There are several duplicate definitions in cciss_cmd.h and cciss_ioctl.h.
Consolidate these into the new cciss_defs.h file. This patch doesn't change
the definitions exposed under include/linux, so userspace apps shouldn't
be affected.
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: dann frazier <dannf@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
#ifndef CCISS_CMD_H
#define CCISS_CMD_H
+
+#include <linux/cciss_defs.h>
+
/* DEFINES */
#define CISS_VERSION "1.00"
/* general boundary definitions */
-#define SENSEINFOBYTES 32 /* note that this value may vary
- between host implementations */
#define MAXSGENTRIES 32
#define CCISS_SG_CHAIN 0x80000000
#define MAXREPLYQS 256
-/* Command Status value */
-#define CMD_SUCCESS 0x0000
-#define CMD_TARGET_STATUS 0x0001
-#define CMD_DATA_UNDERRUN 0x0002
-#define CMD_DATA_OVERRUN 0x0003
-#define CMD_INVALID 0x0004
-#define CMD_PROTOCOL_ERR 0x0005
-#define CMD_HARDWARE_ERR 0x0006
-#define CMD_CONNECTION_LOST 0x0007
-#define CMD_ABORTED 0x0008
-#define CMD_ABORT_FAILED 0x0009
-#define CMD_UNSOLICITED_ABORT 0x000A
-#define CMD_TIMEOUT 0x000B
-#define CMD_UNABORTABLE 0x000C
-
/* Unit Attentions ASC's as defined for the MSA2012sa */
#define POWER_OR_RESET 0x29
#define STATE_CHANGED 0x2a
#define ASYM_ACCESS_CHANGED 0x06
#define LUN_CAPACITY_CHANGED 0x09
-/* transfer direction */
-#define XFER_NONE 0x00
-#define XFER_WRITE 0x01
-#define XFER_READ 0x02
-#define XFER_RSVD 0x03
-
-/* task attribute */
-#define ATTR_UNTAGGED 0x00
-#define ATTR_SIMPLE 0x04
-#define ATTR_HEADOFQUEUE 0x05
-#define ATTR_ORDERED 0x06
-#define ATTR_ACA 0x07
-
-/* cdb type */
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
-
/* config space register offsets */
#define CFG_VENDORID 0x00
#define CFG_DEVICEID 0x02
} u64bit;
/* Type defs used in the following structs */
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
#define QWORD vals32
/* STRUCTURES */
-#define CISS_MAX_LUN 1024
#define CISS_MAX_PHYS_LUN 1024
/* SCSI-3 Cmmands */
#define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */
/* Command List Structure */
-typedef union _SCSI3Addr_struct {
- struct {
- BYTE Dev;
- BYTE Bus:6;
- BYTE Mode:2; /* b00 */
- } PeripDev;
- struct {
- BYTE DevLSB;
- BYTE DevMSB:6;
- BYTE Mode:2; /* b01 */
- } LogDev;
- struct {
- BYTE Dev:5;
- BYTE Bus:3;
- BYTE Targ:6;
- BYTE Mode:2; /* b10 */
- } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
- DWORD TargetId:24;
- DWORD Bus:6;
- DWORD Mode:2;
- SCSI3Addr_struct Target[2]; /* 2 level target device addr */
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
- DWORD VolId:30;
- DWORD Mode:2;
- BYTE reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
- BYTE LunAddrBytes[8];
- SCSI3Addr_struct SCSI3Lun[4];
- PhysDevAddr_struct PhysDev;
- LogDevAddr_struct LogDev;
-} LUNAddr_struct;
-
#define CTLR_LUNID "\0\0\0\0\0\0\0\0"
typedef struct _CommandListHeader_struct {
QWORD Tag;
LUNAddr_struct LUN;
} CommandListHeader_struct;
-typedef struct _RequestBlock_struct {
- BYTE CDBLen;
- struct {
- BYTE Type:3;
- BYTE Attribute:3;
- BYTE Direction:2;
- } Type;
- HWORD Timeout;
- BYTE CDB[16];
-} RequestBlock_struct;
typedef struct _ErrDescriptor_struct {
QWORD Addr;
DWORD Len;
DWORD Ext;
