD_REG_IMMEDIATE(r3, cpu_specs)
- add r3,r3,r26
- LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
- add r4,r4,r26
- mr r5,r26
- bl .identify_cpu
-
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- /* Apply the CPUs-specific fixups (nop out sections not relevant
- * to this CPU
- */
- li r3,0
- bl .do_cpu_ftr_fixups
- bl .do_fw_ftr_fixups
-
/* ptr to current */
LOAD_REG_IMMEDIATE(r4, init_task)
std r4,PACACURRENT(r13)
mtlr r11
blr
-/*
- * identify_cpu,
- * called with r3 = data offset and r4 = CPU number
- * doesn't change r3
- */
-_GLOBAL(identify_cpu)
- addis r8,r3,cpu_specs@ha
- addi r8,r8,cpu_specs@l
- mfpvr r7
-1:
- lwz r5,CPU_SPEC_PVR_MASK(r8)
- and r5,r5,r7
- lwz r6,CPU_SPEC_PVR_VALUE(r8)
- cmplw 0,r6,r5
- beq 1f
- addi r8,r8,CPU_SPEC_ENTRY_SIZE
- b 1b
-1:
- addis r6,r3,cur_cpu_spec@ha
- addi r6,r6,cur_cpu_spec@l
- sub r8,r8,r3
- stw r8,0(r6)
- blr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
- /* Get CPU 0 features */
- addis r6,r3,cur_cpu_spec@ha
- addi r6,r6,cur_cpu_spec@l
- lwz r4,0(r6)
- add r4,r4,r3
- lwz r4,CPU_SPEC_FEATURES(r4)
-
- /* Get the fixup table */
- addis r6,r3,__start___ftr_fixup@ha
- addi r6,r6,__start___ftr_fixup@l
- addis r7,r3,__stop___ftr_fixup@ha
- addi r7,r7,__stop___ftr_fixup@l
-
- /* Do the fixup */
-1: cmplw 0,r6,r7
- bgelr
- addi r6,r6,16
- lwz r8,-16(r6) /* mask */
- and r8,r8,r4
- lwz r9,-12(r6) /* value */
- cmplw 0,r8,r9
- beq 1b
- lwz r8,-8(r6) /* section begin */
- lwz r9,-4(r6) /* section end */
- subf. r9,r8,r9
- beq 1b
- /* write nops over the section of code */
- /* todo: if large section, add a branch at the start of it */
- srwi r9,r9,2
- mtctr r9
- add r8,r8,r3
- lis r0,0x60000000@h /* nop */
-3: stw r0,0(r8)
- andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
- beq 2f
- dcbst 0,r8 /* suboptimal, but simpler */
- sync
- icbi 0,r8
-2: addi r8,r8,4
- bdnz 3b
- sync /* additional sync needed on g4 */
- isync
- b 1b
-
/*
* call_setup_cpu - call the setup_cpu function for this cpu
* r3 = data offset, r24 = cpu number
isync
blr
-/*
- * identify_cpu and calls setup_cpu
- * In: r3 = base of the cpu_specs array
- * r4 = address of cur_cpu_spec
- * r5 = relocation offset
- */
-_GLOBAL(identify_cpu)
- mfpvr r7
-1:
- lwz r8,CPU_SPEC_PVR_MASK(r3)
- and r8,r8,r7
- lwz r9,CPU_SPEC_PVR_VALUE(r3)
- cmplw 0,r9,r8
- beq 1f
- addi r3,r3,CPU_SPEC_ENTRY_SIZE
- b 1b
-1:
- sub r0,r3,r5
- std r0,0(r4)
- ld r4,CPU_SPEC_SETUP(r3)
- cmpdi 0,r4,0
- add r4,r4,r5
- beqlr
- ld r4,0(r4)
- add r4,r4,r5
- mtctr r4
- /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */
- mr r4,r3
- mr r3,r5
- bctr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
- /* Get CPU 0 features */
- LOAD_REG_IMMEDIATE(r6,cur_cpu_spec)
- sub r6,r6,r3
- ld r4,0(r6)
- sub r4,r4,r3
- ld r4,CPU_SPEC_FEATURES(r4)
- /* Get the fixup table */
- LOAD_REG_IMMEDIATE(r6,__start___ftr_fixup)
- sub r6,r6,r3
- LOAD_REG_IMMEDIATE(r7,__stop___ftr_fixup)
- sub r7,r7,r3
- /* Do the fixup */
-1: cmpld r6,r7
- bgelr
- addi r6,r6,32
- ld r8,-32(r6) /* mask */
- and r8,r8,r4
- ld r9,-24(r6) /* value */
- cmpld r8,r9
- beq 1b
- ld r8,-16(r6) /* section begin */
- ld r9,-8(r6) /* section end */
- subf. r9,r8,r9
- beq 1b
- /* write nops over the section of code */
- /* todo: if large section, add a branch at the start of it */
- srwi r9,r9,2
- mtctr r9
- sub r8,r8,r3
- lis r0,0x60000000@h /* nop */
-3: stw r0,0(r8)
- andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
- beq 2f
- dcbst 0,r8 /* suboptimal, but simpler */
- sync
- icbi 0,r8
-2: addi r8,r8,4
- bdnz 3b
- sync /* additional sync needed on g4 */
- isync
- b 1b
-
-/*
- * do_fw_ftr_fixups - goes through the list of firmware feature fixups
- * and writes nop's over sections of code that don't apply for this firmware.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_fw_ftr_fixups)
- /* Get firmware features */
- LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features)
- sub r6,r6,r3
- ld r4,0(r6)
- /* Get the fixup table */
- LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup)
- sub r6,r6,r3
- LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup)
- sub r7,r7,r3
- /* Do the fixup */
-1: cmpld r6,r7
- bgelr
- addi r6,r6,32
- ld r8,-32(r6) /* mask */
- and r8,r8,r4
- ld r9,-24(r6) /* value */
- cmpld r8,r9
- beq 1b
- ld r8,-16(r6) /* section begin */
- ld r9,-8(r6) /* section end */
- subf. r9,r8,r9
- beq 1b
- /* write nops over the section of code */
- /* todo: if large section, add a branch at the start of it */
- srwi r9,r9,2
- mtctr r9
- sub r8,r8,r3
- lis r0,0x60000000@h /* nop */
-3: stw r0,0(r8)
-BEGIN_FTR_SECTION
- dcbst 0,r8 /* suboptimal, but simpler */
- sync
- icbi 0,r8
-END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE)
- addi r8,r8,4
- bdnz 3b
- sync /* additional sync needed on g4 */
- isync
- b 1b
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
/*
unsigned long __init early_init(unsigned long dt_ptr)
{
unsigned long offset = reloc_offset();
+ struct cpu_spec *spec;
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
- identify_cpu(offset, 0);
- do_cpu_ftr_fixups(offset);
+ spec = identify_cpu(offset);
+
+ do_feature_fixups(offset, spec->cpu_features,
+ PTRRELOC(&__start___ftr_fixup),
+ PTRRELOC(&__stop___ftr_fixup));
return KERNELBASE + offset;
}
void __init early_setup(unsigned long dt_ptr)
{
+ /* Identify CPU type */
+ identify_cpu(0);
+
/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
setup_paca(0);
{
DBG(" -> setup_system()\n");
+ /* Apply the CPUs-specific and firmware specific fixups to kernel
+ * text (nop out sections not relevant to this CPU or this firmware)
+ */
+ do_feature_fixups(0, cur_cpu_spec->cpu_features,
+ &__start___ftr_fixup, &__stop___ftr_fixup);
+ do_feature_fixups(0, powerpc_firmware_features,
+ &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
+
/*
* Unflatten the device-tree passed by prom_init or kexec
*/
{
unsigned long phys_mem_size;
+ /* Identify CPU type. This is done again by the common code later
+ * on but calling this function multiple times is fine.
+ */
+ identify_cpu(0);
+
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
mtlr r11
blr
-/*
- * identify_cpu,
- * called with r3 = data offset and r4 = CPU number
- * doesn't change r3
- */
-_GLOBAL(identify_cpu)
- addis r8,r3,cpu_specs@ha
- addi r8,r8,cpu_specs@l
- mfpvr r7
-1:
- lwz r5,CPU_SPEC_PVR_MASK(r8)
- and r5,r5,r7
- lwz r6,CPU_SPEC_PVR_VALUE(r8)
- cmplw 0,r6,r5
- beq 1f
- addi r8,r8,CPU_SPEC_ENTRY_SIZE
- b 1b
-1:
- addis r6,r3,cur_cpu_spec@ha
- addi r6,r6,cur_cpu_spec@l
- sub r8,r8,r3
- stw r8,0(r6)
- blr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
- /* Get CPU 0 features */
- addis r6,r3,cur_cpu_spec@ha
- addi r6,r6,cur_cpu_spec@l
- lwz r4,0(r6)
- add r4,r4,r3
- lwz r4,CPU_SPEC_FEATURES(r4)
-
- /* Get the fixup table */
- addis r6,r3,__start___ftr_fixup@ha
- addi r6,r6,__start___ftr_fixup@l
- addis r7,r3,__stop___ftr_fixup@ha
- addi r7,r7,__stop___ftr_fixup@l
-
- /* Do the fixup */
-1: cmplw 0,r6,r7
- bgelr
- addi r6,r6,16
- lwz r8,-16(r6) /* mask */
- and r8,r8,r4
- lwz r9,-12(r6) /* value */
- cmplw 0,r8,r9
- beq 1b
- lwz r8,-8(r6) /* section begin */
- lwz r9,-4(r6) /* section end */
- subf. r9,r8,r9
- beq 1b
- /* write nops over the section of code */
- /* todo: if large section, add a branch at the start of it */
- srwi r9,r9,2
- mtctr r9
- add r8,r8,r3
- lis r0,0x60000000@h /* nop */
-3: stw r0,0(r8)
- andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
- beq 2f
- dcbst 0,r8 /* suboptimal, but simpler */
- sync
- icbi 0,r8
-2: addi r8,r8,4
- bdnz 3b
- sync /* additional sync needed on g4 */
- isync
- b 1b
-
/*
* call_setup_cpu - call the setup_cpu function for this cpu
* r3 = data offset, r24 = cpu number
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/ocp.h>
+#include <asm/prom.h>
#define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \
defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
extern void platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7);
-extern void identify_cpu(unsigned long offset, unsigned long cpu);
-extern void do_cpu_ftr_fixups(unsigned long offset);
extern void reloc_got2(unsigned long offset);
extern void ppc6xx_idle(void);
{
unsigned long phys;
unsigned long offset = reloc_offset();
+ struct cpu_spec *spec;
/* Default */
phys = offset + KERNELBASE;
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
- identify_cpu(offset, 0);
- do_cpu_ftr_fixups(offset);
+ spec = identify_cpu(offset);
+ do_feature_fixups(offset, spec->cpu_features,
+ PTRRELOC(&__start___ftr_fixup),
+ PTRRELOC(&__stop___ftr_fixup));
return phys;
}
extern struct cpu_spec *cur_cpu_spec;
-extern void identify_cpu(unsigned long offset, unsigned long cpu);
-extern void do_cpu_ftr_fixups(unsigned long offset);
+extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
+
+extern struct cpu_spec *identify_cpu(unsigned long offset);
+extern void do_feature_fixups(unsigned long offset, unsigned long value,
+ void *fixup_start, void *fixup_end);
#endif /* __ASSEMBLY__ */
/* This is true if we are using the firmware NMI handler (typically LPAR) */
extern int fwnmi_active;
+extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
+
#else /* __ASSEMBLY__ */
#define BEGIN_FW_FTR_SECTION 96:
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff