drm/i915: clean up vlv ->pre_pll_enable and pll enable sequence
authorDaniel Vetter <daniel.vetter@ffwll.ch>
Thu, 11 Jul 2013 20:13:42 +0000 (22:13 +0200)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Fri, 12 Jul 2013 16:54:01 +0000 (18:54 +0200)
No need to call the ->pre_pll_enable hook twice if we don't enable the
dpll too early. This should make Jani a bit less grumpy.

v2: Rebase on top of the newly-colored BUG_ONs.

v3: Reinstate the lost write of the DPLL_MD register, spotted by Imre.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_display.c

index b1b1d2a38fc9ea8e3c6764e3fcf913e1bfb8eecd..abaae78f0c52255b04289dc7a25d42e33343cbae 100644 (file)
@@ -1321,32 +1321,40 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
        assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
 }
 
-static void vlv_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+static void vlv_enable_pll(struct intel_crtc *crtc)
 {
-       int reg;
-       u32 val;
+       struct drm_device *dev = crtc->base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       int reg = DPLL(crtc->pipe);
+       u32 dpll = crtc->config.dpll_hw_state.dpll;
 
-       assert_pipe_disabled(dev_priv, pipe);
+       assert_pipe_disabled(dev_priv, crtc->pipe);
 
        /* No really, not for ILK+ */
        BUG_ON(!IS_VALLEYVIEW(dev_priv->dev));
 
        /* PLL is protected by panel, make sure we can write it */
        if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
-               assert_panel_unlocked(dev_priv, pipe);
+               assert_panel_unlocked(dev_priv, crtc->pipe);
 
-       reg = DPLL(pipe);
-       val = I915_READ(reg);
-       val |= DPLL_VCO_ENABLE;
+       I915_WRITE(reg, dpll);
+       POSTING_READ(reg);
+       udelay(150);
+
+       if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
+               DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe);
+
+       I915_WRITE(DPLL_MD(crtc->pipe), crtc->config.dpll_hw_state.dpll_md);
+       POSTING_READ(DPLL_MD(crtc->pipe));
 
        /* We do this three times for luck */
-       I915_WRITE(reg, val);
+       I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
-       I915_WRITE(reg, val);
+       I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
-       I915_WRITE(reg, val);
+       I915_WRITE(reg, dpll);
        POSTING_READ(reg);
        udelay(150); /* wait for warmup */
 }
@@ -3654,7 +3662,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
                if (encoder->pre_pll_enable)
                        encoder->pre_pll_enable(encoder);
 
-       vlv_enable_pll(dev_priv, pipe);
+       vlv_enable_pll(intel_crtc);
 
        for_each_encoder_on_crtc(dev, crtc, encoder)
                if (encoder->pre_enable)
@@ -4409,7 +4417,6 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 {
        struct drm_device *dev = crtc->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
-       struct intel_encoder *encoder;
        int pipe = crtc->pipe;
        u32 dpll, mdiv;
        u32 bestn, bestm1, bestm2, bestp1, bestp2;
@@ -4498,10 +4505,6 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 
        vlv_dpio_write(dev_priv, DPIO_PLL_CML(pipe), 0x87871000);
 
-       for_each_encoder_on_crtc(dev, &crtc->base, encoder)
-               if (encoder->pre_pll_enable)
-                       encoder->pre_pll_enable(encoder);
-
        /* Enable DPIO clock input */
        dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
                DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
@@ -4511,20 +4514,10 @@ static void vlv_update_pll(struct intel_crtc *crtc)
        dpll |= DPLL_VCO_ENABLE;
        crtc->config.dpll_hw_state.dpll = dpll;
 
-       I915_WRITE(DPLL(pipe), dpll);
-       POSTING_READ(DPLL(pipe));
-       udelay(150);
-
-       if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
-               DRM_ERROR("DPLL %d failed to lock\n", pipe);
-
        dpll_md = (crtc->config.pixel_multiplier - 1)
                << DPLL_MD_UDI_MULTIPLIER_SHIFT;
        crtc->config.dpll_hw_state.dpll_md = dpll_md;
 
-       I915_WRITE(DPLL_MD(pipe), dpll_md);
-       POSTING_READ(DPLL_MD(pipe));
-
        if (crtc->config.has_dp_encoder)
                intel_dp_set_m_n(crtc);