} SGDescriptor_struct;
-typedef union _MoreErrInfo_struct{
- struct {
- BYTE Reserved[3];
- BYTE Type;
- DWORD ErrorInfo;
- }Common_Info;
- struct{
- BYTE Reserved[2];
- BYTE offense_size; /* size of offending entry */
- BYTE offense_num; /* byte # of offense 0-base */
- DWORD offense_value;
- }Invalid_Cmd;
-}MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
- BYTE ScsiStatus;
- BYTE SenseLen;
- HWORD CommandStatus;
- DWORD ResidualCnt;
- MoreErrInfo_struct MoreErrInfo;
- BYTE SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
/* Command types */
#define CMD_RWREQ 0x00
#define CMD_IOCTL_PEND 0x01
--- /dev/null
+#ifndef CCISS_DEFS_H
+#define CCISS_DEFS_H
+
+#include <linux/types.h>
+
+/* general boundary definitions */
+#define SENSEINFOBYTES 32 /* note that this value may vary
+ between host implementations */
+
+/* Command Status value */
+#define CMD_SUCCESS 0x0000
+#define CMD_TARGET_STATUS 0x0001
+#define CMD_DATA_UNDERRUN 0x0002
+#define CMD_DATA_OVERRUN 0x0003
+#define CMD_INVALID 0x0004
+#define CMD_PROTOCOL_ERR 0x0005
+#define CMD_HARDWARE_ERR 0x0006
+#define CMD_CONNECTION_LOST 0x0007
+#define CMD_ABORTED 0x0008
+#define CMD_ABORT_FAILED 0x0009
+#define CMD_UNSOLICITED_ABORT 0x000A
+#define CMD_TIMEOUT 0x000B
+#define CMD_UNABORTABLE 0x000C
+
+/* transfer direction */
+#define XFER_NONE 0x00
+#define XFER_WRITE 0x01
+#define XFER_READ 0x02
+#define XFER_RSVD 0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED 0x00
+#define ATTR_SIMPLE 0x04
+#define ATTR_HEADOFQUEUE 0x05
+#define ATTR_ORDERED 0x06
+#define ATTR_ACA 0x07
+
+/* cdb type */
+#define TYPE_CMD 0x00
+#define TYPE_MSG 0x01
+
+/* Type defs used in the following structs */
+#define BYTE __u8
+#define WORD __u16
+#define HWORD __u16
+#define DWORD __u32
+
+#define CISS_MAX_LUN 1024
+
+#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
+#define LEVEL3LUN 0
+
+#pragma pack(1)
+
+/* Command List Structure */
+typedef union _SCSI3Addr_struct {
+ struct {
+ BYTE Dev;
+ BYTE Bus:6;
+ BYTE Mode:2; /* b00 */
+ } PeripDev;
+ struct {
+ BYTE DevLSB;
+ BYTE DevMSB:6;
+ BYTE Mode:2; /* b01 */
+ } LogDev;
+ struct {
+ BYTE Dev:5;
+ BYTE Bus:3;
+ BYTE Targ:6;
+ BYTE Mode:2; /* b10 */
+ } LogUnit;
+} SCSI3Addr_struct;
+
+typedef struct _PhysDevAddr_struct {
+ DWORD TargetId:24;
+ DWORD Bus:6;
+ DWORD Mode:2;
+ SCSI3Addr_struct Target[2]; /* 2 level target device addr */
+} PhysDevAddr_struct;
+
+typedef struct _LogDevAddr_struct {
+ DWORD VolId:30;
+ DWORD Mode:2;
+ BYTE reserved[4];
+} LogDevAddr_struct;
+
+typedef union _LUNAddr_struct {
+ BYTE LunAddrBytes[8];
+ SCSI3Addr_struct SCSI3Lun[4];
+ PhysDevAddr_struct PhysDev;
+ LogDevAddr_struct LogDev;
+} LUNAddr_struct;
+
+typedef struct _RequestBlock_struct {
+ BYTE CDBLen;
+ struct {
+ BYTE Type:3;
+ BYTE Attribute:3;
+ BYTE Direction:2;
+ } Type;
+ HWORD Timeout;
+ BYTE CDB[16];
+} RequestBlock_struct;
+
+typedef union _MoreErrInfo_struct{
+ struct {
+ BYTE Reserved[3];
+ BYTE Type;
+ DWORD ErrorInfo;
+ } Common_Info;
+ struct{
+ BYTE Reserved[2];
+ BYTE offense_size; /* size of offending entry */
+ BYTE offense_num; /* byte # of offense 0-base */
+ DWORD offense_value;
+ } Invalid_Cmd;
+} MoreErrInfo_struct;
+typedef struct _ErrorInfo_struct {
+ BYTE ScsiStatus;
+ BYTE SenseLen;
+ HWORD CommandStatus;
+ DWORD ResidualCnt;
+ MoreErrInfo_struct MoreErrInfo;
+ BYTE SenseInfo[SENSEINFOBYTES];
+} ErrorInfo_struct;
+
+#pragma pack()
+
+#endif /* CCISS_DEFS_H */
#include <linux/types.h>
#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
#define CCISS_IOC_MAGIC 'B'
#define MAX_KMALLOC_SIZE 128000
-#ifndef CCISS_CMD_H
-/* This defines are duplicated in cciss_cmd.h in the driver directory */
-
-/* general boundary definitions */
-#define SENSEINFOBYTES 32 /* note that this value may vary
- between host implementations */
-
-/* Command Status value */
-#define CMD_SUCCESS 0x0000
-#define CMD_TARGET_STATUS 0x0001
-#define CMD_DATA_UNDERRUN 0x0002
-#define CMD_DATA_OVERRUN 0x0003
-#define CMD_INVALID 0x0004
-#define CMD_PROTOCOL_ERR 0x0005
-#define CMD_HARDWARE_ERR 0x0006
-#define CMD_CONNECTION_LOST 0x0007
-#define CMD_ABORTED 0x0008
-#define CMD_ABORT_FAILED 0x0009
-#define CMD_UNSOLICITED_ABORT 0x000A
-#define CMD_TIMEOUT 0x000B
-#define CMD_UNABORTABLE 0x000C
-
-/* transfer direction */
-#define XFER_NONE 0x00
-#define XFER_WRITE 0x01
-#define XFER_READ 0x02
-#define XFER_RSVD 0x03
-
-/* task attribute */
-#define ATTR_UNTAGGED 0x00
-#define ATTR_SIMPLE 0x04
-#define ATTR_HEADOFQUEUE 0x05
-#define ATTR_ORDERED 0x06
-#define ATTR_ACA 0x07
-
-/* cdb type */
-#define TYPE_CMD 0x00
-#define TYPE_MSG 0x01
-
-/* Type defs used in the following structs */
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
-
-#define CISS_MAX_LUN 1024
-
-#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
-#define LEVEL3LUN 0
-
-#pragma pack(1)
-
-/* Command List Structure */
-typedef union _SCSI3Addr_struct {
- struct {
- BYTE Dev;
- BYTE Bus:6;
- BYTE Mode:2; /* b00 */
- } PeripDev;
- struct {
- BYTE DevLSB;
- BYTE DevMSB:6;
- BYTE Mode:2; /* b01 */
- } LogDev;
- struct {
- BYTE Dev:5;
- BYTE Bus:3;
- BYTE Targ:6;
- BYTE Mode:2; /* b10 */
- } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
- DWORD TargetId:24;
- DWORD Bus:6;
- DWORD Mode:2;
- SCSI3Addr_struct Target[2]; /* 2 level target device addr */
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
- DWORD VolId:30;
- DWORD Mode:2;
- BYTE reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
- BYTE LunAddrBytes[8];
- SCSI3Addr_struct SCSI3Lun[4];
- PhysDevAddr_struct PhysDev;
- LogDevAddr_struct LogDev;
-} LUNAddr_struct;
-
-typedef struct _RequestBlock_struct {
- BYTE CDBLen;
- struct {
- BYTE Type:3;
- BYTE Attribute:3;
- BYTE Direction:2;
- } Type;
- HWORD Timeout;
- BYTE CDB[16];
-} RequestBlock_struct;
-
-typedef union _MoreErrInfo_struct{
- struct {
- BYTE Reserved[3];
- BYTE Type;
- DWORD ErrorInfo;
- }Common_Info;
- struct{
- BYTE Reserved[2];
- BYTE offense_size; /* size of offending entry */
- BYTE offense_num; /* byte # of offense 0-base */
- DWORD offense_value;
- }Invalid_Cmd;
-}MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
- BYTE ScsiStatus;
- BYTE SenseLen;
- HWORD CommandStatus;
- DWORD ResidualCnt;
- MoreErrInfo_struct MoreErrInfo;
- BYTE SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
-#pragma pack()
-#endif /* CCISS_CMD_H */
-
typedef struct _IOCTL_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff