ARM: ux500: Disable Snowball's SMSC911x Ethernet when booting with ATAGs
authorLee Jones <lee.jones@linaro.org>
Mon, 19 Aug 2013 14:46:25 +0000 (15:46 +0100)
committerLinus Walleij <linus.walleij@linaro.org>
Thu, 26 Sep 2013 09:07:05 +0000 (11:07 +0200)
It's time to remove all ATAG support from ux500 and rely solely on
Device Tree booting. This patch is part of that endeavour.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
arch/arm/mach-ux500/board-mop500.c

index 6dcf023b0b96c61a0d981b0c2a6b113e9caa60a0..a1c433062f625aca3f5b6fd423228d17f9db2db9 100644 (file)
@@ -33,7 +33,6 @@
 #include <linux/mfd/abx500/ab8500-codec.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/input.h>
-#include <linux/smsc911x.h>
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
@@ -118,36 +117,6 @@ static struct ab8500_codec_platform_data ab8500_codec_pdata = {
        .ear_cmv = EAR_CMV_0_95V
 };
 
-static struct smsc911x_platform_config snowball_sbnet_cfg = {
-       .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-       .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-       .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-       .shift = 1,
-};
-
-static struct resource sbnet_res[] = {
-       {
-               .name = "smsc911x-memory",
-               .start = (0x5000 << 16),
-               .end  =  (0x5000 << 16) + 0xffff,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = NOMADIK_GPIO_TO_IRQ(140),
-               .end = NOMADIK_GPIO_TO_IRQ(140),
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-       },
-};
-
-static struct platform_device snowball_sbnet_dev = {
-       .name           = "smsc911x",
-       .num_resources  = ARRAY_SIZE(sbnet_res),
-       .resource       = sbnet_res,
-       .dev            = {
-               .platform_data = &snowball_sbnet_cfg,
-       },
-};
-
 struct ab8500_platform_data ab8500_platdata = {
        .irq_base       = MOP500_AB8500_IRQ_BASE,
        .regulator      = &ab8500_regulator_plat_data,
@@ -408,7 +377,6 @@ static void __init u8500_cryp1_hash1_init(struct device *parent)
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
-       &snowball_sbnet_dev,
        &snowball_gpio_en_3v3_regulator_dev,
        &u8500_cpufreq_cooling_device,
        &sdi0_regulator,